Originally posted by MICKAH:

---

Np mate,

@reswob,

is the scarts pushed in all the way on both the box and TV? Is the box on mute? Is the sound lowered right down?

---

Originally posted by MICKAH:

---

factory reset and rescan and see if it helps
SCANNING FOR CHANNELS.

Go to AUTOMATIC SCAN and choose your provider.
Choose NETWORK SCAN
Wait until a list of network ID's come on screen and choose the one for your area (DUB LEGACY)
Once your chosen ID is highlighted press the GREEN button, the box will start to scan for transponders. Do not worry if this takes some time and appears to be doing nothing.
The box will start to scan all transponders, don't worry if it says that some already exist.
Once the TP scan is completed the box will scan for available channels.
When the channel scan is finished the box will reboot.
Pick a scrambled channel and wait to clear, it it takes a long time switch off at mains and on again, sometimes the emu doesn't kick in straight away ;D
When channels are clear, pressing the RED button brings up a list of category choices. Green will bring up the pre-sorted categories.
If you renumber any channels to a personal preference then switch OFF powerscan mode otherwise it will re-scan them into their original positions.

---

Originally posted by steviej84:

---

Ok first tim poster long time follower. Can anyone tell me wat I need to get free channels back again. Im in Galway city. I had one of the starview boxes dunno which one but got it bout two years ago. all help appreciated.

---

Originally posted by MICKAH:

---

sounds like something is gone on it, could be a board issue perhaps, if ya done the above and checked yer leads etc, one thing to try is hit the audio button and see what its on,

Is it a new box?

---

Originally posted by reswob:

---

Originally posted by MICKAH:

---

sounds like something is gone on it, could be a board issue perhaps, if ya done the above and checked yer leads etc, one thing to try is hit the audio button and see what its on,

Is it a new box?

---

bli=eng stero

---

Originally posted by steviej84:

---

Ok cheers mate so whats the recommendations the kryptview is it? are the attainable in the glaway region.

---

Originally posted by MICKAH:

---

have ya tried using audio cables out of the box? RED, WHITE and YELLOW and connect it to a home cinema or a TV, just to see if its the scart connection is working.

If you do the above and no sounds comes out, I would contact yer supplier, sounds like a prob with the board if ya done all the above,

---

Originally posted by MICKAH:

---

Did you unpack or unrar the file?

It has to be a BIN file that you are loading to the box, not exe or rar or zip, if you unpack the file using WINRAR or 7-zip and put it on the desktop, start the loader and select the BIN file for the box and press download and then follow this

Go to AUTOMATIC SCAN and choose your provider.
Choose NETWORK SCAN
Wait until a list of network ID's come on screen and choose the one for your area in Dublin its(DUB LEGACY)
Once your chosen ID is highlighted press the GREEN button, the box will start to scan for transponders. Do not worry if this takes some time and appears to be doing nothing.
The box will start to scan all transponders, don't worry if it says that some already exist.
Once the TP scan is completed the box will scan for available channels.
When the channel scan is finished the box will reboot.
Pick a scrambled channel and wait to clear, it it takes a long time switch off at mains and on again, sometimes the emu doesn't kick in straight away ;D
When channels are clear, pressing the RED button brings up a list of category choices. Green will bring up the pre-sorted categories.
If you renumber any channels to a personal preference then switch OFF powerscan mode otherwise it will re-scan them into their original positions.

---

Originally posted by MICKAH:

---

Did you unpack or unrar the file?

It has to be a BIN file that you are loading to the box, not exe or rar or zip, if you unpack the file using WINRAR or 7-zip and put it on the desktop, start the loader and select the BIN file for the box and press download and then follow this

Go to AUTOMATIC SCAN and choose your provider.
Choose NETWORK SCAN
Wait until a list of network ID's come on screen and choose the one for your area in Dublin its(DUB LEGACY)
Once your chosen ID is highlighted press the GREEN button, the box will start to scan for transponders. Do not worry if this takes some time and appears to be doing nothing.
The box will start to scan all transponders, don't worry if it says that some already exist.
Once the TP scan is completed the box will scan for available channels.
When the channel scan is finished the box will reboot.
Pick a scrambled channel and wait to clear, it it takes a long time switch off at mains and on again, sometimes the emu doesn't kick in straight away ;D
When channels are clear, pressing the RED button brings up a list of category choices. Green will bring up the pre-sorted categories.
If you renumber any channels to a personal preference then switch OFF powerscan mode otherwise it will re-scan them into their original positions.

---

Originally posted by MICKAH:

---

ahhh, you running vista? you may need to look at your drivers or port settings, you using a null modum adapter? you may need to look here

http://www.gilsson.com/usb_drivers_download.htm

and here

http://forums.afterdawn.com/thread_view.cfm/779888

or flash it on a PC with XP

---