|
Replay Lite
|
|
Please note that the forum rules have changed. Posting of new codes is no longer allowed. See this thread for more information.
|
Senior Member
|
29. October 2008 @ 16:02 |
Link to this message
|
Originally posted by francosp:
One problem though is that all the channels that it found are freezing and breaking up.
It keeps saying bad signal on screen but I know for a fact it doesn't have a bad signal. I have tried it on two seperate TV's round the house and it is the same.
It could also your nhell box at your window, if it's an older type box, this can result in a poor signal at certain freqs.
If you have the old style nhell box, try your reply lite in one of your mates houses that a newer one.
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
|
|
Advertisement
|
|
|
|
Senior Member
|
29. October 2008 @ 16:08 |
Link to this message
|
Originally posted by pjmorie:
Tried unplugging the box for a few minutes and turing it on again but still getting the NA:Scrambled !
Go to RTE 2, you should get a picture as it is a freeview station and is unscrambled.
If it's still not working try turning off the Parental lock and install lock.
Menu
User Installation
Parental Lock......OK
Current Password =0000
Parental Lock.....OFF
Install Lock.....OFF
Press EXIT back to TV
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
|
|
pjmorie
Member
|
29. October 2008 @ 16:17 |
Link to this message
|
|
Both are off but still the same even on RTE 2. If I press INFO on the remote I can get what's currenty on but no pictures.
|
Senior Member
|
29. October 2008 @ 16:29 |
Link to this message
|
|
Make sure your auto update is switched on in Nagra.
Go into menu, user installation, parental lock, press red button for key manager, current key, check nagra is switched to auto update.
|
Senior Member
|
29. October 2008 @ 16:29 |
Link to this message
|
Originally posted by pjmorie:
Both are off but still the same even on RTE 2. If I press INFO on the remote I can get what's currenty on but no pictures.
Has to be a signal problem.
If you are using a splitter, try connecting the box without using the splitter.
You can also try your TV cable directly into your TV to make sure you have a good signal.
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
|
Senior Member
|
29. October 2008 @ 16:31 |
Link to this message
|
Hi Brian, how's life with you these days? :)
|
|
pjmorie
Member
|
29. October 2008 @ 16:34 |
Link to this message
|
Signal is good as my Starview is working when I plug the cable into it. I can't get access to the Auto update in Current Key, when I select it the screen just flashes.
|
Senior Member
|
29. October 2008 @ 16:44 |
Link to this message
|
But it does say auto update, right? What provider id have you got selected? Compare provider id etc on the starview with the replay and see if everything matches.
This message has been edited since posting. Last time this message was edited on 29. October 2008 @ 16:45
|
|
pjmorie
Member
|
29. October 2008 @ 16:52 |
Link to this message
|
|
When I select 'Current Key' the screen flicks and I can see the heading 'Edit Current Key' for a split seccond before it goes back to the page with the three options Current Key, Nagra, Reset. The box is also very slow to react to any of the buttons on the remote. When I got the box it had 4.9 on it. It game with instructions to update with 7.52irl but this only got me as far as 1800 Scrambled. Now have 9.10 on it.
|
Senior Member
|
29. October 2008 @ 16:56 |
Link to this message
|
|
Maybe try flashing it again. Sometimes the flash doesn't take properly the first time. Make sure you don't plug it out too quick after flashing.
|
|
pjmorie
Member
|
29. October 2008 @ 17:13 |
Link to this message
|
When flashing should I use the 9.10 version and should the 'Maintain User Data' be enabled? Not very good at these things as the Starview I got was already setup.
|
Senior Member
|
29. October 2008 @ 17:18 |
Link to this message
|
Originally posted by pjmorie:
When flashing should I use the 9.10 version and should the 'Maintain User Data' be enabled? Not very good at these things as the Starview I got was already setup.
I think you should go to the Library.
Download the 742A file and flash with that first.
Then flash with the 910.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Connect the Null modem lead from your box to your PC.
Open up the Stblink and select "Run"
DON'T do the Setup Comm.
Untick the "Maintain User Data" box.
Ignore the error message you will receive.
Select "Upgrade Software" and get the 742A file.
It will then start to transfer to you box.
When your PC reads "Transfer Complete" WAIT another couple of minutes before unplugging.
When the files are being transferred from your PC to the box, the led on the box will be flashing at this speed
DON'T unplug the box until until you see it flashing at this speed
When the flash is complete, unplug the box, null modem lead and exit the Stblink.
Power up the box again and WAIT until the light on the front goes Green.
Then do the above with the 910 file.
Then do your Auto Search for channels.
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
This message has been edited since posting. Last time this message was edited on 29. October 2008 @ 17:22
|
|
pjmorie
Member
|
29. October 2008 @ 17:23 |
Link to this message
|
|
After falshing with the 742A then the 910 should I just do an autoscan at 6875.
|
Senior Member
|
29. October 2008 @ 18:05 |
Link to this message
|
Originally posted by pjmorie:
After falshing with the 742A then the 910 should I just do an autoscan at 6875.
Yes PJ,
The way you did the last scan should work.
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
This message has been edited since posting. Last time this message was edited on 29. October 2008 @ 18:07
|
|
pjmorie
Member
|
29. October 2008 @ 18:10 |
Link to this message
|
|
After completing the search It found 129 channels and 35 radio. Next I selected the View button and it said Saving Data. I can now see some of the channels, on others the picture and sound is freezing up and on more channels the picture and sound is way out of sync. Hopefully these will sort themselves out after a bit of time.
|
Senior Member
|
29. October 2008 @ 18:18 |
Link to this message
|
Originally posted by Evastar:
Hi Brian, how's life with you these days? :)
Hi Eva,
Been very busy at home.
Hope all is well with you.
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
|
Senior Member
|
29. October 2008 @ 18:21 |
Link to this message
|
Originally posted by pjmorie:
After completing the search It found 129 channels and 35 radio. Next I selected the View button and it said Saving Data. I can now see some of the channels, on others the picture and sound is freezing up and on more channels the picture and sound is way out of sync. Hopefully these will sort themselves out after a bit of time.
Well done PJ,
You showed great patience.
The channels should come into sync after a bit of time as you said.
Cheers M8ty
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
|
|
pjmorie
Member
|
29. October 2008 @ 18:24 |
Link to this message
|
|
Thnaks for all the help, will let ye know in a day or two if the channels sort themselves out.
|
Senior Member
|
30. October 2008 @ 04:58 |
Link to this message
|
Originally posted by BRIAN1956:
Originally posted by Evastar:
Hi Brian, how's life with you these days? :)
Hi Eva,
Been very busy at home.
Hope all is well with you.
Yeah doing good Brian, thanks. I love the new sig, my son loves penguins!
@pj, well done! :) Hope it sorts itself out for you!
|
|
GERBHOY
Junior Member
|
30. October 2008 @ 09:04 |
Link to this message
|
Hi Sandisk or anyone out there who can help me i mentioned a few weeks ago i was looking for Replay Lite Boxes v910 but i have been away for a couple of weeks and the pm for Sandisk no longer works and i have no contact for them.Anyways if anyone can help i am looking for 3 Replay Lite Boxes v910 how much would they be?
Random question can anyone get the following channels in Dublin
Sky 3 Channel 5 Watch,Challenge or Arsenal TV in Dublin?If so how?
Keep up the good work guys and gals
GerBhoy
|
Senior Member
|
30. October 2008 @ 09:18 |
Link to this message
|
|
You will not be able to buy Replay Lites with 910 on them you will have to flash them yourself. Try skywonder or bubbleboxes, somewhere like that.
The channels are up to the service provider, you can't currently get those channels in dublin as far as i know.
|
|
power01
Member
|
31. October 2008 @ 11:00 |
Link to this message
|
|
Hi,smoke came out of my relay box,on opening up the box i looked at the caps and noticed that the,E4andE2caps have blowen can this be fixed,THANKS.
|
|
GERBHOY
Junior Member
|
31. October 2008 @ 11:11 |
Link to this message
|
|
Cheers Evastar thanks for your help.
Keep up the good work guys and gals.
GerBhoy
|
|
theshev77
Suspended due to non-functional email address
|
31. October 2008 @ 12:02 |
Link to this message
|
Hey all
Regarding my query on page 231, thanks foe the replies Evastar and Brian1956. have tried your suggestions but the problem seems to be that even though the green light on the box stays on constantly, my comp thinks its turned off. So I cant try to start the download at all, as i cant make any connection through the stb link. It keeps telling me to turn my box on. is there a way of starting the download in this situation?
Would appreciate any help given
thanks guys
theshev77
|
|
Advertisement
|
|
|
Senior Member
|
31. October 2008 @ 12:43 |
Link to this message
|
|
Are you 100% sure that you have a null modem cable, not just an ordinary female to female 9 pin cable?
Plus what is on your pc, XP or vista?
|
