Let me first start out with I have a liteon 16-4ds
I have dumped all the information off the drive and attempted a kamikazee hack.
I got the beeps and the status went to 0x00 then I tried to read the drive and now am getting an error. I am very familiar with the phat boxes and just starting to mess with some of the slims so I dont need my hand held just need to know what to do from here. My jf log is below. any help would be greatly appreciated. It beeped as it unlocked and everything and now it will intro but says 0xff?
Im a little stuck what to do from here, the drive does re-intro just can't read, write, or flash / ALSO WHEN I RE-INTRO I GET A RETURN TO NORMAL FROM MRA HACK POSITION MESSAGE??
================================================================================
Sending Vendor Outro to port 0x0000
Drive is Slim Lite-On..
Key found in KeyDB at record (9 - new black slim from shea)
Key is: xxxxxxx(blanked out on putpose)
Key has been tested and verified, thanks C4eva !
Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
..................
Serial flash found with Status 0x72
Sending Device ID request to port 0x0000
Spi Status: 0x8C
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
Sending Spi UnLock request to Port 0x0000
.....................................................................................................................................................................................................................................................................................................................................................................................................................................................
Spi Status: 0x00
Getting Status from port 0x0000
Serial flash found with Status 0x72
Reading Drive Key.
............
Stage 1 failed
Authorisation Failed!
Getting Status from port 0x0000
Invalid Status 0x80
Zachary Paitsel
This message has been edited since posting. Last time this message was edited on 11. October 2012 @ 10:33
|