|
Super Smash Brawl - Asking for d/l , seeding or posting a direct link = ban
|
|
|
Asking for downloads, seeding or posting a direct link will get you banned.
|
|
Sythron
Member
|
29. March 2008 @ 15:09 |
Link to this message
|
Originally posted by juniR:
Originally posted by Sythron:
Can anyone help me? Do I have to update to 1.9s? I have a 3.2U system with the Brawl update right now.
SSBB runs on 1.9g and 1.9s. I see no reason why ppl don't go to 1.9s myself. The main fix in 1.9s is for Original SSBB but who knows? It may help some media compatability with backups.
Yes, I just did the update to 1.9s but my burned copy of Brawl still doesn't work! I don't understand, it was working before...
It really sucks cause when Brawl was released I bought a retail copy and then realized it didn't work so I sold it for $40 (losing $15) and just burned a copy and now the burned copy doesn't work!
:(
Anyone else who can help please do.
|
|
Advertisement
|
|
|
|
|
DrewnMods
Junior Member
|
29. March 2008 @ 16:22 |
Link to this message
|
Originally posted by Sythron:
Originally posted by juniR:
Originally posted by Sythron:
Can anyone help me? Do I have to update to 1.9s? I have a 3.2U system with the Brawl update right now.
SSBB runs on 1.9g and 1.9s. I see no reason why ppl don't go to 1.9s myself. The main fix in 1.9s is for Original SSBB but who knows? It may help some media compatability with backups.
Yes, I just did the update to 1.9s but my burned copy of Brawl still doesn't work! I don't understand, it was working before...
It really sucks cause when Brawl was released I bought a retail copy and then realized it didn't work so I sold it for $40 (losing $15) and just burned a copy and now the burned copy doesn't work!
:(
Anyone else who can help please do.
Aww cheer up you can have my wii for free with three payments of 200 dollars
: )
I enjoy going down to the store, and spending money on blank dvds.
 |
|
Sythron
Member
|
29. March 2008 @ 16:47 |
Link to this message
|
|
I don't know what the point of your last message message was but it was pretty stupid.
|
|
GorWar
Suspended due to non-functional email address
|
29. March 2008 @ 18:08 |
Link to this message
|
Hey, I have a PAL Wii and a Wiikey, I just downloaded a NTSC version of Super Smash Brothers Brawl and it asks to update? Should I? Would it Brick? I tried Brick Blocker but it says my ISO is not valid :(. Isn't the latest 1.9s firmware supposed to block the updates? Also isn't the latest firmware 1.9s not 1.9g as said in the first post?
|
|
GorWar
Suspended due to non-functional email address
|
29. March 2008 @ 23:10 |
Link to this message
|
|
mm I used the Config 1.4 and now it doesnt ask for the update BUT IT SAYS unathurised device detected.
|
|
juniR
Suspended due to non-functional email address
|
30. March 2008 @ 06:37 |
Link to this message
|
Originally posted by GorWar:
Hey, I have a PAL Wii and a Wiikey, I just downloaded a NTSC version of Super Smash Brothers Brawl and it asks to update? Should I? Would it Brick? I tried Brick Blocker but it says my ISO is not valid :(. Isn't the latest 1.9s firmware supposed to block the updates? Also isn't the latest firmware 1.9s not 1.9g as said in the first post?
SSBB has an update which is required to play the game. There is no way it can run without the update. If your Wii is updated online to 3.2E then you will be safe from bricking. SSBB will update your Wii only with the game update and not the firmware update.
Wii 3.2E w/ Wiikey 1.9s :: PSP 3.90 M33-3 :: NDS w/ R4DS :: Nokia N95
|
|
my2cent
Newbie
|
30. March 2008 @ 06:52 |
Link to this message
|
ppl with squirtle mario water gun freeze turn ur wii tv settin to 60hz, no freeze there.
|
Junior Member
|
30. March 2008 @ 06:56 |
Link to this message
|
i downloaded a single layer version and i have the following problems:
Everything plays norm as long as its on 50hz mode; 60hz=black screen but game still plays (you can hear it)
Space E. mode has a slowdown of frame-rate
films dont play
also, i noticed that the first time i played it i didnt create a save file which oddly enough never caused the slowdown i see in space emissary, it played normal, but after i created a save file it started to slow down.
Anyone have any clues on how to fix these problems?
My wii btw is PAL 3.2 with a 1.9s wiikey. SSBB is a patched NTSC
This message has been edited since posting. Last time this message was edited on 30. March 2008 @ 06:58
|
|
my2cent
Newbie
|
30. March 2008 @ 06:58 |
Link to this message
|
|
try deflicker off then 60hz mode, should work.
|
Junior Member
|
30. March 2008 @ 07:01 |
Link to this message
|
|
whats deflicker?
|
|
my2cent
Newbie
|
30. March 2008 @ 07:01 |
Link to this message
|
|
game option in ssbb
|
|
Newfee
Member
|
30. March 2008 @ 13:22 |
Link to this message
|
Originally posted by cee43ja1:
the best thing to do is to keep your modchip updated with the latest firmware. strong chance it's because you have 1.2 ARGON firmware.
Just an update...after about 10 coasters I think i got it right.
Updated my Argon firmware to 1.8. Updated Wii firmware to 3.2. Burned with ImgBurn with layer break on FujiFilm DL media. Updated from SSBB disk.
Works great. I tried without layer break and got to a white screen where nothing happened so did another burn and it now works. The Wii does make a lot more noise now (laser?).
|
Junior Member
|
30. March 2008 @ 14:47 |
Link to this message
|
|
woohoo! i got a single layer version to run with no glitches or nothing. only the movie clips dont work but i dont care since i can now play space emissary mode!
Thanks everyone and especially my2cent cos i think its fixed thanks to the deflicker!
|
|
eyenight
Junior Member
|
30. March 2008 @ 17:39 |
Link to this message
|
Basically Im really confused about how to play SSBB on my PAL wii which is equipt with an argon chip (inc the 4 extra threads) - everywhere is saying something different + the advice only seems to be concerning the wiikey chip T_T
Should i download a dvd5 version - will i loose any game modes or anything if i do? and then after that what patches do i need to apply to the iso image so it doesn't brick my wii? thanks a lot
|
|
lucasdnd
Newbie
|
30. March 2008 @ 21:24 |
Link to this message
|
Damn!!!!!!!!!!
I played ssbb for 12 minutes!
played as Link, the classic mode.. AWESOME
but then i left the game, when i was going to come back... unable to read the disc!!! for 3 days now its not reading any backups anymore.
I have a d2b wii, 3.2U, wiikey 1.9g. what could it be?
|
|
Hillbelly
Newbie
|
30. March 2008 @ 22:03 |
Link to this message
|
Yea so I was trying to make a copy of a back up SSBB using Nero. It read around to 7% I got an error message. So I tried extracting the iso from the copy to my pc using ImgBurn. It poped up a error message around 7% also. Then I dled the SSBB iso then try to burn it on a dual layer +Rdl windata using ImgBurn. I got a error message "Optimum Power Calibration Failed! Reason: Power Calibration Area Is Full" Any Ideas?
|
Moderator
|
30. March 2008 @ 22:18 |
Link to this message
|
|
@Hillbelly
There's a few causes for the power calibration error but usually it's firmware and/or media.
Make sure the firmware on the drive is update and try taking down the burn speed a notch.
Still a no go or no firmware update then switch the media.
|
|
Pokemanic
Newbie
|
31. March 2008 @ 00:53 |
Link to this message
|
I have a single layer disc with the green screen right after the warning and it says loading. I run a DVD5 Jap. Version on my JP Wii and Wiikey. Am I suppose to press a button or button combination to skip the opening?
|
|
my2cent
Newbie
|
31. March 2008 @ 08:07 |
Link to this message
|
Originally posted by polyd8:
woohoo! i got a single layer version to run with no glitches or nothing. only the movie clips dont work but i dont care since i can now play space emissary mode!
Thanks everyone and especially my2cent cos i think its fixed thanks to the deflicker!
np man i had ur problem too, if anyone have problem with ssbb on pal d2ckey u can mail me, maybe i can help u. *email removed*
This message has been edited since posting. Last time this message was edited on 31. March 2008 @ 08:40
|
Moderator
|
31. March 2008 @ 08:42 |
Link to this message
|
|
my2cent - email address removed, Forum Rules are in my signature; plus let's ditch the annoying text speak and use whole, real words in future
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
Full_Tilt
Suspended due to non-functional email address
|
31. March 2008 @ 09:34 |
Link to this message
|
Hello everyone,
This site is wonderful and has helped me tremendously. I have a success story I wanted to share, with step by step instructions on how I got my SSBB to work. This is my first post here so bare with me.
I currently have an (A)chip Wii (bought the Wii the first day it came out) I installed the Wiikey no issues at all.
For my dump, burn, and play of SSBB without any errors or coasters I did as followed.
I bought SONY DVD+R DL, media BestBuy had them for 25.99$ for 10 at the time.
I grabbed SSBB from a buddy and began to use FRIIDUMP .4 on it without any issues what so ever. Perfect dump Filesize: 7.92GB (8,511,160,320) is what you should aim for, and for those getting the file from else where can use this number as a reference. LG 8164 was used to dump the image.
After that I used IMGBURN at a x2 speed (SONY DVD burner)with the default burning options (did not touch one thing with IMG burn) other than burn the .iso onto my SONY DL disk.
IMG finished the burn successfully and reached 100%.
Turned on my wii without testing SSBB just yet.
I updated the firmware of the wii via the control panel method.
I placed the SSBB disk in. (Icon showed up with 'updated needed message')
Clicked on the icon, let it run its course.
Few seconds later, SSBB screen showed up in the wii channel.
No duplicate channels were made.
1.9g beta was the currently flashed on the wiikey.
SSBB works flawlessly on everymode, single, multi etc...
I also tested my old backed up games and they work flawlessly. (BTW I use HP media, I find them as reliable as SONY media)
Please feel free to ask any questions or if one of the steps is a bit jumbled and is difficult to understand. Wanted to give back a bit to the people that introduced me to the wiikey.
Sorry if this has already been posted, just trying to help out.
|
|
chrono08
Newbie
|
31. March 2008 @ 11:40 |
Link to this message
|
hi, im kinda new here, so if u could help me it would be great...
bought a wii 2 months ago in the US, i modded it but dont know which mod is it, i updated to 3.2U (i think thats the last update, just last week) and play backup games without any problem. Once i got a backup copy of brawl it didnt read and showed a disc error, im wanted to play ot and consider to buy the original but i dont want to pay if with the original i still could have read problem, so my question is, will a kinda new wii have problem reading the original DL and will the mod get in the way? and how can i see which mod i have, do i have to open and see something?
|
|
Newfee
Member
|
31. March 2008 @ 12:06 |
Link to this message
|
Originally posted by chrono08:
hi, im kinda new here, so if u could help me it would be great...
bought a wii 2 months ago in the US, i modded it but dont know which mod is it, i updated to 3.2U (i think thats the last update, just last week) and play backup games without any problem. Once i got a backup copy of brawl it didnt read and showed a disc error, im wanted to play ot and consider to buy the original but i dont want to pay if with the original i still could have read problem, so my question is, will a kinda new wii have problem reading the original DL and will the mod get in the way? and how can i see which mod i have, do i have to open and see something?
I got my Wii last month and got it modded. Worked for all my backups, but not SSBB. I have an Argon chip and turns out all I needed was to update the chip. So I would try to find out what mod you have and then see if you need it updated.
|
|
juniR
Suspended due to non-functional email address
|
31. March 2008 @ 13:22 |
Link to this message
|
Originally posted by chrono08:
bought a wii 2 months ago in the US, i modded it but dont know which mod is it,...
If the Wii is only 2 months old the modchip is prolly D2CKey but I can't be 100% certain. If it is, then it should play the original SSBB and in fact if the Wii is only 2 months old and it's a GC2-D2C model (most likely) then it should play original SSBB regardless of the chip. You can check here.
http://wiitracker.nintendo-scene.com/search.php
I'd still try and identify the modchip because if it's not a D2CKey then it is likely to need updating in the future.
Wii 3.2E w/ Wiikey 1.9s :: PSP 3.90 M33-3 :: NDS w/ R4DS :: Nokia N95
|
|
Advertisement
|
|
|
|
chrono08
Newbie
|
31. March 2008 @ 14:06 |
Link to this message
|
|
ok thanx for the info, but how can i check what chip it has? the name is on the chip? also, how can i update a chip? thanx
|
