|
Post your DISC quality scans here 2
|
|
AfterDawn Addict
4 product reviews
|
27. July 2008 @ 17:04 |
Link to this message
|
burnt on the samsung i was haven the trouble with the sata cable. looks like its fixed. burnt@18x
scan with the S203b
scan with 18x litey
very nice jitter as well
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
27. July 2008 @ 17:57 |
Link to this message
|
cincyrob,
Quote:
very nice jitter as well
How are you getting yours to show Jitter? I have the same version and mine is greyed out so you can't turn the Jitter measurements on!
Russ
GigaByte 990FXA-UD5 - AMD FX-8320 @4.0GHz @1.312v - Corsair H-60 liquid CPU Cooler - 4x4 GB GSkill RipJaws DDR3/1866 Cas8, 8-9-9-24 - Corsair 400-R Case - OCZ FATAL1TY 550 watt Modular PSU - Intel 330 120GB SATA III SSD - WD Black 500GB SATA III - WD black 1 TB Sata III - WD Black 500GB SATA II - 2 Asus DRW-24B1ST DVD-Burner - Sony 420W 5.1 PL-II Suround Sound - GigaByte GTX550/1GB 970 Mhz Video - Asus VE247H 23.6" HDMI 1080p Monitor
 |
AfterDawn Addict
4 product reviews
|
27. July 2008 @ 18:06 |
Link to this message
|
@Russ
here ya go Russ. only thing if your scanning with the samsung it doesnt support the sitter test.nor does the Optaric...i know you have the asus drives i dont know if they do or not.
|
AfterDawn Addict
|
27. July 2008 @ 18:27 |
Link to this message
|
Oi!!!!! RedRob is here and it looks like he's got a NICE little scan to go over. :) Rob that is very nice and on one of your previously disliked media list if memory serves. :D GREAT jitter too!!!!!!!!!! :P Guess you need to go out and buy some CHEAPY CMC MAG stuff and see how she really performs..... hehehe. j/k... i can send you some.. course i charge more than the stores... :P
....gm
|
AfterDawn Addict
4 product reviews
|
27. July 2008 @ 18:49 |
Link to this message
|
|
yea this is the only place i post now. yea that is a nice set of media i got there. them printable verbs are looking good. what amazes me is i burnt that puppy at 18x(only got up to 16.51x) i just did the scan on my 20x sata litey and got almost the same scan
|
AfterDawn Addict
|
27. July 2008 @ 18:59 |
Link to this message
|
Originally posted by cincyrob:
yea this is the only place i post now. yea that is a nice set of media i got there. them printable verbs are looking good. what amazes me is i burnt that puppy at 18x(only got up to 16.51x) i just did the scan on my 20x sata litey and got almost the same scan
Rob it won't always reach the MAX speed selected but I'm sure you already knew that. :P I've only had a few drives reach the full amount (allowed that is), IIRC the Sammy was one of them, the Pioneers, and the DH-20A3P... of course that's with my WEAK memory cells. lol. :P I like the AD-7200S but I haven't really put it thru the torture tests!!! <<<that's a laugh!!!!
Anyway nice scans buddy and do some more.. :) btw are those the "familiar" DVD-R printables you can get at Sam's Club?? :D
.....gm
|
AfterDawn Addict
4 product reviews
|
27. July 2008 @ 19:58 |
Link to this message
|
Originally posted by greensman:
I like the AD-7200S but I haven't really put it thru the torture tests!!! <<<that's a laugh!!!!
Anyway nice scans buddy and do some more.. :) btw are those the "familiar" DVD-R printables you can get at Sam's Club?? :D
.....gm
yea the AD-7200S is turning out to be a favorite for burning.
yup thems the ones ya can get at Sams. or a good friends....lmao
|
AfterDawn Addict
4 product reviews
|
28. July 2008 @ 22:10 |
Link to this message
|
|
This message has been edited since posting. Last time this message was edited on 29. July 2008 @ 07:21
|
AfterDawn Addict
|
29. July 2008 @ 01:15 |
Link to this message
|
Originally posted by cincyrob:
kinda off topic here. but take a look at this link about cpu coolers..some sweet info. think i might have to try one... kinda like the vendetta 2 myself
what link goofy?? :P at least i added a link.. maybe the wrong one... but it was a link.... hehehe. :P
....gm
|
AfterDawn Addict
|
29. July 2008 @ 01:18 |
Link to this message
|
|
yeah i don't see it either bro lol
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
|
AfterDawn Addict
4 product reviews
|
29. July 2008 @ 07:22 |
Link to this message
|
|
what ya mean no link???? ive clicked on it like 10 times now????
ROFLMFAO
|
AfterDawn Addict
|
2. August 2008 @ 09:05 |
Link to this message
|
Here goes an attempt to post a disc quality score for a new NEC-Optiarc AD7200S-only the second burn for the drive. The first burn was an on the fly copy of a copy and actually had a slightly better PI failure only 1 over 1 @2. also a 95 on a Ritek R16.This scan was on good media burned at 8X in Recode.
Shot at 2008-08-02
EDIT: Thanks greensman for all the help in getting the damn drive updated with Liggy's firmware(that was exciting-Binflashy thing) and booktyping it to DVD-ROM. And for the posting recommendations.
This message has been edited since posting. Last time this message was edited on 2. August 2008 @ 09:14
|
AfterDawn Addict
4 product reviews
|
2. August 2008 @ 09:41 |
Link to this message
|
looks nice garmoon. i think you will really like that drive. i almost hate to say it. i think it might be my best BURNER.. class isnt out yet..lol
as for reading/ripping i think the samsung SH-S203B is my all around reading drive. i havent gotten that good of burns( scan wise on any media) and my LH-18A1P is by far the best scanning drive..
im gonna have a bunch of scans here soon. i just got this
Transformers Cybertron The Ultimate Collection
for my sons(well me too).lol
also tried something here. ive ripped 3 of the disc at the same time different proggy's to do it. took up about 7% of the cpu. but it did seem a little slow to open up stuff/programs/internet???
i stand corrected. i was useing about 58% of CPU.
look at this
once i get them all ripped. i will run them through dvd-rebuilder(2 passes) and burn them to some 16x-r printable verbs. MCC 03RG20
might just burn them on the 7200S just to see how many 98-99 scores i get..lol(7 disc total)
if ya look at the programs i used. clonedvd2 was used with the sammy
dvd decrypter(ri4m) was with the LH-18A1p and dvdfab was with the LH-20A1S.
the sammy got done first. then the LH-20A1S then last the LH-18A1P. all 3 were started within 10 seconds of each other. the LH-18A1P took about 2 mins longer than the other 2. they finished within 30 sec of each other....
what ya think maybe sata is faster transfer rate????
ok im done babbling off to ripp somemore then rebuilder
This message has been edited since posting. Last time this message was edited on 2. August 2008 @ 10:06
|
AfterDawn Addict
|
2. August 2008 @ 10:31 |
Link to this message
|
Well that's interesting. I've never tried to rip more than one at a time. I should have the power to do it tho. Quality doesn't suffer?? I do have three DVD RW drives and have burned 3 at the same time with Nero. Yeah I like it so far, it replaced the Lite_On Optiarc 7191S which was also a good burner. Now I have a Litey-NEC-LG. LG-ext will read a pizza when Benq1650s farted. LOL
What's with the scans tho. I scanned that same disc from above post with the 7200 and got a lot higher PI failure# some 3-4s and more of them and got a 96 score. Someone can explain that?
|
AfterDawn Addict
4 product reviews
|
2. August 2008 @ 10:51 |
Link to this message
|
its the way the 7200s reads the disc. it reads in 8 ECC instead of 1 ECC like the litey's do. but you can change that in nero the optaric lets you do that. it hsa the same type of reading scheme that the benQ's have/use.
doesnt mean it is any better or worse. just how it reads. so it will take a higher spike say 4 to drop the score. a spike of 4 on a litey will get ya 90 score a spike of 4 on the optaric will get ya a 96 i think it is...
hope that explains it some...im not no expert but thats how ive interpeted in from what i have read about these test.
as for ripping at the same time. i doubt there will be any quality loss. your useing different burners and software to do them... plus im gonna run them through dvd-rebuild... actually doing the first one now....
This message has been edited since posting. Last time this message was edited on 2. August 2008 @ 11:09
|
AfterDawn Addict
4 product reviews
|
2. August 2008 @ 11:36 |
Link to this message
|
ok i guess i talked up the 7200s to much..lol
im getting this error on it when trying to burn. i get it in magburn and clonedvd2 says bad media. ive tried 5 different disc and 3 brands. same thing happens
im trying another drive with the same disc. to see if i get the error
edit:
useing the same disc that wouldnt burn in the 7200s is now burning in th LH-20A1S
EDIT:
well i can use the other disc that wouldnt burn in all the other drives but the 7200s. gonna uninstall and reinstall it and see if it make a difference
This message has been edited since posting. Last time this message was edited on 2. August 2008 @ 11:47
|
AfterDawn Addict
4 product reviews
|
2. August 2008 @ 12:10 |
Link to this message
|
|
well i uninstalled,then reinstalled. i think there is something wrong with it. if you go into my computer and click on that drive and try to eject it wont even do that. have to push the button on the front of the drive.
it wont burn with any program or any disc. guess i will try the sata cable... there is something wrong with this damn board if its another cable.. i cant beleive 4 different cables will be bad.. this is ridiculious
|
AfterDawn Addict
|
2. August 2008 @ 12:11 |
Link to this message
|
@cincyrob
Thanks for the heads up; that sounds right to me. Probably anything would have sounded right to me. Hate to hear you having issues with 7200. I just told greenie that everything going too good-waiting for the other shoe to drop this week. I hope I don't run into same problem you're having with mine. I'll slap the 7191s back in a sec-don't need headaches, it's Saturday! Thanks again Rob, you've also been helpful with this whole new pc thing. I did learn today that I can close the cloneDVD burns in decrypter and they are fine. Before only the external LG would work properly with closing clonedvd burns.
|
AfterDawn Addict
4 product reviews
|
2. August 2008 @ 12:48 |
Link to this message
|
|
well i opend the case up checked the cables. its fin. i did plug it in another conector. the one the sammy was in and now it is reading the disc and letting me burn with it. i know have the problem with it as i did with the sammy plugged into this sata connector...cant keep the buffer up where it needs.
this board is garbage. ive had nothing but problems with this POS. guess i will try the esata pluggins and see how that works.
|
AfterDawn Addict
|
2. August 2008 @ 13:43 |
Link to this message
|
Rob it seems that you only have a couple of choices to look at with the AD-7200S. First would be the SATA cable or the SATA port on the mobo. :) Both concern the SATA connection. :P NEXT I would consider the f/w on the AD-7200S, maybe a fresh flash could help. ;)
What kind of cables are you using?? Are they from the mobo kit or something you bought?? I'm running out of options here buddy. Get an ASUS, DFI, or MSI... lol. j/k.... trying to start something.... hehehe. :P
...gm
|
AfterDawn Addict
4 product reviews
|
2. August 2008 @ 13:45 |
Link to this message
|
pluged it into the extra Esata plugin.. damn near shut my system down.. made all kinds of noise, mouse stoped working had to hit reset.
check this out. i pluged it back in its original slot.. works perfect????go figure??
|
AfterDawn Addict
4 product reviews
|
2. August 2008 @ 13:46 |
Link to this message
|
Originally posted by greensman:
Rob it seems that you only have a couple of choices to look at with the AD-7200S. First would be the SATA cable or the SATA port on the mobo. :) Both concern the SATA connection. :P NEXT I would consider the f/w on the AD-7200S, maybe a fresh flash could help. ;)
What kind of cables are you using?? Are they from the mobo kit or something you bought?? I'm running out of options here buddy. Get an ASUS, DFI, or MSI... lol. j/k.... trying to start something.... hehehe. :P
...gm
ASUS P5Q Deluxe is next. if not the premium...lol
|
AfterDawn Addict
|
2. August 2008 @ 14:18 |
Link to this message
|
|
Rob
I'm with greensman,before doing anything drastic have you tried to just swapping out the SATA cable you could have a wire in that cable broken and not making contact correctly. Reseating it may have made it connect again and it might go out again. Cheap way to check. That is if you haven't already done so. JM2C.
|
AfterDawn Addict
4 product reviews
|
2. August 2008 @ 14:22 |
Link to this message
|
|
i checked the cable, looks fine. i think it the sata pluggins. ive had to change out 3 different cables now..
GM. 2 of them were the cables that came with the mobo... and the other one was one that came with a drive.
|
|
Advertisement
|
|
|
AfterDawn Addict
|
2. August 2008 @ 14:23 |
Link to this message
|
got some scans for you guys. ;) messing with some of the "lesser" known media out there or less liked would better describe it. lol. :P
Pioneer 112D@ Pioneer 112L 8.25
IMGBURN @8x
MBIPG101R05 (Imation DVD+R 16x)
Sony/NEC/Optiarc AD-7200S
IMGBURN @8x
MBIPG101R05 (Imation DVD+R 16x)
...gm
|
