Originally posted by sarahash:

---

Thanks Sc0user your a pet. Here goes nothing!!

---

Originally posted by sarahash:

---

Ok,Ty, My PC is less then a year old and cost 900 euro you would think it would have a 9 pin serial socket. Anyway I will have to put it off for another day or so! No good telly again tonite. Thanks again Sc0user srry for being a dumb blond :-)

---

Quote:

---

Look at HiTechs post below SG8's

---

Originally posted by lyndon70:

---

need the lastest firmware for my mate's black 2008 box tried the links on this forum downloaded the right one but when i open it up there's nothing there.can anyone put me on to the right link
thanks

---

Originally posted by SG8:

---

Updating Eurovox Max V with Kuro 18.04.08 UPDATED (software now works with Chorus as well)

1. Hook up your Eurovox to your PC using a null modem cable. (9 pin female to 9 pin female). Null Modem Cable must be used, looks the same as a standard RS232 lead but it is wired differently.


2. Run the Kuro Unified Flash Loader (download it here: http://www.mediafire.com/?xynenwxvyjy )

2a (Optional step: Press the Upload button to save your channel set up favourites etc as they currently are) Save this to a folder on your PC for use later.

3. Click on the 'download' button at the top of the screen.

4. The program will say 'Version 2.10 detected' (or it may say some other version!) and restart your Eurovox, it will then go through the downloading process, when finished it
will display 'Downloading is successful' .

5 . Press the Menu button on your remote, and then go into 'Config' menu and select 'Clear Data'

6. It will then ask for your PIN (default is 0000)

7.Then select 'Factory Default'

8. It will then ask you to select the symbol rate (I use 6.887 as I am on NThell Dublin).not sure if this matters at this stage though.

9. Press OK when 'Reset to Factory Default Settings' comes up

10. It will then say 'Wait to Factory Settings' and will then start to do a Full Power Scan (using the Symbol rate you selected earlier or you can change the symbol rate here)

11. It will then search through for channels, Go and make a cup of tea while it works away, do not interrupt it until it finishes.

12. It wil then exit to allow you to view your programs, but the code being updated message will probably come up for a while,

13. Put the box onto Sky Sports and go make another cup of tea. It may only take a few mins but again do not interrupt it (even if you think it is not working!)

14. Sky Sports will come up and all your channels will be back and you won't have to manually enter your codes anymore.

15. If you did the optional step at 2a, then browse to where you saved your file (CDF file) and click download in the lower box on the Kuro program, and it will reload your favourites etc. as
you originally had them.

---

Originally posted by HiTeck:

---

Quote:

---

Look at HiTechs post below SG8's

---

sc0user..... Who's HiTech? ;)

---