|
GUIDE: Universal Unbricker V3 Using FAT 1.50 or FAT/SLIM custom firmware PSP.
|
|
Member
|
2. February 2008 @ 06:02 |
Link to this message
|
Originally posted by Dorkust:
I have a PSP 3.80M33-5 and I want to fix another bricked PSP. Following the instructions:
Quote:
PANDORA GUIDE:
Go to Game Menu Memory Stick and run OS Pandora Battery Tool. Press X at warning screen to get to Main Menu.
Select "backup battery eeprom to ms0:/eeprom.bin"
After the eeprom is backed up go to "convert to service mode"
Go to Quiet Now after the Battery has been converted and it will exit to XMB.
Turn off the PSP and take out the Battery then re-insert the Battery back in the PSP and the Universal Unbricker Menu should come up. press X to install 3.71 M33 to the PSP.
So, do I turn off my (3.80M33-5) PSP and put the battery and mem-stick in the bricked PSP and continue guide?
I just dont' want to start the unbricking on my (3.80M33-5) by accident.
Thanks in advance. I hope this makes sense. Much appreciated for the guide too. Nice work!
yes once you have made the Magic Stick+Pandora Battery take out the Battery then re-insert the Battery back in the PSP and the Universal Unbricker Menu should come up. press X to install 3.71 M33 to the PSP
I love psobb but i need a credit card # to get back on :(
|
|
Advertisement
|
|
|
|
|
jona_evon
Newbie
|
3. February 2008 @ 09:00 |
Link to this message
|
Originally posted by m2b:
larrylje,
I found the source of the problem
Quote:
Originally posted by 07anto07:
Originally posted by crisis23: what im thinking is that maybe while creating the magic memory stick i might have made an error but ive done it 3 times now following the directions perfectly and still nothing but maybe this is the problem :
The files will now be installed to the Memory Stick.
After it has finished writing the files you will get an image similar to below. Just type Y and ENTER to finish the instillation of files to the Magic memory Stick.
http://i63.photobucket.com/albums/h141/larrylje/writeboot.jpg
during this step i dont get that message in the image that asks me to push yes to continue i get another that says the people who created the program and then it closes after i push a button
that's strange that didn't happen to me i got the image and press y and it didn't come up
Quote:the people who created the program and then it closes after i push a button
The reason the credits come up is because when you are asked to format you typed y then took the ms out and exited usb before you were prompted to do so the reason i know this is because i done the same 3 times then on 4th try i waited for the installer to prompt me to take it out and it worked fine hope this helps anyone else with the same problem.
Even when I waited for the prompt to remove the MS, the same thing happens to me, but instead of cutting to the credits it says 1 file copied about 10 times real fast then the credits roll.
The "PSP MS IPL Installer" never shows up, which is obviously the issue because like you said, the IPLs are necessary.
Hi Guys, i think i have finally nail this. I was stuck with this problem and guess what, after some serious thinking, i expanded the installation files at the c:\ root directory of my computer and run it from there and it work. Some dos files it use doesn't work well when the pathname is too long. That also explain why some of us are stuck and some of us are not.
This is where i put initially,
C:\Documents and Settings\Compaq_Administrator\My Documents\!System Download\Psp\Firmware\Univer_File\EasyInstaller\Start.exe
This is where i put to make it work,
C:\Univer_File\EasyInstaller\Start.exe
Hope this help.
|
|
panas
Newbie
|
3. February 2008 @ 09:41 |
Link to this message
|
when i press the applications to start it says "The game could not be started.(8002014C)" and other codes...i will send it to sony maybe...PLS HELP ME
|
|
garvord
Newbie
|
3. February 2008 @ 09:49 |
Link to this message
|
|
Have you put a UMD in your PSP? OR Have you set your settings to no UMD required?
Mr G.
2.71 > 1.5 > >>>>zoom>>>>> > 3.80M33
Wii D2C
|
|
panas
Newbie
|
3. February 2008 @ 10:54 |
Link to this message
|
|
i dont put a UMD...where can i see that my settings are set to no UMD required or not?
|
|
garvord
Newbie
|
3. February 2008 @ 10:59 |
Link to this message
|
|
start your PSP up and hold L1 during power up, this will take you into settings ....
Mr G.
2.71 > 1.5 > >>>>zoom>>>>> > 3.80M33
Wii D2C
|
|
panas
Newbie
|
3. February 2008 @ 11:04 |
Link to this message
|
|
it doesn't take me to settings......
|
AfterDawn Addict
|
3. February 2008 @ 11:25 |
Link to this message
|
Originally posted by panas:
it doesn't take me to settings......
hold the R button and power on the psp the menu will come up.
250gb ps3 non modded and 60gb launch model 3.55cfw |
AfterDawn Addict
|
3. February 2008 @ 11:31 |
Link to this message
|
Originally posted by panas:
i dont put a UMD...where can i see that my settings are set to no UMD required or not?
As stated above R-Trigger brings you to recovery menu.
But if you don't have custom firmware installed yet to the PSP this will not work.
What are you trying to run when the Game Could Not Be started error comes up?
|
|
panas
Newbie
|
3. February 2008 @ 11:37 |
Link to this message
|
|
a game...
|
AfterDawn Addict
|
3. February 2008 @ 11:49 |
Link to this message
|
Originally posted by panas:
a game...
Why are you posting this problem in this thread?
This is for installing custom firmware to the PSP using a Universal Unbricker.
Do you even have custom firmware on your PSP?
|
AfterDawn Addict
|
3. February 2008 @ 11:51 |
Link to this message
|
Originally posted by panas:
a game...
start ur own thread and we'll help
250gb ps3 non modded and 60gb launch model 3.55cfw
|
|
panas
Newbie
|
3. February 2008 @ 11:54 |
Link to this message
|
|
oh i forgot it...i press x on the pandora's applications and it says "This game cannot be started.(says a code here)".
|
AfterDawn Addict
|
3. February 2008 @ 11:59 |
Link to this message
|
Originally posted by panas:
oh i forgot it...i press x on the pandora's applications and it says "This game cannot be started.(says a code here)".
In order for this guide to work you need to run the Pandora Application on a custom firmware PSP.
If you only have access to an Official firmware PSP then you will need to use a Hardmodded Battery or buy a Datel Tool Battery. Use this guide HERE if you only have an Official Firmware PSP.
|
|
panas
Newbie
|
3. February 2008 @ 12:05 |
Link to this message
|
|
i tried that guide...it didn't work...i have fat psp with 3.90 v...i updated it yesterday
|
AfterDawn Addict
|
3. February 2008 @ 12:15 |
Link to this message
|
Originally posted by panas:
i tried that guide...it didn't work...i have fat psp with 3.90 v...i updated it yesterday
You can not run the Pandora Application on a Official Firmware PSP. So your only choice is using the other guide I provided and Hardmod the Battery to a Pandora battery or buy a Datel Tool Battery.
The only way you can use this guide and run the Pandora application is if you have a custom firmware PSP which your PSP does not have custom firmware on it. That is why your getting the "Game could not be started" error.
|
|
panas
Newbie
|
3. February 2008 @ 12:33 |
Link to this message
|
|
i will send it to the shop i've bought it to repair it
|
AfterDawn Addict
|
3. February 2008 @ 12:40 |
Link to this message
|
Originally posted by panas:
i will send it to the shop i've bought it to repair it
It doesn't need to be repaired. There is nothing the shop can do for you unless they themselves put custom firmware onto your PSP for you.
The issue is Official firmware can not run unsigned code. The Pandora Battery Application is not signed by Sony so it can not be run on Official firmware PSP.
The only way you can fix this issue is by installing custom firmware to the PSP. In order for you to do this you will need another PSP that has custom firmware or use your Official firmware PSP and a Hardmodded Battery or Datel Tool Battery.
|
|
panas
Newbie
|
3. February 2008 @ 12:48 |
Link to this message
|
|
thanks for the very useful information...the only thing i must do now is to buy Datel Tool Battery right?
|
AfterDawn Addict
|
3. February 2008 @ 12:53 |
Link to this message
|
|
Yes buy a Datel Tool battery.
Then run the easy installer to make the Magic memory Stick then place the Datel Tool Battery into the PSP. Then the menu will come up letting you install 3.71 M33-2 to your PSP.
After it has been installed replace the Datel Tool battery with your normal battery.
|
|
panas
Newbie
|
3. February 2008 @ 12:55 |
Link to this message
|
|
thank u very much...is it expensive??(if u know)
|
|
kidyugi1
Junior Member
|
3. February 2008 @ 19:00 |
Link to this message
|
|
IM not sure if im reading correctly, but is there any reason why i cant use another psp battery to convert to pandora and bring it back to normal.
|
Member
|
4. February 2008 @ 10:36 |
Link to this message
|
Originally posted by kidyugi1:
IM not sure if im reading correctly, but is there any reason why i cant use another psp battery to convert to pandora and bring it back to normal.
you can use your primary or a second battery and bring it back to normal np, it's up to you
I love psobb but i need a credit card # to get back on :(
|
|
kidyugi1
Junior Member
|
4. February 2008 @ 12:24 |
Link to this message
|
|
Thanks,
Im sorry for the questions but:
With the guide, I am ONLY using a Fat PSP to make the magic stick and pandora battery. At what point do I use them to downgrade the slim PSP running 3.71 official FW.
Thanks
|
|
Advertisement
|
|
|
|
pspman29
Newbie
|
4. February 2008 @ 15:38 |
Link to this message
|
|
does this work for slims too?
|
