Nero Error - illegal disk - Please Help [page 10/13]

AfterDawn.com

Mobile/PDA About Us Advertise here


		User name	Password

		Not registered yet? Register here. Lost your password? Click here.

Advertise at AfterDawn.com

Link to us!

Private messages

Compose a private message

List of all updated threads

Threads without replies

Search messages

Wednesday 25.2.2026 / 12:48

Search AfterDawn Forums:

In English

Suomeksi

På svenska

afterdawn.com > forums > software specific discussion > nero discussion > nero error - illegal disk - please help

Browse by topic

Forums

Forums

Start a new thread

Nero Error - illegal disk - Please Help

Jump to:

Posted

Message

Page:	<< First	< Previous ...	6	7	8	9	10	11	12	13	Next >

Moderator

23. March 2006 @ 08:42

Link to this message

@jmox -

edit- LOCOENG pipped me to the post :)
i had made the same recommendation for the firmware to install, initially. however i found a post stating that BGS4 was OEM firmware. As LOCOENG and me have given different firmware info, can you confirm if the burner is a proper Lite-on driver or did you get the burner thrown in with the PC (if so what make is the PC, helps us pinpoint the firmware needed).

Quote:
I just switched to 16X discs

- see further down my comments, your firmware is recognising the discs fine
Thanks.

Quote:
Nero API version: 6.3.1.17

- even though it looks like Nero isn't causing you problems, your version's quite old, update to the latest decent 6.x version from eithere of these links -
http://httpdl1.usw.nero.com/Nero-6.6.0.18.exe
http://httpdl2.usw.nero.com/Nero-6.6.0.18.exe (don't install 6.6.1.4 as that's causing a lot of grief for a lot of ppl).

Quote:
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BGS4

- i've just been reading that this is an OEM version of the Lite-on drive which means you can't use normal lite-on firmware. BGS4 seems to be up to date anyway

Quote:
Physical memory : 382MB (391664kB)
Free physical memory: 82MB (84308kB)
Memory in use : 78 %

- you have virtually no free memory left, and only 384MB to start with. you need to close down more programs prior to ALL dvd work/burning to ensure more free memory

Quote:
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193

- very nice discs and the fact that there's 3 lines listed here with media info (MCC = Mitsubishi Chemical Company) your firmware's up to date enough to recognise the discs

Quote:
Illegal disc

Invalid field in command

- follow all my tweaks

Quote:
Existing drivers:

- your ATAPI drivers are supposed to be listed in this section, fix by following this - http://home.comcast.net/~bbmayo/FAQ.htm

Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***

This message has been edited since posting. Last time this message was edited on 23. March 2006 @ 08:47

Advertisement

paris1900

Newbie

23. March 2006 @ 13:03

Link to this message

sorry...let's try this again...below is my burn log

thanks

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 11:35:32 AM
Nero Version: 6.6.0.17
Internal Version: 6, 6, 0, 17c
(Nero Express)
Recorder: <LITE-ON DVDRW SHW-160P6S>Version: PS08 - HA 1 TA 1 - 6.6.0.17
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LITE-ON DVD SOHD-16P9SV >Version: F$01 - HA 1 TA 0 - 6.6.0.17
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-75CAA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVD SOHD-16P9SV atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SHW-160P6S atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
LITE-ON DVD SOHD-16P9SV D: CDRom0
LITE-ON DVDRW SHW-160P6S E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 766MB (785404kB)
Free physical memory: 432MB (442840kB)
Memory in use : 43 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

23.3.2006
UDF/ISO compilation
5:51:08 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

5:51:10 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

5:51:10 PM #3 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

5:51:10 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

5:51:10 PM #5 Text 0 File Reader.cpp, Line 127
Reader running

5:51:10 PM #6 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SHW-160P6S running

5:51:10 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

5:51:10 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

5:51:10 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

5:51:10 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1787279 (397:10.29, 3490MB)

5:51:10 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

5:51:10 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: LITE-ON DVDRW SHW-160P6S, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193

5:51:10 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

5:51:10 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1787280 (1787280) = #1787280/397:10.30
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1787280 blocks [LITE-ON DVDRW SHW-160P6S]
--------------------------------------------------------------

5:51:10 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [LITE-ON DVDRW SHW-160P6S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3660349440, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1787280 | lead-out | 1 | 0x41 | 0x00

5:51:11 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

5:51:11 PM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

5:51:11 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

5:51:11 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)

5:51:11 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

5:51:11 PM #21 Text 0 File DVDR.cpp, Line 2505
Recording mode: Sequential Recording Mode

5:51:11 PM #22 Text 0 File Mmc.cpp, Line 21732
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON

5:51:11 PM #23 Text 0 File DVDR.cpp, Line 2660
Start write address at LBA 0
DVD high compatibility mode: Yes

5:51:11 PM #24 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

5:51:13 PM #25 SCSI -1046 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0BC40000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

5:51:13 PM #26 CDR -1046 File Writer.cpp, Line 311
Illegal disc

5:51:13 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

5:51:13 PM #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

5:51:13 PM #29 Text 0 File DVDR.cpp, Line 2903
EndDAO: Last written address was -1

5:51:14 PM #30 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 3/20/2006 11:39:25 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Moderator

1 product review

23. March 2006 @ 15:54

Link to this message

Quote:
Nero Version: 6.6.0.17

Upgrade to 6.6.0.18 here:

http://httpdl2.usw.nero.com/Nero-6.6.0.18.exe
http://httpdl1.usw.nero.com/Nero-6.6.0.18.exe

Quote:
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)

This error means that your burner doesn't like your discs, are those Fuji's made in Japan or Taiwan? I think they are MIT, the Japanese branded Fuji's should code out as RICOHJPN...much better media.

Try another brand disc...Verbatim or Taiyo Yuden, Sony, Maxell (made in Japan). The Nero update probably isn't necessary.

This message has been edited since posting. Last time this message was edited on 23. March 2006 @ 15:59

paris1900

Newbie

23. March 2006 @ 16:38

Link to this message

Thanks! I tried a Fuji disc from Japan and it burned fine. The original discs I was using were Imation. I also updated Nero and it seems to be working. Is there any way to be able to use the imation discs?

Moderator

1 product review

23. March 2006 @ 16:40

Link to this message

I wouldn't use Imation, they are basically crap...right up there with Memorex.

Verbatims are some of the best...do you live in the states?

jmox

Newbie

23. March 2006 @ 17:37

Link to this message

Thanks for the help. I updated the Nero edition, but haven't updated firmware, because I couldn't- for the reaon in Creaky's post. I tried again and failed, got another error.

As for my drive- it came with the machine, an emachine. Let me know what more info I can provide.

Would more memory do it, or should I just ditch these disks and get some of the slower speed ones?

Thanks for all the help.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18e

Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BGS4 - HA 4 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 4
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 4 ID 0 DMA: On
DiskPeripheral : ST3160021A atapi Port 5 ID 0 DMA: On

=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1633S E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 382MB (391664kB)
Free physical memory: 112MB (115432kB)
Memory in use : 70 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

23.3.2006
NeroAPI
8:27:21 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

8:27:22 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

8:27:22 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

8:27:22 PM #4 Text 0 File Reader.cpp, Line 127
Reader running

8:27:22 PM #5 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1633S running

8:27:22 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

8:27:22 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

8:27:22 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

8:27:22 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

8:31:01 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

8:31:01 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO

8:31:01 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193

8:31:01 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)

8:31:01 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------

8:31:01 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

8:31:01 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

8:31:01 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

8:31:01 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

8:31:01 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)

8:31:01 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

8:31:01 PM #21 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode for Multisession

8:31:01 PM #22 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON

8:31:01 PM #23 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: No

8:31:01 PM #24 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

8:31:02 PM #25 SCSI -1046 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x01600000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

8:31:02 PM #26 CDR -1046 File Writer.cpp, Line 311
Illegal disc

8:31:03 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

8:31:03 PM #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

8:31:03 PM #29 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was -1

8:31:03 PM #30 Phase 133 File APIProgress.cpp, Line 276
Writing short lead-out

8:31:03 PM #31 SCSI -1176 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 4, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x04

8:31:03 PM #32 CDR -1176 File WriterStatus.cpp, Line 167
Session fixation error

8:31:03 PM #33 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

8:31:03 PM #34 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 4x (5,540 KB/s)

8:31:03 PM #35 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

8:31:03 PM #36 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 10:07:32 PM

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

paris1900

Newbie

23. March 2006 @ 17:45

Link to this message

yes...Raleigh, NC

Moderator

1 product review

23. March 2006 @ 17:46

Link to this message

Here's a link: http://club.cdfreaks.com/showthread.php?t=146084

Moderator

23. March 2006 @ 22:09

Link to this message

@jmox -

Quote:
Existing drivers:

you still need to resolve this bit; your ATAPI drivers are supposed to be listed in this section, fix by following this - http://home.comcast.net/~bbmayo/FAQ.htm

Quote:
As for my drive- it came with the machine, an emachine.

- that's answered it, your drive is indeed an 'OEM' drive, in which case the firmware is fine

Quote:
Would more memory do it, or should I just ditch these disks and get some of the slower speed ones?

- more memory would be good, but as long as you close enough stuff down prior to burning you should get by for now. as i say the discs appear to be recognised fine by the firmware, you just need to get the ATAPI drivers sorted...

Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***

Moderator

1 product review

24. March 2006 @ 02:28

Link to this message

Quote:
Raleigh, NC

Verbatims can be found locally at Sam's or best buy, etc.

jmox

Newbie

24. March 2006 @ 04:32

Link to this message

Creaky- what exactly on that site will get my ATAPI drives listed there? I don't see it.

Thanks again.

Moderator

24. March 2006 @ 04:35

Link to this message

@jmox -

there's supposed to be a pdf guide on that site that explains fixing DMA & removing/reinstating IDE controllers... try this, it's the same difference... (just be very careful with regedit) -

Quote:
Run REGEDIT. Go to the following key:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E96A-E325-11CE-BFC1-08002BE10318}

It has subkeys like 0000, 0001, 0002, etc. Normally 0001 is the primary IDE channel, 0002 the secondary, but other numbers can occur under certain circumstances. You have to go through these subkeys and check the DriverDesc value until you find the proper IDE channel.

Delete MasterIdDataChecksum or SlaveIdDataChecksum, depending on whether the device in question is attached as master or slave, but it can't actually hurt to delete both. Reboot. The drive DMA capabilities will be redetected.

2006-01-19 ? Horst Schülke wrote that it is sufficient to empty the content of these values. But you can also delete the values entirely. Windows will automatically recreate them anyway, with new content.

Open Device Manager again and check whether the device is now actually using DMA mode. If so, congratulations, you've made it (at least until the next time Windows disables DMA).

Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***

Moderator

1 product review

24. March 2006 @ 08:07

Link to this message

<11> What is ASPI and do I need it?
The term 'ASPI' is an acronym that stands for: Advanced SCSI Programming Interface. All the following terms are synonymous: ASPI layer, ASPI drivers, ASPI interface. The term 'SCSI' [scuzzy] is an acronym that stands for Small Computer Systems Interface. An ASPI layer consists of four files that 'lie between' various programs [software] and certain devices, such as CD/DVD-ROM drives and CD/DVD burners/writers [hardware]. Software programs such as CD digital audio extractors [commonly known as 'Rippers'] and CD-writing utilities such as CDRWin use/require ASPI drivers to 'communicate with' SCSI devices. Many people don't realize however, that the files contained in an ASPI layer are also used in systems that *don't* contain a SCSI adapter, or SCSI devices .. for things such as ripping CD audio and burning CD/DVDs.
ASPI DOWNLOAD http://www.adaptec.com/worldwide/support/driverdetail.jsp?cat=/Pr...

Dave_3

Newbie

24. March 2006 @ 14:12

Link to this message

Hey guys I'm back!

Ok, so since last monday I have purchased a new NEC drive, a 3550 or something, here this one - http://www.newegg.com/Product/Product.asp?Item=N82E16827152055 - and it burns disks now. Now there is a new problem though... I played the movie i just made and it doesn't play smoothly. Gets pixely at times, jumps a bit at times... Still using verbatim 16x disks, burned at 4x, and my dvd player is semi-new and lists that it should play dvd-r's and all the rest. I've never had a problem with burned disks in it before with my old burner and memorex media. Any ideas why??? I'm not exactly happy at the moment seeming as I just spent money to get this to work again and now I'm still left with coasters.

Moderator

1 product review

24. March 2006 @ 15:31

Link to this message

Refresh our memory a bit Dave, are you using DVD Shrink or Recode for compression? Try using the advanced controls to smooth out the pixellation and don't do anything during the burn.

Dave_3

Newbie

24. March 2006 @ 15:46

Link to this message

I am using DVD Shrink. I already leave it completely alone while burning. I'm not exactly sure what to do though to try and smooth it out... any ideas, do you feel i should use other programs instead???

Dave_3

Newbie

24. March 2006 @ 15:51

Link to this message

DVD shrink, 3.2 to be exact... is there something better?

Dave_3

Newbie

24. March 2006 @ 15:57

Link to this message

how do i know if my firmware is good to go too?

Moderator

1 product review

24. March 2006 @ 16:04

Link to this message

Do you want modified firmware or factory firmware? Just so you'll know the modified firmware will make your drive region free, remove riplock and allow bitsetting...the factory firmware will only update your drive, none of the other niceties will be included.

You will want 1Y5 from here for the modified firmware if you are sure it is a 3550: http://www.micheldeboer.nl/firmware/

Original firmware can be found at the NEC site.

EDIT: Try Deep Analysis and AEC set to maximum smooth, your wrinkles should be ironed out. These features add a little time, but for the quality tradeoff it is well worth the extra time. Nero Recode is essentially the same program only slightly faster, and not free.

This message has been edited since posting. Last time this message was edited on 24. March 2006 @ 16:06

Dave_3

Newbie

24. March 2006 @ 16:22

Link to this message

Do you recommend going with the modified? I have no idea what i'm doing, so i'm going by your guidance here. Under my device manag. it says its a ND-3550A, so... i think so??? I already do the deep analysis, but i believe i have it set on max sharp, not max smooth. I'll attempt that. With the modifed firmware, would i still need to use dvd decryptor?

Dave_3

Newbie

24. March 2006 @ 16:26

Link to this message

By the way, I really appreciate the help! The burner you recommended seems great except my new dillema...

Moderator

1 product review

24. March 2006 @ 16:41

Link to this message

You burner shouldn't have anything to do with your delimma. I use modified firmware, I love it. You will need another tool to help you flash your drive, when you download the bin make sure you follow the instructions explicitly.

win21gui: http://binflash.cdfreaks.com/ It's about half way down the page.

hitmang17

Newbie

24. March 2006 @ 17:40

Link to this message

I've been having a similar problem for quite some time now. I'll post a couple of recent burn logs. I appreciate any help you can give.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 7.0.8.2
Internal Version: 7, 0, 8, 2
(Nero Express)
Recorder: <TSSTcorp CD/DVDW TS-L532U>Version: GA03 - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TSSTcorp CD/DVDW TS-L532U>Version: GA03 - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2100AT PL atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-L532U atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-L532U E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1022MB (1046636kB)
Free physical memory: 526MB (539216kB)
Memory in use : 48 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

24.3.2006
Burn DVD Image
11:29:22 PM #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory

11:29:22 PM #2 Text 0 File Reader.cpp, Line 124
Reader running

11:29:22 PM #3 Text 0 File Writer.cpp, Line 113
Writer E: TSSTcorp CD/DVDW TS-L532U running

11:29:22 PM #4 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media

11:29:22 PM #5 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2039053 (453:07.28, 3982MB)

11:29:22 PM #6 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

11:29:22 PM #7 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: TSSTcorp CD/DVDW TS-L532U, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193

11:29:22 PM #8 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:29:22 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2039054 (2039054) = #2039054/453:7.29
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2039054 blocks [E: TSSTcorp CD/DVDW TS-L532U]
--------------------------------------------------------------

11:29:22 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: TSSTcorp CD/DVDW TS-L532U] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4175982592, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2039054 | lead-out | 1 | 0x41 | 0x00

11:29:22 PM #11 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

11:29:22 PM #12 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

11:29:22 PM #13 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

11:29:22 PM #14 Text 0 File Burncd.cpp, Line 4187
Cache writing successful.

11:29:22 PM #15 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

11:29:22 PM #16 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 2x (2,770 KB/s)

11:29:23 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

11:29:23 PM #18 Text 0 File DVDR.cpp, Line 2760
Recording mode: Sequential Recording Mode

11:29:23 PM #19 Text 0 File DVDR.cpp, Line 2916
Start write address at LBA 0
DVD high compatibility mode: Yes

11:29:23 PM #20 Text 0 File Cdrdrv.cpp, Line 8661
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

11:43:13 PM #21 SPTI -1135 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 10 5F 80 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x0a9d0000: Len x10000
0x00 00 01 BA 45 3A F5 26 9D 0F 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 48 00 9C 6A 76 1E 25 26 38
0x0F 30 E9 C9 DD 3D 3C 5A 79 B4 29 50 60 62 0B 72

11:43:13 PM #22 CDR -1135 File Writer.cpp, Line 302
Write error
E: TSSTcorp CD/DVDW TS-L532U

11:43:13 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:43:14 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

11:43:14 PM #25 Text 0 File DVDR.cpp, Line 3156
EndDAO: Last written address was 1073023

11:43:14 PM #26 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 2x (2,770 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/10/2004 2:00:00 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 8:30:18 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 4:54:10 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 7.0.8.2
Internal Version: 7, 0, 8, 2

Recorder: <TSSTcorp CD/DVDW TS-L532U>Version: GA03 - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TSSTcorp CD/DVDW TS-L532U>Version: GA03 - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2100AT PL atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-L532U atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-L532U E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1022MB (1046636kB)
Free physical memory: 511MB (523416kB)
Memory in use : 49 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

24.3.2006
Burn DVD Image
10:11:03 PM #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory

10:11:03 PM #2 Text 0 File Reader.cpp, Line 124
Reader running

10:11:03 PM #3 Text 0 File Writer.cpp, Line 113
Writer E: TSSTcorp CD/DVDW TS-L532U running

10:11:03 PM #4 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media

10:11:03 PM #5 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2039053 (453:07.28, 3982MB)

10:11:03 PM #6 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO

10:11:03 PM #7 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: TSSTcorp CD/DVDW TS-L532U, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193

10:11:03 PM #8 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:11:03 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2039054 (2039054) = #2039054/453:7.29
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2039054 blocks [E: TSSTcorp CD/DVDW TS-L532U]
--------------------------------------------------------------

10:11:04 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: TSSTcorp CD/DVDW TS-L532U] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4175982592, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2039054 | lead-out | 1 | 0x41 | 0x00

10:11:04 PM #11 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

10:11:04 PM #12 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

10:11:04 PM #13 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

10:11:04 PM #14 Text 0 File Burncd.cpp, Line 4187
Cache writing successful.

10:11:04 PM #15 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

10:11:04 PM #16 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 2x (2,770 KB/s)

10:11:04 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

10:11:04 PM #18 Text 0 File DVDR.cpp, Line 2760
Recording mode: Sequential Recording Mode for Multisession

10:11:04 PM #19 Text 0 File DVDR.cpp, Line 2916
Start write address at LBA 0
DVD high compatibility mode: Yes

10:11:04 PM #20 Text 0 File Cdrdrv.cpp, Line 8661
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:35:27 PM #21 SPTI -1135 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 1D 47 60 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x05410000: Len x10000
0x00 00 01 BA 46 35 44 C9 95 19 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 D4 A4 A5 37 F4 A8 03 BE 88
0x04 57 D8 76 96 10 DF D1 C5 E7 9F 1B 07 CB 1B F5

10:35:27 PM #22 CDR -1135 File Writer.cpp, Line 302
Write error
E: TSSTcorp CD/DVDW TS-L532U

10:35:28 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:35:28 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

10:35:28 PM #25 Text 0 File DVDR.cpp, Line 3156
EndDAO: Last written address was 1918815

10:35:28 PM #26 Phase 133 File dlgbrnst.cpp, Line 1730
Writing short lead-out

10:35:28 PM #27 SPTI -1046 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x52 01 00 00 00 01 00 00 24 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05
Buffer x0349cc00: Len x24

10:35:28 PM #28 SPTI -1046 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x52 01 00 00 00 02 00 00 24 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05
Buffer x0349cc00: Len x24

10:35:28 PM #29 SPTI -1046 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 01 02 00 00 03 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05

10:35:28 PM #30 CDR -1046 File WriterStatus.cpp, Line 167
Illegal disc
E: TSSTcorp CD/DVDW TS-L532U

10:35:28 PM #31 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

10:35:28 PM #32 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 2x (2,770 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/10/2004 2:00:00 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 8:30:18 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 4:54:10 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Dave_3

Newbie

24. March 2006 @ 19:03

Link to this message

Well, I tried another disk this time with it set at max smooth instead of max sharp with the deep - the results didn't change. It still gets pixelly, sound jumps a bit, things of the nature. I have no idea what to try... Would the change in firmware maybe help? I'm so frusterated at the moment haha, mainly due to the fact that I'm clueless how to get this working again, but I really want it to! If i change the firmware, am i able to put it back how it was originally if i would so choose? Sorry for all of the questions, when it comes to computers, i know point and click haha. I'm as good with a computer as my girlfriend is under a car.

Advertisement

Moderator

25. March 2006 @ 01:30

Link to this message

@hitmang17 -

at the moment all i can see is Roxio (interferes with Nero) -

Quote:
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 8:30:18 PM

- uninstall Roxio and uninstall completely via Roxio Zapper - http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml

Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***

Page:	<< First	< Previous ...	6	7	8	9	10	11	12	13	Next >

Start a new thread

Related links

Download Nero from here.

How to burn DVDs with Nero? Read our guide from here.

Support AfterDawn and purchase your copy of Nero from here!

Related forum topics		Posts	Last post	Forum room
My Nero 6 OEM not compatable with Windows 8.1		4	2. June 2014	Windows - Software discussion
nero 2014		3	24. May 2014	Nero discussion
need to download Nero 9		5	9. May 2014	Nero discussion
read errors on disc verify in nero 12		2	3. May 2014	Nero discussion
I lose sound when I join files on Nero 12 Platinum?		9	29. April 2014	Nero discussion
Nero 12 activation		3	15. January 2014	Nero discussion
Help with NERO burning BluRay		2	22. December 2013	Nero discussion
DVD-DL Media keeps failing with Nero Platinum 12		6	7. December 2013	Nero discussion
A better way to burn Blu Ray disks...than using Nero!		3	30. October 2013	Blu-ray
which version of Nero to get for windows 7 OS ??		2	26. October 2013	Nero discussion

afterdawn.com > forums > software specific discussion > nero discussion > nero error - illegal disk - please help

Digital video: AfterDawn.com | AfterDawn Forums
Music: MP3Lizard.com
Gaming: Blasteroids.com | Blasteroids Forums | Compare game prices
Software: Software downloads
Blogs: User profile pages
RSS feeds: AfterDawn.com News | Software updates | AfterDawn Forums
International: AfterDawn in Finnish | AfterDawn in Swedish | AfterDawn in Norwegian | download.fi
Navigate: Search | Site map
About us: About AfterDawn Ltd | Advertise on our sites | Rules, Restrictions, Legal disclaimer & Privacy policy
Contact us: Send feedback | Contact our media sales team

© 1999-2026 by AfterDawn Ltd.