Originally posted by DNT5:

---

I've read what everyone's said in regard to Error 001, but it still doesn't make sense.

Firstly, the 10-15% trick isn't relevant because I'm on an NTSC-JPN Wii and so I let the update run all the way (it's the same region, so there's no risk of duplicated channels.) The error is happening to people on both NTSC-USA and NTSC-JPN Wiis who have either done or not done the 10-15% trick. This means the 10-15% trick probably has nothing to do with it.

Secondly, I'm pretty sure BrickBlocker has nothing to do with it either. Since I let the update run all the way, I can boot and play a non-BrickBlocked DVD5 just fine. And again, the problem is that the DVD9 will not boot directly, neither BrickBlocked or non-BrickBlocked. It will only run via swap trick. I'm guessing that NTSC-USA players that have used the 10-15% trick need the BrickBlocked version to even boot, but that has nothing to do with Error 001. I'm pretty sure BrickBlocker is irrelevant to this problem as well.

Thirdly, I'll try the 3x speed setting tomorrow, but like beertent said, that doesn't explain the swap trick working to play the DVD9 copy just fine at 6x setting. Maybe the 3x setting is a workaround, but it's not the solution and doesn't explain the problem. (And quite frankly, I'd rather use the swap trick and have faster load times.)

I've been slowly eliminating non-relevant factors one by one, but we still haven't narrowed it down to the one that's causing the problem. I already knew that the above factors were non-relevant, so I still haven't gotten anywhere with this problem since I made the post.

Anyone else got any ideas?

---

Originally posted by 5quare:

---

I've been stuck for awhile now and figured it's time to ask for help before I waste another DL dvd.

my wii:
NTSC/u 3.1u
D2CKey

0. Burned 4.7GB rip and did the 15% trick.

1. Burned a brickblocked (with the new brickblocker w/ DL support) copy on verbatim DVD+R DL with imgburn @ 2.4x and the Wii couldn't read the disc.

2. Put the 4.7GB rip back in and did the full install and tried the DL disc again. Didn't read.

3. Burned an untouched ISO with cloneCD at 2x on another verbatim disc. Same problem.

4. Read that someone kept resetting the system until the Wii read it. I tried this, eventually this worked. Although it crashed just as the intro movie started. I haven't been able to get the Wii to read it again using this method.

5. Burned another copy that was regionfrii'd and burned @ 2.4x with imgburn on the Verbatim. Wii still not reading the disc.

Any other things I can try?

---

Quote:

---

If i update my wii with the DVD9 version of SSBB all the way, then does that mean that I only have to make one copy of the game and not have to make the DVD5. I would think this because I wouldn't have to update with the DVD5 version, and not have to brickblock the 2nd copy if I update the wii all the way, and just get dual channels.

---

Originally posted by firefox13:

---

There are a couple of things that could be the problem.

First off, I have heard from quite a few people that the D2CKey is having trouble reading the burned DVD9 copy. Some people are saying that it is because the laser is set at 6x speed and it needs to be at 3x (I'm not really sure what all that means as I haven't messed with those settings, but if that is the problem then I don't know what you can do about it)

Second, what kind of Verbatim DVD's do you have? Many people are saying that the ones made in India are very poor quality and don't work very well where as the ones made in Singapore work much better.

Also, have you tried the swap method. Put in the working DVD5 until you get to the main menu, eject it, and put in the DVD9. I know it will be annoying, but if it does work then you can at least do that until you can figure out why it's having trouble just booting the DVD9.

---

Originally posted by BreakJ:

---

So the D2Ckey isn't working at all with the DVD9? What if you perform the full update rather than try the swap method?

---

Originally posted by AkariK:

---

Originally posted by BreakJ:

---

So the D2Ckey isn't working at all with the DVD9? What if you perform the full update rather than try the swap method?

---

I don't know how to do the full update, as mine didn't finish (as far as I can tell) and yet neither DVD5 or 9, brickblock or no brickblock, even tries to bring the update up anymore. I didn't swap by design, I was forced into it when my update crashed...

---

Originally posted by AkariK:

---

Sorry, but I'm a noob and need help. I've got D2CKey, and had 3.1U firmware. Burned Brawl DVD5 without brickblocker, updated to 50%, at which point it froze up entirely. Then I burned a DVD5 with brickblocker and it was working fine. I've got the duplicate channels, but that doesn't matter.

Now I have the DVD9 iso, and it freezes after the 'Now Loading' screen - it gives a solid white screen and stops there. I tried discswapping, and re-burning with brickblocker (and at slower speed with ImgBurn instead of Nero), but it still freezes.

Any help would be appreciated, thanks!

edit: I forgot to mention, my dvds are GQ dvd+r duallayer (the single layers were also burned on GQ - and worked fine! - but I've since bought some Verbatims for future Wii games)

---

Originally posted by mitch3a:

---

Two quick questions: has anyone actually had their wii bricked attempting to do this? and secondly, is there any way to avoid burning the dvd5 iso and just use the dvd9?

Currently Running
Wiikey with update 1.9g
pretty sure 3.1U

Thanks guys

---

Originally posted by mitch3a:

---

Two quick questions: has anyone actually had their wii bricked attempting to do this? and secondly, is there any way to avoid burning the dvd5 iso and just use the dvd9?

Currently Running
Wiikey with update 1.9g
pretty sure 3.1U

Thanks guys

---