|
Jungle Flasher Tutorial for STOCK 83850C Lite-ON (pictures included)
|
|
|
pornzi
Junior Member
|
24. September 2009 @ 04:18 |
Link to this message
|
Originally posted by jonturbo:
Stupid question but...do you need to remove the dvd drive from the system to connect to sata? I have only recently taken off the covers of the xbox but realized I dont have the correct torx screws to remove the metal plate. Also, there's this silver seal on my dvd drive, is there a way to remove it without breaking it, like the warranty seal on the front. Thanks
Easy to connect sata cable to the drive dont need to take drive out at all
|
|
Advertisement
|
 |
|
|
|
Hincey
Newbie
|
24. September 2009 @ 04:18 |
Link to this message
|
Well then thank you ever so much for taking the effort to write the guide and hopefully this will be the last time I spam your thread :)
Just one quick question tho: I'm pretty sure that the problem I had with my flash was that the xbox powered down just after I had erased the drive losing the detection of it in JF. Could this power down have been avoided if I would have put the AV cable into the back of the xbox while trying to flash? Have just read about this method today, if it is possible to do so then it might be a good idea to mention that in your guide.
Thanks again, all the help was greatly appreciated.
Edit: just seen pornzi's post. That's kinda what happened to me I think. Couldn't see the drive in JF after I hit the liteon erase button. If you can remember which port you got it working on before then just try liteon erase again with that port selected. You may have to point JF to your dummy.bin that you already extracted after that then just follow the guide after the erase. Hope that helps.
This message has been edited since posting. Last time this message was edited on 24. September 2009 @ 04:34
|
|
pornzi
Junior Member
|
24. September 2009 @ 04:46 |
Link to this message
|
|
chur hincey
I took screen shots the whole way through procedure but will try that, will post if i getit going. . . .
|
|
tinker197
Newbie
|
24. September 2009 @ 15:29 |
Link to this message
|
@Hincey thanks for your help
turns out my problem was related to my onboard sata ports nforce even tho it found my drive in jungle flasher i couldnt get it to work gonna have to buy a via card
|
|
OmicronBP
Newbie
|
25. September 2009 @ 08:03 |
Link to this message
|
leerage:
First of all, thanks for taking the time to make tutorials like this. People like yourself make this whole process easier for average xbox modders like myself.
Everything I have read everywhere else regarding the Lite-On drives tell me that I have to purchase a "probe" or a "spear" in order to mod the Lite-on drives. However, your tutorial clearly leaves this requirement out of the process.
Is the spear/probe required only for the 74850c Lite-on drives?
|
|
ADNUP
Junior Member
|
25. September 2009 @ 08:24 |
Link to this message
|
Help! Wifes gonna kill me ={
I screwed up, I think the xbox powered off in the middle, now I'm stuck with no drive. I found this tutorial, http://forums.afterdawn.com/thread_view.cfm/762847, is there a newer way?
Log report:
JungleFlasher 0.1.66 Beta
Session Started Fri Sep 25 07:52:43 2009
This is a 32 bit process running on a 32 bit CPU
PortIO is installed and running.
Found 2 I/O Ports.
Found 1 Com Ports.
Found 7 windows drives C: D: E: F: G: H: I:
Found 0 CD/DVD drives
Sending LO83info request to I/O port 0xB800
............
................
0000: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0010: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0020: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0030: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0060: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
LO83info extraction Failed!
Sending LO83info request to I/O port 0xB800
............
.
0000: 49 6E 20 44 65 64 69 63 - 61 74 69 6F 6E 20 54 6F In Dedication To
0010: 20 54 68 65 20 42 69 72 - 74 68 20 4F 66 20 4D 61 The Birth Of Ma
0020: 63 6B 61 79 20 4F 6E 20 - 46 65 62 72 75 61 72 79 ckay On February
0030: 20 54 77 65 6C 76 65 20 - 32 30 30 37 20 FF FF FF Twelve 2007 ...
0040: FF FF FF FF FF FF FF FF - FF FF FF FF FF FF FF FF ................
0050: 4D 49 4B 45 20 4C 4F 56 - 45 53 20 48 45 4C 45 4E MIKE LOVES HELEN
0060: DA 8F D3 A7 D6 1C 39 47 - 5E 34 75 8F CD 32 45 2C ......9G^4u..2E,
................ Extract no.2 matches
0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS
0010: 44 47 2D 31 36 44 32 53 - 20 20 20 20 20 20 20 20 DG-16D2S
0020: 38 33 38 35 30 43 41 30 - 41 32 44 36 30 39 43 47 83850CA0A2D609CG
0030: 39 32 38 38 30 39 30 30 - 30 37 4E 20 20 20 00 00 9288090007N ..
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
Inquiry String saved to I:\XBOX360\Chis B\Inquiry.bin
0000: C0 85 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0010: 00 00 00 00 44 36 30 39 - 43 47 39 32 38 38 30 39 ....D609CG928809
0020: 30 30 30 37 4E 20 20 20 - 00 00 00 00 00 00 33 38 0007N ......38
0030: 35 38 43 30 20 20 4C 50 - 53 44 20 20 20 20 47 44 58C0 LPSD GD
0040: 31 2D 44 36 53 32 20 20 - 20 20 20 20 20 20 20 20 1-D6S2
0050: 20 20 20 20 20 20 20 20 - 20 20 20 20 20 20 00 00 ..
0060: 00 00 00 0B 00 00 00 04 - 00 02 06 00 00 00 00 00 ................
0070: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0080: 03 00 78 00 78 00 E3 00 - 78 00 00 00 00 00 00 00 ..x.x...x.......
0090: 00 00 00 00 00 00 00 00 - 02 02 00 00 68 00 00 00 ............h...
00A0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00B0: 20 20 00 00 ..
Identify String saved to I:\XBOX360\Chis B\Identify.bin
0000: 44 36 30 39 43 47 39 32 - 38 38 30 39 30 30 30 37 D609CG9288090007
0010: 4E 20 20 20 FF FF FF FF - 39 46 32 35 30 38 36 33 N ....9F250863
0020: 31 36 45 33 31 34 58 58 - 41 30 FF FF 53 34 50 39 16E314XXA0..S4P9
0030: 37 30 33 30 30 30 30 30 - 31 36 32 37 38 32 00 00 70300000162782..
0040: FF FF FF FF FF FF FF FF - FF FF FF FF 41 32 FF FF ............A2..
Extracted drive key F1******************************
Dummy.bin file saved to I:\XBOX360\Chis B\Dummy.bin
Loading DVDkey source file
Inquiry string found
Identify string found
DVD key found @ 0xA030 key is F1******************************
Firmware is a Lite-On Dummy OSIG:
Firmware type is: LO83info Extract
Auto-Loading target file C:\Documents and Settings\Owner\Desktop\JungleFlasher v0.1.66 Beta
(49)\firmware\ix16-liteon838.bin
Target File MD5 hash is: bc******************************
Genuine Lite-On 83850c iXtreme 1.6
Inquiry area found
Current DVD key is 55AA55AA55AA55AA55AA55AA55AA55AA
Firmware is a Lite-On encrypted iXtreme OSIG: PLDS DG-16D2S 8385
Firmware type is: iXtreme v1.60-12X-FINAL-DG-16D2S
DVD Key copied to target
Inquiry string copied from Source to Target
Identify string copied from Source to Target
Serial strings copied from Source to Target
Key added to database
Sending Lite-On-Erase request to port 0xB800
..............
Drive returned Status 0xD0
....................
Device Intro failed!
No Drive Detected! LO83info extraction aborted!
Sending Lite-On-Erase request to port 0xB800
..............
Drive returned Status 0x80
....................
Device Intro failed!
Sending Lite-On-Erase request to port 0xB800
..............
Drive returned Status 0x80
....................
Device Intro failed!
Sending Vendor Intro to port 0xB800
Status 0x80
Re-sending Vendor Intro:
............................................................................................
............................................................................................
............................................................................................
............................................................................................
.............................
Device Intro failed!
Samsung LN52A650
Yamaha 5.1
PS3 320gb
Wii Xbox 360 PSP NDS GC
|
AfterDawn Addict
2 product reviews
|
25. September 2009 @ 08:30 |
Link to this message
|
ADNUP, as long as you got a good DVDkey, you are fine. Disconnect the Lite-ON drive and shut down JF. Connect the Lite-ON to a different SATA port and start up JF again. The Lite-ON will be undetected because it has no firmware on it. What you need to do is select the I/O port that the Lite-ON is on. Re-send the Lite-ON erase and power cycle when prompted (power cycle = disconnect DVD drive power for 1 second and plug back in. Be careful as you are dealing with power).
|
|
ADNUP
Junior Member
|
25. September 2009 @ 08:54 |
Link to this message
|
I have the Dummy, Inquiry & Identify....
OMG thanks for such a quick answer!!
Samsung LN52A650
Yamaha 5.1
PS3 320gb
Wii Xbox 360 PSP NDS GC
|
|
ADNUP
Junior Member
|
25. September 2009 @ 08:55 |
Link to this message
|
Originally posted by ADNUP:
I have the Dummy, Inquiry & Identify....
OMG thanks for such a quick answer!!
Oh yeah and a GOOd Key, sorry I'm panicing!
Samsung LN52A650
Yamaha 5.1
PS3 320gb
Wii Xbox 360 PSP NDS GC
|
|
ADNUP
Junior Member
|
25. September 2009 @ 09:00 |
Link to this message
|
Just to be sure, when you say "disconnect DVD drive power for 1 second and plug back in" its ok to power off the xbox, right? I dont have a connectivity kit
Samsung LN52A650
Yamaha 5.1
PS3 320gb
Wii Xbox 360 PSP NDS GC
|
AfterDawn Addict
2 product reviews
|
25. September 2009 @ 09:03 |
Link to this message
|
Originally posted by ADNUP:
Just to be sure, when you say "disconnect DVD drive power for 1 second and plug back in" its ok to power off the xbox, right? I dont have a connectivity kit
You don't want to power off the XBOX 360. You want to disconnect the power cable from the DVD drive for 1 second and then reconnect.
|
|
ADNUP
Junior Member
|
25. September 2009 @ 09:36 |
Link to this message
|
|
THANK YOU!! THANK YOU!! THANK YOU!!
It worked!!!!!!, where do I send my paypal donations to?
Thanks again, your guide is awsome!!!
Samsung LN52A650
Yamaha 5.1
PS3 320gb
Wii Xbox 360 PSP NDS GC
|
|
ADNUP
Junior Member
|
25. September 2009 @ 09:38 |
Link to this message
|
|
LMAO!1
What the heck is this, the previous owner????
"0050: 4D 49 4B 45 20 4C 4F 56 - 45 53 20 48 45 4C 45 4E MIKE LOVES HELEN "
Samsung LN52A650
Yamaha 5.1
PS3 320gb
Wii Xbox 360 PSP NDS GC
|
AfterDawn Addict
2 product reviews
|
25. September 2009 @ 09:54 |
Link to this message
|
Originally posted by ADNUP:
THANK YOU!! THANK YOU!! THANK YOU!!
It worked!!!!!!, where do I send my paypal donations to?
Thanks again, your guide is awsome!!!
I'm glad you got it working.
Originally posted by ADNUP:
LMAO!1
What the heck is this, the previous owner????
"0050: 4D 49 4B 45 20 4C 4F 56 - 45 53 20 48 45 4C 45 4E MIKE LOVES HELEN "
That is normal in the firmware.
|
|
OmicronBP
Newbie
|
25. September 2009 @ 10:30 |
Link to this message
|
|
leerage, I don't want to spam, but you may not have seen my question above regarding probe/spear. Thanks!
|
AfterDawn Addict
2 product reviews
|
25. September 2009 @ 10:40 |
Link to this message
|
Originally posted by OmicronBP:
leerage, I don't want to spam, but you may not have seen my question above regarding probe/spear. Thanks!
Sorry about that OmicronBP. If you have a stock 74850C Lite-ON, it requires the probe/spear. If you have the 83850C Lite-ON, you do not need the probe/spear. With the 83850C, you can dump the encrypted DVDkey via SATA.
|
Newbie
|
25. September 2009 @ 10:56 |
Link to this message
|
Hey great tutorial, everything went relatively smooth for me up until the final step, 'writing the firmware to the drive'. JF Hangs shortly after the process begins and if left long enough the JF window goes white, any easy remedy for this?, or alternatively is it possible to use dosflash in conjunction with the dummy.bin, identify.bin and inquiry.bin i have retrieved to write the firmware? thanks
JF freezes up at this step, sometimes i get a few more dots after "writing blank 0:"
|
AfterDawn Addict
2 product reviews
|
25. September 2009 @ 11:00 |
Link to this message
|
Are you using the VIA SATA card? If so, try removing the driver:
1. Disable VIA card in Device Manager.
2. Go to C:\WINDOWS\System32\drivers and remove "viamraid.sys" or "vsmraid.sys".
3. Re-enable VIA card in Device Manager.
4. Re-Boot PC.
If you aren't using a VIA card, just try a different SATA port. You will have to switch the I/O port in the MTKFlash tab once you have physically change the SATA port.
Note: Now that you have erased the firmware, you drive will no longer eject and will not be detected by JF. Just remember what I/O port your Lite-ON is connected to and resend the Lite-ON erase.
|
Newbie
|
25. September 2009 @ 11:12 |
Link to this message
|
Originally posted by leerage:
Are you using the VIA SATA card? If so, try removing the driver:
1. Disable VIA card in Device Manager.
2. Go to C:\WINDOWS\System32\drivers and remove "viamraid.sys" or "vsmraid.sys".
3. Re-enable VIA card in Device Manager.
4. Re-Boot PC.
If you aren't using a VIA card, just try a different SATA port. You will have to switch the I/O port in the MTKFlash tab once you have physically change the SATA port.
Note: Now that you have erased the firmware, you drive will no longer eject and will not be detected by JF. Just remember what I/O port your Lite-ON is connected to and resend the Lite-ON erase.
Thanks for the help, i am indeed using the via card (VT6421A)when i originally went to remove the drivers i found neither "viamraid.sys" or "vsmraid.sys" did i do something wrong during that step? should they be there?
i was contemplating just creating a fresh xp partition on my hd just for flashing the DVD drive would this remove any driver related issues, or any other issues? thanks again for the help
|
AfterDawn Addict
2 product reviews
|
25. September 2009 @ 11:40 |
Link to this message
|
Originally posted by seannco:
Originally posted by leerage:
Are you using the VIA SATA card? If so, try removing the driver:
1. Disable VIA card in Device Manager.
2. Go to C:\WINDOWS\System32\drivers and remove "viamraid.sys" or "vsmraid.sys".
3. Re-enable VIA card in Device Manager.
4. Re-Boot PC.
If you aren't using a VIA card, just try a different SATA port. You will have to switch the I/O port in the MTKFlash tab once you have physically change the SATA port.
Note: Now that you have erased the firmware, you drive will no longer eject and will not be detected by JF. Just remember what I/O port your Lite-ON is connected to and resend the Lite-ON erase.
Thanks for the help, i am indeed using the via card (VT6421A)when i originally went to remove the drivers i found neither "viamraid.sys" or "vsmraid.sys" did i do something wrong during that step? should they be there?
i was contemplating just creating a fresh xp partition on my hd just for flashing the DVD drive would this remove any driver related issues, or any other issues? thanks again for the help
You could try that or a quick fix would just be to boot DosFlash v1.8 on a USB drive. In my signature is how to make a bootable USB drive. Just format the USB drive as FAT32 and tell the program where to navigate to the boot files to copy them over. Then put your custom Lite-ON firmware on the USB drive along with iXtreme 1.6.
Boot to the USB and type:
dosflash.exe
It should recognize your Lite-ON by it's flash chip, either Winbond/NEX or MXIC. Select the corresponding number to the flash chip. Type W for write and then type the name of your custom firmware bin.
Note: with DOS, there is character limitations. I suggest you name your custom firmware bin like lite16.bin
|
|
bludd
Member
|
25. September 2009 @ 13:12 |
Link to this message
|
Originally posted by leerage:
Originally posted by ADNUP:
Just to be sure, when you say "disconnect DVD drive power for 1 second and plug back in" its ok to power off the xbox, right? I dont have a connectivity kit
You don't want to power off the XBOX 360. You want to disconnect the power cable from the DVD drive for 1 second and then reconnect.
Just to make sure, when I am powering the drive on or cutting power, all I will be doing is just disconnecting the power plug from the lite on drive and have the 360 fully powered.
Does the 360 have to be at any particular bootup screen or is just turning it on and leaving it fine?
Thanks in advance and sorry for the novice question. I just want to make sure I clearly understand all the steps before attempting a go. =)
|
AfterDawn Addict
2 product reviews
|
25. September 2009 @ 14:16 |
Link to this message
|
Originally posted by bludd:
Originally posted by leerage:
Originally posted by ADNUP:
Just to be sure, when you say "disconnect DVD drive power for 1 second and plug back in" its ok to power off the xbox, right? I dont have a connectivity kit
You don't want to power off the XBOX 360. You want to disconnect the power cable from the DVD drive for 1 second and then reconnect.
Just to make sure, when I am powering the drive on or cutting power, all I will be doing is just disconnecting the power plug from the lite on drive and have the 360 fully powered.
Does the 360 have to be at any particular bootup screen or is just turning it on and leaving it fine?
Thanks in advance and sorry for the novice question. I just want to make sure I clearly understand all the steps before attempting a go. =)
You can do it when it is at the dash board. Just make sure you don't plug the cable in upside down or anything like that.
|
|
Melux
Newbie
|
25. September 2009 @ 16:58 |
Link to this message
|
Same problem here
Quote:
Sending Lite-On-Erase request to port 0xB800
..............
Drive returned Status 0x80
....................
Device Intro failed!
(and it all started from xbox shutting down itself)
Resended erase command atleast 20times (also did that power cycle thing) , even tryed different sata ports (changed ports from jungleflasher too) and still nothing.
2 other non-liteon drives successuffly flashed with my sata.
|
AfterDawn Addict
2 product reviews
|
25. September 2009 @ 17:19 |
Link to this message
|
Originally posted by Melux:
Same problem here
Quote:
Sending Lite-On-Erase request to port 0xB800
..............
Drive returned Status 0x80
....................
Device Intro failed!
(and it all started from xbox shutting down itself)
Resended erase command atleast 20times (also did that power cycle thing) , even tryed different sata ports (changed ports from jungleflasher too) and still nothing.
2 other non-liteon drives successuffly flashed with my sata.
Make sure you have the proper I/O port selected and click Intro/Device ID.
|
|
Advertisement
|
|
|
|
Melux
Newbie
|
25. September 2009 @ 17:30 |
Link to this message
|
|
|
