|
[GUIDE]:UPMS-V4 (Sapphire) Installer **DO NOT USE WITH CFW 4.01M33 AND ABOVE!!**
|
|
|
miniray
Newbie
|
22. December 2007 @ 21:59 |
Link to this message
|
Originally posted by dEEz_nUtz:
Originally posted by miniray:
anyone try to downgrade a fat psp with offical fireware 3.71,3.73 or 3.8 ?
Yes, yes, and no..(havent tried it on 3.80 yet)
UPMS works good for 3.71 and 3.73-
thanks for replying i am going to try it for my cousin thanks alot
|
|
Advertisement
|
|
|
|
Senior Member
|
24. December 2007 @ 18:43 |
Link to this message
|
|
whats weird is that for my psp slim with this tut. ... It only works if i use my phat charger for my phat jigkick battery UPMS.. deeznuts, you got a comment on your page.
VIDEO OF MY 2 PSP's ON YOUtube >;] http://youtube.com/watch?v=ZvNvozQ7Gmo
· uNDERGROUND · HIPHOPHEAD · MARVEL VS. CAPCOM 2 · Z31 · DRIFT FAN · TURNTABLEZ · PSPMODDEr
(+[SOLD]%)(+[SOLD]%)(+[SOLD]%)(+[SOLD]%)(+[SOLD]%)(+[SOLD]%)(+[SOLD]%) >(+[M33/4]%) · (+[M33/4]%)< |
|
adyau
Suspended due to non-functional email address
|
25. December 2007 @ 03:15 |
Link to this message
|
Originally posted by adyau:
thanks 2 brozeghost for all ur help mate the other night geting psp goin again
has any 1 else had the issue about after a full brick with flash 1 danage got it goin again but wont play games either iso or umd it jus says this game cannot be started the region code is not correct thanks ,ady
still no luck with psp reading games still says about the region code any ideas pls ,thanks ady
1st psp ta082 2.71-1.50-3.03oethis is my 8yr olds
2ndpsp 2.00 .2.71 -1.50-2.00.1.50-303oe,340oe,mine
|
Junior Member
|
25. December 2007 @ 13:41 |
Link to this message
|
Originally posted by adyau:
Originally posted by adyau:
thanks 2 brozeghost for all ur help mate the other night geting psp goin again
has any 1 else had the issue about after a full brick with flash 1 danage got it goin again but wont play games either iso or umd it jus says this game cannot be started the region code is not correct thanks ,ady
still no luck with psp reading games still says about the region code any ideas pls ,thanks ady
Hi Ady, it's def to do with your IDStorage Keys being the wrong keys for that PSP. Hopefully in the near future there will be an IDStorage regenerator.
Gh0st.
U.P.M.S & Ultimate Loader Developer
Consoles Owned:
Xbox (mod) | Xbox360 | WII | 4xPSP's (mod)
|
|
red0110
Newbie
|
25. December 2007 @ 15:32 |
Link to this message
|
|
i have a brand new psp slim 3.71
i'm trying to upgrade to 3.71 m33
i did everything on the tut, but it wont work with my slim
all i get is the green power light, nothing else
can some one please help me
|
|
adyau
Suspended due to non-functional email address
|
26. December 2007 @ 08:05 |
Link to this message
|
Originally posted by BRONZ3gst:
Originally posted by adyau:
Originally posted by adyau:
thanks 2 brozeghost for all ur help mate the other night geting psp goin again
has any 1 else had the issue about after a full brick with flash 1 danage got it goin again but wont play games either iso or umd it jus says this game cannot be started the region code is not correct thanks ,ady
still no luck with psp reading games still says about the region code any ideas pls ,thanks ady
Hi Ady, it's def to do with your IDStorage Keys being the wrong keys for that PSP. Hopefully in the near future there will be an IDStorage regenerator.
Gh0st.
thanks ghost will keep a eye out 4 it so i can get playin some more psp thanks ,ady
1st psp ta082 2.71-1.50-3.03oethis is my 8yr olds
2ndpsp 2.00 .2.71 -1.50-2.00.1.50-303oe,340oe,mine
|
|
peanutmd
Newbie
|
28. December 2007 @ 17:09 |
Link to this message
|
|
hi, i have a fat 3.52-m22 cfw, and want to convert my slim 3.71, however when i ran the UPMS installer step # 3 to install the firmware, i kept getting error said that there were NO 150 pbp found and it exited on me. i tried many times to rename the eboots but still have the same problem can any one can help me?
|
Member
|
28. December 2007 @ 23:33 |
Link to this message
|
Originally posted by peanutmd:
hi, i have a fat 3.52-m22 cfw, and want to convert my slim 3.71, however when i ran the UPMS installer step # 3 to install the firmware, i kept getting error said that there were NO 150 pbp found and it exited on me. i tried many times to rename the eboots but still have the same problem can any one can help me?
Try re-downloading your PBP files from Here
Then make sure you have placed them directly in the root of your MS. Meaning if X:\ is your PSP under windows then Place these files directly in X:\ Do not place them in any folders.
Also make sure you name them exactly 150.PBP and 371.PBP with the extensions in caps.
Last but not least if those fail run Blackspeed on your MS to see if it's fake. If so this could be the problem.
Just trying to throw out all ideas as I don't make it here much anymore.
|
|
alunb
Junior Member
|
29. December 2007 @ 07:03 |
Link to this message
|
Originally posted by red0110:
i have a brand new psp slim 3.71
i'm trying to upgrade to 3.71 m33
i did everything on the tut, but it wont work with my slim
all i get is the green power light, nothing else
can some one please help me
Hi had the same problem, when you load it up first time i had to use the hold button as described in an earlier post on this thread and then it worked fine.
try this is does work i've done two 3.71 slims (only used the hold on first attempt second time it loaded straight up, weird......
Al
|
Member
|
29. December 2007 @ 13:35 |
Link to this message
|
|
That is how it is supposed to act. If DCV3 is not the active folder you must use the hold button to activate it before using ULoader.
This is the correct way to boot a Slim when using UPMS.
I have tried to make it as clear as possible. Please let me know if there is something that is unclear.
If DCv3 is active:
With PSP off and battery removed,
1) Hold Left Trigger
2) Insert your Pandora battery, Ultimate Loader will boot.
NOTE: If you have the power switch in the Hold position (down) and insert Pandora's battery while holding Left Trigger it will boot directly to DCv3, but don't forget to put hold switch back to normal otherwise your button presses will not work.
If you have either Hellcat, Joker, or are unsure which folder is active:
With PSP off and battery removed,
1) Push power switch down to Hold.
2) Hold Left trigger
3) Insert Pandora's battery, The slim will boot then turn off.
4) Remove Pandora's battery
5) Put power switch back to normal (turn hold off)
6) Hold left trigger
7) Insert Pandora's battery, this will now display the Ultimate Loader menu. From here you can launch DCv3.
MAKE SURE YOU BACK UP YOUR NAND.
Hope this helps you folks.
|
Senior Member
|
31. December 2007 @ 00:55 |
Link to this message
|
Originally posted by miniray:
Originally posted by dEEz_nUtz:
Originally posted by miniray:
anyone try to downgrade a fat psp with offical fireware 3.71,3.73 or 3.8 ?
Yes, yes, and no..(havent tried it on 3.80 yet)
UPMS works good for 3.71 and 3.73-
thanks for replying i am going to try it for my cousin thanks alot
Confirmed that UPMS works to downgrade 3.80 on fat psp, as well as slim psp's with 3.80 fw...I used it on a slim the other day that I had previously "enhanced" for someone, and they managed to use the Network Update function and it updated to official 3.80 from 3.71M33-2...(whoops!)
A word of warning to those with slim psp's running custom firmware-DO NOT USE THE NETWORK UPDATE FUNCTION IN THE XMB-It will update your psp to official firmware...
|
|
kris2pe
Member
|
1. January 2008 @ 02:27 |
Link to this message
|
|
how do I make this work on a slim!
I tried using it w/ the Phat and the menu shows up!
But it doesn't work w/ the slim!
Even if I hold the L button on it!
Am I missing a step or something?
I already have the pandora phat batteries!
Any ideas?
|
|
kewljohn
Newbie
|
1. January 2008 @ 06:27 |
Link to this message
|
Is there any other way i can safely downgrade my 3.72 firmware by sony which i upgraded from 3.71 m33-3 without using the pandora battery and memory stick? thxn
|
Senior Member
|
1. January 2008 @ 21:48 |
Link to this message
|
Originally posted by kris2pe:
how do I make this work on a slim!
I tried using it w/ the Phat and the menu shows up!
But it doesn't work w/ the slim!
Even if I hold the L button on it!
Am I missing a step or something?
I already have the pandora phat batteries!
Any ideas?
try popping the battery and memory stick into your fat psp and setting the active folder to the DCv3 option..otherwise try following these steps as directed by ovrfiendx a few posts up.
If you have either Hellcat, Joker, or are unsure which folder is active:
With PSP off and battery removed,
1) Push power switch down to Hold.
2) Hold Left trigger
3) Insert Pandora's battery, The slim will boot then turn off.
4) Remove Pandora's battery
5) Put power switch back to normal (turn hold off)
6) Hold left trigger
7) Insert Pandora's battery, this will now display the Ultimate Loader menu. From here you can launch DCv3
@kewljohn-only way to downgrade from 3.72 is pandora battery and memory stick...There are no game expolits you can use at this time.
|
|
xxpinkxx
Suspended due to non-functional email address
|
4. January 2008 @ 06:27 |
Link to this message
|
Hi,
I've recently just bought a psp slim. I tried installing UPMS into my memory stix. And i realised later on that I missed out on this 2 steps.
4>Copy the 1.50 update to the root of your memory stick-named as 150.PBP
5>Copy the 3.71 update to the root of your memory stick-named as 371.PBP
and then I continued onto step 6 and step 7.
At step 7 we're told to follow by order the following steps.
Step#1-Select the 'sleep fix Multi-IPL' option
Step#2-Backup your eeprom, then create Your battery
Step#3-Install UPMS with utilities (slowest)-It may take a while-Please be patient. (This will install the extras from step #4)
Step#4-Skip this step if you used the 'full version' installer and selected 'Install UPMS w/ utilities from step
I did step 1 and step 2 and everything went fine. Its only till step 3 when I am unable to install UPMS (they said that i will need the 1.50 and 3.71 update)then i realise i missed out that step.
However, now I cannot even turn on my psp. The green light appears when I turn power on but then the screen remains black. It is because I converted my battery to pandora but then my memory stix is still not the magic stix? pls advise. Thanks
Cheers,
xxpinkxx
|
|
Feenix888
Member
|
4. January 2008 @ 06:35 |
Link to this message
|
|
@xxxpinkXXX De-nutz will provide a better solution than i could, but i can tell you that you are right. Your MMS is not created or is created wrongly. It is something to do with the mutli ipl, although i am not exactly sure why.
My battery if used with another card does exactly the same, not a problem for me as i have a spare. If you have got another battery, re-do the MS with uPMS carrying out all the steps but missing step#2 (Creating Pandora as you already have one).
PsP#1 : 2.01>3.71M33-4>3.80 M33-5
PsP#2 (Slim) : 3.80>3.90M33-2 All hail the UPMS Stck
If you need a UPMS Stick go here and then go here :-) *As recommended by January39 |
|
xxpinkxx
Suspended due to non-functional email address
|
4. January 2008 @ 09:07 |
Link to this message
|
|
Feenix888, thanx for your advise =)
|
Senior Member
|
4. January 2008 @ 11:36 |
Link to this message
|
Originally posted by xxpinkxx:
Hi,
I've recently just bought a psp slim. I tried installing UPMS into my memory stix. And i realised later on that I missed out on this 2 steps.
4>Copy the 1.50 update to the root of your memory stick-named as 150.PBP
5>Copy the 3.71 update to the root of your memory stick-named as 371.PBP
and then I continued onto step 6 and step 7.
At step 7 we're told to follow by order the following steps.
Step#1-Select the 'sleep fix Multi-IPL' option
Step#2-Backup your eeprom, then create Your battery
Step#3-Install UPMS with utilities (slowest)-It may take a while-Please be patient. (This will install the extras from step #4)
Step#4-Skip this step if you used the 'full version' installer and selected 'Install UPMS w/ utilities from step
I did step 1 and step 2 and everything went fine. Its only till step 3 when I am unable to install UPMS (they said that i will need the 1.50 and 3.71 update)then i realise i missed out that step.
However, now I cannot even turn on my psp. The green light appears when I turn power on but then the screen remains black. It is because I converted my battery to pandora but then my memory stix is still not the magic stix? pls advise. Thanks
Cheers,
xxpinkxx
I would recommend starting from the beginning-It sounds like your files are not in order..Just make sure you have those eboots (150.PBP, and 371.PBP) in the root of your memory stick prior to running the UPMS installer...Also, you can select 'Boosters Multi-IPL' from step #1 in the installer if you so choose.
As far as your psp not turning on-you can remove the battery that you converted, and just plug in the charger so you can power up your psp to run the installer again...
Hope that helps...
|
Member
|
4. January 2008 @ 14:14 |
Link to this message
|
|
Yup do as dEEz has stated use your charger to boot. The problem is the firmware files are not on the MS. So when the PSP looks there because the IPL directed it to look for flash0 on the MS (this is how Pandora works)it can't find them and so fourth can not bootup.
|
Junior Member
|
4. January 2008 @ 20:26 |
Link to this message
|
|
damn good guide instructions. i was having so many issues getting my slim psp to CFW. much appreciated.
|
|
xxpinkxx
Suspended due to non-functional email address
|
5. January 2008 @ 03:18 |
Link to this message
|
|
Hey thanx guys. But will I be able to use a 4gb MS or is it that it is required to use onlt 256mb-2gb MS?
|
Senior Member
2 product reviews
|
5. January 2008 @ 03:25 |
Link to this message
|
|
Problem is that only a few 4GB work, its recommeneded to go for a 256MB to 1GB, but try it, not guaranteed to work.
PSP (+[__]%): 2.80 < 1.50 > 3.40OE-A > 3.71M33-4 > 3.80m33-5 > 3.90m33-3 > 4.01m33-2 + 8gb MSPD
PS3 HD 60GB: 1.33 > 1.90 > 2.01 > 2.17 - NO OS
Nintendo DS [+[__]%]: EZ Flash 5 Plus + 1GB MicroSD + EZFlash 3in1
Nintendo Wii: 3.2U + 1GB SD Card + WiiKey 1.9s
|
Member
|
5. January 2008 @ 11:32 |
Link to this message
|
Originally posted by xxpinkxx:
Hey thanx guys. But will I be able to use a 4gb MS or is it that it is required to use onlt 256mb-2gb MS?
4gig stick's work fine bro as long as it's genuine and not fake. All fake sticks may cause problems no matter the size. There are two progs on our official forums that help identify and fix fake sticks to work with any form of Pandora. Check my sig for links.
|
Junior Member
|
5. January 2008 @ 21:55 |
Link to this message
|
|
DUDE THX!!!!! this is the best U.P.M.S download and setup guide...freakin awesome lol
|
|
Advertisement
|
|
|
Junior Member
|
5. January 2008 @ 22:47 |
Link to this message
|
Originally posted by nome007:
HI i am new
7>Run the UPMS program from the XMB as you would an ISO or cso. (make sure your NO-UMD is set correctly in recovery mode
i could not understand this setup .please briefly define how can i do that.
thank
hold the R trigger when u turn on ur psp and go to configuration and go down to UMd mode and press until it says sony np9660 -NO UMD-
|
