Mobile/PDA About Us Advertise here
User User name Password  
  Not registered yet? Register here.
Lost your password? Click here. 		 
  Home   News   Guides   Downloads   Glossary   Hardware   Profiles   Forums   v4  
 Advertise at AfterDawn.com     Link to us!     Private messages     Compose a private message     List of all updated threads     Threads without replies     Search messages
Sunday 22.3.2026 / 17:46
Search AfterDawn Forums:        In English   Suomeksi   På svenska
afterdawn.com > forums > software specific discussion > nero discussion > forcing me to burn at 1 x ??
Show topics
 
Forums
Forums
forcing me to burn at 1 X ??
  Jump to:
 
Posted Message
Page:12345... Next >Last >>
celibate
Junior Member
_ 		6. May 2006 @ 16:18 _ Link to this message    Send private message to this user   
I use dvd fab then i use vobblanker then finally dvd shrink then nero to burn.. I use to have no problem burning at 4 but now every time I go to burn at that speed it forces me to burn at 1 ??? is there a setting that I might beable to change it back to all speeds ? I used to have no problem burning, and stop burning for about a month, then wanted to start burning again and now this problem ?? I also tried burning with dvd decrypter and same thing makes me burn at 1 no matter what ??? Does this ring a bell to anyone ? Any suggestions ??
[ + quote]
Advertisement
_ 		__
binkie7
Moderator
_ 		6. May 2006 @ 20:26 _ Link to this message    Send private message to this user   
Could be a few things - burner, discs used, firmware or a combination.
So your best bet is to post the last Nero log to help try and sort this out.
If you're using Nero 6 look here:
program files>ahead>nero>nerohistory.txt
Nero 7 look here:
program files>nero>nero 7>core>nerohistory.txt
Also what burn speed options are listed in Shrink - is it just 1x?
[ + quote]


Forum Rules
Do this before posting
Do not click this link...
bvzxa
Junior Member
_ 		6. May 2006 @ 21:16 _ Link to this message    Send private message to this user   
Quote:
I use dvd fab then i use vobblanker then finally DVD Shrink then Nero to burn.. I use to have no problem burning at 4 but now every time I go to burn at that speed it forces me to burn at 1 ??? is there a setting that I might beable to change it back to all speeds ? I used to have no problem burning, and stop burning for about a month, then wanted to start burning again and now this problem ?? I also tried burning with DVD Decrypter and same thing makes me burn at 1 no matter what ??? Does this ring a bell to anyone ? Any suggestions ??


Well i hust had that problem with my Lite-On SHW 1635S. I use a way older version of Nero, and I back up stuff using Alcohol...well I noticed it was taking a very long time to burn 4 GB using 16x media.

Well, I ntoiced when Nero was doing it's thing, my buffer was dropping from it's usual 99%, down to 50%, then back up to 98%. It was not constant.

Eventhough I don't know why it does it, and it would be nice if someone explains it, I downloaded another firmware update. Fixed it no problem.
[ + quote]
good to go!!
celibate
Junior Member
_ 		7. May 2006 @ 06:35 _ Link to this message    Send private message to this user   
Still no luck ?? This is getting frustrating.. This has to be a different issue then my burning software.. Ive used DVD Decrypter as well as Nero and both force me to burn at 1 ?????? Grrr.. And to top it off when I go to play the Dvd it doesnt play ! Strange that it used to work a month ago and now that i decided to go back to burning again a month later all these problems ?? SOS Help please ...
[ + quote]
celibate2005
LOCOENG
Moderator

1 product review
_ 		7. May 2006 @ 07:09 _ Link to this message    Send private message to this user   
You don't indicate if your firmware is up to date or what brand media you are using...also check to see that your drive hasn't slipped into PIO mode. We need more information to give you the help you need.
[ + quote]
celibate
Junior Member
_ 		7. May 2006 @ 07:16 _ Link to this message    Send private message to this user   
I use DVD FAB 2.9.7.7 .. I also use vobblanker 2.1.0.0... and Nero 6 . I am using Verbatim x 16 DVD+R .. Thanks..
[ + quote]
celibate2005
LOCOENG
Moderator

1 product review
_ 		7. May 2006 @ 07:28 _ Link to this message    Send private message to this user   
I guess we will get it all eventually...

What brand and model # is your burner and what is the current firmware version that you are using, have you checked to see that you are running in DMA mode or PIO mode?
[ + quote]
celibate
Junior Member
_ 		7. May 2006 @ 07:47 _ Link to this message    Send private message to this user   
i have a maddog 12 x dvd burner.. im not sure what you mean by what firmware im using ?? I dont know how to check if im using dma or pio.. sorry im kind of new at all the burning jargen.. Hope you can be paitent with me .. Thanks ..
[ + quote]
celibate2005
LOCOENG
Moderator

1 product review
_ 		7. May 2006 @ 09:04 _ Link to this message    Send private message to this user   
I can...take the time to do a little reading.

http://my.afterdawn.com/locoeng/blog_entry.cfm/216

To find out your firmware updates open DVD Decrypter, go to Tools, Drive, Capabilities. The top line of the new window will list your drive and firmware version. You can also check for firmware updates through DVD Decrypter by going to Tools, Drive, check for firmware.

Good Luck and let us know how you are coming along.
[ + quote]
binkie7
Moderator
_ 		7. May 2006 @ 09:05 _ Link to this message    Send private message to this user   
@celibate
Find the Nero log and post that (see my post above). Even if it's a successful it will give us alot of the info (drive - make and model,etc. we need to sort this out.
[ + quote]


Forum Rules
Do this before posting
Do not click this link...
celibate
Junior Member
_ 		7. May 2006 @ 12:27 _ Link to this message    Send private message to this user   
It says my current firmware is 100A.. also says vom-12e 48x (ata) .. whatever else you need let me know .. thanks..
[ + quote]
celibate2005
celibate
Junior Member
_ 		7. May 2006 @ 14:10 _ Link to this message    Send private message to this user   
Windows XP 5.1

WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 11/11/2003 9:49:52 AM
Nero API version: 6.3.0.0
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: < VOM-12E48X> Version: 100A - HA 1 TA 0 - 6.3.0.0
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JB-00EVA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : VOM-12E48X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-R/RW SW-248F atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
VOM-12E48X D: CDRom0
SAMSUNG CD-R/RW SW-248F E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 196MB (201120kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.5.2006
NeroAPI
4:50:22 PM #1 Phase 112 File APIProgress.cpp, Line 250
DVD-Video files reallocation started

4:50:22 PM #2 Phase 114 File APIProgress.cpp, Line 250
DVD-Video files reallocation completed (no file modified)

4:50:22 PM #3 Phase 111 File APIProgress.cpp, Line 250
DVD-Video files sorted

4:50:22 PM #4 Text 0 File Reader.cpp, Line 118
Reader running

4:50:22 PM #5 Text 0 File Writer.cpp, Line 124
Writer VOM-12E48X running

4:50:22 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

4:50:23 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

4:50:23 PM #8 Text 0 File Burncd.cpp, Line 3094
Turn on Disc-At-Once, using DVD media

4:50:59 PM #9 Text 0 File DlgWaitCD.cpp, Line 239
Last possible write address on media: 2295103 (510:01.28)
Last address to be written: 2286153 (508:02.03)

4:50:59 PM #10 Text 0 File DlgWaitCD.cpp, Line 244
Write in overburning mode: FALSE

4:50:59 PM #11 Text 0 File DlgWaitCD.cpp, Line 2068
Recorder: VOM-12E48X, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7

4:50:59 PM #12 Text 0 File DlgWaitCD.cpp, Line 405
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)

4:50:59 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286154 (2286154) = #2286154/508:2.4
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286154 blocks [ VOM-12E48X ]
--------------------------------------------------------------

4:50:59 PM #14 Text 0 File Burncd.cpp, Line 3785
Can only write at 1x instead of 2x to current disc

4:50:59 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [ VOM-12E48X ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682043392, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286154 | lead-out | 1 | 0x00 | 0x41

4:50:59 PM #16 Phase 24 File APIProgress.cpp, Line 250
Caching of files started

4:50:59 PM #17 Text 0 File Burncd.cpp, Line 4061
Cache writing successful.

4:50:59 PM #18 Phase 25 File APIProgress.cpp, Line 250
Caching of files completed

4:50:59 PM #19 Phase 36 File APIProgress.cpp, Line 250
Burn process started at 1x (1,385 KB/s)

4:50:59 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:50:59 PM #21 Text 0 File Cdrdrv.cpp, Line 7912
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 07 4D 43 43 00 00 00 - 00 00 30 30 34 00 38 23 ..MCC.....004.8#
54 37 12 02 54 6C 02 92 - 5F 15 15 0B 0B 08 08 01 T7..Tl.._.......
19 1B 0C 0C 0C 0D 01 00 - 00 00 00 00 00 00 00 01 ................

4:50:59 PM #22 Text 0 File DVDPlusRW.cpp, Line 603
Start write address at LBA 0
DVD high compatibility mode: Yes

4:51:30 PM #23 SCSI -1106 File Cdrdrv.cpp, Line 1430
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x00CA0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03

4:51:30 PM #24 CDR -1106 File Writer.cpp, Line 301
Power calibration error

4:51:30 PM #25 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

4:51:30 PM #26 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

4:51:30 PM #27 SCSI -1046 File Cdrdrv.cpp, Line 1170
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x06
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x06

4:51:30 PM #28 Phase 127 File APIProgress.cpp, Line 250
Generating DVD high compatibility borders

4:51:30 PM #29 CDR -1046 File WriterStatus.cpp, Line 164
Illegal disc

4:51:30 PM #30 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once

4:51:30 PM #31 Phase 38 File APIProgress.cpp, Line 250
Burn process failed at 1x (1,385 KB/s)


Existing drivers:
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 7/15/2005 12:00:00 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/5/2005 1:12:26 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


[06.05.2006]------------------------------------
16:50:22 Robot error messages from:
====== *** NeroAPI, History File *** ======


Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 11/11/2003 9:49:52 AM
Nero API version: 6.3.0.0
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: < VOM-12E48X> Version: 100A - HA 1 TA 0 - 6.3.0.0
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JB-00EVA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : VOM-12E48X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-R/RW SW-248F atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
VOM-12E48X D: CDRom0
SAMSUNG CD-R/RW SW-248F E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 200MB (205756kB)
Memory in use : 60 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.5.2006
NeroAPI
5:21:49 PM #1 Phase 112 File APIProgress.cpp, Line 250
DVD-Video files reallocation started

5:21:50 PM #2 Phase 114 File APIProgress.cpp, Line 250
DVD-Video files reallocation completed (no file modified)

5:21:50 PM #3 Phase 111 File APIProgress.cpp, Line 250
DVD-Video files sorted

5:21:50 PM #4 Text 0 File Reader.cpp, Line 118
Reader running

5:21:50 PM #5 Text 0 File Writer.cpp, Line 124
Writer VOM-12E48X running

5:21:50 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

5:21:50 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

5:21:50 PM #8 Text 0 File Burncd.cpp, Line 3094
Turn on Disc-At-Once, using DVD media

5:22:23 PM #9 Text 0 File DlgWaitCD.cpp, Line 239
Last possible write address on media: 2295103 (510:01.28)
Last address to be written: 2286127 (508:01.52)

5:22:23 PM #10 Text 0 File DlgWaitCD.cpp, Line 244
Write in overburning mode: FALSE

5:22:23 PM #11 Text 0 File DlgWaitCD.cpp, Line 2068
Recorder: VOM-12E48X, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7

5:22:23 PM #12 Text 0 File DlgWaitCD.cpp, Line 405
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)

5:22:23 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [ VOM-12E48X ]
--------------------------------------------------------------

5:22:23 PM #14 Text 0 File Burncd.cpp, Line 3785
Can only write at 1x instead of 2x to current disc

5:22:23 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [ VOM-12E48X ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286128 | lead-out | 1 | 0x00 | 0x41

5:22:23 PM #16 Phase 24 File APIProgress.cpp, Line 250
Caching of files started

5:22:23 PM #17 Text 0 File Burncd.cpp, Line 4061
Cache writing successful.

5:22:23 PM #18 Phase 25 File APIProgress.cpp, Line 250
Caching of files completed

5:22:23 PM #19 Phase 36 File APIProgress.cpp, Line 250
Burn process started at 1x (1,385 KB/s)

5:22:23 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

5:22:23 PM #21 Text 0 File Cdrdrv.cpp, Line 7912
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 07 4D 43 43 00 00 00 - 00 00 30 30 34 00 38 23 ..MCC.....004.8#
54 37 12 02 54 6C 02 92 - 5F 15 15 0B 0B 08 08 01 T7..Tl.._.......
19 1B 0C 0C 0C 0D 01 00 - 00 00 00 00 00 00 00 01 ................

5:22:23 PM #22 Text 0 File DVDPlusRW.cpp, Line 603
Start write address at LBA 0
DVD high compatibility mode: Yes

5:22:51 PM #23 SCSI -1106 File Cdrdrv.cpp, Line 1430
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x00CA0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03

5:22:51 PM #24 CDR -1106 File Writer.cpp, Line 301
Power calibration error

5:22:51 PM #25 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

5:22:51 PM #26 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

5:22:51 PM #27 SCSI -1046 File Cdrdrv.cpp, Line 1170
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x06
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x06

5:22:51 PM #28 Phase 127 File APIProgress.cpp, Line 250
Generating DVD high compatibility borders

5:22:51 PM #29 CDR -1046 File WriterStatus.cpp, Line 164
Illegal disc

5:22:51 PM #30 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once

5:22:51 PM #31 Phase 38 File APIProgress.cpp, Line 250
Burn process failed at 1x (1,385 KB/s)


Existing drivers:
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 7/15/2005 12:00:00 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/5/2005 1:12:26 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


[06.05.2006]------------------------------------
17:21:50 Robot error messages from:
====== *** NeroAPI, History File *** ======


Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 11/11/2003 9:49:52 AM
Nero API version: 6.3.0.0
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: < VOM-12E48X> Version: 100A - HA 1 TA 0 - 6.3.0.0
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JB-00EVA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : VOM-12E48X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-R/RW SW-248F atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
VOM-12E48X D: CDRom0
SAMSUNG CD-R/RW SW-248F E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 195MB (200424kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.5.2006
NeroAPI
8:00:23 PM #1 Phase 112 File APIProgress.cpp, Line 250
DVD-Video files reallocation started

8:00:24 PM #2 Phase 114 File APIProgress.cpp, Line 250
DVD-Video files reallocation completed (no file modified)

8:00:24 PM #3 Phase 111 File APIProgress.cpp, Line 250
DVD-Video files sorted

8:00:24 PM #4 Text 0 File Reader.cpp, Line 118
Reader running

8:00:24 PM #5 Text 0 File Writer.cpp, Line 124
Writer VOM-12E48X running

8:00:24 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

8:00:24 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

8:00:24 PM #8 Text 0 File Burncd.cpp, Line 3094
Turn on Disc-At-Once, using DVD media

8:00:54 PM #9 Text 0 File DlgWaitCD.cpp, Line 239
Last possible write address on media: 2295103 (510:01.28)
Last address to be written: 2286153 (508:02.03)

8:00:54 PM #10 Text 0 File DlgWaitCD.cpp, Line 244
Write in overburning mode: FALSE

8:00:54 PM #11 Text 0 File DlgWaitCD.cpp, Line 2068
Recorder: VOM-12E48X, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7

8:00:54 PM #12 Text 0 File DlgWaitCD.cpp, Line 405
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)

8:00:54 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286154 (2286154) = #2286154/508:2.4
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286154 blocks [ VOM-12E48X ]
--------------------------------------------------------------

8:00:54 PM #14 Text 0 File Burncd.cpp, Line 3785
Can only write at 1x instead of 2x to current disc

8:00:54 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [ VOM-12E48X ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682043392, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286154 | lead-out | 1 | 0x00 | 0x41

8:00:54 PM #16 Phase 24 File APIProgress.cpp, Line 250
Caching of files started

8:00:54 PM #17 Text 0 File Burncd.cpp, Line 4061
Cache writing successful.

8:00:54 PM #18 Phase 25 File APIProgress.cpp, Line 250
Caching of files completed

8:00:54 PM #19 Phase 36 File APIProgress.cpp, Line 250
Burn process started at 1x (1,385 KB/s)

8:00:54 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

8:00:54 PM #21 Text 0 File Cdrdrv.cpp, Line 7912
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 07 4D 43 43 00 00 00 - 00 00 30 30 34 00 38 23 ..MCC.....004.8#
54 37 12 02 54 6C 02 92 - 5F 15 15 0B 0B 08 08 01 T7..Tl.._.......
19 1B 0C 0C 0C 0D 01 00 - 00 00 00 00 00 00 00 01 ................

8:00:54 PM #22 Text 0 File DVDPlusRW.cpp, Line 603
Start write address at LBA 0
DVD high compatibility mode: Yes

8:01:19 PM #23 SCSI -1106 File Cdrdrv.cpp, Line 1430
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x00CA0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03

8:01:19 PM #24 CDR -1106 File Writer.cpp, Line 301
Power calibration error

8:01:19 PM #25 SCSI -1046 File Cdrdrv.cpp, Line 1170
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x06
CDB Data: 0x5B 0x01 0x06 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x06

8:01:19 PM #26 CDR -1046 File WriterStatus.cpp, Line 164
Illegal disc

8:01:19 PM #27 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once

8:01:19 PM #28 Phase 39 File APIProgress.cpp, Line 250
Burn process aborted


Existing drivers:
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 7/15/2005 12:00:00 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/5/2005 1:12:26 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


[06.05.2006]------------------------------------
20:00:24 Robot error messages from:
====== *** NeroAPI, History File *** ======

[ + quote]
celibate2005

This message has been edited since posting. Last time this message was edited on 7. May 2006 @ 15:16
LOCOENG
Moderator

1 product review
_ 		7. May 2006 @ 14:49 _ Link to this message    Send private message to this user   
OK, now were cooking...LOL

First things first though, you need to remove your serial # from all of your logs, or remove all logs but the last one along with the serial for it through the edit post function.
Quote:
Nero API version: 6.3.0.0
Nero is out of the Bible...update to 6.6.0.18 here:

http://httpdl1.usw.ner.com/nero-6.6.0.18_no_yt.exe package 1
http://httpdl1.usw.nero.com/NVE-3.1.0.21_no_yt.exe package 2
Quote:
Recorder: < VOM-12E48X> Version: 100A - HA 1 TA 0 - 6.3.0.0
Your firmware version is an update behind, current version is 100D and can be found here: http://forum.rpc1.org/dl_result.php?kaj=1&isces
Quote:
Burn process started at 1x (1,385 KB/s)
I know that you can't select another speed, but firmware update and Nero upgrade could fix this...then you will want to burn at 1/2 the rated speed of the media.


[ + quote]

This message has been edited since posting. Last time this message was edited on 7. May 2006 @ 14:49
binkie7
Moderator
_ 		7. May 2006 @ 14:51 _ Link to this message    Send private message to this user   
@celibate
First let's edit out the serial # - begins w/ 1A - don't need someone else using it. It's in each of the logs posted.

Here some suggestions - try these and let's see how it goes.
Quote:
Nero API version: 6.3.0.0
Update your Nero to 6.6.0.18
Just copy and paste this FTP site in your browser for the download:
ftp://ftp.us.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe
Quote:
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
Nero doesn't fully recognize your drive so the Nero update may help.
Quote:
Recorder: < VOM-12E48X> Version: 100A
The latest firmware is 100D. Here's link:
http://forum.rpc1.org/dl_firmware.php?download_id=1833
The bad news is the maker of this drive Artec doesn;t seem to be around anymore. So the instruction link doesn't work. The download may contain a readme file with instructions on how to flash.
If you need help just post back.
Try these and we can go from there.


editted to add: ya beat me locoeng- good advice btw :)
[ + quote]


Forum Rules
Do this before posting
Do not click this link...

This message has been edited since posting. Last time this message was edited on 7. May 2006 @ 14:53
celibate
Junior Member
_ 		7. May 2006 @ 14:57 _ Link to this message    Send private message to this user   
Ok.. Im not sure what you mean >> First things first though, you need to remove your serial # from all of your logs, or remove all logs but the last one along with the serial for it through the edit post function. can you give me a step by step ? talk to me like im 5 lol.. and as far as those links , do i download all three ?? and to what location do i download them too ??? Thanks...
[ + quote]
celibate2005
gwendolin
AfterDawn Addict
_ 		7. May 2006 @ 15:05 _ Link to this message    Send private message to this user   
@binkie7, Karen heres a new link for 6.6.0.18 ,Cheers

http://httpdl1.usw.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe
[ + quote]


guide by ScubaPete http://www.dvdplusvideo.com/tutorial007.html Nero guide by alkohol http://www.dvdplusvideo.com/Guides/alkohol_guide3.html

New RipIt4Me + DVD Shrink + ImgBurn guid <==== Rip any DVDs http://forums.afterdawn.com/thread_view.cfm/422740 Guides by bbmayo..... http://webpages.charter.net/bacitup/

This message has been edited since posting. Last time this message was edited on 7. May 2006 @ 15:04
celibate
Junior Member
_ 		7. May 2006 @ 15:09 _ Link to this message    Send private message to this user   
ok im getting there.. my only question is what location do i download these links to ??
[ + quote]
celibate2005
binkie7
Moderator
_ 		7. May 2006 @ 15:17 _ Link to this message    Send private message to this user   
@celibate
In the post with your logs look to the right and you will see what looks like a pencil w/ paper. Click on that to edit your post.
The logs are separtated by this:
====== *** NeroAPI, History File *** ======
And your serial # is under that.

Next use the link gwen gave or the ftp to update Nero. Download it then install it - this will update Nero. Double click on the file downloaded and it will guide you thru the process.

Scratch the firmware update for now - the update is not available. I'll have to see if another can be found.
[ + quote]


Forum Rules
Do this before posting
Do not click this link...
celibate
Junior Member
_ 		7. May 2006 @ 15:19 _ Link to this message    Send private message to this user   
ok i think i got rid of the serial .. can you still see it ??
[ + quote]
celibate2005
celibate
Junior Member
_ 		7. May 2006 @ 15:25 _ Link to this message    Send private message to this user   
Ok ive downloaded the link gwen posted .. Ill just wait on that firmware update now.. thank you so much everyone for all your help ..
[ + quote]
celibate2005
binkie7
Moderator
_ 		7. May 2006 @ 15:27 _ Link to this message    Send private message to this user   
Nope - it's gone - your good to go!
Here's a link for package 2 - txs Gwen! - of Nero that you should also downlaod and install - it has Recode, Nero Vision etc.
http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe

Hopefully one of us can find a firmware update for you.

edit: fix link
[ + quote]


Forum Rules
Do this before posting
Do not click this link...

This message has been edited since posting. Last time this message was edited on 7. May 2006 @ 15:28
celibate
Junior Member
_ 		7. May 2006 @ 15:42 _ Link to this message    Send private message to this user   
ok i downloaded the first link in gwens post .. im assuming that updates Nero.. i also downloaded the 2 link in your last post binky .. is that link Nero showtime ?? Ill be paitently waiting for that firmware update .. thanks !!
[ + quote]
celibate2005
LOCOENG
Moderator

1 product review
_ 		7. May 2006 @ 15:44 _ Link to this message    Send private message to this user   
Man I go on daiper duty for 20 minutes and everythings peachy keen, good work Binkie and Gwen...thanks for the links.

EDIT: You too karen, great minds think alike...LOL
[ + quote]

This message has been edited since posting. Last time this message was edited on 7. May 2006 @ 15:44
binkie7
Moderator
_ 		7. May 2006 @ 15:48 _ Link to this message    Send private message to this user   
@LOCOENG
Oh no still need your help! Firmware on this drive is a bear - may have to be done thru dos w/ a floppy. Seems the company is no longer around or at least hosting any websites.
Oh and better you than me on diaper duty :o)


The only good download I can find it this:
http://info.ultima.com.tw/fae/Service_e/nl/home/firmware.asp.htm
[ + quote]


Forum Rules
Do this before posting
Do not click this link...
Advertisement
_ 		__
 
_
LOCOENG
Moderator

1 product review
_ 		7. May 2006 @ 15:58 _ Link to this message    Send private message to this user   
EWWWWWWWWW

I'm almost afraid to touch that one...looks like the instructions on the page should suffice though, as well as downloading the DOS boot disc. Could be risky.

Oh and you are more than welcome to take over on diaper dookie for a while if ye wish...LOL

EDIT:

@celibate

How old is this drive anyway, several years perhaps?
[ + quote]

This message has been edited since posting. Last time this message was edited on 7. May 2006 @ 15:58
 
Page:12345... Next >Last >>
afterdawn.com > forums > software specific discussion > nero discussion > forcing me to burn at 1 x ??
 

Digital video: AfterDawn.com | AfterDawn Forums
Music: MP3Lizard.com
Gaming: Blasteroids.com | Blasteroids Forums | Compare game prices
Software: Software downloads
Blogs: User profile pages
RSS feeds: AfterDawn.com News | Software updates | AfterDawn Forums
International: AfterDawn in Finnish | AfterDawn in Swedish | AfterDawn in Norwegian | download.fi
Navigate: Search | Site map
About us: About AfterDawn Ltd | Advertise on our sites | Rules, Restrictions, Legal disclaimer & Privacy policy
Contact us: Send feedback | Contact our media sales team
 
  © 1999-2026 by AfterDawn Ltd.

  IDG TechNetwork