|
Replay Lite
|
|
Please note that the forum rules have changed. Posting of new codes is no longer allowed. See this thread for more information.
|
|
SeanieG
Newbie
|
22. April 2008 @ 19:41 |
Link to this message
|
Originally posted by BRIAN1956:
Originally posted by SeanieG:
Originally posted by thegift06:
have the new update 9.10 and it just stopped working before the Liverpool v Chelsea match. anyone with any suggestions.Cheers
Same for me. Had flashed 9.10 and set Auto-update on. Worked for about an hour and then stopped.
Any ideas (or codes?). At least the new interface looks better and I've got the EPG back...
Unplug the box, power it back up again and see what happens.
If you are still having problems...Reflash it it with the 910.
If you are still having problems go to this page 132 and flash as per my post there.
http://forums.afterdawn.com/thread_view.cfm/132/502990#3968017
Just for some feedback...did you flash the 910 straight on to 752?
I flashed straight from 9.10. I unplugged the box, powered it back up and everything now seems to be fine. Thanks Brian.
|
|
Advertisement
|
|
|
|
Junior Member
|
22. April 2008 @ 23:24 |
Link to this message
|
|
hi brian, unfortunatly cant give my gf the codes i have, im telepest, shes nhell..the 18 aprill 2008 auto roll codes are the ones she has but her box now scrambled. so need new nhell codes for uk. hope you can help. thanks
|
|
happyN
Newbie
|
23. April 2008 @ 03:42 |
Link to this message
|
Originally posted by reds05:
hi brian, unfortunatly cant give my gf the codes i have, im telepest, shes nhell..the 18 aprill 2008 auto roll codes are the ones she has but her box now scrambled. so need new nhell codes for uk. hope you can help. thanks
N TEE L uk prov id 0x55
key 0= 88 D4 F7 FE 5A 41 91 EC
key 1= F0 D9 2C F6 A8 D3 D1 2F
This message has been edited since posting. Last time this message was edited on 23. April 2008 @ 03:44
|
|
Mojo08
Newbie
|
23. April 2008 @ 06:49 |
Link to this message
|
Can anybody tell me what the 2 cables are that i need to flash a replay lite with a laptop??
The exact names of the cables i.e RS323 or null modem or usb etc etc.....
i have a null modem cable that i use for cloning from box to box but i hear this is no longer an option, is this true??
So what additional cable do i need.
Thanx in advance.
|
Senior Member
|
23. April 2008 @ 07:41 |
Link to this message
|
Originally posted by Mojo08:
Can anybody tell me what the 2 cables are that i need to flash a replay lite with a laptop??
The exact names of the cables i.e RS323 or null modem or usb etc etc.....
Null Modem Serial Cable 9-Pin Female to 9-Pin Female: Maplin Part# L71BT
USB to Serial 9-Pin Male Adaptor: Maplin Part# ZP43W
You can check them out on their Website but they are also available from the likes of Peats & Fleabay:
i have a null modem cable that i use for cloning from box to box but i hear this is no longer an option, is this true??
So what additional cable do i need.
Thanx in advance.
The cable you have used for cloning in the past is the correct cable & will do for upgrading the firmware on your Replay Lite.
If your Laptop has not got a 9 Pin Male Serial port you will also need to get a USB to Serial 9 Pin Male Adapter.
The Adapter connects to a available USB port on your Laptop & the Null Modem cable connects between that & the Replaqy Lie Box.
You will need to install the software drivers supplied with the Adapter in order for your Laptop to recognize it. You will then need to set the port number on your laptop to either COM1 or COM2.
Here's how to set the port on your PC/Laptop.
Do the following.
START
Right Click "MY COMPUTER"
Choose "MANAGE"
In the resulting window, click on "DEVICE MANAGER"
In the right hand pane, click on the little plus sign beside "PORTS" in the right hand pane.
Right click on the USB Adapter (Should be something like "Prolific USB-to-Serial Comm. Port (COM#)
Choose "Properties"
Click on "PORT SETTINGS" TAB
Click on "ADVANCED"
Then you will see the COM Port Number Box. You should be able to change it there using the drop down box.
Try to set it to COM2
Restart Windows
Set STBLink to COM2 & try to connect.
If that fails try COM1 as the port number.
|
Member
|
23. April 2008 @ 07:41 |
Link to this message
|
Originally posted by Mojo08:
Can anybody tell me what the 2 cables are that i need to flash a replay lite with a laptop??
The exact names of the cables i.e RS323 or null modem or usb etc etc.....
i have a null modem cable that i use for cloning from box to box but i hear this is no longer an option, is this true??
So what additional cable do i need.
Thanx in advance.
most new'ish lappys don't have serial ports which is why you can't use the null modem cable, you need to buy a USB to 9pin D serial cable, you should get a cd with it also,...you then have to assign it a port in your windows control panel,device manager,hardware, com ports settings.
|
|
Mojo08
Newbie
|
23. April 2008 @ 07:52 |
Link to this message
|
Originally posted by gman496:
Originally posted by Mojo08:
Can anybody tell me what the 2 cables are that i need to flash a replay lite with a laptop??
The exact names of the cables i.e RS323 or null modem or usb etc etc.....
Null Modem Serial Cable 9-Pin Female to 9-Pin Female: Maplin Part# L71BT
USB to Serial 9-Pin Male Adaptor: Maplin Part# ZP43W
You can check them out on their Website but they are also available from the likes of Peats & Fleabay:
i have a null modem cable that i use for cloning from box to box but i hear this is no longer an option, is this true??
So what additional cable do i need.
Thanx in advance.
The cable you have used for cloning in the past is the correct cable & will do for upgrading the firmware on your Replay Lite.
If your Laptop has not got a 9 Pin Male Serial port you will also need to get a USB to Serial 9 Pin Male Adapter.
The Adapter connects to a available USB port on your Laptop & the Null Modem cable connects between that & the Replaqy Lie Box.
You will need to install the software drivers supplied with the Adapter in order for your Laptop to recognize it. You will then need to set the port number on your laptop to either COM1 or COM2.
Here's how to set the port on your PC/Laptop.
Do the following.
START
Right Click "MY COMPUTER"
Choose "MANAGE"
In the resulting window, click on "DEVICE MANAGER"
In the right hand pane, click on the little plus sign beside "PORTS" in the right hand pane.
Right click on the USB Adapter (Should be something like "Prolific USB-to-Serial Comm. Port (COM#)
Choose "Properties"
Click on "PORT SETTINGS" TAB
Click on "ADVANCED"
Then you will see the COM Port Number Box. You should be able to change it there using the drop down box.
Try to set it to COM2
Restart Windows
Set STBLink to COM2 & try to connect.
If that fails try COM1 as the port number.
Cheers for the response, but i cant see "ports" in the right hand pane, there are many options there but "Ports" aint mentioned in any of them???
Also, its a female 15 pin connection i have on the back of my laptop.
|
Senior Member
|
23. April 2008 @ 08:23 |
Link to this message
|
Originally posted by Mojo08:
Originally posted by gman496:
Originally posted by Mojo08:
Can anybody tell me what the 2 cables are that i need to flash a replay lite with a laptop??
The exact names of the cables i.e RS323 or null modem or usb etc etc.....
Null Modem Serial Cable 9-Pin Female to 9-Pin Female: Maplin Part# L71BT
USB to Serial 9-Pin Male Adaptor: Maplin Part# ZP43W
You can check them out on their Website but they are also available from the likes of Peats & Fleabay:
i have a null modem cable that i use for cloning from box to box but i hear this is no longer an option, is this true??
So what additional cable do i need.
Thanx in advance.
The cable you have used for cloning in the past is the correct cable & will do for upgrading the firmware on your Replay Lite.
If your Laptop has not got a 9 Pin Male Serial port you will also need to get a USB to Serial 9 Pin Male Adapter.
The Adapter connects to a available USB port on your Laptop & the Null Modem cable connects between that & the Replaqy Lie Box.
You will need to install the software drivers supplied with the Adapter in order for your Laptop to recognize it. You will then need to set the port number on your laptop to either COM1 or COM2.
Here's how to set the port on your PC/Laptop.
Do the following.
START
Right Click "MY COMPUTER"
Choose "MANAGE"
In the resulting window, click on "DEVICE MANAGER"
In the right hand pane, click on the little plus sign beside "PORTS" in the right hand pane.
Right click on the USB Adapter (Should be something like "Prolific USB-to-Serial Comm. Port (COM#)
Choose "Properties"
Click on "PORT SETTINGS" TAB
Click on "ADVANCED"
Then you will see the COM Port Number Box. You should be able to change it there using the drop down box.
Try to set it to COM2
Restart Windows
Set STBLink to COM2 & try to connect.
If that fails try COM1 as the port number.
Cheers for the response, but i cant see "ports" in the right hand pane, there are many options there but "Ports" aint mentioned in any of them???
Also, its a female 15 pin connection i have on the back of my laptop.
The reason you don't see ports there now is because your Laptop does not have any serial ports onboard.
You will see "Ports" once you install the Adapter.
The 15 Pin female connector you referr to is for an external monitor it is NOT a Serial Port.
|
|
Mojo08
Newbie
|
23. April 2008 @ 08:32 |
Link to this message
|
Originally posted by gman496:
Originally posted by Mojo08:
Originally posted by gman496:
Originally posted by Mojo08:
Can anybody tell me what the 2 cables are that i need to flash a replay lite with a laptop??
The exact names of the cables i.e RS323 or null modem or usb etc etc.....
Null Modem Serial Cable 9-Pin Female to 9-Pin Female: Maplin Part# L71BT
USB to Serial 9-Pin Male Adaptor: Maplin Part# ZP43W
Ok so i go up to Maplin now, get the 9 pin female to usb cable install the drivers and away i go with the firmware via stblink and Bobs my aunties husband yeah???
You can check them out on their Website but they are also available from the likes of Peats & Fleabay:
i have a null modem cable that i use for cloning from box to box but i hear this is no longer an option, is this true??
So what additional cable do i need.
Thanx in advance.
The cable you have used for cloning in the past is the correct cable & will do for upgrading the firmware on your Replay Lite.
If your Laptop has not got a 9 Pin Male Serial port you will also need to get a USB to Serial 9 Pin Male Adapter.
The Adapter connects to a available USB port on your Laptop & the Null Modem cable connects between that & the Replaqy Lie Box.
You will need to install the software drivers supplied with the Adapter in order for your Laptop to recognize it. You will then need to set the port number on your laptop to either COM1 or COM2.
Here's how to set the port on your PC/Laptop.
Do the following.
START
Right Click "MY COMPUTER"
Choose "MANAGE"
In the resulting window, click on "DEVICE MANAGER"
In the right hand pane, click on the little plus sign beside "PORTS" in the right hand pane.
Right click on the USB Adapter (Should be something like "Prolific USB-to-Serial Comm. Port (COM#)
Choose "Properties"
Click on "PORT SETTINGS" TAB
Click on "ADVANCED"
Then you will see the COM Port Number Box. You should be able to change it there using the drop down box.
Try to set it to COM2
Restart Windows
Set STBLink to COM2 & try to connect.
If that fails try COM1 as the port number.
Cheers for the response, but i cant see "ports" in the right hand pane, there are many options there but "Ports" aint mentioned in any of them???
Also, its a female 15 pin connection i have on the back of my laptop.
The reason you don't see ports there now is because your Laptop does not have any serial ports onboard.
You will see "Ports" once you install the Adapter.
The 15 Pin female connector you referr to is for an external monitor it is NOT a Serial Port.
|
|
Mojo08
Newbie
|
23. April 2008 @ 09:21 |
Link to this message
|
Does it matter which usb port i use to connect the box??
I have a 9 pin serial cable / usb and the null modem cable, i have installed the drivers, connected the box to laptop using both cables but am unable to establish a connection.
Thanx.....
|
Senior Member
|
23. April 2008 @ 09:26 |
Link to this message
|
Originally posted by Mojo08:
i have a null modem cable that i use for cloning from box to box but i hear this is no longer an option, is this true??
Thanx in advance.
Just to clarify this for you Mojo08.
You can not clone once Firmware 910 is installed.
This very handy feature is disabled in this Beta version as the key roll capture was given priority. It is hoped to re-enable this feature in future firmware releases.
This message has been edited since posting. Last time this message was edited on 23. April 2008 @ 09:27
|
Senior Member
|
23. April 2008 @ 09:33 |
Link to this message
|
Originally posted by Mojo08:
Does it matter which usb port i use to connect the box??
I have a 9 pin serial cable / usb and the null modem cable, i have installed the drivers, connected the box to laptop using both cables but am unable to establish a connection.
Thanx.....
No it does not matter. The USB 2.0 adapter is backward compatible with USB Rev: 1.1
Once you have both the Laptop & STBlink COM Ports set to the same number (COM1 or COM2) & your cable is definitely a NULL Modem Serial cable then it will connect.
|
|
Mojo08
Newbie
|
23. April 2008 @ 09:36 |
Link to this message
|
Originally posted by gman496:
Originally posted by Mojo08:
Does it matter which usb port i use to connect the box??
I have a 9 pin serial cable / usb and the null modem cable, i have installed the drivers, connected the box to laptop using both cables but am unable to establish a connection.
Thanx.....
No it does not matter. The USB 2.0 adapter is backward compatible with USB Rev: 1.1
Once you have both the Laptop & STBlink COM Ports set to the same number (COM1 or COM2) & your cable is definitely a NULL Modem Serial cable then it will connect.
Have tried using both Comm 1 and Comm 2 but to no avail, its defo a null modem cable, its the cable i used for cloning from box to box before now.
Any other ideas??
|
Senior Member
|
23. April 2008 @ 09:42 |
Link to this message
|
Originally posted by Mojo08:
Originally posted by gman496:
Originally posted by Mojo08:
Does it matter which usb port i use to connect the box??
I have a 9 pin serial cable / usb and the null modem cable, i have installed the drivers, connected the box to laptop using both cables but am unable to establish a connection.
Thanx.....
No it does not matter. The USB 2.0 adapter is backward compatible with USB Rev: 1.1
Once you have both the Laptop & STBlink COM Ports set to the same number (COM1 or COM2) & your cable is definitely a NULL Modem Serial cable then it will connect.
Have tried using both Comm 1 and Comm 2 but to no avail, its defo a null modem cable, its the cable i used for cloning from box to box before now.
Any other ideas??
What software is currently on the box?
|
|
Mojo08
Newbie
|
23. April 2008 @ 09:43 |
Link to this message
|
|
Its STBlink 5.2 that i am using, is that correct??
|
|
jeffoo
Junior Member
|
23. April 2008 @ 09:45 |
Link to this message
|
|
Hi
just a quick question, i flashed my box last night, everything working great but was just wondering does anyone know hoe to get the channels alphabetically and numbered after each other ie;all channels beginning with A,B etc to come after each other on the menu but also numbered after each other. p.s anyone notice too that with the 752 version we had 2 ppv channels one which was sky box office but now only have one, which is constantly scrambled,
|
Senior Member
|
23. April 2008 @ 09:46 |
Link to this message
|
Originally posted by Mojo08:
Its STBlink 5.2 that i am using, is that correct??
Yes that is correct but what "Firmwae" version is currently installed on the Replay?
|
|
Mojo08
Newbie
|
23. April 2008 @ 09:47 |
Link to this message
|
Originally posted by gman496:
Originally posted by Mojo08:
Originally posted by gman496:
Originally posted by Mojo08:
Does it matter which usb port i use to connect the box??
I have a 9 pin serial cable / usb and the null modem cable, i have installed the drivers, connected the box to laptop using both cables but am unable to establish a connection.
Thanx.....
No it does not matter. The USB 2.0 adapter is backward compatible with USB Rev: 1.1
Once you have both the Laptop & STBlink COM Ports set to the same number (COM1 or COM2) & your cable is definitely a NULL Modem Serial cable then it will connect.
Have tried using both Comm 1 and Comm 2 but to no avail, its defo a null modem cable, its the cable i used for cloning from box to box before now.
Any other ideas??
What software is currently on the box?
Version 7.52
|
Senior Member
|
23. April 2008 @ 09:50 |
Link to this message
|
Originally posted by jeffoo:
Hi
just a quick question, i flashed my box last night, everything working great but was just wondering does anyone know hoe to get the channels alphabetically and numbered after each other ie;all channels beginning with A,B etc to come after each other on the menu but also numbered after each other. p.s anyone notice too that with the 752 version we had 2 ppv channels one which was sky box office but now only have one, which is constantly scrambled,
Menu
Channel Manager
TV Channels
You can use the "Yellow" button to sort them. You will see it on the matrix bottom of the screen
|
|
jeffoo
Junior Member
|
23. April 2008 @ 09:56 |
Link to this message
|
|
gman thank you so much, i am dumb i've being tryin for an hour i'm on this site couple mins and its sorted in 2 seconds, if i ever meet you i will defo buy you a beer or 2,
|
Senior Member
|
23. April 2008 @ 10:03 |
Link to this message
|
Originally posted by jeffoo:
gman thank you so much, i am dumb i've being tryin for an hour i'm on this site couple mins and its sorted in 2 seconds, if i ever meet you i will defo buy you a beer or 2,
No worries, we all had to be shown at some stage ;-)
That's what we are all here for......
|
Senior Member
|
23. April 2008 @ 10:07 |
Link to this message
|
Originally posted by Mojo08:
Originally posted by gman496:
Originally posted by Mojo08:
Originally posted by gman496:
Originally posted by Mojo08:
Does it matter which usb port i use to connect the box??
I have a 9 pin serial cable / usb and the null modem cable, i have installed the drivers, connected the box to laptop using both cables but am unable to establish a connection.
Thanx.....
No it does not matter. The USB 2.0 adapter is backward compatible with USB Rev: 1.1
Once you have both the Laptop & STBlink COM Ports set to the same number (COM1 or COM2) & your cable is definitely a NULL Modem Serial cable then it will connect.
Have tried using both Comm 1 and Comm 2 but to no avail, its defo a null modem cable, its the cable i used for cloning from box to box before now.
Any other ideas??
What software is currently on the box?
Version 7.52
Power down the box & disconnect from the PC
Close STBlink.
RE- connect the box & power up
Open STBlink
DO NOT do the COM Setup
Start the 910 update & see if it forces the connection.
This message has been edited since posting. Last time this message was edited on 23. April 2008 @ 10:09
|
|
Mojo08
Newbie
|
23. April 2008 @ 10:17 |
Link to this message
|
Originally posted by gman496:
Originally posted by Mojo08:
Originally posted by gman496:
Originally posted by Mojo08:
Originally posted by gman496:
Originally posted by Mojo08:
Does it matter which usb port i use to connect the box??
I have a 9 pin serial cable / usb and the null modem cable, i have installed the drivers, connected the box to laptop using both cables but am unable to establish a connection.
Thanx.....
No it does not matter. The USB 2.0 adapter is backward compatible with USB Rev: 1.1
Once you have both the Laptop & STBlink COM Ports set to the same number (COM1 or COM2) & your cable is definitely a NULL Modem Serial cable then it will connect.
Have tried using both Comm 1 and Comm 2 but to no avail, its defo a null modem cable, its the cable i used for cloning from box to box before now.
Any other ideas??
What software is currently on the box?
Version 7.52
Power down the box & disconnect from the PC
Close STBlink.
RE- connect the box & power up
Open STBlink
DO NOT do the COM Setup
Start the 910 update & see if it forces the connection.
Still no joy, it just said "the system cannot find the file specified" and then "COM Port open error".
|
|
thebyrnie
Newbie
|
23. April 2008 @ 10:20 |
Link to this message
|
hi guys i know this is a bit off subject i have been googleing and trying it out and have no joy so i thought i'd ask the experts i am trying to connect my replay lite to a vcr to record the match tonight as i have to work :-(
Is this possible and how would you recommend i do it the vcr has only one scart socket can't find manual to find out if it is bi decrectional also does the replay route the channel it is on through the rf output
|
|
Advertisement
|
|
|
Senior Member
|
23. April 2008 @ 10:21 |
Link to this message
|
Originally posted by Mojo08:
Originally posted by gman496:
Originally posted by Mojo08:
Originally posted by gman496:
Originally posted by Mojo08:
Originally posted by gman496:
Originally posted by Mojo08:
Does it matter which usb port i use to connect the box??
I have a 9 pin serial cable / usb and the null modem cable, i have installed the drivers, connected the box to laptop using both cables but am unable to establish a connection.
Thanx.....
No it does not matter. The USB 2.0 adapter is backward compatible with USB Rev: 1.1
Once you have both the Laptop & STBlink COM Ports set to the same number (COM1 or COM2) & your cable is definitely a NULL Modem Serial cable then it will connect.
Have tried using both Comm 1 and Comm 2 but to no avail, its defo a null modem cable, its the cable i used for cloning from box to box before now.
Any other ideas??
What software is currently on the box?
Version 7.52
Power down the box & disconnect from the PC
Close STBlink.
RE- connect the box & power up
Open STBlink
DO NOT do the COM Setup
Start the 910 update & see if it forces the connection.
Still no joy, it just said "the system cannot find the file specified" and then "COM Port open error".
Try now to set-up the COM.
If that fails you should try donloading firmware 742a & flash the box with that first & then flash it again with 910.
|
