Mobile/PDA About Us Advertise here
User User name Password  
  Not registered yet? Register here.
Lost your password? Click here. 		 
  Home   News   Guides   Downloads   Glossary   Hardware   Profiles   Forums   v4  
 Advertise at AfterDawn.com     Link to us!     Private messages     Compose a private message     List of all updated threads     Threads without replies     Search messages
Tuesday 7.10.2025 / 09:37
Search AfterDawn Forums:        In English   Suomeksi   Pĺ svenska
afterdawn.com > forums > dvd±r discussion > dvd±r for advanced users > nero problem help please
Show topics
 
Forums
Forums
nero problem help please
  Jump to:
 
Posted Message
Page:< Previous12
pulsar
AfterDawn Addict
_ 		11. April 2005 @ 11:43 _ Link to this message    Send private message to this user   
In the post above mine, he states that he cannot get DMA to go on. I was referring to Illin07s' post. You were referring to your own!

Perhaps I was at crossed purposes.

I don't really care for pedants! I was just trying to help with the DMA prob.
Is your DMA on in your BIOS Illin07?


Pulsar
[ + quote]
Gif by Phantom69


This message has been edited since posting. Last time this message was edited on 11. April 2005 @ 11:46
Advertisement
_ 		__
creaky
Moderator
_ 		11. April 2005 @ 11:47 _ Link to this message    Send private message to this user   
@pulsar - quite right, sorry, sometimes my jokes are mistimed, especially when i've only half-read a reply. Comes from doing Unix all day, i try to be human after work, i should pay attention more !
[ + quote]


Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
pulsar
AfterDawn Addict
_ 		11. April 2005 @ 11:48 _ Link to this message    Send private message to this user   
No worries, mate! I can get rather testy at times!!!

Kind regards,

Pulsar
[ + quote]
Gif by Phantom69


Illini07
Suspended due to non-functional email address
_ 		11. April 2005 @ 13:25 _ Link to this message    Send private message to this user   
i went into my BIOS and the LTP port DMA was default set to off. there were 2 other options DMA 1 or DMA 3. i set it to DMA 1 and it still wouldnt switch to DMA under properties. i'm going to try DMA 3 now and will notify if it works or not. if not, any other suggestions?
[ + quote]
pulsar
AfterDawn Addict
_ 		11. April 2005 @ 13:29 _ Link to this message    Send private message to this user   
In my BIOS the DMA is in the integrated peripherals section. BIOSs are different. Have a play about & let us know how you get on.

Pulsar
[ + quote]
Gif by Phantom69


bbmayo
AfterDawn Addict
_ 		11. April 2005 @ 13:29 _ Link to this message    Send private message to this user   
CD-ROM and DVD-ROM drives can revert to using PIO mode, despite being set to use "DMA if Available." Here's how to make Windows XP redetect the DMA capabilities of the drives.

This behaviour occurs with the following conditions:

-Windows XP is the operating system (should be same for 2K)
-A CD-ROM or DVD-ROM drive, which is known to support DMA mode now works only in PIO mode.
-The drive controller is set to use "DMA if available" but reports to be only in PIO mode.

Following is the mechanism that has worked for me, please try it at your own risk, it involves hacking the registry:

1. Open RegEdit
2. Find the following KEY:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\ Class\{4D36E96A-E325-11CE-BFC1-08002BE10318}\000x
3. The last four digits will be 0000, 0001, 0002, 0003, and so on.
4. Under each key, delete all occurences of the following values:
MasterIdDataChecksum
SlaveIdDataChecksum
5. Reboot the computer. Windows will now redetect DMA settings.

[ + quote]


My Guides--------->http://webpages.charter.net/bacitup/
Newbies------------>http://forums.afterdawn.com/thread_view.cfm/183136
Software ------->http://webpages.charter.net/bacitup/software.htm
pulsar
AfterDawn Addict
_ 		11. April 2005 @ 13:31 _ Link to this message    Send private message to this user   
Thanks for that BB, I've not had many probs with DMA, so my knowledge is rather limited. I'm glad that you took the time out to help, cheers mate!

Pulsar
[ + quote]
Gif by Phantom69


Illini07
Suspended due to non-functional email address
_ 		11. April 2005 @ 13:34 _ Link to this message    Send private message to this user   
idk what is going on with my computer, but i just realized that when i go into device manager under the IDE "tab" i dont have Primary and Secondary IDE Channel, i have 2 that say Primary. under advance tab of the first one it says device 0 is ultra DMA mode 5 and device 1 is DMA not applicable. then, the second primary advance tab says that device 0 is Ultra DMA mode 2 and device 1 is default PIO. where did i go wrong and mess this up? and how do i fix it? i feel so stupid because i never had this many problems with my old computer. thanks again, i'd be in the dark if it weren't for great people like you.
[ + quote]
bbmayo
AfterDawn Addict
_ 		11. April 2005 @ 13:44 _ Link to this message    Send private message to this user   
Just delete them all and reboot. Windows should detect and install them properly for you..
[ + quote]


My Guides--------->http://webpages.charter.net/bacitup/
Newbies------------>http://forums.afterdawn.com/thread_view.cfm/183136
Software ------->http://webpages.charter.net/bacitup/software.htm
Illini07
Suspended due to non-functional email address
_ 		11. April 2005 @ 14:30 _ Link to this message    Send private message to this user   
i deleted both, and restarted and it still didnt come up as DMA...
[ + quote]
icecoled
Newbie
_ 		11. April 2005 @ 15:25 _ Link to this message    Send private message to this user   
ok creaky heres my history in the next post
[ + quote]
"you know it things go well tonight I might be showing her my O-face"
icecoled
Newbie
_ 		11. April 2005 @ 15:31 _ Link to this message    Send private message to this user   
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 12/22/1997 6:23:24 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero Version: 6.6.0.8
Recorder: <ATAPI DVD DUAL 4XMax> Version: 2.17 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <ATAPI DVD-ROM 16XMax >Version: 1.20 - HA 1 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3160023A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVD DUAL 4XMax atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ATAPI DVD-ROM 16XMax atapi Port 1 ID 1 DMA: On
: epstw2k Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
ATAPI DVD DUAL 4XMax D: CDRom0
ATAPI DVD-ROM 16XMax E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 296MB (303720kB)
Memory in use : 42 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)

2.4.2005
UDF/ISO compilation
2:33:30 PM #1 SCSI -1046 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x00

2:33:30 PM #2 SCSI -1046 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x00

2:33:30 PM #3 SCSI -1046 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x00

2:33:30 PM #4 SCSI -1046 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x00

2:33:30 PM #5 SCSI -1046 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x00

2:35:35 PM #6 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

2:35:36 PM #7 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

2:35:36 PM #8 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

2:35:36 PM #9 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

2:35:36 PM #10 Text 0 File Reader.cpp, Line 127
Reader running

2:35:36 PM #11 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

2:35:36 PM #12 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

2:35:36 PM #13 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

2:36:06 PM #14 SCSI -1046 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x00

2:36:07 PM #15 SCSI -1046 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x00

2:36:07 PM #16 SCSI -1046 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x1B 0x01 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x00

2:36:07 PM #17 SCSI -1046 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x00

2:36:07 PM #18 SCSI -1046 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x1B 0x01 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x00

2:36:09 PM #19 SCSI -1046 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x00

2:36:09 PM #20 SCSI -1046 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x1B 0x01 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x00

2:36:09 PM #21 SCSI -1046 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x00

2:36:09 PM #22 SCSI -1046 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x1B 0x01 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x00

2:36:11 PM #23 SCSI -1046 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x00

2:36:11 PM #24 SCSI -1046 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x1B 0x01 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x00

2:36:11 PM #25 SCSI -1046 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x00

2:36:11 PM #26 SCSI -1046 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x1B 0x01 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x00

2:36:13 PM #27 SCSI -1046 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x00

2:36:13 PM #28 SCSI -1046 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x1B 0x01 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x00

2:36:13 PM #29 SCSI -1046 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x00

2:36:13 PM #30 SCSI -1046 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x1B 0x01 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x00

2:36:15 PM #31 SCSI -1046 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x00

2:36:15 PM #32 SCSI -1046 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x1B 0x01 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x00

2:36:15 PM #33 SCSI -1046 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x00

2:36:15 PM #34 SCSI -1046 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x1B 0x01 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x00

2:36:17 PM #35 SCSI -1046 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x00

2:36:17 PM #36 SCSI -1046 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x1B 0x01 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x00

2:36:17 PM #37 SCSI -1046 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x00

2:36:17 PM #38 SCSI -1046 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x1B 0x01 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x00

2:36:18 PM #39 Phase 40 File dlgbrnst.cpp, Line 1832
Aborted by user

2:36:18 PM #40 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)

2:36:18 PM #41 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: ATAPI DVD DUAL 4XMax, Media type: DVD-ROM

2:36:18 PM #42 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Recorder does not support required medium type.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 12/22/1997 7:02:46 PM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 3/2/2005 6:35:03 PM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 5/19/2004 12:33:44 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 12/22/1997 6:23:24 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero Version: 6.6.0.8
Recorder: <ATAPI DVD DUAL 4XMax> Version: 2.17 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <ATAPI DVD-ROM 16XMax >Version: 1.20 - HA 1 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3160023A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVD DUAL 4XMax atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ATAPI DVD-ROM 16XMax atapi Port 1 ID 1 DMA: On
: epstw2k Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
ATAPI DVD DUAL 4XMax D: CDRom0
ATAPI DVD-ROM 16XMax E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 211MB (216136kB)
Memory in use : 58 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)

2.4.2005
UDF/ISO compilation
8:37:34 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

8:37:35 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

8:37:35 PM #3 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

8:37:35 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

8:37:35 PM #5 Text 0 File Reader.cpp, Line 127
Reader running

8:37:35 PM #6 Text 0 File Writer.cpp, Line 122
Writer ATAPI DVD DUAL 4XMax running

8:37:35 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

8:37:35 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

8:37:35 PM #9 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

8:37:35 PM #10 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 2218831 (493:04.31, 4333MB)

8:37:35 PM #11 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)

8:37:35 PM #12 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: ATAPI DVD DUAL 4XMax, Media type: DVD-R
Disc Manufacturer: MCC 01 - RG20
Disc Application Code: 64, Disc Physical Code: 193

8:37:35 PM #13 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================

8:37:35 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2218832 (2218832) = #2218832/493:4.32
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2218832 blocks [ATAPI DVD DUAL 4XMax]
--------------------------------------------------------------

8:37:36 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [ATAPI DVD DUAL 4XMax] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4544167936, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2218832 | lead-out | 1 | 0x41 | 0x00

8:37:36 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

8:37:36 PM #17 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

8:37:36 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

8:37:36 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)

8:37:36 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

8:37:36 PM #21 Text 0 File DVDR.cpp, Line 2194
Recording mode: Sequential Recording Mode

8:37:36 PM #22 Text 0 File Mmc.cpp, Line 21235
Set BUFE: BURN-Proof -> ON

8:37:36 PM #23 Text 0 File DVDR.cpp, Line 2340
Start write address at LBA 0
DVD high compatibility mode: Yes

8:37:36 PM #24 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

8:51:52 PM #25 Text 0 File WriterStatus.cpp, Line 116
<ATAPI DVD DUAL 4XMax > start writing Lead-Out at LBA 2218832 (21DB50h), lenght 0 blocks

8:51:52 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

8:51:53 PM #27 Text 0 File DVDR.cpp, Line 2603
EndDAO: Last written address was 2218831

8:52:29 PM #28 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5,540 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 12/22/1997 7:02:46 PM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 3/2/2005 6:35:03 PM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 5/19/2004 12:33:44 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)

)

====== *** Nero-Burning Rom, History File *** ======


Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 12/22/1997 7:23:24 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.8
Recorder: <ATAPI DVD DUAL 4XMax> Version: 2.17 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <ATAPI DVD-ROM 16XMax >Version: 1.20 - HA 1 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3160023A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVD DUAL 4XMax atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ATAPI DVD-ROM 16XMax atapi Port 1 ID 1 DMA: On
: epstw2k Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
ATAPI DVD DUAL 4XMax D: CDRom0
ATAPI DVD-ROM 16XMax E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 224MB (230336kB)
Memory in use : 56 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)

9.4.2005
UDF/ISO compilation
1:32:53 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

1:32:54 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

1:32:54 PM #3 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

1:32:54 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

1:32:54 PM #5 Text 0 File Reader.cpp, Line 127
Reader running

1:32:54 PM #6 Text 0 File Writer.cpp, Line 122
Writer ATAPI DVD DUAL 4XMax running

1:32:54 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

1:32:54 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

1:32:54 PM #9 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

1:32:54 PM #10 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 2149711 (477:42.61, 4198MB)

1:32:54 PM #11 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)

1:32:54 PM #12 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: ATAPI DVD DUAL 4XMax, Media type: DVD-R
Disc Manufacturer: MCC 01 - RG20
Disc Application Code: 64, Disc Physical Code: 193

1:32:54 PM #13 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================

1:32:54 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2149712 (2149712) = #2149712/477:42.62
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2149712 blocks [ATAPI DVD DUAL 4XMax]
--------------------------------------------------------------

1:32:54 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [ATAPI DVD DUAL 4XMax] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4402610176, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2149712 | lead-out | 1 | 0x41 | 0x00

1:32:54 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

1:32:55 PM #17 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

1:32:55 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

1:32:55 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)

1:32:55 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

1:32:55 PM #21 Text 0 File DVDR.cpp, Line 2194
Recording mode: Sequential Recording Mode

1:32:55 PM #22 Text 0 File Mmc.cpp, Line 21235
Set BUFE: BURN-Proof -> ON

1:32:55 PM #23 Text 0 File DVDR.cpp, Line 2340
Start write address at LBA 0
DVD high compatibility mode: Yes

1:32:55 PM #24 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

1:46:38 PM #25 Text 0 File WriterStatus.cpp, Line 116
<ATAPI DVD DUAL 4XMax > start writing Lead-Out at LBA 2149712 (20CD50h), lenght 0 blocks

1:46:38 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

1:46:39 PM #27 Text 0 File DVDR.cpp, Line 2603
EndDAO: Last written address was 2149711

1:47:15 PM #28 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5,540 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 12/22/1997 8:02:46 PM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 3/2/2005 7:35:03 PM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 5/19/2004 1:33:44 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 11:59:44 PM (Adapter driver for rec)



heres my history creaky tell me what u think the last burn i did worked but the past few havent
[ + quote]
"you know it things go well tonight I might be showing her my O-face"
creaky
Moderator
_ 		11. April 2005 @ 22:52 _ Link to this message    Send private message to this user   
@icecoled - The first burn in your log of last 3 burns eventually went south -
Quote:
2:36:17 PM #38 SCSI -1046 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x1B 0x01 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x00
- i pasted one paragraph of this 'error bunch'. there's quite a few occurrences of this...hmmm...

Quote:
2:36:18 PM #41 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: ATAPI DVD DUAL 4XMax, Media type: DVD-ROM
Quote:
Recorder does not support required medium type.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)
- hmmm, you've mistakenly put in a dvd-rom disc, or maybe a written-to dvd.




The last 2 burns seemed to have worked ok -
Quote:
Recorder: ATAPI DVD DUAL 4XMax, Media type: DVD-R
Disc Manufacturer: MCC 01 - RG20
- http://www.videohelp.com/dvdmedia.php?dvdmediasearch=&dvdmediadvdridsearch=MCC+01&type=6&size=All&dvdburnspeed=4&order=Name&hits=25&search=Search+or+List+Media

- good media code - a few makers use this code though, what's the name on the disc ? -
[ + quote]


Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
Advertisement
_ 		__
 
_
icecoled
Newbie
_ 		12. April 2005 @ 13:55 _ Link to this message    Send private message to this user   
no it wasent a used dvd or a dvd-rom just DVD-R i looked on the web site u posted but didnt know what i was looking for. i am using just a Verbatim DVD-R datalife 1x-4x 4.7GB 120 min, not a datalife plus. Its just a 50 pack i got at Sams Club. But, ive started to notice a pattern with this dvd burning ill boot up my comp try to burn the disc and it gives me the error i talked about in my first post. Then i put in a backed up DVD-R verbatim disc of any movie watch it for a few seconds then stop the movie. Ill take the disc out of my drive put in a blank DVD-R and it starts up Nero. like presto im thinkin its my drives havin troble reading the DVD-R discs or something
[ + quote]
"you know it things go well tonight I might be showing her my O-face"
 
Page:< Previous12
Related links
Download Nero from here.
How to burn DVDs with Nero? Read our guide from here.
Support AfterDawn and purchase your copy of Nero from here!
 
Related forum topics Posts Last post Forum room
My Nero 6 OEM not compatable with Windows 8.1 4 2. June 2014 Windows - Software discussion
nero 2014 3 24. May 2014 Nero discussion
need to download Nero 9 5 9. May 2014 Nero discussion
read errors on disc verify in nero 12 2 3. May 2014 Nero discussion
I lose sound when I join files on Nero 12 Platinum? 9 29. April 2014 Nero discussion
Nero 12 activation 3 15. January 2014 Nero discussion
Help with NERO burning BluRay 2 22. December 2013 Nero discussion
DVD-DL Media keeps failing with Nero Platinum 12 6 7. December 2013 Nero discussion
A better way to burn Blu Ray disks...than using Nero! 3 30. October 2013 Blu-ray
which version of Nero to get for windows 7 OS ?? 2 26. October 2013 Nero discussion

 
afterdawn.com > forums > dvd±r discussion > dvd±r for advanced users > nero problem help please
 

Digital video: AfterDawn.com | AfterDawn Forums
Music: MP3Lizard.com
Gaming: Blasteroids.com | Blasteroids Forums | Compare game prices
Software: Software downloads
Blogs: User profile pages
RSS feeds: AfterDawn.com News | Software updates | AfterDawn Forums
International: AfterDawn in Finnish | AfterDawn in Swedish | AfterDawn in Norwegian | download.fi
Navigate: Search | Site map
About us: About AfterDawn Ltd | Advertise on our sites | Rules, Restrictions, Legal disclaimer & Privacy policy
Contact us: Send feedback | Contact our media sales team
 
  © 1999-2025 by AfterDawn Ltd.

  IDG TechNetwork