|
KRYPTVIEW A750
|
|
|
barts2
Member
|
30. June 2009 @ 15:56 |
Link to this message
|
|
NO mate not in mute mode lol just a prob with the box im sendin it back
|
|
Advertisement
|
|
|
|
|
mickrick1
Junior Member
|
30. June 2009 @ 16:01 |
Link to this message
|
Hi all,
I have ordered a Kryptview and have been informed that it will arrive this Thursday. I have had a Eurovox for the last 18 months. The installation for the Eurovox was very simple - just a matter of hooking the box up and doing a scan if I remember correctly. I didn't require the null modem cable until I updated the firmware. I was wondering is it much the same procedure with the Kryptview? When I look at FergusB's directions at the start of the thread I wondered is it necessary to use the null modem cable in the setup of the Kryptview? Sorry to sound naive but any help would be much appreciated.
|
AfterDawn Addict
|
30. June 2009 @ 16:04 |
Link to this message
|
Originally posted by mickrick1:
Hi all,
I have ordered a Kryptview and have been informed that it will arrive this Thursday. I have had a Eurovox for the last 18 months. The installation for the Eurovox was very simple - just a matter of hooking the box up and doing a scan if I remember correctly. I didn't require the null modem cable until I updated the firmware. I was wondering is it much the same procedure with the Kryptview? When I look at FergusB's directions at the start of the thread I wondered is it necessary to use the null modem cable in the setup of the Kryptview? Sorry to sound naive but any help would be much appreciated.
It will be sent with fta firmware only so will need to be flashed.
|
|
filbur
Junior Member
|
30. June 2009 @ 16:12 |
Link to this message
|
hi karljd i need your help if possible i am in the munster area where the eurovox max v still works ,my problem is that my max v is looking for code to be updated allthough the houses around me are all working fine i had updated theres aswell as my own with the latest firmware and all working fine till today any idea what could be wrong i have put in the c**des manually and re scanned the box again and still looks for the code any help would be appricated
|
AfterDawn Addict
|
30. June 2009 @ 16:19 |
Link to this message
|
Originally posted by filbur:
hi karljd i need your help if possible i am in the munster area where the eurovox max v still works ,my problem is that my max v is looking for code to be updated allthough the houses around me are all working fine i had updated theres aswell as my own with the latest firmware and all working fine till today any idea what could be wrong i have put in the c**des manually and re scanned the box again and still looks for the code any help would be appricated
Try a factory reset and a rescan,ps should have posted in a eurovox thread.
|
|
filbur
Junior Member
|
30. June 2009 @ 16:27 |
Link to this message
|
|
thanks Karljd sorry bout that,1 more question is the kryptview the only box that is able to cope with nagrs 3 at the moment
|
AfterDawn Addict
3 product reviews
|
30. June 2009 @ 16:32 |
Link to this message
|
|
no cable box is able for N3 as of yet, the kryptview works on N2, no ones knows how N3 will pan out
|
|
filbur
Junior Member
|
30. June 2009 @ 16:36 |
Link to this message
|
Originally posted by MICKAH:
no cable box is able for N3 as of yet, the kryptview works on N2, no ones knows how N3 will pan out
Ta MICKAH sorry for the lack of knowledge but why are people buying the kryptview is it able to work even when the cable guys have updated their side
|
AfterDawn Addict
3 product reviews
|
30. June 2009 @ 16:51 |
Link to this message
|
firmware has been fixed to work on N2, but N3 will be the challange, and the Kryptview team were first and foremost with their updates and support last time, as if any box will work with N3, anyones guess at this stage, but enjoy your box while its working and worry about n3 when it happens
|
|
viewfirst
Newbie
|
30. June 2009 @ 17:22 |
Link to this message
|
Originally posted by karljd:
Originally posted by filbur:
hi karljd i need your help if possible i am in the munster area where the eurovox max v still works ,my problem is that my max v is looking for code to be updated allthough the houses around me are all working fine i had updated theres aswell as my own with the latest firmware and all working fine till today any idea what could be wrong i have put in the c**des manually and re scanned the box again and still looks for the code any help would be appricated
Try a factory reset and a rescan,ps should have posted in a eurovox thread.
FlipFlap
|
|
viewfirst
Newbie
|
30. June 2009 @ 17:26 |
Link to this message
|
Hello Guys!
Have gone through many threads in this forum, trying to get kryptview A750 up and unning. Have been able to upload new firmware on the box(Got the success message), Looks like flashing did happen and Box re-boot itself. However, currently the box is showing 0000 on the console. Its connected via scart cable to TV, and there is no signal either.
Its connected to Virgin Cable into RF in port. The virgin box works just fine.
Any suggestions what next i could try!
Much Appreciated.
FlipFlap
|
AfterDawn Addict
|
30. June 2009 @ 17:27 |
Link to this message
|
Originally posted by viewfirst:
Originally posted by karljd:
Originally posted by filbur:
hi karljd i need your help if possible i am in the munster area where the eurovox max v still works ,my problem is that my max v is looking for code to be updated allthough the houses around me are all working fine i had updated theres aswell as my own with the latest firmware and all working fine till today any idea what could be wrong i have put in the c**des manually and re scanned the box again and still looks for the code any help would be appricated
Try a factory reset and a rescan,ps should have posted in a eurovox thread.
?
|
|
mickrick1
Junior Member
|
1. July 2009 @ 11:30 |
Link to this message
|
Originally posted by karljd:
Originally posted by mickrick1:
Hi all,
I have ordered a Kryptview and have been informed that it will arrive this Thursday. I have had a Eurovox for the last 18 months. The installation for the Eurovox was very simple - just a matter of hooking the box up and doing a scan if I remember correctly. I didn't require the null modem cable until I updated the firmware. I was wondering is it much the same procedure with the Kryptview? When I look at FergusB's directions at the start of the thread I wondered is it necessary to use the null modem cable in the setup of the Kryptview? Sorry to sound naive but any help would be much appreciated.
It will be sent with fta firmware only so will need to be flashed.
Thanks Karl. Is the flash procedure for the Kryptview the same as it is for the Eurovox as per Eamo's library? I haven't been able to find a copy of Kryptview flashing procedure. Apologies for being a pain but my Kryptview arrived this morning and I am hoping to have it up and running before nightfall.
Cheers Mick.
|
|
nobby3ie
Newbie
|
1. July 2009 @ 11:30 |
Link to this message
|
Originally posted by e45:
Originally posted by nobby3ie:
Hi,
Havin trouble scanning channels with the krytview. Flashed with latest firmware, restored factory settings but every scan fails and brings me back to the easy installation page.
Am i doing anything wrong or is there another thing i'm missing out on. I had the box and knew how to re-scan, but not really familiar with the kryptview. thanks for any assistance.
When on auto scan, only put your provider in and the box under that should have network, then press the green button on remote, after this you will get to choose an area, you choose legacy channels, and press ok thats it sorted after that
Thanks for the reply. Been away for a few days and decided to give it another go.
This is what i'm doing...
Easy Installation
Automatic Searck - ok
network .nthell ok
channel search type - network-ok
You say that after this I will get to choose an area,and to choose legacy channels. It's not giving me the option. What happens next is ...
New Screen- Network scan
add tp list - they all say already exists
Searched 7/7 and tells me its complete so i exit and it takes me straight back to the eeasy installation screen!
What am I doing wrong. Going round in circles here! Cheers.
By the way, Im in Dublin 6 area
|
AfterDawn Addict
3 product reviews
|
1. July 2009 @ 11:35 |
Link to this message
|
Originally posted by viewfirst:
Hello Guys!
Have gone through many threads in this forum, trying to get kryptview A750 up and unning. Have been able to upload new firmware on the box(Got the success message), Looks like flashing did happen and Box re-boot itself. However, currently the box is showing 0000 on the console. Its connected via scart cable to TV, and there is no signal either.
Its connected to Virgin Cable into RF in port. The virgin box works just fine.
Any suggestions what next i could try!
Much Appreciated.
Have ya tried flicking the chans forward?
|
AfterDawn Addict
|
1. July 2009 @ 11:48 |
Link to this message
|
Originally posted by mickrick1:
Originally posted by karljd:
Originally posted by mickrick1:
Hi all,
I have ordered a Kryptview and have been informed that it will arrive this Thursday. I have had a Eurovox for the last 18 months. The installation for the Eurovox was very simple - just a matter of hooking the box up and doing a scan if I remember correctly. I didn't require the null modem cable until I updated the firmware. I was wondering is it much the same procedure with the Kryptview? When I look at FergusB's directions at the start of the thread I wondered is it necessary to use the null modem cable in the setup of the Kryptview? Sorry to sound naive but any help would be much appreciated.
It will be sent with fta firmware only so will need to be flashed.
Thanks Karl. Is the flash procedure for the Kryptview the same as it is for the Eurovox as per Eamo's library? I haven't been able to find a copy of Kryptview flashing procedure. Apologies for being a pain but my Kryptview arrived this morning and I am hoping to have it up and running before nightfall.
Cheers Mick.
Have a look in HERE mick
|
|
mickrick1
Junior Member
|
1. July 2009 @ 15:28 |
Link to this message
|
Originally posted by karljd:
Originally posted by mickrick1:
Originally posted by karljd:
Originally posted by mickrick1:
Hi all,
I have ordered a Kryptview and have been informed that it will arrive this Thursday. I have had a Eurovox for the last 18 months. The installation for the Eurovox was very simple - just a matter of hooking the box up and doing a scan if I remember correctly. I didn't require the null modem cable until I updated the firmware. I was wondering is it much the same procedure with the Kryptview? When I look at FergusB's directions at the start of the thread I wondered is it necessary to use the null modem cable in the setup of the Kryptview? Sorry to sound naive but any help would be much appreciated.
It will be sent with fta firmware only so will need to be flashed.
Cheers Karl. Downloaded firmware successfully or at least that's what it said on the screen. I am now trying to scan but getting a lot of grief. I have followed FergusB's sequence for scanning but each time I click on yellow button to accept scan on different frequency I get the response 'FAILED'. Would you (or anyone) be able to enlighten me on this as I have spent over an hour now and I'm no furtehr ahead. Cheers Mick.
Thanks Karl. Is the flash procedure for the Kryptview the same as it is for the Eurovox as per Eamo's library? I haven't been able to find a copy of Kryptview flashing procedure. Apologies for being a pain but my Kryptview arrived this morning and I am hoping to have it up and running before nightfall.
Cheers Mick.
Have a look in HERE mick
|
|
mickrick1
Junior Member
|
1. July 2009 @ 15:38 |
Link to this message
|
Originally posted by karljd:
Originally posted by mickrick1:
Originally posted by karljd:
Originally posted by mickrick1:
Hi all,
I have ordered a Kryptview and have been informed that it will arrive this Thursday. I have had a Eurovox for the last 18 months. The installation for the Eurovox was very simple - just a matter of hooking the box up and doing a scan if I remember correctly. I didn't require the null modem cable until I updated the firmware. I was wondering is it much the same procedure with the Kryptview? When I look at FergusB's directions at the start of the thread I wondered is it necessary to use the null modem cable in the setup of the Kryptview? Sorry to sound naive but any help would be much appreciated.
It will be sent with fta firmware only so will need to be flashed.
Thanks Karl. Is the flash procedure for the Kryptview the same as it is for the Eurovox as per Eamo's library? I haven't been able to find a copy of Kryptview flashing procedure. Apologies for being a pain but my Kryptview arrived this morning and I am hoping to have it up and running before nightfall.
Cheers Mick.
Have a look in HERE mick
Cheers Karl. Downloaded firmware successfully or at least that's what it said on the screen. I am now trying to scan but getting a lot of grief. I have followed FergusB's sequence for scanning but each time I click on yellow button to accept scan on different frequency I get the response 'FAILED'. Would you (or anyone) be able to enlighten me on this as I have spent over an hour now and I'm no further ahead. Cheers Mick.
|
Junior Member
|
1. July 2009 @ 15:49 |
Link to this message
|
|
nobby3ie
The results you describe can be caused by no signal being connected.
Always connect the cable directly to the KV with NO splitters etc.
There are 7 TPs in the KV by default and if there is no cable connected the KV cannot read the required TPs for your service provider and then go on to store and scan those TPs.
It will count through the default 7 and report them "already exist"
These default TPs refer to frequencies outside the range used here and when scanned will find no channels.
I have also had a KV which had a faulty tuner and showed the same symptoms. I used to live in D6.
|
Junior Member
|
1. July 2009 @ 16:48 |
Link to this message
|
Hi all
Got my KV 750 today and have been trying to flash. Got as valid null mode cable and tested with my Euro Max V2008 and Ok.
When I run the loader and select download and open the correct BIN file Kryptview_19032009.bin then clicked on Start. After 5 seconds it comes back with a dialogue box titled STB Editor and message "The downloading is not requested". The Download box shows "Read REQ fail"
Dub South, NTHell, have done factory reset, power off/on/standby and all othe rcombinations. When I do a scan it does find the stations but all stay coded - formware showing December 2008.
Please help
|
AfterDawn Addict
|
1. July 2009 @ 16:53 |
Link to this message
|
Originally posted by mickrick1:
Originally posted by karljd:
Originally posted by mickrick1:
Originally posted by karljd:
Originally posted by mickrick1:
Hi all,
I have ordered a Kryptview and have been informed that it will arrive this Thursday. I have had a Eurovox for the last 18 months. The installation for the Eurovox was very simple - just a matter of hooking the box up and doing a scan if I remember correctly. I didn't require the null modem cable until I updated the firmware. I was wondering is it much the same procedure with the Kryptview? When I look at FergusB's directions at the start of the thread I wondered is it necessary to use the null modem cable in the setup of the Kryptview? Sorry to sound naive but any help would be much appreciated.
It will be sent with fta firmware only so will need to be flashed.
Thanks Karl. Is the flash procedure for the Kryptview the same as it is for the Eurovox as per Eamo's library? I haven't been able to find a copy of Kryptview flashing procedure. Apologies for being a pain but my Kryptview arrived this morning and I am hoping to have it up and running before nightfall.
Cheers Mick.
Have a look in HERE mick
Cheers Karl. Downloaded firmware successfully or at least that's what it said on the screen. I am now trying to scan but getting a lot of grief. I have followed FergusB's sequence for scanning but each time I click on yellow button to accept scan on different frequency I get the response 'FAILED'. Would you (or anyone) be able to enlighten me on this as I have spent over an hour now and I'm no further ahead. Cheers Mick.
sorry mick only popping in for a minute try this originaly posted by fergusb ok this is where you are going wrong follow below
1 do a factory default now and nothing eles till that has finished
2 new screen go to bottom option select auto scan
3 do not change any settings in here just press the GREEN BUTTON ONLY
4 next screen you will see legacy channels in here after it has finished above patients on this
5 press ok when you see the legacy channels nothing else and just leave it ok that should sort you out
|
|
viewfirst
Newbie
|
1. July 2009 @ 17:01 |
Link to this message
|
|
Tried every button on the remote. Just gonna try re-installing the file on kv750 now.
FlipFlap
|
|
mickrick1
Junior Member
|
1. July 2009 @ 17:35 |
Link to this message
|
Originally posted by karljd:
Originally posted by mickrick1:
Originally posted by karljd:
Originally posted by mickrick1:
Originally posted by karljd:
Originally posted by mickrick1:
Hi all,
I have ordered a Kryptview and have been informed that it will arrive this Thursday. I have had a Eurovox for the last 18 months. The installation for the Eurovox was very simple - just a matter of hooking the box up and doing a scan if I remember correctly. I didn't require the null modem cable until I updated the firmware. I was wondering is it much the same procedure with the Kryptview? When I look at FergusB's directions at the start of the thread I wondered is it necessary to use the null modem cable in the setup of the Kryptview? Sorry to sound naive but any help would be much appreciated.
It will be sent with fta firmware only so will need to be flashed.
Thanks Karl. Is the flash procedure for the Kryptview the same as it is for the Eurovox as per Eamo's library? I haven't been able to find a copy of Kryptview flashing procedure. Apologies for being a pain but my Kryptview arrived this morning and I am hoping to have it up and running before nightfall.
Cheers Mick.
Have a look in HERE mick
Cheers Karl. Downloaded firmware successfully or at least that's what it said on the screen. I am now trying to scan but getting a lot of grief. I have followed FergusB's sequence for scanning but each time I click on yellow button to accept scan on different frequency I get the response 'FAILED'. Would you (or anyone) be able to enlighten me on this as I have spent over an hour now and I'm no further ahead. Cheers Mick.
sorry mick only popping in for a minute try this originaly posted by fergusb ok this is where you are going wrong follow below
1 do a factory default now and nothing eles till that has finished
2 new screen go to bottom option select auto scan
3 do not change any settings in here just press the GREEN BUTTON ONLY
4 next screen you will see legacy channels in here after it has finished above patients on this
5 press ok when you see the legacy channels nothing else and just leave it ok that should sort you out
Hi Karl - I did the factory default, new screen came up, went to bottom and selected autoscan, and pressed the green button. What came up was 'Add TP list'. Then added 6 TP's, went straight to Automatic Search and took about 20 seconds to scan thru Radio and TV channels before message 'COMPLETE (EXIT)' showed on screen. There was no mention of Legacy Channels. I feel that this is where my problem lies. Any help from anybody would be greatly appreciated.
Cheers Mick.
|
Member
|
1. July 2009 @ 18:03 |
Link to this message
|
Originally posted by mickrick1:
Hi Karl - I did the factory default, new screen came up, went to bottom and selected autoscan, and pressed the green button. What came up was 'Add TP list'. Then added 6 TP's, went straight to Automatic Search and took about 20 seconds to scan thru Radio and TV channels before message 'COMPLETE (EXIT)' showed on screen. There was no mention of Legacy Channels. I feel that this is where my problem lies. Any help from anybody would be greatly appreciated.
Cheers Mick.
should be 12 TP's,..it's a long shot but try the steps below,..it sounds very like the box is not clearing TP's & channels correctly after you do a factory default,..the original KV had this issue also,...try this..
(1)..remove N*L cable from the box. (2)..do a factory default. (3).. turn off the box & remove the the power & scart cables & leave it like this over night then try a new installation from scratch.
Dream Elite Black Hole Phoenix Edition Sim2.01 SSL84 DM800HD
|
|
Advertisement
|
|
|
AfterDawn Addict
3 product reviews
|
1. July 2009 @ 20:42 |
Link to this message
|
Originally posted by marcasg:
Hi all
Got my KV 750 today and have been trying to flash. Got as valid null mode cable and tested with my Euro Max V2008 and Ok.
When I run the loader and select download and open the correct BIN file Kryptview_19032009.bin then clicked on Start. After 5 seconds it comes back with a dialogue box titled STB Editor and message "The downloading is not requested". The Download box shows "Read REQ fail"
Dub South, NTHell, have done factory reset, power off/on/standby and all othe rcombinations. When I do a scan it does find the stations but all stay coded - formware showing December 2008.
Please help
if you follow the instructions under mickrick1, karljd explains everything you need to do its about 2 messages above this one.
ALL INFO FOR EDUCATIONAL PURPOSE ONLY
HOOTER007
|
