Originally posted by Rick1423:

---

Please help...I have the silver PSP and have followed all of the steps many times and still have no luck...when i use just the modified battery i get only the black screen and only the green power light is lit no other lights and no action after that...also when I use the charger to power up and go to games and then pandora it says "The game could not be started. (8002014C)" Any help at at would be greatly appreciated b/c i am stuck and don't know what to do...Thanks!

---

Originally posted by erenix:

---

"started"...you dont boot pandora. Do you have a slim? if so try pressing 0 or X when in the black screen. Again..is this hard modded or soft? Did you use windows xp for soft? give us some specific info or we can't help you.

---

Quote:

---

f the green light on psp turns on automatically it was made correctly.

---

Quote:

---

LOL! I love what you chanjed my e-mail to.

---

Originally posted by erenix:

---

To make sure you made the battery right {without putting a ms} put the batt in, if the green light on psp turns on automatically it was made correctly. If thats the case the ms was made incorrectly. Make sure youre not using vista. Follow the Newbi installer step by step. Make sure your not using a 4gb ms, (from what ive heard).

---

Originally posted by erenix:

---

Dang I'm double posting but I am late for class. Hey I forgot before you try that make sure you "logically formatted" your memory stick. That is number one problem for a lot of ppl.

---

Originally posted by erenix:

---

logically format it, by formatting it through your computer. 1gb mem stick is fine. Don't use 32mb or 4gb.

---

Originally posted by MistaBeef:

---

Originally posted by hongpan:

---

ok. I notice I had a error message

it's like this :
target drive is 3
check partation sector
cannot open device \\.\physicaldrive3
can't read partation sector

anyone knows what it is about?

---

I get that same error message. I am getting EXTREMEMLY frustrated here. Damn these new SLIMS with the pre-loaded 3.71 firmware!!!!!!

---

Originally posted by Shokz:

---

Yes, you can make your own, it does involve taking your battery appart though:

(Thanks to Ben Heck for writing the guide and 07anto07 for showing it me)


GUIDE TO: Making Pandora's Battery (*new method*)

--------------------------------------------------------------------------------
1st things 1st, lets knock some of those questions out of the way!!!

(Q)Whats Pandora's battery?
(A)If your on this site and dont know what pandora's battery is, then look it up and come back!

(Q)There are alot of Pandora Guides.....What makes your different?
(A)With most of the guides, you requier a homebrew enabled psp. But with my guide, i will show you how to softmod the battery so there is no need for a custom firmwared psp or a psp with a 1.50 kernel!

(Q)Whats Softmod?
(A)Softmodding is a safe and relatively easy way to mod (modify something)

(Q)I dont know what shortcuts are (like OFW and CFW, etc)
(A)For the people that dont know, i will include a "Key" at the bottom of this tutorial. Im trying to make this as "Noob Friendly" as possible (so please if you dont understand something i will try my best to re-explain it)

Next up is the way this tutorial is organized. Here is how it will look:
1)Questions and Answers
2)Materials
3)Process #1 (creating a magic memory stick)
4)Process #2 (softmodding the battery)
5)Testing your battery
6)Running pandora's battery
7)tips and tricks
8)Final question
9)Key
10)Links

so with that said, lets continue with this guide......

(NOTE: materials are labled by: 1)Name and then 2)quantity)

Materials:
----------
A psp running ANY firmware (1)
A compute with an internet connection (1)
A mini USB cable or memory card reader (1)
A knife or exacto knife (1)
A battery (just as long as it is NOT a new battery because they are "pandora proof") (1)
A needle/safety pin (1-2)

Process #1 (Creating A Magic Memory Stick)
-------------------------------------------
1)Turn on the psp
2)Format the memory stick
3)Go into USB mode
4)Next, go here: -TOTALNewbi-easyInstaller-PSP-Tools-Utilities-(on-PC)-
5)At the bottom, select download (the dowload is 135MB so be patient)
6)Extract the application to your desktop
7)Run "Start.exe"
8)Follow the instructions until you get into the installation screen
9)When there, you can select to install the universal unbricker (do this one!!!)
10)After it is done, your going to need to get 2 files. 1)registry 2)kd (i have a download link at the bottom for people without this)
11)Put both (kd & registry) on the root of your memery stick
12)Disconnect your psp and turn it off

Process #2 (Softmodding the battery)
-------------------------------------
1)Take your knife/exact knife and CAREFULLY open your battery
2)once done, look for the connecter labled (ICO4 or CO4) (depending on your battery)
3)Next take your needle/safety pin and CAREFULLY remove the 5th pin (the pins start from the bottom left and up. So pin 5 should be the bottom one on the right.....depending on how you hold your battery.)
4)Put you battery back together (and if you want, glue it back on)

Now from here you are pretty much done! All you really need to do is test your battery.

Testing your battery:
---------------------

(to test battery, insert the battery with no memory stick inserted. the power should automatically come on. If so, you did it!!! if not, then you cut the wrong connecter but you might have 1 more chance to get it right!)

Now all you have to do is run pandora's battery!!!

Running pandora's battery:
--------------------------

(to do this, start the psp with both the ceated memory card and the softmodded battery. You may or may not see anything. But the MS LED and the wifi LED should glow for a second. If it does, just press X and let that run for about 5 minutes. if it doesnt, try re-creating the memory stick)
OK, your psp should turn itself off in the end. all you have to do is remove the battery and the memory stick. and then plug in the charger. Next, turn on the psp and you should have 3.71 M33 or 3.71 M33-2!!!!!

Tips and tricks:
---------------
1)Run the v3 universal unbricker when your done so you can see the text (on slim psp's or fat)
2)Buy a new battery (if your cheap, see the 1st question on "Final Questions"
3)Remember NOT ALL homebrew is comaptible with the psp slim!!

Final Questions:
---------------
(Q)Can i ever dual boot my XMB and my battery
(A)Yes! you can do this only one way. you need to buy a switch and solder on the + and - connecter to the batter and to the switch. This will allow you to choose when you want to boot into pandora's battery or into your XMB (see links)

(Q)When i insert my softmodded battery, the psp turns on but i cant see anything
(A)Thast because your probably using a psp slim which in that case, just press X and then install the V3 unbricker

(Q)The light comes on but my MS LED and my wofi LED doesnt do anything
(A)This is a common problem when you dont follow the instruction EXACTLY, you have to re-create the magic memory stick

(Q)Im curious, how does this work?
(A)Well, pin 5 is the pin that makes the battery load the EEPROM but since its cut, it runs the next thing which is the memory stick.

(Q)Did you create this?
(A)No, i did not. Ben Heck did and all details can be found on his site (see links)

Key:
----
OFW=Official Firmware
CFW=Custom Firmware
LED=Light Emiting Diod
Jigkick=Auto-Start

Links:
------
Ben Heck's web site: The Official Site of Benjamin J Heckendorn

Ben Heck's work on this project: benheck.com Forums :: View topic - TUTORIAL: Make a Pandora's Battery without a homebrew PSP!

---

Originally posted by Cloud89:

---

Originally posted by Shokz:

---

Yes, you can make your own, it does involve taking your battery appart though:

(Thanks to Ben Heck for writing the guide and 07anto07 for showing it me)


GUIDE TO: Making Pandora's Battery (*new method*)

--------------------------------------------------------------------------------
1st things 1st, lets knock some of those questions out of the way!!!

(Q)Whats Pandora's battery?
(A)If your on this site and dont know what pandora's battery is, then look it up and come back!

(Q)There are alot of Pandora Guides.....What makes your different?
(A)With most of the guides, you requier a homebrew enabled psp. But with my guide, i will show you how to softmod the battery so there is no need for a custom firmwared psp or a psp with a 1.50 kernel!

(Q)Whats Softmod?
(A)Softmodding is a safe and relatively easy way to mod (modify something)

(Q)I dont know what shortcuts are (like OFW and CFW, etc)
(A)For the people that dont know, i will include a "Key" at the bottom of this tutorial. Im trying to make this as "Noob Friendly" as possible (so please if you dont understand something i will try my best to re-explain it)

Next up is the way this tutorial is organized. Here is how it will look:
1)Questions and Answers
2)Materials
3)Process #1 (creating a magic memory stick)
4)Process #2 (softmodding the battery)
5)Testing your battery
6)Running pandora's battery
7)tips and tricks
8)Final question
9)Key
10)Links

so with that said, lets continue with this guide......

(NOTE: materials are labled by: 1)Name and then 2)quantity)

Materials:
----------
A psp running ANY firmware (1)
A compute with an internet connection (1)
A mini USB cable or memory card reader (1)
A knife or exacto knife (1)
A battery (just as long as it is NOT a new battery because they are "pandora proof") (1)
A needle/safety pin (1-2)

Process #1 (Creating A Magic Memory Stick)
-------------------------------------------
1)Turn on the psp
2)Format the memory stick
3)Go into USB mode
4)Next, go here: -TOTALNewbi-easyInstaller-PSP-Tools-Utilities-(on-PC)-
5)At the bottom, select download (the dowload is 135MB so be patient)
6)Extract the application to your desktop
7)Run "Start.exe"
8)Follow the instructions until you get into the installation screen
9)When there, you can select to install the universal unbricker (do this one!!!)
10)After it is done, your going to need to get 2 files. 1)registry 2)kd (i have a download link at the bottom for people without this)
11)Put both (kd & registry) on the root of your memery stick
12)Disconnect your psp and turn it off

Process #2 (Softmodding the battery)
-------------------------------------
1)Take your knife/exact knife and CAREFULLY open your battery
2)once done, look for the connecter labled (ICO4 or CO4) (depending on your battery)
3)Next take your needle/safety pin and CAREFULLY remove the 5th pin (the pins start from the bottom left and up. So pin 5 should be the bottom one on the right.....depending on how you hold your battery.)
4)Put you battery back together (and if you want, glue it back on)

Now from here you are pretty much done! All you really need to do is test your battery.

Testing your battery:
---------------------

(to test battery, insert the battery with no memory stick inserted. the power should automatically come on. If so, you did it!!! if not, then you cut the wrong connecter but you might have 1 more chance to get it right!)

Now all you have to do is run pandora's battery!!!

Running pandora's battery:
--------------------------

(to do this, start the psp with both the ceated memory card and the softmodded battery. You may or may not see anything. But the MS LED and the wifi LED should glow for a second. If it does, just press X and let that run for about 5 minutes. if it doesnt, try re-creating the memory stick)
OK, your psp should turn itself off in the end. all you have to do is remove the battery and the memory stick. and then plug in the charger. Next, turn on the psp and you should have 3.71 M33 or 3.71 M33-2!!!!!

Tips and tricks:
---------------
1)Run the v3 universal unbricker when your done so you can see the text (on slim psp's or fat)
2)Buy a new battery (if your cheap, see the 1st question on "Final Questions"
3)Remember NOT ALL homebrew is comaptible with the psp slim!!

Final Questions:
---------------
(Q)Can i ever dual boot my XMB and my battery
(A)Yes! you can do this only one way. you need to buy a switch and solder on the + and - connecter to the batter and to the switch. This will allow you to choose when you want to boot into pandora's battery or into your XMB (see links)

(Q)When i insert my softmodded battery, the psp turns on but i cant see anything
(A)Thast because your probably using a psp slim which in that case, just press X and then install the V3 unbricker

(Q)The light comes on but my MS LED and my wofi LED doesnt do anything
(A)This is a common problem when you dont follow the instruction EXACTLY, you have to re-create the magic memory stick

(Q)Im curious, how does this work?
(A)Well, pin 5 is the pin that makes the battery load the EEPROM but since its cut, it runs the next thing which is the memory stick.

(Q)Did you create this?
(A)No, i did not. Ben Heck did and all details can be found on his site (see links)

Key:
----
OFW=Official Firmware
CFW=Custom Firmware
LED=Light Emiting Diod
Jigkick=Auto-Start

Links:
------
Ben Heck's web site: The Official Site of Benjamin J Heckendorn

Ben Heck's work on this project: benheck.com Forums :: View topic - TUTORIAL: Make a Pandora's Battery without a homebrew PSP!

---

---