|
|
|
Error Burning with External DVD-Writer and USB2 (SCSI command aborted)
|
|
|
ccampbell
Senior Member
|
14. March 2005 @ 05:49 |
Link to this message
|
|
Hi Jrkn,
You should never rule out Microsoft as the cause. Lord knows they are the cause of so many other issues. But I do not have any contacts at Microsoft to properly get this looked into. And its' true these same drives have no troubles under Linux.
Regards,
Craig
Nero Inc
USA
|
|
Advertisement
|
 |
|
|
|
antihxr
Newbie
|
19. March 2005 @ 03:55 |
Link to this message
|
|
Hey guys, newbie here but with some info that might help. CyclerJim made mention of discovering he was connected to the web before he could have a sucessful burn. ypelchat killed processes to get it to burn right. Well, I was searching for info on a root kit (hacker tool) found on my pc that uses 'd347prt.sys'- which is a valid Micro$oft SCSI miniport driver- to hijack a machine invisibly using legitimate services and protocol. Maybe the SCSI errors are coming from the root kit trying to connect while you are trying to burn using a SCSI drive or a drive that utilizes a SCSI miniport (software-emulated interface for perhaps a USB drive). I burn with a Sony DVD+-R/RW with an IDE/ATA interface, so this condition doesnt affect my burning ability. However, my SCSI DVD-ROM drive hasnt worked right for a long time. I recommend anyone experiencing this condition do a Google search on root kits and the d347prt.sys file and try to find a virus scan software to repair the condition or learn how to identify and remove it manually. Just from what I've learned so far this runs DEEP. I used RKSHARK.EXE available from www.advances.com to discover the root kit on my machine but the free version wont remove it. I may be wayyy off base here, but you never can tell. If all else fails you should consider it. I'm going to swap out the DVD-ROM into a different pc and see if it works. Good luck to ya.
P.S. I burn Sony disks, rip with latest DVDecrypter to .ISO file, compress and back-up to .ISO with latest DVDShrink, mount image in D-Tools Daemon virtual DVD-ROM and burn with either DVDX-Copy, Veritas RecordNow or DVDecrypter. Burned hundreds this way, even the RPC protected ones I had trouble with. Hope some of this helps! :-)
This message has been edited since posting. Last time this message was edited on 19. March 2005 @ 04:18
|
|
D-503
Newbie
|
19. March 2005 @ 23:47 |
Link to this message
|
I recently bought a Zynet 5.25" USB 2.0 Enclosure and a LG GSA 4163B 16x Multi-Format Internal DVD Burner. I'm in Region 4 (Australia) and I'm trying to burn VCD and SVCD's (they are in .bin/.cue format) to CD-R. I've tried: Nero (it came with the drive), burnatonce (with ProDVD installed correctly), VCDEasy and none of them will do it. The only things I've had a successful burn with are Princo DVD-R's from DVD-9 back-ups using DVD Decypter and DVD Shrink (and burning with DVD Decrypter).
I've tried ForceASPI 1.7, ForceASPI 1.8 (which uses the latest Adaptec drivers because the .exe on the official site is a 16-bit application which won't run at all). I've tried the Nero ASPI layer also. I tried changing the name of the Nero ASPI layer and using only ForceASPI 1.7 or ForceASPI 1.8 and it wouldn't burn.
I've wasted so many CD-R's and a few DVD-R's too.
It seems the only why I'm gooing to be able to burn something is if the program can burn .bin/.cue images (I want to leave the chapters intact) without using Nero or those other programs above. Perhaps converting the .bin/.cue images to something else?
Or burn them to DVD (what one-click tool would do this?).
Here's the system I'm trying to burn on:
Toshiba Satellite 1130 Laptop
1.8ghz Intel Celeron (P4 Based) 1.8Ghz Mobile Processor
256mb DDR Ram
Windows XP Pro SP1 (Fully patched and updated)
Here is my Zynet 5.25" USB2.0 Enclosure
http://www.zynet.com.tw/download/DM/CD-R3.jpg
And manual: http://www.zynet.com.tw/download/manual/ee/cdr3u2.htm
There is only firmware for it for win98.
The burner I have once again is a LG GSA 4163B 16x Super Multi DVD/CD Rewriter.
I also upgraded the LG GSA 4163B to the latest Firmware, Version A103.
I also have an external 3.5" usb2 hard drive enclosure that runs fine so I already have the enhanced usb2 drivers.
It seems like I'm not the only one with this problem.
Like I said, I can burn DVD's using DVD Decypter and DVDShrink fine. It's just CD-R's I'm having trouble burning. Oh and don't even suggest installing SP2, that would be the last thing I'd do.
I just need some software or something that can burn .bin/.cue to CD-R with an External DVD Driver setup.
Or to burn VCD/SVCD to DVD with a minimum of fuss.
My other computer doesn't have the hard disk space (only has a 6.1gb drive) nor the CPU (an AMD K6-2 550) to handle DVD burning so I don't want to install the burner into it.
Please help. Lots of people are having this problem and it doesn't seem to be getting fixed.
|
|
D-503
Newbie
|
20. March 2005 @ 02:38 |
Link to this message
|
|
I had some success. I converted .bin/.cue to CloneCD format (.img/.ccd/.sub) with UltraISO 7.5.2.986 opened up CloneCD 5.1.0.0 clicked on "write image to disc" and put the speed at 8x. It did it's thing successfully and my standalone plays it as it should like it has chapters and everything. CloneCD uses it's own ASPI Layer, Elby something so that's probably why it works.
It would be good if we had a list of software that does work with External USB2.0 DVD-Writers (firewire too, if that doesn't work either).
I know these apparently seem to work:
Roxio Easy Media Creator
CloneCD (perhaps CloneDVD does too) (worked for me).
CopyToDVD (worked for someone else in this thread).
DVD Decrypter + DVDShrink (I was able to copy and burn several large DVD's to DVD-R with this combination.
It seems that software that uses it's own ASPI layer and not Nero seems to work. Some work with the system ASPI layer, some don't.
Could you please add what does and doesn't work for you in this thread please?
This message has been edited since posting. Last time this message was edited on 20. March 2005 @ 02:52
|
Moderator
|
21. March 2005 @ 09:50 |
Link to this message
|
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
Moderator
|
21. March 2005 @ 10:02 |
Link to this message
|
|
part of a reply i posted on another similar thread -
As for the Linux angle, very good call, i'd been pondering that side of things as i use Solaris for work and Linux as a sideline hobby. To me it just seems we're all almost blinkered (ie by looking at this in purely just the Microsoft world) in this whole enclosure issue and even though Linux may bring a lot of unknowns into the equation, it could also prove (for instance) that it's down to usb drivers or something.
My gut feeling from what i've read so far (i think there's a similar epic discussion going on over on cdrinfo or cdfreaks forums, can never remember where) is that it's a usb driver type thing so Linux comparisons could certainly go a long way to proving/disproving the power issues etc etc.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
D-503
Newbie
|
21. March 2005 @ 10:25 |
Link to this message
|
|
I think it's an ASPI Layer issue and how the program sends commands to the ASPI Layer.
But I won't know more until I get a DVD-RW and CD-RW and test with a bunch of software.
For now I know this:
DVD Decrypter 3.5.3.0 SPTI (Works)
Clone CD 5.1.0.0 using it's own ASPI Layer (Works)
Nero Express that comes with the burner which uses it's own ASP Layer (Doesn't work)
BurnAtOnce SPTI (Doesn't work)
VCDEasy SPTI (Doesn't work) VCDEasy latest Adaptec: ASPI (Doesn't work).
I'll have to test with the Adaptect 4.60 layer using forceaspi 1.7
My USB2 drivers are fully updated to the latest version.
My enclosure output uses 5V=2A and 12V=2A, from an input that can use a few different power sources but ours in Australia is 240V.
I will test with Win98SE partition as the enclosure has drivers for it.
This message has been edited since posting. Last time this message was edited on 21. March 2005 @ 10:27
|
|
rdpowell
Newbie
|
21. March 2005 @ 14:23 |
Link to this message
|
Hey Guys,
Ive racked my brains for weeks trying to work this one out.
And FINALLY heres what worked for me.
My enclosure came with a drivers disc which i only assumed was for win98 etc. as XP has auto detect etc. So i never bothered to install anything from it, well as a last resort, i put the disc into my laptop, installed the "USB STORAGE TOOLBOX" installer and WHALLA!
I cant believe it took me this damn long to do something as simple as installing the programs on the DISC that COMES with my external enclosure!
Since installing that disc, ive tried every combination with both Nero and dvdshrink, burning both image files as well as dvd movie files etc. and its been faultless!
I will be uploading the software to my personal webspace for anyone interested in downloading it and trying it out asap. and will link it here.
Im pretty sure its generic and shit if it helps even ONE person, we are one step closer to working out this issue.
Let me know if anyone wants it, and ill post the link for you to download.
Thanks.
Ryan
|
|
D-503
Newbie
|
21. March 2005 @ 14:31 |
Link to this message
|
|
Yeah could you please link it up along with the brand and model of your enclosure.
I have a few drivers for win98 on my disk too and not just for my model enclosure. So I could probably put them up aswell.
I'm going to try the same with mine.
|
|
D-503
Newbie
|
21. March 2005 @ 16:19 |
Link to this message
|
Ok I tried it and it installed the win98 drivers only for my enclosure most others said "works only on win98".
Now I've got a new folder in programs called USB Storage.
However I hasn't fixed my problem.
I did do something different and tried burning an Audio CD using mp3's to .cda method using Nero Express and it worked.
However it still won't burn any VCD images (SCSI command aborted) even if I convert them to .nrg format. Also burn at once doesn't work any better either.
So this is bizarre. Making an Audio CD with Nero Express works but burning a VCD image does not.
I'd try some more tests but the CD-R's I got are a friends and they are supposed to be for VCD's (which I can do with CloneCD).
I still don't think it's a usb or power issue, at least in my case. As some software works and others don't.
And in Nero's case burning an Audio CD works while burning a VCD image does not. Explain that one too me.
I'm thinking about taking my enclosure back along with the drive and just getting the LG External Drive.
|
|
rdpowell
Newbie
|
21. March 2005 @ 16:31 |
Link to this message
|
OK,
For all of you that wish to give it a go, heres the link to my site with a zip file containing my setup files for my USB enclosure.
http://web.aanet.com.au/ryanpowell/
It will create a new program folder called USB STORAGE TOOLBOX.
Im not claiming it will help ALL of you, but it certainly saved me alot of grief to the point where i was contemplating selling my DVD burner etc.
Im now burning with 100% success, no more coasters! haha
Goodluck guys!
Thanks
Ryan
This message has been edited since posting. Last time this message was edited on 21. March 2005 @ 16:34
|
|
D-503
Newbie
|
21. March 2005 @ 23:16 |
Link to this message
|
I installed it, it seems I have a new non-ms signed atapi drive in both ide controllers and the usb mass storage drive says "complete storage driver" or something instead of "Standard mass storage drive".
Does yours say the same? Otherwise it could've been me trying to install stuff from a disc I got with another enclosure.
My problem is still there. I can't burn chaptered VCD or SVCD in .bin/.cue, .nrg or .iso format. With Nero Express or Burnatonce. I haven't tried burning any DVD's yet.
However I am able to burn audio cd's and data cd's.
I found a cd-rw disc (Nero Express and Burnatonce will both erase it which is ironic). I'd try and make a VCD and SVCD with just the mpeg file (which I can extract with VCDGear). Would be good if burnatonce worked because it pretty much does everything Nero Express does. I might try making a data cd and audio cd in that burnatonce aswell to see if it's only with VCD and SVCD images like in Nero Express that it has burning problems with.
CloneCD can burn images either if I convert them to it's format with UltraISO or mount the image with Daemon Tools.
So looks like I can pretty much do what everyone else can with their burners, I'll just have to use different programs for VCD and SVCD images.
It's not a fix but it'll do until some new software comes out that solves the problem or current software is fixed. I'll do more tests and then post all the logs to the burnatonce forums.
I don't know if this usb driver has helped me to burn audio and data cd's with Nero, as I hadn't tried them before. It doesn't seem to have hurt though.
Strange that I can only burn certain things with certain programs.
|
|
omega_wkd
Suspended due to non-functional email address
|
22. March 2005 @ 04:43 |
Link to this message
|
Hi all, I've been following this thread. I bought a gericom external DVD writer. I believe that the root of all the problems is software.
Here we go;
Now before re-installing XP I couldn't burn CD's at all (it would hang at/before or shortly after lead in), DVD-R (burned at least 7 costers and 2 decent DVD movie) haven't tried DVD+R yet.
NOW
Re-installed windowsXP, patched to SP2, installed Nero OEM (Apart from McAfee Security this is all I installed)
What happens, I can burn CD and DVD without a hitch at all. Nothing wrong whatsoever. Then I install Alcohol 120% (latest version) and bang, downhill, same problem.
So i went fishing and it turns out alc uses it's own aspi interface (as do most software). I told it to use the system installed aspi. CDs now burn but still a problem with DVDs (hangs half way).
It is obvious that there is a conflict (either with Nero or alc [they obviously don't get along] or files get written over etc.]
I reckon it's not a windowsXP problem [If only that was true all the time, windows eh] because the built in XP burning software works perfectly in this situation.
I'm going home now to install the update to Nero and if that fails, take the writer out of the encloser and put it into the tower and see if that fixes the problem, i'll let ya know.
|
|
delta1562
Newbie
|
22. March 2005 @ 20:59 |
Link to this message
|
hi all well i did what you all said . and it works ive just burnt a dvd .. on usb 2 will keep trying today and will update you all this week .. im, running Nero and a pioneer 109 dvdr external . the external box is a sweex usb 2 thanx to you all and i hope it keeps going bbfn dave
|
|
jtdc
Newbie
|
23. March 2005 @ 00:15 |
Link to this message
|
|
for folks here having problems with USB 2.0 Cardbus with NEC based chipset having problems on writing to an external USB connected CD/DVD writer, you may use this latest USB 2.0 driver, it helped in my case, its already version 2.1.11.1, usual ones are lower than this.
ftp://ftp.winfast.com.tw/mb/K8N/USB20/K8Nx_USB2.0_V2_1_11_1.exe
|
|
ljsilver
Suspended due to non-functional email address
|
24. March 2005 @ 21:36 |
Link to this message
|
I Guess i am the lates to get hit by the SCSI command aborted error.
Everything was working perfectly till today. Now i have 12 useless DVDS in one hour till i founf this.
Simulation does not work for me with Nero 6.6.0.8. It asks for a DVD and it stops burning after a while.
The whole log file is attached.
Some Facts:
WINDOWS XP WITH SP2
1. HP DVD writer 630e. It is a USB 2.0 external writer.
http://h10025.www1.hp.com/ewfrf/wc/product?product=432775&lc=en&cc=us&dlc=en&lang=en&cc=us
2. PCMCIA Card in my notebook. IOGEAR.
http://www.iogear.com/main.php?loc=product&Item=GUF202
I am using the usb 2.0 port in this card bus.
3. Notebook Compaq Presario 735CA
http://h10025.www1.hp.com/ewfrf/wc/softwareList?lc=en&lang=en&cc=ca&dlc=en&product=95634&os=228
4. DVD + R from Kodak . Made in Taiwan. 8x speed
======================================================
NERO PING
=====================================================
NeroPing V1.10
Initialize Win Aspi32........Ok
Start scanning device.....
Host Adapter = 0
[Target ID = 0] 'FUJITSU MHR2020AT 53B9 '
Host Adapter = 1
[Target ID = 0] 'TEAC DW-28E A.0B '
Host Adapter = 2
[Target ID = 0] 'Maxtor 6 Y080L0 .0.0 '
[Target ID = 1] 'HP DVD Writer 630c CH16 '
Finish scanning..............Ok
=======================================================
STEPS TAKEN TO RESOLVE THIS PROBLEM
======================================================
1. Reinstalled Nero
2. Tried burning DVDs with sonic. The DVDs do not burn and stop in about 3 minutes.
3. checked my hard for errors and fixed them , if any.
=======================================================
Can anyone help me in fixing this , though i doubt it can be fixed.
I will be installing Red Hat Linux Enterprise edition and then burn the DVD + R i have. Will post the results here again.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <HP DVD Writer 630c> Version: CH16 - HA 2 TA 1 - 6.6.0.8
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TEAC DW-28E >Version: A.0B - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHR2020AT atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TEAC DW-28E atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
TEAC DW-28E E: CDRom0
HP DVD Writer 630c D: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 38797312 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 239MB (245228kB)
Free physical memory: 14MB (14836kB)
Memory in use : 93 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
24.3.2005
ISO compilation
8:34:24 PM #1 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
8:34:24 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
8:34:24 PM #3 Text 0 File Writer.cpp, Line 122
Writer HP DVD Writer 630c running
8:34:24 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
8:34:28 PM #5 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media
8:34:28 PM #6 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1998175 (444:02.25, 3902MB)
8:34:28 PM #7 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)
8:34:28 PM #8 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: HP DVD Writer 630c, Media type: DVD+R
8:34:28 PM #9 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:34:28 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1998176 (1998176) = #1998176/444:2.26
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1998176 blocks [HP DVD Writer 630c]
--------------------------------------------------------------
8:34:28 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HP DVD Writer 630c] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4092264448, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1998176 | lead-out | 1 | 0x41 | 0x00
8:34:29 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
8:35:35 PM #13 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.
8:35:36 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
8:35:37 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)
8:35:39 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:35:39 PM #17 SCSI -1066 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x03816600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00
8:35:39 PM #18 Text 0 File DVDPlusRW.cpp, Line 638
Start write address at LBA 0
DVD high compatibility mode: Yes
8:37:06 PM #19 SCSI -500 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x083C0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x01 0xB5 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
8:37:07 PM #20 SCSI -500 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x08F50600
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x01 0xB5 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
8:37:07 PM #21 Text 0 File Mmc.cpp, Line 18866
Writer-Buffer for HP DVD Writer 630c\H2 T1 reduced to 32768Bytes
8:37:09 PM #22 SCSI -500 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x08F50600
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x01 0xB5 0x00 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
8:37:09 PM #23 CDR -500 File Writer.cpp, Line 311
SCSI command aborted
HP DVD Writer 630c\H2 T1
8:37:10 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
8:37:10 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
8:37:12 PM #26 SCSI -1114 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 2, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x29 0x00
8:37:12 PM #27 SCSI -1033 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 2, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x04 0x01
8:37:12 PM #28 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
8:37:29 PM #29 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
8:37:29 PM #30 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 12/20/2004 1:37:14 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 7:00:00 AM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
delta1562
Newbie
|
25. March 2005 @ 23:00 |
Link to this message
|
|
update for you all well i burnt 1 dvd that was it still can,t burn a dvd talk to you all later dave
|
|
BTFSB
Junior Member
|
26. March 2005 @ 19:38 |
Link to this message
|
|
Forget all about the SCSI discussions and the real and only answer to the USB DVD writer problems everyone has encountered is relatively simple to explain. When using USB devices, there is NO WAY to reserve additional bandwidth for the external burners which is why most of us have many USB devices installed and have this problem. The simplest solution is to create a new profile and disable those devices that you will not need when burning or simply unplug them from your system. The extra profile is for Windows XP users and those of us familiar with using additional profiles. If you are unfamiliar with profile creation please refer to Microsoft's knowledge base for the steps necessary. Any number of USB devices consume power and bandwidth and unfortunately USB does have limitations although the manufactureres would lead you to beleive otherwise. Think of it this way, turn on all the lights in your house and watch the electric meter spin faster. As with USB devices it is highly recommend placing your DVD writer on USB port number ONE. So to recapp the solution, unplug unnecessary USB devices while burning or simply create a seperate profile and disable those devices not imperative to the operation of Windows. Problem solved!
|
|
nklz
Newbie
|
27. March 2005 @ 02:10 |
Link to this message
|
|
If only it was that simple. Even on a clean install of win XP with nothing but the dvd-writer connected, I got the error. Putting it in the first usb port does not seem to do anything for me - i have even tried the usb ports on the front of pc-case.
I am not saying your solution will not work - it just did not for me.
With that said, my problem seem to have miraculously solved itself. I am actually not sure why it works all of a sudden. I have been burning on usb port for several months now. I think it has something to do with updating my windows usb drivers(via), but as I said I´m not really sure.
I would not be surprised if your suggestion will solve the problem for some. But in my experience there is no universal solution that actually works for everyone encountering this problem.
If the problem was with the usb channel's bandwidth, wouldnt that rather cause a buffer underrun, than being completely unable to burn?
|
|
D-503
Newbie
|
27. March 2005 @ 06:29 |
Link to this message
|
|
Has anyone tried burning with their External Enclosed USB2 Drive with Linux?
If I knew how I'd make a Live Linux CD primarily for burning on these drives.
I wonder if people have more success with Linux than WinXP with these drive setups.
|
Moderator
|
27. March 2005 @ 08:27 |
Link to this message
|
|
i haven't used mine under Linux, but i do use both my Belkin enclosures without incident under win2000. have used my Sony DRU-700A thru usb2 under 3 different machines using Win2000. Use a 20GB ATA100 drive under usb2 under Win2000 and constantly use my LG 4480B CD Burner/dvd reader for ALL my many 100s of ripped dvd's, ie i rip nearly every single movie thru this enclosure under usb2
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
compy168
Junior Member
|
27. March 2005 @ 18:09 |
Link to this message
|
Hi,
I need help. I have a IBM T40 and an external Sony DRU-510UL DVD+/-RW Drive. It used to be working fine before. Then few days ago, the buffer level goes up and down while burning with Nero. I have defrag my hard drive. Check the hard drive is in DMA mode. And uninstall all of the USB driver and reinstall with the latest ones (built-in from Window 2000 SP4). It is still the same. It takes 1.5 hrs to burn a DVD now. Sometimes it will failed with Ritek DVD-R. Below is the log. Pls help!
Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 3:06:00 AM
ahead WinASPI: File 'D:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero version: 6.6.0.5
Recorder: <SONY DVD RW DRU-510A> Version: 1.1a - HA 2 TA 1 - 6.6.0.5
Adapter driver: <> HA 2
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <MATSHITA UJDA745 DVD/CDRW>Version: 1.02 - HA 1 TA 0 - 6.6.0.5
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC25N040ATCS05-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA UJDA745 DVD/CDRW atapi Port 1 ID 0 DMA: Off
=== CDRom-Device-Map ===
MATSHITA UJDA745 DVD/CDR Z: CDRom0
SONY DVD RW DRU-510A E: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (523184kB)
Free physical memory: 101MB (103648kB)
Memory in use : 80 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
27.3.2005
UDF/ISO compilation
7:37:17 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
7:37:17 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
7:37:17 PM #3 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
7:37:17 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
7:37:17 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
7:37:17 PM #6 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-510A running
7:37:17 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
7:37:17 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
7:37:17 PM #9 Text 0 File Burncd.cpp, Line 3155
Turn on Disc-at-once, using DVD media
7:37:18 PM #10 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2253481 (500:46.31, 4401MB)
7:37:18 PM #11 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD)
7:37:18 PM #12 Text 0 File DlgWaitCD.cpp, Line 2310
Recorder: SONY DVD RW DRU-510A, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193
7:37:18 PM #13 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:37:18 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2253632 (2253632) = #2253632/500:48.32
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2253632 blocks [SONY DVD RW DRU-510A]
--------------------------------------------------------------
7:37:18 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [SONY DVD RW DRU-510A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4615438336, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2253632 | lead-out | 1 | 0x41 | 0x00
7:37:18 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
7:37:19 PM #17 Text 0 File Burncd.cpp, Line 4042
Cache writing successful.
7:37:19 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
7:37:19 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
7:37:19 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:37:19 PM #21 Text 0 File DVDR.cpp, Line 2260
Recording mode: Sequential Recording Mode for Multisession
7:37:19 PM #22 Text 0 File Mmc.cpp, Line 21060
Set BUFE: Power-Burn -> ON
7:37:19 PM #23 Text 0 File DVDR.cpp, Line 2401
Start write address at LBA 0
DVD high compatibility mode: No
7:37:19 PM #24 Text 0 File Cdrdrv.cpp, Line 8332
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
7:45:29 PM #25 SCSI -1135 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x0A1C0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x08
CDB Data: 0x2A 0x00 0x00 0x03 0x30 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x03 0x27 0x90 0x12
0x00 0x00 0x00 0x00 0x0C 0x08
7:45:29 PM #26 CDR -1135 File Writer.cpp, Line 311
Write error
7:45:29 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:45:29 PM #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
7:45:29 PM #29 Text 0 File DVDR.cpp, Line 2642
EndDAO: Last written address was 208991
7:45:29 PM #30 Phase 133 File dlgbrnst.cpp, Line 1832
Writing short lead-out
7:45:29 PM #31 SCSI -1023 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 2, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x2C 0x00
7:45:29 PM #32 SCSI -1023 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 2, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x2C 0x00
7:45:29 PM #33 CDR -1023 File WriterStatus.cpp, Line 167
Command sequence error
7:45:29 PM #34 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
7:45:29 PM #35 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.10a, size=64432 bytes, created 6/19/2003 11:05:04 AM
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 7/21/2004 10:30:41 PM
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 7/21/2004 10:30:41 PM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 3:06:00 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 2/28/2004 7:32:36 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 6/19/2003 12:05:04 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
D-503
Newbie
|
27. March 2005 @ 19:41 |
Link to this message
|
Your best bet is to get in touch with Ahead, makers of Nero and post them your log. It means nothing to most people here. It only means something to programmers and since Ahead programmed Nero, they would be able to make more sense of it than anyone else.
We're talking about problems with Internal drives in External Enclosures. Not External Drives.
|
|
rdpowell
Newbie
|
27. March 2005 @ 19:53 |
Link to this message
|
PROVEN solution...
1. Update to Latest NERO
2. Install FORCEaspi
3. Install any installation files on CD supplied with your external case (mine found here if you need one http://www.ammoteen.tk)
THEN finally this is the MOST IMPORTANT step :-
4. Go To > MY COMPUTER > Find your new external drive > RIGHT CLICK > PROPERTIES > RECORDING TAB > TICK enable recording on this drive. ***IMPORTANT!*** you may have to check this every time you connect your burner or on startup.
THIS has been proven to work successfully for many people on this forum.
Good Luck
Ryan
|
|
Advertisement
|
|
|
Moderator
|
27. March 2005 @ 20:46 |
Link to this message
|
|
d-503, there are lots of ppl on this very
forum who can decode the Nero errors, i find
their info v helpful as i don't always see
what to look for myself (i don't have nero
probs but like to keep an eye on the errors so
many ppl get in case i do ever run into
probs).
rdpowell - good tip, but that'll only work in
XP, not everyone (granted, most are i think)
in this thread using XP
but good work fellas, keep beavering away, i'm
avidly watching this thread incase i ever need
to buy new enclosure
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 29. March 2005 @ 21:44
|
|
