Originally posted by sc0user:

---

Hi Anto I was but am now off to bed but I am always around for you ;)

---

Originally posted by karljd:

---

Originally posted by sc0user:

---

Hi Anto I was but am now off to bed but I am always around for you ;)

---

ah you never lost it sc0ucer you aul smoothy!

---

Originally posted by CyborCop:

---

Hi people only new here have a bit of knowledge on the starviews and the eurovox hope you dont mind me joining in on your forum thanks

---

Originally posted by daylitex:

---

Hi guys
does anyone know how to sort this problem on a genuine s/v 1 box.

personally i have loaded firmware many times into these box's

now i have come across a box that normally when it starts up you first get the green dashes across the screen the it goes to on. at this point you load the firmware.

what the problem is this box starts with the dashes and then freezes before the ON comes up unabling me to put the firmware into the box.
If I connect the box to a tv all that comes up on screen is THE BOX

has anyone come across this problem or does anyone know how to rectify the problem. I would appreciate any help.

---

Originally posted by Celtic71:

---

You have updated with the wrong version , you will need either CryptStarv2.57 for Clones or CryptStarv4.00 for genuine Starvi*w 1

---

Originally posted by daylitex:

---

Originally posted by Celtic71:

---

You have updated with the wrong version , you will need either CryptStarv2.57 for Clones or CryptStarv4.00 for genuine Starvi*w 1

---

thanks but it has been flashed with the correct firmware for the genuine s/v as others i have done

when you start up this box i do get a row of flashing green dashes then it freezes for some unknown reason and does not go to ON

---

Originally posted by karljd:

---

Originally posted by daylitex:

---

Originally posted by Celtic71:

---

You have updated with the wrong version , you will need either CryptStarv2.57 for Clones or CryptStarv4.00 for genuine Starvi*w 1

---

thanks but it has been flashed with the correct firmware for the genuine s/v as others i have done

when you start up this box i do get a row of flashing green dashes then it freezes for some unknown reason and does not go to ON

---

if the box logo comes up on a genuine starview 1 you have flashed the box with the wrong firmware

---

Originally posted by anto1969:

---

daylitex maybe you could try the bad flash method you will find it at the link below under fergs name might help don,t know. I read some people who used it had to keep trying maybe 15 times to get the box flashed.
hope it helps.

http://forums.afterdawn.com/thread_view.cfm/531363

also look at this thread seems a few people mixed up firmware might find your answer here

http://forums.afterdawn.com/thread_view.cfm/648148

---

Originally posted by geraldor4:

---

Hey anto, sorry to keep at you, but do you have any idea how to check if it's a clone or a genuine???

---