[Guide]How to Play AR Max On to Swap Magic
|
|
Senior Member
|
21. December 2005 @ 06:35 |
Link to this message
|
Where do i download the save
PS2 Slimline + Swap Magic + Fan
PS3 60gb Version 1.90
PSP 3.52 M33 EUR Black Version + Logitech Hard Case + Logitech 3 Sound Speakers + 2gb Sony Memory Stick
Nintendo Wii + 3 Wii&Nunchuck Controllers
NDS Original + M3 Simply + 1gb Kingston MicroSD
NDS Lite + M3 Simply + 2gb Sandisk MicroSD
|
Advertisement
|
  |
|
cblue72
Suspended due to non-functional email address
|
22. December 2005 @ 01:06 |
Link to this message
|
3dluis
whill this methed work on hdadvance.
thanks to all past present and tommerow!!
|
Senior Member
|
22. December 2005 @ 01:20 |
Link to this message
|
Im not sure. Just put your action replay and put it on the harddrive. Than Load it up from harddrive using hd dvance. Select the codes and press start, eject and put your hd advance in , than play the game with the cheats on and hopefully it should work
PS2 Slimline + Swap Magic + Fan
PS3 60gb Version 1.90
PSP 3.52 M33 EUR Black Version + Logitech Hard Case + Logitech 3 Sound Speakers + 2gb Sony Memory Stick
Nintendo Wii + 3 Wii&Nunchuck Controllers
NDS Original + M3 Simply + 1gb Kingston MicroSD
NDS Lite + M3 Simply + 2gb Sandisk MicroSD
|
cblue72
Suspended due to non-functional email address
|
22. December 2005 @ 01:52 |
Link to this message
|
3dluis
the reson I asked is becous i ar max but my ps2 has problems reading cheat device after a while and I try to downlad my ar but i can not get it to download with out errors and i try to make a dic of it but it will not read in hd advance onlike the original will but with errors so I download the same ar max online but I an not shour how to go about this. Iam using a no mode swop card on a v7 ps2 with hdadvance I know I can play back up and had now problem with this ex.
now
thanks
thanks to all past present and tommerow!!
|
Senior Member
|
22. December 2005 @ 04:03 |
Link to this message
|
I'm Really not sure because i have no expiereince with Harddrives w/ ps2's. Let alone working AR MAX on the Hard drive. So i can't help you im afraid. Sorry
PS2 Slimline + Swap Magic + Fan
PS3 60gb Version 1.90
PSP 3.52 M33 EUR Black Version + Logitech Hard Case + Logitech 3 Sound Speakers + 2gb Sony Memory Stick
Nintendo Wii + 3 Wii&Nunchuck Controllers
NDS Original + M3 Simply + 1gb Kingston MicroSD
NDS Lite + M3 Simply + 2gb Sandisk MicroSD
|
cblue72
Suspended due to non-functional email address
|
22. December 2005 @ 09:50 |
Link to this message
|
thaks bud I will keep looking by the way do you know if there is a patch for this
thanks to all past present and tommerow!!
|
crakababy
Newbie
|
22. December 2005 @ 16:07 |
Link to this message
|
Why is it that it wont let me do this. I do everything correctly up to the point where I have to put the modified ARMAX files into cdvdgen. I put all the files and make it look exactly like how you have it in the picture. But whenever I click export iml file, it says " too short location length : less than 600 000 sector" Why is ti saying this and how can I make it stop?
famous quotes.... well not really
"When life givues you lemons..... shut up and eat your damn lemons"
"We all have the right to be stupid, but you're just abusing it!"
|
playguy
Member
|
23. December 2005 @ 08:02 |
Link to this message
|
You don't need the CD DVD gen.Just use Nero to burn the files.I did it and it works ok.Just remeber, put the ar max files and the cd loader files all in the root directory of the disc.Of course, the content the folders that came originnaly with CD loader and AR MAX can't be put there.
Sorry if i messed up lol.
Signature failed to load ---> Error 69
|
crakababy
Newbie
|
23. December 2005 @ 08:35 |
Link to this message
|
What do you mean by that? Cus I just put all the stuff that was in the edited ARMAX folder and put it into Nero and burned both a cd and dvd but neither of them work. Do i HAVE to have swap magic for this to work? Cus If i do I might as well stop this now lol. All I have is cogswap loader and cd loader(which I dont know how to use).
famous quotes.... well not really
"When life givues you lemons..... shut up and eat your damn lemons"
"We all have the right to be stupid, but you're just abusing it!"
|
playguy
Member
|
23. December 2005 @ 10:11 |
Link to this message
|
do you have the original AR MAX?
I know what is your problem, but you need something to take the system configuration file out of the memory card to edit in your pc, or you need to make a new exploit.Cogswap loader won't play that cd, you will need to use Launchelf 3.41 to boot that cd, but you need it to make it the boot file on the exploit file of the memory card.
You can find launchelf 3.41 in www.exploitstation.com.
Signature failed to load ---> Error 69
|
crakababy
Newbie
|
26. December 2005 @ 12:06 |
Link to this message
|
I do have the original ARMAX disc. I do not have ARMAX EVO though (atleast I dont think I do. I have the usb stick). The ARMAX disc is a CD for me so I dont know why hes saying o use DVD Decrypter. Is there anything like DVD Decrypter for CDs. As I said before too, is it absolutely necessary that I have swap magic.
famous quotes.... well not really
"When life givues you lemons..... shut up and eat your damn lemons"
"We all have the right to be stupid, but you're just abusing it!"
|
pkdorx3
Junior Member
|
27. December 2005 @ 16:52 |
Link to this message
|
WTF!!! I do everything down to the letter I tried burnin the iso Both with nero and with DVD decrypter (And I also got the (60000000 sector error) with cd dvd gen so I even tried to burni it on to a CD insted of a DVD but When I use my SM3.6 to boot it It gives me a "Not a Valid PS2 Disck" error every time I tryied geting the files from cd loader 7 v5.2 and I alway get the same erroe . I am tired of making freaking coasters. can sombody help please??? Is there an updated guide that gets it right?? Or wth am i doing wrong??? please help
This message has been edited since posting. Last time this message was edited on 28. December 2005 @ 14:30
|
playguy
Member
|
28. December 2005 @ 01:21 |
Link to this message
|
Ok, what you gotta do is this:
1-Get your AR MAX EVO cd, and copy the files inside to a folder.I think there will be a problem while copying the BIG.dat 1 or 2, i'm not sure, but get worried with that, that files aren't going to be needed (Cdloader has them)
2-Now download this: http://www.swapmagicfix.com/CDLoader_V7_BETA_5.2.zip And extract the files to the same folder of AR MAX (overwrite the system.cnf)
Ok, you got it all there, now, you see the msystem.cnf?(msystem, it's not a typo)Open the notepad, and open that file.
You will see this:
\MENU 1\cdrom0:\PS2LOAD.ELF;1
\MENU 2\cdrom0:\PS2LOAD.ELF;1
\MENU 3\cdrom0:\PS2LOAD.ELF;1
\MENU 4\cdrom0:\PS2LOAD.ELF;1
\MENU 5\cdrom0:\PS2LOAD.ELF;1
\MENU 6\cdrom0:\PS2LOAD.ELF;1
\MENU 7\cdrom0:\PS2LOAD.ELF;1
\MENU 8\cdrom0:\PS2LOAD.ELF;1
\MENU 9\cdrom0:\PS2LOAD.ELF;1
\MENU 10\cdrom0:\PS2LOAD.ELF;1
Now, you see the sles, or slus file from ar max?Substitute the first line with this:
\AR MAX EVO\cdrom0:\SLES_500.09;1 (In my case, i'm european)
\MENU 2\cdrom0:\PS2LOAD.ELF;1
\MENU 3\cdrom0:\PS2LOAD.ELF;1
\MENU 4\cdrom0:\PS2LOAD.ELF;1
\MENU 5\cdrom0:\PS2LOAD.ELF;1
\MENU 6\cdrom0:\PS2LOAD.ELF;1
\MENU 7\cdrom0:\PS2LOAD.ELF;1
\MENU 8\cdrom0:\PS2LOAD.ELF;1
\MENU 9\cdrom0:\PS2LOAD.ELF;1
\MENU 10\cdrom0:\PS2LOAD.ELF;1
If you're american, you must have a slus file, just substitute the letters and numbers, but put them in the same form.
Now, everythings set up, just burn that on a cd.
Now, go to exploitstation.com and look for launchelf 1.41 on elf library.
What you gotta do now is, with a help of AR MAX EVO, copy your system configuration file to your pc(the one that has the exploit), and now, using PS2 save builder, delete the boot.elf that is there, and rename the launchelf.elf to boot.elf, and add it to the save file.If you use cogswaploader to boot games, you can also download it from exploitstation.com and put it there, without renaming it.Now, get it back to the memory card.
Boot the PSX game.You will see a blue screen.Don't be scared, it's super simple to use, and you will see how useful launchelf is.Anyway, press select to go to the config.Now you will see the buttons of the playstation.This is for key binding.Go to any key, and press O.You will see MC0:,MC1:,HDD,CDFS,MASS, and MISC.Go to MISC.See ps2 DISC?Press O on it.It's now binded to your choosen key.Now, put a cd rom ps2 game(the blue ones) and wait untill STOP DISC comes at the top of the window.Now, you can do the swap thing, and put the burned CD loader with ar max.Trust me you can.Now, press the key to boot PS2 disc, and if everything went well, it will boot the cd.
A black screen with white letters will appear.Put the Reset IOP to always.This is important and AR MAX won't work if you don't do it.
Now, you will be taken to the normal cd loader screen.Just press X and you will see AR MAX EVO on the first line.Press X on it.It will boot AR MAX.It's a good idea to have a codelist on the memory card because for some reason it won't boot the one from the cd.Select the game, codes and press start.start the game.Don't worry about not changing game, just start the game with the CDloader armax cd inside.It will take you back to the cd loader screen.Now, just take the cd out, put a ps2 original dvd, press X, and do the swap when it tells you, and you're ready to roll.
Now, you have learned everything that you needed to use the program, but since you have a new program in hands and maybe you don't know how to use it, i'll give some tips.
It's a good idea to bind keys to the filebrowser that you saw on the misc section.It lets you view and copy the contents of the cd, to the memory card, between memory's, and even USB (mass).PS2 browser takes you back to the normal ps2 browser(the one of the ps2 main menu).If you have cogswaploader on the memorycard, you can bind a key to that too.
Ok, i think it is done, hope it works for you
Signature failed to load ---> Error 69
|
playguy
Member
|
28. December 2005 @ 01:21 |
Link to this message
|
Ups, sory for the double post...
Oh i remeber about something.If the system.cnf doesn't boot for some reason, you can always try to boot the ps2load.elf using the filebrowser on the cd.
Signature failed to load ---> Error 69
This message has been edited since posting. Last time this message was edited on 28. December 2005 @ 01:34
|
Senior Member
|
28. December 2005 @ 02:06 |
Link to this message
|
PLayguy, how do you UPDATE the code list for the back ups..
PS2 Slimline + Swap Magic + Fan
PS3 60gb Version 1.90
PSP 3.52 M33 EUR Black Version + Logitech Hard Case + Logitech 3 Sound Speakers + 2gb Sony Memory Stick
Nintendo Wii + 3 Wii&Nunchuck Controllers
NDS Original + M3 Simply + 1gb Kingston MicroSD
NDS Lite + M3 Simply + 2gb Sandisk MicroSD
|
playguy
Member
|
28. December 2005 @ 07:57 |
Link to this message
|
You want to Update the codelist on your memorycard, right?
So, do this.You must have the original AR MAX EVO and a pen drive to make this work.You must have a ar max settings file on the memory card, copy it to usb drive, and then to the pc.Open with PS2 save builder.Now, install this program:
http://www.mirality.co.nz/maxcode.php It's easy to use, just choose your region, download the codelist, and select the games that you have, includng the backups.This program is extremly useful, because you only have the codelist for the games you have, and not for all games, wich takes up a lot of space in the memorycard.Anyway, after making your own codelist, save it somewhere.Now, go back to ar max settings file.Go to add file, and add the codelist into the AR MAX save.Save it, and then copy it back to the memory card.It will work.
Now, everytime you want to update it, you must take off the save file, do another codelist, and do the same process, and copy it back to the memory.
Any questions, just ask.
Signature failed to load ---> Error 69
|
Senior Member
|
28. December 2005 @ 09:44 |
Link to this message
|
Bah, thanks but i finally got it to work, 2 days ago i had bought a router, Set it up and now my 2 pcs work online at same time. Set it up for my PS2 Slimline and all that, and now.. i can just download it.
It works for back ups and Originals
Too bad my original is too scratched now
PS2 Slimline + Swap Magic + Fan
PS3 60gb Version 1.90
PSP 3.52 M33 EUR Black Version + Logitech Hard Case + Logitech 3 Sound Speakers + 2gb Sony Memory Stick
Nintendo Wii + 3 Wii&Nunchuck Controllers
NDS Original + M3 Simply + 1gb Kingston MicroSD
NDS Lite + M3 Simply + 2gb Sandisk MicroSD
|
playguy
Member
|
28. December 2005 @ 10:56 |
Link to this message
|
Try working with launch elf.It let's you copy files between USB drives and Memory cards.Besides, it is really useful and recommended to everyone.
Signature failed to load ---> Error 69
|
piccas0
Newbie
|
31. December 2005 @ 05:54 |
Link to this message
|
hi, i have a similar problem.
my (original) AR Max Evo wont boot/load Backup games.
im not sure if this is AR's fault or my chips (Ripper 3.2u Firmw. 3.3)
do you know if this could be fixed when i create a cd using your tut. ?
(i just want to ask before wasteing a cd)
another question...
is there a way to include the new saves/codes in the cd bevore burning?
(would save some space on mc)
and your talking about a dvd above, my AR Max is A cd (At least Alcohol's drive info says so)
thanks for your time
|
playguy
Member
|
1. January 2006 @ 06:53 |
Link to this message
|
Yeah, it is going to work, just follow the instructions without swaping discs.You just need to put them on the drive normally.
No,, there's no way.I've tried but it seems that AR MAX doesn't read the codelist of the cd.But you can try to use the program i putted before to creat a super small codelist list and insert it into the ar max save file.The instructions are on a post of mine somewhere above.
And save files, i don't think it is going to work too.
Signature failed to load ---> Error 69
|
piccas0
Newbie
|
7. January 2006 @ 07:52 |
Link to this message
|
i used the guide from the first post, works perfect on my modded ps2!
only 1 thing was not mentioned:
i had to add a large dummy file to the cd/dvdgen compilation
(60000... sector error)
thanks :)
|
raz46t9
Newbie
|
17. January 2006 @ 12:30 |
Link to this message
|
hi,playguy. i wonna use a backup copy of AR max on my ps2, i have swap magic 3.6. can i do what i want with wot i got. i dont care about game codes, i jus really wonna use AR max to copy files from my usb to my memory card and save space on my memory card using AR max. can it b dun without an orginal AR?
|
playguy
Member
|
22. January 2006 @ 11:28 |
Link to this message
|
ok, i now what you need, but i can't make a guide right now.I'll make one as soon as i can.
Signature failed to load ---> Error 69
|
Senior Member
|
16. February 2006 @ 02:30 |
Link to this message
|
All you need is the original Action Replay Game ISO (No Cut off stuff like from torrent's), Back it up, than you'll be able to do it
PS2 Slimline + Swap Magic + Fan
PS3 60gb Version 1.90
PSP 3.52 M33 EUR Black Version + Logitech Hard Case + Logitech 3 Sound Speakers + 2gb Sony Memory Stick
Nintendo Wii + 3 Wii&Nunchuck Controllers
NDS Original + M3 Simply + 1gb Kingston MicroSD
NDS Lite + M3 Simply + 2gb Sandisk MicroSD
|
Advertisement
|
  |
|
jalaneme
Member
|
10. March 2006 @ 05:11 |
Link to this message
|
any chance we can get a guide for xploder and codebreaker to work with swap magic?
edit: i have the files extracted from my xploder v5 disc on my computer and i also have the modfied files from this topic but i wont know what way to put the files when rebuilding the ISO to burn it, how did you know wich way to put the files?
Slim Pstwo model no: SCPH-75003 CB (V14) Matrix infinity firmware 1.93 with custom Blue XCM case mod and lights.
Intel Pentium 4(R) Extreme Graphics 2 2.80ghz Microsoft Windows XP Professional (Service pack 2) 792RAM 40GB + external HDD 160GB BENQ DC DW1670 fw 1.03 8x 4x 2.4x DVDRW. Maxell DVD+R 50pk. 8x speed. average speed to burn 8x.
This message has been edited since posting. Last time this message was edited on 10. March 2006 @ 09:11
|