|
Dbox In Ireland
|
|
|
blissirl
Newbie
|
11. July 2008 @ 23:55 |
Link to this message
|
Finally got the cork box to scan had tried ALL of the blades ALL of the others too 2X_Sportster_1.10_RC006_UK_10April07 (oggnogg and the irish cables.xml img7 (saw all the edited FREQs and symbol rate was bang on too from my subbed box i saw that and scanned for cork chorus BF bang all transponders the lot woo hoo.) i think his nick was the right combo for me on nokia db2 .
Now got all channels back hurray and alot more stable due to corrected frequency scans well done lads broke me ballox for so long now im satisfied i can work away on me own thanx to all in here keep it up.
For the life of me none of the other images apart from this one is the only one to have ever scanned in cork for me even with the cables.xml and cleaning bouquets etc.
|
|
Advertisement
|
 |
|
|
|
ruprect
Senior Member
|
12. July 2008 @ 06:11 |
Link to this message
|
Originally posted by padshea:
Uh-Oh Ive a problem!!
Am flashing my dbox with the Blade image but the flash process has stalled at the 'Writing Flash-Programming Flash' Global Progress is over the halfway mark. stage.
There has been no progress for 20 minutes.
Any advice on what to do??
You got a bad/stalled flash, it probably has no IP now so you will have to use IFA to flash it on. I have had this problem with blade on a few dboxes, don't worry though IFA should fix it. Just reboot by pressing the 2 outer buttons on the front of the box at the same time. The image will probably freeze while loading or have a kein system notice on the LCD.
Originally posted by blissirl:
Now got all channels back hurray and alot more stable due to corrected frequency scans
Well done, thought you would have fecked it out the window by now ;)
This message has been edited since posting. Last time this message was edited on 12. July 2008 @ 06:12
|
|
urma
Newbie
|
12. July 2008 @ 07:13 |
Link to this message
|
can anybody help, i have a eurovox and n*l in dublin and i cant get lfc tv does anybody know how to get it back?
|
AfterDawn Addict
|
12. July 2008 @ 08:27 |
Link to this message
|
Originally posted by urma:
can anybody help, i have a eurovox and n*l in dublin and i cant get lfc tv does anybody know how to get it back?
urma, try & stick to one thread :)
|
|
Cupart
Newbie
|
12. July 2008 @ 09:38 |
Link to this message
|
|
Hmmm, switched on my box 10 min ago and error message: No Channels found.
I'm on N*L DUBLIN and tried to rescan but without any luck.
Any one with the same problems on a DBox2 (Blade Quad)?
Cheers and thanks for any ideas...
//F
|
|
keakee
Newbie
|
14. July 2008 @ 10:30 |
Link to this message
|
hey ruprect you answered a query i had last week told me to ifa blade quad image to my d box only got a chance to try it at the weekend the prob i hav now is it keeps saying transfer unsuccessful in ifa tried it loads of times have followed all the manuals step by step can't figure out were goin wrong any advice?? using a null modem cable as well as crossover thanks in advance u know anyone who cud fix it d18 area...
|
|
Cupart
Newbie
|
14. July 2008 @ 11:03 |
Link to this message
|
Originally posted by Cupart:
Hmmm, switched on my box 10 min ago and error message: No Channels found.
I'm on N*L DUBLIN and tried to rescan but without any luck.
Any one with the same problems on a DBox2 (Blade Quad)?
Cheers and thanks for any ideas...
//F
Problem solved. I guess the image I was on did some f-up so I changed to Trinity and this solved the problem...
|
|
JR25
Junior Member
|
14. July 2008 @ 11:06 |
Link to this message
|
Afternoon guys. I'm trying to flash the new blade quad image. I'm usinf the flash assistant programme. It worked alreight before but now when I try it gets about half way across and then it doesn't move any further. I've left it for up to an hour and still no luck. It doesn't give an error message, just doesn't finish.
Any help would be appreciated.
|
|
EC74
Junior Member
|
16. July 2008 @ 09:15 |
Link to this message
|
Hey Folks,
Droppin channels on the Dbox2 over last few weeks updating itself fine with the code rolls, I'm on the Latest Commando image
Is there a general consensus that the new Blade Quad is the Dogs B****X now???
Is it set up the same for Dublin, channel lists etc set up brilliant
Cheers
|
|
EC74
Junior Member
|
16. July 2008 @ 09:18 |
Link to this message
|
Originally posted by JR25:
Afternoon guys. I'm trying to flash the new blade quad image. I'm usinf the flash assistant programme. It worked alreight before but now when I try it gets about half way across and then it doesn't move any further. I've left it for up to an hour and still no luck. It doesn't give an error message, just doesn't finish.
Any help would be appreciated.
I've Flashed loads of times with different Images the simple rule is just keep tyryin, I've had to try sometimes like 50 times before it flashed correctly, just keep at it & if not Ruprect & Oggnogg on here be the all knowing all seeing wonder geniuses u need :-)
Cheers
|
|
BigKnack
Junior Member
|
17. July 2008 @ 05:03 |
Link to this message
|
Has anybody got the N0kia dbox 2 (with 2 chips) up and running on Chorus in Co. Kildare ???
If so, what image did you use and what adjustments did you have to make to it?
I'm going cracked here trying to get it going, used loads of different images and so called fixes. I've spent hours and hours trying to get it working, can anyone please plase plase help???
|
AfterDawn Addict
|
17. July 2008 @ 06:00 |
Link to this message
|
|
Did you try the frequencies I gave you?
|
|
BigKnack
Junior Member
|
17. July 2008 @ 06:42 |
Link to this message
|
Originally posted by sc0user:
Did you try the frequencies I gave you?
Yeah I tried the frequencies you gave me. What I did was edited the cables XML file and copies it across, just one thing, you gave the frequencies to me in the following format (324.000) I tried using them this way, also tried 324000 and 3240000 because I wasn't sure about the dot, but still didn't find any channels. What is the correct format?
I also tried changing the symbol rate and tried both 6887000 and 6875000. Do you know what the correct symbol rate is?
Have you heard of anybody set up om a DBox in Kildare on a Ch0rus connection?
I've been digging around again this morning and see that some people are connected using the starview and eurovox type of boxes.
There also was a mention that the box I'm using may need dvb-t or soething like that, any ideas?
|
AfterDawn Addict
|
17. July 2008 @ 07:11 |
Link to this message
|
OK the info I gave you was correct so should have worked if you have a live feed. You have to replace the cable.xml to the right directory. Some images have it in var/tuxbox/config and others in share/tuxbox.
Frequencies should be as per your original cable.xml format and add frequencies I gave you, e.g. <transponder frequency="346000000" symbol_rate="6875000" fec_inner="3" modulation="3" /> so you need to format them to that type.
TBH the best bet would be to download Mgb's Irish Cables.xml and do as before replace your cables.xml with it delete scan.config, unplug the box and then power up and rescan with Ch**us BF. You will find Mgb's cables.xml here http://forums.afterdawn.com/thread_view.cfm/163/408883#4066794
|
|
BigKnack
Junior Member
|
17. July 2008 @ 09:12 |
Link to this message
|
Originally posted by sc0user:
OK the info I gave you was correct so should have worked if you have a live feed. You have to replace the cable.xml to the right directory. Some images have it in var/tuxbox/config and others in share/tuxbox.
Frequencies should be as per your original cable.xml format and add frequencies I gave you, e.g. <transponder frequency="346000000" symbol_rate="6875000" fec_inner="3" modulation="3" /> so you need to format them to that type.
TBH the best bet would be to download Mgb's Irish Cables.xml and do as before replace your cables.xml with it delete scan.config, unplug the box and then power up and rescan with Ch**us BF. You will find Mgb's cables.xml here http://forums.afterdawn.com/thread_view....4066794
Cool, I'll give that a shot this evening when i get back home.
|
AfterDawn Addict
|
17. July 2008 @ 09:27 |
Link to this message
|
|
That should work and if not I know someone in your area that has a Dbox and its up and running, maybe able to get him to sort you out with his services.
|
|
BigKnack
Junior Member
|
17. July 2008 @ 09:37 |
Link to this message
|
Originally posted by BigKnack:
Originally posted by sc0user:
OK the info I gave you was correct so should have worked if you have a live feed. You have to replace the cable.xml to the right directory. Some images have it in var/tuxbox/config and others in share/tuxbox.
Frequencies should be as per your original cable.xml format and add frequencies I gave you, e.g. <transponder frequency="346000000" symbol_rate="6875000" fec_inner="3" modulation="3" /> so you need to format them to that type.
TBH the best bet would be to download Mgb's Irish Cables.xml and do as before replace your cables.xml with it delete scan.config, unplug the box and then power up and rescan with Ch**us BF. You will find Mgb's cables.xml here http://forums.afterdawn.com/thread_view....4066794
Cool, I'll give that a shot this evening when i get back home.
Just 1 more thing, what's the path of the scan.config file ? I couldn't find the file yesterday eve when I was trying to fix the box.
|
AfterDawn Addict
|
17. July 2008 @ 09:43 |
Link to this message
|
scan.conf will be in the same location as your cables.xml, although note I gave you two locations as images differ. BTW what image are you using, as I presume you have either an AU fixed image or is it an old image?
This message has been edited since posting. Last time this message was edited on 17. July 2008 @ 09:50
|
|
BigKnack
Junior Member
|
17. July 2008 @ 12:47 |
Link to this message
|
Humm, that's a littel worrying, I never found the scan.config file in that location last night.
I'm using what's supposed to be one of the latest images that I downloaded from the internet, a blade trinity one it was posted only last month on the file share website.
Maybe there's no scan.config file, because I never managed to successfully find anything from a scan. Is the file automatically created after a successful scan?
|
AfterDawn Addict
|
17. July 2008 @ 12:53 |
Link to this message
|
Blade Quad has since been released with AU fixed although the Net ID is incorrect for some areas of Ireland. Scan.conf is on all boxes. Trinity will not AU without certain files.
Best bet for you would be a fixed image like Lakey Pro. You will find it in Eamos at the bottom of my post. Saves all the messing about with files. Just flash the image, set your location and scan. See how that fairs after that if its still not working I will tell you who has services for your area.
|
|
BigKnack
Junior Member
|
17. July 2008 @ 13:13 |
Link to this message
|
Originally posted by sc0user:
Blade Quad has since been released with AU fixed although the Net ID is incorrect for some areas of Ireland. Scan.conf is on all boxes. Trinity will not AU without certain files.
Best bet for you would be a fixed image like Lakey Pro. You will find it in Eamos at the bottom of my post. Saves all the messing about with files. Just flash the image, set your location and scan. See how that fairs after that if its still not working I will tell you who has services for your area.
Thanks, i'll give it a shot this evening. I had the Lkey pro image on it a few days ago and then flashed with the blade one on Wednesday! lol
|
AfterDawn Addict
|
17. July 2008 @ 13:14 |
Link to this message
|
|
LOL let us know how you get on.
|
|
bod78
Junior Member
|
18. July 2008 @ 09:34 |
Link to this message
|
|
hi can any1 tell me how to flash my dbox i not got a clue with these boxes,i lost all channels about a week ago cant get them back on any help would be great.
|
|
BigKnack
Junior Member
|
18. July 2008 @ 11:47 |
Link to this message
|
Originally posted by sc0user:
LOL let us know how you get on.
No Joy, files are in different places on that image too, can't remeber exactly, but the cables.xml file was not in var\tuxbox\config, it was in something like var\shared\tuxbox\config.
Anyway, the image seemed to be slightly coruppted, cos when I went to scan for channels, there was an error messsage half faded accross the screen. It might have been a file or two didn't transfere properly when i flashed it.
Anyway, I'm off home for another evening of playing with my box !!
|
|
Advertisement
|
|
|
AfterDawn Addict
|
18. July 2008 @ 11:54 |
Link to this message
|
As per my post above:
Quote:
OK the info I gave you was correct so should have worked if you have a live feed. You have to replace the cable.xml to the right directory. Some images have it in var/tuxbox/config and others in share/tuxbox.
Best of luck it just takes a bit of messing about but you'll get there ;)
|
