|
KRYPTVIEW A750
|
|
Senior Member
|
28. April 2009 @ 12:23 |
Link to this message
|
Originally posted by fergusrb:
Originally posted by reswob:
A friend of mine recently bought the arnet,it,s up and running since last friday.He is haveing a problem with the picture,sometimes it freezes.It also vibrates very rapidly[up and down]quiet a lot.He has checked all leads and connections,there are no splitters involved.He lives in dublin.Ive checked other threads and cant find any solutions to this problem.many thanks
get them to check the settings in the menu it should be on pal and also try changing the setting from cvbs to rgb or vice versa
also make sure he is not using a splitter kit on his incoming connection as if the signal is week this will happen
also that he is not using another connection from the loop out on the bottom as that is not another connection to feed another tv
Did a factory reset then auto search as kwall99 said,no joy.did as you asked above fergusrb still no joy.Went through all the above procedures again and still no luck.Rechecked all cables every thing ok.decided to try one last time,did factory reset and autoscan and hey PRESTO! IT WORKED,A little patients some times goes a longgggggggg way.Thanks fergus and kwall99
|
|
Advertisement
|
|
|
|
|
StarBingo
Member
|
28. April 2009 @ 12:49 |
Link to this message
|
anyone else who switched to kryptview from eurovox miss knowing whats currently on the 15 stations each page you've sorted when you press OK? amongst other GUI differences..
knew i'd find it hard changing from the eurovox. may have to connect both devices n only switch to KV for movies/sport. which is inconvenient but i really miss the eurovox interface that much!
|
|
dunned
Suspended due to non-functional email address
|
28. April 2009 @ 13:46 |
Link to this message
|
|
Could someone please pm me with a supplier in dublin. Tnks in advance
|
|
erockluap
Newbie
|
28. April 2009 @ 13:52 |
Link to this message
|
Originally posted by SG8:
You might have this problem here:
http://forums.afterdawn.com/thread_view.cfm/764903
I have come across 2 of these so far.
Originally posted by erockluap:
Originally posted by erockluap:
Originally posted by erockluap:
Originally posted by fergusrb:
Originally posted by erockluap:
Hi all got a kryptview a750 tried everything i found on all forums but cannott get box to flash i tried two different pcs different rs 232 null cables every fix i could find but keep getting download not requested Ive tried all advise everything looks fine with regard to ports i have comm port which worked for my starview and biught a usb to null but nothing works i have come across a thread that an avg anti virus update will not allow the ports to flash boxes any ideas or fixes.???
THX in advance erockluap.
turn off the box at the back get the loader and the file ready press download and the switch the box on at the back thats it and let it flash
Tried it 50 times .???
THX
honestly ferguserb Ive done the lot i have flashed boxes bfore but im convinced its avg virus guard blocking the comm ports any ideas how to correct.?
goin to bed im up at 5am talk tomoro if ure avilable.
HI got sorted by flashing from a friends box I am still in dark regarding why the boxes will not flash from my pcs but thx all
keep up the good work.
regards
|
|
fergusrb
Suspended permanently
|
28. April 2009 @ 17:58 |
Link to this message
|
Originally posted by pdonovan:
I'm getting requests from Ch*rus/nthell to insert my new card and text back 'done'. i just installed the kryptview on the mmds system. Should i put the card in the old nthell box or will it effect me at all?
they are just making sure you have your card thats all
|
|
gizzy2511
Newbie
|
28. April 2009 @ 18:16 |
Link to this message
|
|
I am in Dublin NTL and just got my new Kryptview Box.
With some help I amready to go but when I did a channel search I only ended up getting about eight channels.
Any help would be greatly appreciated,
Gizzy.
Gizzy2511
|
Senior Member
|
28. April 2009 @ 18:21 |
Link to this message
|
Originally posted by gizzy2511:
I am in Dublin NTL and just got my new Kryptview Box.
With some help I amready to go but when I did a channel search I only ended up getting about eight channels.
Any help would be greatly appreciated,
Gizzy.
only found about 8 or only about 8 are decrypted?
factory reset, scan again and make sure you pick the ntl legacy option.
If your on NTL mmds you have to manually scan each transponder
PLEASE DONT PM ME FOR KEYS!
|
|
fergusrb
Suspended permanently
|
28. April 2009 @ 18:27 |
Link to this message
|
Originally posted by gizzy2511:
I am in Dublin NTL and just got my new Kryptview Box.
With some help I amready to go but when I did a channel search I only ended up getting about eight channels.
Any help would be greatly appreciated,
Gizzy.
when scanning make sure you put your provider on top next option down is set to network
and only then press the GREEN BUTTON THEN
next window select legacy and press ok
thats it then and let it scan away
|
Senior Member
|
28. April 2009 @ 18:27 |
Link to this message
|
Just In Case....some info that might come in handy.
Kryptview Manual Key Entry.
To manually enter keys if they roll and the box doesn?t update.
Press 6001 on your keypad while watching a TV channel.
Key table appears.
Scroll to your provider THEN across to the related keys.
Press OK to edit the keys?.use the little arrow on the screen to move to the right of 00,
enter new keys and save.
Do the same on the second line use the little arrow on the screen to move to the right of 01,
enter new keys and save
Exit button to TV.
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
|
|
fergusrb
Suspended permanently
|
28. April 2009 @ 18:28 |
Link to this message
|
|
you dont have that option any more as they no longer use codes or keys in ireland on n** and shortly chor**
This message has been edited since posting. Last time this message was edited on 28. April 2009 @ 18:29
|
Senior Member
|
28. April 2009 @ 18:33 |
Link to this message
|
Originally posted by fergusrb:
you dont have that option any more as they no longer use codes or keys in ireland on n** and shortly chor**
They can always revert back to it Fergs...ya never know with them Nhellers LOL
It might also be useful info for our British members.
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
|
|
fergusrb
Suspended permanently
|
28. April 2009 @ 18:34 |
Link to this message
|
Originally posted by BRIAN1956:
Originally posted by fergusrb:
you dont have that option any more as they no longer use codes or keys in ireland on n** and shortly chor**
They can always revert back to it Fergs...ya never know with them Nhellers LOL
It might also be useful info for our British members.
they cant revert back to manually key entry as the numbers are to long now
|
Senior Member
|
28. April 2009 @ 18:38 |
Link to this message
|
|
Is it the same system in Britain?
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
|
|
fergusrb
Suspended permanently
|
28. April 2009 @ 18:40 |
Link to this message
|
|
no they are still N1
we are no N2 here so thats why no more manual key entry as they dont show if you look at the table you will see ke** but false ones so they dont work that way now
|
Senior Member
|
28. April 2009 @ 18:44 |
Link to this message
|
|
Cheers Fergs,
Thanks for the info.
Take care M8ty
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
|
|
fergusrb
Suspended permanently
|
28. April 2009 @ 18:45 |
Link to this message
|
|
not a bother take care good jokes by the way lol
|
|
dunned
Suspended due to non-functional email address
|
28. April 2009 @ 18:46 |
Link to this message
|
|
Fergus could you pm me with the kryptview supplier details in dublin
|
|
fergusrb
Suspended permanently
|
28. April 2009 @ 18:48 |
Link to this message
|
Originally posted by dunned:
Fergus could you pm me with the kryptview supplier details in dublin
sorted mate check your mail
|
|
dunned
Suspended due to non-functional email address
|
28. April 2009 @ 18:53 |
Link to this message
|
|
just did thanks a mil
|
|
whistle76
Junior Member
|
29. April 2009 @ 11:52 |
Link to this message
|
|
Fergus could you pm the kryptview supplier too please..thanks in advance
|
|
gizzy2511
Newbie
|
29. April 2009 @ 13:04 |
Link to this message
|
|
Got it sorted this morning!
Many thanks to all who assisted me just delighted and will be able to watch my matches again at the weekend. Thank you all.
Gizzy
Gizzy2511
|
Junior Member
|
29. April 2009 @ 13:29 |
Link to this message
|
Give it a flash Jack. <- Get it???
This message has been edited since posting. Last time this message was edited on 29. April 2009 @ 13:30
|
Senior Member
|
29. April 2009 @ 13:42 |
Link to this message
|
Whatever you say, say nothing when you talk about you know what for if you know who might hear you, you know what youll get. Youll be sent off to you know where for you would not know how long. Maybe I could search through the threads so you dont have to ??
This message has been edited since posting. Last time this message was edited on 29. April 2009 @ 13:44
|
Newbie
|
29. April 2009 @ 14:34 |
Link to this message
|
Originally posted by hennessy6:
Originally posted by BenEadir:
Fergus, is there a standard cable code/name for the USB to Com cable and/or a link to where it can be purchased in Ireland or the UK? Is this the right cable? http://www.cables.ie/computer-cables/usb.../quote]
you can buy them in maplins they have shops around ireland
|
|
Advertisement
|
|
|
|
bunners
Newbie
|
29. April 2009 @ 14:39 |
Link to this message
|
Originally posted by barts2:
this 1 mate Kryptview_19032009.bin im in waterford on ntl works 100% all channels good little box
|
