Originally posted by ReplayL:

---

Gman,

Cheers for the swift shout back, can i just ask, i will be copying from box 1 which is the new box i received today, it has no channels or Favs on it or anything, should i add all them first or will it be ok, as its not channels and favs im looking for, just the actual firmware.

Thanx....

---

Originally posted by ReplayL:

---

I dont need software to flash it if im just going to clone the box from another box do i with the null cable??

Also, when i scan for channels i get them all in 56 seconds, i used to be a clown and wait full 20-25 mins for full channel scan but get the same as i do if i wait 56 secs so i just use that way instead, much easier.

---

Originally posted by ReplayL:

---

Thanx for that.

as for the 56 sec scan, pretty straight forward, dunno where you are or if it will work but my box starts scanning in the auto scan from about 162.00 mhz but it doesnt actually pick up channels until it reaches apprx. 339.5 or something, and even then when you leave it for 25 mins it picks up lots of channels twice and your no better off so haveing tried leaving the scan for over an hour and stopping it after 56 secs i found i get exactly the same amount of channels so i simply set the start frequency in auto search (up the top) to 338.6 and then press start, within 5 seconds the channels start to come in and being as sad as i am i timed it one night and it took 56 seconds to get every channel available.

But like i said i dunno where you are or if it will work for you, hopefully it does.

Im in dublin.

Thanx again for the heads up on the cloning, hopefully all goes well and wont need to hassle the forum again.

Cheers.....

---

Originally posted by ReplayL:

---

Afternoon Lads,

I just received a Replay Lite from a supplier containing the most up to date firmware available so im hoping tonight to "clone" my 2 existing boxes off the new one to upgrade the firmware.

Can anybody tell me how exactly to do this i.e do i have to have both boxes powered up when connected to the null modem cable or just the new one etc etc.

Step by step if at all possible as im new to this.

Thanx in advance for your help.

---

Originally posted by ReplayL:

---

CAUTION
Before you clone from the new box ensure that it actually has bootloader firmware on it. Replay Lite boxes are sold with Satellite software on them, not Cable box software. If the box has the latest cable software on it, it would have all the channels. Get this box working first b4 you clone from it or you will be left with all 3 boxes in with no cable software on them and will have to use a very early version flash to get them back as 7.50/7.52 are only updates and do not contain a bootloader.

Proceed with caution!

---

Originally posted by leespiro:

---

hi guys and girls, can somebody please tell how to get my channels unscrambled on the replay lite firmwire 7.44 i had it working before but my dad switched off the box from the mains and now it dont work anybody know how to get it to work again thanks spiro

---

Originally posted by ReplayL:

---

Lads, does anybody know if the Replay Lite will work (pick up all channels) in the Meath area close to Kinnegad / Clonard / Enfield on Chorus newtork as opposed to NTL?

If so is there anything special ya need to do to the box or will the normal firmware work.

Cheers,

---

Originally posted by leespiro:

---

hi when i put the TW codes in they dont stay in there what am i doing wrong

---

Originally posted by debic:

---

hi all
Is anyone having this problem and can help me solve it. I updated 2 of my friends boxes with the 752 software. Working fine to start with even after code change last wk but now they're getting 1800 scrambled. Can't understand why seeing as they must have autoupdated themselves when the codes changed but now they're not bringing anything in. Has anyone had this happen or has any ideas.
thanks

---

Originally posted by woodyttc:

---

hi can anyone send me the firmware 752 for my replay lite my email is woodhead.alan@gmail.com any help would be great thanks in advance

---