|
Super Smash Brawl - Asking for d/l , seeding or posting a direct link = ban
|
|
|
Asking for downloads, seeding or posting a direct link will get you banned.
|
|
firefox13
Member
|
10. March 2008 @ 19:18 |
Link to this message
|
Originally posted by magic_bus:
So about my quick question... is there any reason unplugging the power during the update (not the test either, the actual update with the red text)isn't corrupting my Wiikey?
What version firmware is your wiikey? You have to use a firmware of a different version than your current one. If you have 1.9g then try using 1.9b and vice versa.
Quote:
I really need this answered...
I was attempting to burn SSBB and it got to 99% when it said "Failed to close track" or something like that and then I clicked cancel and then it "failed to finalize".
What is my problem? Bad disk? I am using IMGBurn with Memorex R+ DL disks.
What iso are you using? I dumped my own and burned it just fine with ImgBurn and the same disks you are using, so my guess would be that it is a problem with the iso, however, you might want to try the burn again, it might have just had a problem the first time.
Quote:
Never use Memorex under any circumstances, ever.
I have used Memorex DVD+R DL for both the JAP Brawl and the US Brawl. Both worked for on the first burn with no problems. I would say they are reliable.
|
|
Advertisement
|
|
|
|
|
magic_bus
Junior Member
|
10. March 2008 @ 19:20 |
Link to this message
|
|
|
|
cyberrico
Junior Member
|
10. March 2008 @ 19:26 |
Link to this message
|
Originally posted by Landoncz:
I really need this answered...
I was attempting to burn SSBB and it got to 99% when it said "Failed to close track" or something like that and then I clicked cancel and then it "failed to finalize".
What is my problem? Bad disk? I am using IMGBurn with Memorex R+ DL disks.
I'm about to start my burn. My computer is excellent and I'm sure that I won't get any buffer problems but I have had a lot of bad luck in the past with browsing the web and running programs while burning Wii games. When I am done extracting the ISO, I will reboot, shut down ALL programs that I don't need and I will set my screensaver to not activate for an hour.
And sometimes I have to try more than once. That error you got is something that I have seen in the past and it just kind of went away for me.
|
|
lostuncw
Newbie
|
10. March 2008 @ 19:27 |
Link to this message
|
|
Just adding some info, I have Wiikey. I played JPN Smash ISO for month now (I used the 15% update trick), and just got the Wiizard ISO rip. I had to initialize system update for USA Smash but after that it is running fine no problems. Even Wifi works.
|
|
Butt101
Member
|
10. March 2008 @ 19:36 |
Link to this message
|
Originally posted by pommyKID:
Oh cool but can't you just PM the link to the people who ask for it like me?
here is what u do (not posting any links) go to mininova and search ssbb and u better seed because ill do the same for you.
|
|
pommyKID
Newbie
|
10. March 2008 @ 19:39 |
Link to this message
|
|
nothing popped up
|
Junior Member
|
10. March 2008 @ 19:39 |
Link to this message
|
Originally posted by firefox13:
Originally posted by magic_bus:
So about my quick question... is there any reason unplugging the power during the update (not the test either, the actual update with the red text)isn't corrupting my Wiikey?
What version firmware is your wiikey? You have to use a firmware of a different version than your current one. If you have 1.9g then try using 1.9b and vice versa.
Quote:
I really need this answered...
I was attempting to burn SSBB and it got to 99% when it said "Failed to close track" or something like that and then I clicked cancel and then it "failed to finalize".
What is my problem? Bad disk? I am using IMGBurn with Memorex R+ DL disks.
What iso are you using? I dumped my own and burned it just fine with ImgBurn and the same disks you are using, so my guess would be that it is a problem with the iso, however, you might want to try the burn again, it might have just had a problem the first time.
Quote:
Never use Memorex under any circumstances, ever.
I have used Memorex DVD+R DL for both the JAP Brawl and the US Brawl. Both worked for on the first burn with no problems. I would say they are reliable.
Should I get IMGBurn 2.4?
Should I change the dual layer setting to 2084960?
What should my write speed be?
|
AfterDawn Addict
|
10. March 2008 @ 19:41 |
Link to this message
|
sucks that you can't copy the brawl save onto a sd card; tried myself just now. that means whenever you take brawl to someone elses house, you have to start from scratch.
so if you unlocked everything, you'll have the joy of doing it again on a different wii.
ps2: v7 scph-39001 - independence exploit - hdloader 0.8c - maxtor 300gb hdd
(+[__]%) psp slim ta-085v1: 6.60 PRO B10
wii (powered by bootmii/priiloader): 4.1u - d2x v10beta53-alt (base 56) - configurable usb loader v70r51/devolution r188 - wd scorpio black 7200rpm 320gig w/ ams venus ds2 enclosure
got a whole lot more to list . . .
This message has been edited since posting. Last time this message was edited on 10. March 2008 @ 19:43
|
|
pommyKID
Newbie
|
10. March 2008 @ 19:44 |
Link to this message
|
|
Nvm, I'm downloading the .iso and it's at 1% lol
|
|
Boco77
Junior Member
|
10. March 2008 @ 19:44 |
Link to this message
|
Could someone please tell me how you actually make a dual layer break on the wiizard iso of the game? everyone says just dual layer break it to a specific amount but HOW do you even do this in imgburn?...
|
|
Butt101
Member
|
10. March 2008 @ 19:48 |
Link to this message
|
ok here is what you do add me on xfire and ill send your the torrent link ... that i used ... name: halowanabe (codey taylor) <--- if that helps?
This message has been edited since posting. Last time this message was edited on 10. March 2008 @ 19:50
|
|
lostuncw
Newbie
|
10. March 2008 @ 19:49 |
Link to this message
|
Originally posted by Boco77:
Could someone please tell me how you actually make a dual layer break on the wiizard iso of the game? everyone says just dual layer break it to a specific amount but HOW do you even do this in imgburn?...
I just burned it default. Max speed. HP DL disc
|
|
firefox13
Member
|
10. March 2008 @ 19:49 |
Link to this message
|
Quote:
Should I get IMGBurn 2.4?
Should I change the dual layer setting to 2084960?
What should my write speed be?
I don't know what version of ImgBurn I used, but it definitely wasn't the newest since it asked me to update and I said no. I'm not at the computer I used to burn it, but when I go back to it I'll look at the version
I didn't set the layer break. I have burned both the JAP version and the US version and both worked fine without a layer break.
I always set it at 2x speed (although it ends up burning at 3.9x (don't know why).
|
|
pommyKID
Newbie
|
10. March 2008 @ 19:51 |
Link to this message
|
|
I still don't understand what's so hard about PMing the link
Piracy in PMs is also NOT allowed
This message has been edited since posting. Last time this message was edited on 10. March 2008 @ 21:00
|
|
Fero
Junior Member
|
10. March 2008 @ 20:01 |
Link to this message
|
|
I see two different backups,
ones from wiizard and the other one is "Super Smash Bros Brawl NTSC_USA - Confirmed Working -emcubed_Afterdawn"
do they both work?
|
|
Butt101
Member
|
10. March 2008 @ 20:01 |
Link to this message
|
Originally posted by pommyKID:
I still don't understand what's so hard about PMing the link
well its so hard because it doesn't exist any more for some reason but i did how ever download the torrent file
|
|
Butt101
Member
|
10. March 2008 @ 20:02 |
Link to this message
|
|
get emcubed
|
|
jupiterak
Junior Member
|
10. March 2008 @ 20:02 |
Link to this message
|
Originally posted by pommyKID:
Oh cool but can't you just PM the link to the people who ask for it like me?
NO, the search button is your best friend:rolleyes:
|
|
pommyKID
Newbie
|
10. March 2008 @ 20:07 |
Link to this message
|
|
I'll just do the looooong .iso download then and wait..
|
|
Hyperian
Newbie
|
10. March 2008 @ 20:17 |
Link to this message
|
if there was one game you should buy you should definitely buy SSBB :)
besides, buying it now and ripping it and burning it into a DL would be way faster than downloading it lol.
but i guess everyone has their own ways :)
I ripped and am currently burning the image with the 2084960 split setting on verbatim 2.4x DL disc using imgburn. The same imgburn version and split setting used to make my working DL JP SSBB.
in fact, here's some numbers if you decided to buy ssbb and rip it using Friidump 0.4.0
Filesize: 7.92GB (8,511,160,320)
CRC32: 36b270cd
MD4: 99bbf3e8a7f991b7a481fa5aeec2a2f8
MD5: e4a8a47da995746c0f78e3d214795678
SHA-1: 1ff14beb71a334a9c55d4d8a978931503a95dfda
ED2K: cfea1ce519bcfd8e957e3da93e64d6c8
above numbers were confirmed in another forum to be the same as mine. And it only took me 1 hour to rip it, weird.
|
|
noz1
Newbie
|
10. March 2008 @ 20:24 |
Link to this message
|
Originally posted by Hyperian:
if there was one game you should buy you should definitely buy SSBB :)
besides, buying it now and ripping it and burning it into a DL would be way faster than downloading it lol.
but i guess everyone has their own ways :)
I ripped and am currently burning the image with the 2084960 split setting on verbatim 2.4x DL disc using imgburn. The same imgburn version and split setting used to make my working DL JP SSBB.
in fact, here's some numbers if you decided to buy ssbb and rip it using Friidump 0.4.0
Filesize: 7.92GB (8,511,160,320)
CRC32: 36b270cd
MD4: 99bbf3e8a7f991b7a481fa5aeec2a2f8
MD5: e4a8a47da995746c0f78e3d214795678
SHA-1: 1ff14beb71a334a9c55d4d8a978931503a95dfda
ED2K: cfea1ce519bcfd8e957e3da93e64d6c8
above numbers were confirmed in another forum to be the same as mine. And it only took me 1 hour to rip it, weird.
Is everyone who is dumping themselves using the special LG drives or are they winging it and using whatever drive they have? Just wondering, cause I'd love to dump it myself but I have only a ben-q or sony drive...
Thanks.
|
|
pommyKID
Newbie
|
10. March 2008 @ 20:26 |
Link to this message
|
|
I bought the game..it didn't work..I'm going to burn the game
|
|
Butt101
Member
|
10. March 2008 @ 20:28 |
Link to this message
|
|
do you need a special dvd drive to burn ssbb DL to a DL disc? and also is there a way i just put the multiplayer of ssbb english version on a sl disc? i herd a guy did it and it worked i wouldnt know how about to do this... feed back would be wonderful
|
|
hushicho
Newbie
|
10. March 2008 @ 20:35 |
Link to this message
|
If someone could please respond, I'd appreciate it. I don't want to waste this last disc on just crap that won't even do anything, like the first four discs of this five-pack.
I put them in the Wii, they don't even make the 'loading' sound. They just go in and sit, pretty much. Never come up on the disc channel, don't even register as having anything on them on the computer, even though the burns were verified as being true.
I have tried changing booktype, using excellent media (Verbatim, which has so far had a miserable track record as far as I'm concerned), and burning at various speeds. Slow, medium, max, none worked properly. I tried cleaning the lens. It doesn't work. It makes no difference.
I would like to know something that actually works. The burner can burn DL DVDs and has done so successfully before. There is just something about this that isn't working. Any ideas? My details were given earlier in the thread, if anyone would be so kind. Thank you.
|
|
Advertisement
|
|
|
|
Butt101
Member
|
10. March 2008 @ 20:39 |
Link to this message
|
Originally posted by hushicho:
If someone could please respond, I'd appreciate it. I don't want to waste this last disc on just crap that won't even do anything, like the first four discs of this five-pack.
I put them in the Wii, they don't even make the 'loading' sound. They just go in and sit, pretty much. Never come up on the disc channel, don't even register as having anything on them on the computer, even though the burns were verified as being true.
I have tried changing booktype, using excellent media (Verbatim, which has so far had a miserable track record as far as I'm concerned), and burning at various speeds. Slow, medium, max, none worked properly. I tried cleaning the lens. It doesn't work. It makes no difference.
I would like to know something that actually works. The burner can burn DL DVDs and has done so successfully before. There is just something about this that isn't working. Any ideas? My details were given earlier in the thread, if anyone would be so kind. Thank you.
Um God hates you?
|
