|
RipIt4Me Update
|
|
AfterDawn Addict
|
10. July 2006 @ 01:29 |
Link to this message
|
Just a note that RipIt4Me has been updated to version 1.3.0.0.
http://www.ripit4me.org/guide.html
What's new in the latest version?
In movie-only mode, the cleanup phase now remove any cell that's shorter than 2s, but leaves the last one.
In 1-click mode, RipIt4Me asks for the path to FixVTS if the user hasn't set it yet and is planning on running it.
Added movie-only mode.
Adjust the preferences as follows:
- Adjust it in the preferences to set the default option (saved from run to run).
- Adjust it in wizard or 1-click mode for a temporary choice (not saved from run to run).
For example: If you do all your movies in movie-only mode, then set that in the preferences.
Otherwise, don't set it in the preferences and set it in the wizard/1-click for a 1-time shot.
Added code to prevent running 2 instances of FixVTS or DVD Shrink simultaneously, or starting DVD Shrink while FixVTS is running.
Added option to generate the target rip path automatically from the DVD label.
If the DVD turns out to be scratched or dirty, the FinalPSLFile.psl psl file is modified to exclude cells that seem to include scratches. This allows you to re-rip the DVD in DVD Decrypter, making sure Decrypter will retry reading the scratched parts of the DVD as it does best.
Added option to open the FAQ if the DVD appears to be scratched.
Added code to check that DVD Decrypter isn't already running when RipIt4Me starts the rip.
The wizard dialogs are now modeless, which allows you to go back to the main window and use the scrollers. One drawback is that tooltips don't work in modeless dialogs. Thank Bill for that.
The log now scrolls to the bottom for new messages.
Added option to play a sound at the end of the rip. There's no sound included with the app, so if you don't set one, it will try to use the DVD Decrypter success sound (note it will not play in wizard mode if you skip or abort the rip).
Added check for AnyDVD and DVD43, with an option to (brutally) kill the process before running RipIt4Me.
Changed DVD Decrypter option to hide Pack Header Not Found warnings.
99% of all problems are between the computer and the chair.
This message has been edited since posting. Last time this message was edited on 10. July 2006 @ 01:39
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
10. July 2006 @ 04:00 |
Link to this message
|
|
good call...... and you're fast! when did it come out? I love this program.... but I don't use Shrink with it.... I go straight to DVDRebuilder! Love the fact that it incorperates DVDDecrypter.... Best ripper ever!
|
AfterDawn Addict
|
10. July 2006 @ 04:33 |
Link to this message
|
|
Same here. If a movie needs compression, I use DVD-RB Pro. Never Shrink.
99% of all problems are between the computer and the chair.
|
AfterDawn Addict
|
10. July 2006 @ 21:54 |
Link to this message
|
99% of all problems are between the computer and the chair.
|
AfterDawn Addict
|
15. July 2006 @ 01:14 |
Link to this message
|
99% of all problems are between the computer and the chair.
This message has been edited since posting. Last time this message was edited on 15. July 2006 @ 01:15
|
|
daman1
Senior Member
|
15. July 2006 @ 06:15 |
Link to this message
|
|
i love this;
.Added check for the right FixVTS version
:o)
|
|
daman1
Senior Member
|
18. July 2006 @ 17:36 |
Link to this message
|
New version guys;
(7-18-06) 1.4.2.0
http://www.ripit4me.org/download.html
whats new;
.Accented characters in the DVD label are now converted to "_".
.Added display of DVD Label in Step 1 (the DVD-ROM is monitored in case you open/close it).
.Fixed a problem with the DVD label code (if there was no DVD, or the label couldn't be found, the previous label was used).
.Fixed a bug in the UDF routine that caused some of the VOB files to not be found in X-men 2 for example.
.Fixed bug that caused older versions of FixVTS (e.g., Beta 1.24) to not be flagged as such.
.Fixed bug that prevented RipIt4Me.log from being removed if DVD Shrink was still running at the end of processing.
THANK YOU GUYS FOR A GREAT PROGRAM,,YOU GUYS RULE!!!:o)
This message has been edited since posting. Last time this message was edited on 18. July 2006 @ 17:42
|
|
durutti
Newbie
|
20. July 2006 @ 05:59 |
Link to this message
|
DVD rebuilder has better quality you think?
I use DVDshrink and Nero Recode what do u think about them
|
|
daman1
Senior Member
|
21. July 2006 @ 04:00 |
Link to this message
|
Another update;
http://www.ripit4me.org/download.html
Version 1.4.3.0 (20 July 2006)
whats new?
.Added code to prevent autorun.inf from running when you insert your DVD if RipIt4Me is the foreground window. This should help with issues with DVDs that have an autorun.inf file (such as Basic Instinct 2). Make sure you start RipIt4Me before you insert the DVD.
.If your DVD Decrypter settings instruct it to open the tray after a read, RipIt4Me will do that at the end of a successful 1-click run.
.Fixed a BOV scanning bug that could cause RI4M to detect many more buttons than really present (X-men 2 for example).
.Fixed a bug that could cause RI4M to crash when dealing with certain authoring errors.
keep up the great work people!!!!!!!!
This message has been edited since posting. Last time this message was edited on 21. July 2006 @ 04:01
|
|
daman1
Senior Member
|
28. July 2006 @ 17:04 |
Link to this message
|
Version 1.4.4.0 (28 July 2006)
http://www.ripit4me.org/download.html
Improvements:
.Added ISO mode: Ripping in ISO mode allows you to do a 1-for-1 copy of your DVD. The ISO isn't "cleaned up" so it is likely that tools that can open ISOs for editing (such as DVD Shrink) will still have problems with it. However, it should be possible to burn the ISO using ImgBurn and because the DVD isn't modified, the layer break will be right (for Double-Layer ISOs).
.Added preference to remove unplayed cells in menus (provided they have no buttons and no commands). This can be useful to remove the long black video sometimes found in VIDEO_TS.VOB and other menu vobs. Enable it in the preferences as the default is off.
.Added a warning in the log if an autorun.inf file is found at the root of the DVD.
.Added code to save the original and modified IFOs in a subdirectory along with the logs.
.Added a key in the .ini file DirWhereToSaveLogs= where you can specify the base directory where to save logs and IFOs.
Turned "Remove tiny cells" on by default.
Menus commands and program tables are now always cleaned up.
.Added handling of preferred video mode (sprm(14)) when the structure is analysed.
.Improved the detection and cleanup of bogus cells in protected PGCs.
.Added better handling of scratched DVDs. When a scratch is detected, the user can re-rip the affected file(s) automatically, using the updated PSL.
Fixes:
Fixed a bug that caused the final PSL to still include areas that correspond to scratches (it should not).
The code to prevent autorun.inf from running was not enabled if the Wizard step 1 window was active instead of the main one. This has been fixed.
.Fixed a bug that could cause some of the 1: lines in the final PSL file to be omitted
Improved/Fixed the code that removes bad cells and unused menu cells:
- Fixed a bug that could cause bogus commands (jumps to non-existent cells/pg/chapters) to not be fixed.
- Fixed a bug that could cause bogus chapters/programs to not be removed.
RI4M now requires FixVTS 1.403 to be installed
This message has been edited since posting. Last time this message was edited on 28. July 2006 @ 17:06
|
|
daman1
Senior Member
|
1. August 2006 @ 05:08 |
Link to this message
|
Version 1.4.5.0 (31 July 2006)
http://www.ripit4me.org/download.html
.When a DVD is detected as scratched, RI4M will offer to re-rip as many times as the user wishes if read errors are still found. In this case, the number of read retries is adjusted to 20.
.Fixed a problem that could occur if a DVD title declared a bogus number of chapters. This will make RipIt4Me more robust to intentional authoring errors.
.The log has been cleaned up.
|
|
daman1
Senior Member
|
9. August 2006 @ 02:58 |
Link to this message
|
Version 1.4.6.0 (9 August 2006)
http://www.ripit4me.org/download.html
whats new;
.The movie-only mode now produces a fully compliant DVD with a very simple structure. This allows opening the output in DVD Shrink (full-backup or reauthor modes) as well as other backup programs (Nero Recode or DVD Rebuilder for example).
.There is a new movie+menus mode which rips the movie titleset and keeps functional menus, but blanks and bypasses all non-movie titlesets. This will be useful for people who like menus for accessing chapters but don't want to keep extras/previews etc.
.In both of the above modes, if your DVD contains a wide-screen and a full-screen version of the same movie, RipIt4Me asks you to pick which one to rip.
.Added debug code to help fix crashes: If RipIt4Me crashes, the next time you start it, it will ask you to post a special debug log to the forum. Please do it, as this is the only way the bug will be fixed.
.Added abort button to quickly quit DVD Decrypter.
.Fixed the bug that prevented a Z: drive from being detected.
The logs are now (optionally) saved before the DVD tray is (optionally) opened.
.Removed the message "Couldn't find absolute start sector for VTS ... " as it seems to confuse people and is usually nothing to worry about.
|
AfterDawn Addict
|
9. August 2006 @ 04:33 |
Link to this message
|
The new feature of the movie+menus is great, and I like the feature of it working with other programs. Although, I have not had a problem with this if you run the file through FixVTS. This program is getting pretty equal to AnyDVD, may take a little more time but it is free, free, free. Also, cudos to the developer and to jeanl for FixVTS.
|
|
daman1
Senior Member
|
9. August 2006 @ 04:56 |
Link to this message
|
I agree,,i just about bought AnyDVD when ri4m came out
great little proggy, makes clean good rips.
plus it's free and saved me$$ on buying AnyDVD.
|
AfterDawn Addict
|
9. August 2006 @ 05:01 |
Link to this message
|
Well it does everything now, full backup, movie only, movie+menu, in file or iso format. And FixVTS does an excellent job of cleaning the file. I have not used AnyDVD in weeks, mainly to see if there is anything this program cannot handle and so far it has come through.
|
|
daman1
Senior Member
|
9. August 2006 @ 05:39 |
Link to this message
|
|
Yup i know,,it's a wonderful tool does everything and going to get
better with time :o).
i love it it's all i use now,i havent seen anything
that can stop it.
great job ri4m team!!, whoever you are.
|
|
daman1
Senior Member
|
12. August 2006 @ 04:26 |
Link to this message
|
|
Version 1.4.7.0 (11 August 2006)
.There is a new Tools menu that allows you to launch your favorite software after the rip (provided the application can open a DVD passed as an argument in its command line). The Tools menu includes an option to open the last target rip folder used.
.There is now a preference drop-down selector to pick the default rip mode (Full DVD, Movie+Menus, etc). This can be changed on a rip-by-rip basis in Step 1.
.Added more debug info and more checks to avoid crashes (thanks to everyone who posted their debug logs, it's VERY useful! Keep them coming!)
.The crash debug message no longer pops up if you have 2 instances of RipIt4Me opened at the same time.
.Added check for DVD Region Free at startup as it can create a conflict.
.Added display of region code in the log.
|
|
barbarali
Newbie
|
14. August 2006 @ 09:13 |
Link to this message
|
I have used Icopydvds2 for several years, but Sony and Disney just spoofed me months ago and now I am looking for best way to do this. I have read this whole thread and some is over my head. I just downloaded AnyDVD but have not tried it- free sounds good also.
Help- want to record movies again.
|
|
daman1
Senior Member
|
14. August 2006 @ 09:49 |
Link to this message
|
|
@barbarali
DL and try RipIt4Me, very powerful little tool uses DVDD and
shrink, read the guides and try it,,you'll love it trust me,
Links in my sig.
also use ImgBurn too!!!
|
AfterDawn Addict
|
14. August 2006 @ 10:00 |
Link to this message
|
This message has been edited since posting. Last time this message was edited on 14. August 2006 @ 10:01
|
|
daman1
Senior Member
|
14. August 2006 @ 10:06 |
Link to this message
|
|
arniebear you need to update your guide some now. :o)
|
AfterDawn Addict
|
14. August 2006 @ 10:12 |
Link to this message
|
|
I know, sigh. Just have had no time recently :)
|
|
daman1
Senior Member
|
14. August 2006 @ 10:14 |
Link to this message
|
|
lol...nice work!!!
This message has been edited since posting. Last time this message was edited on 14. August 2006 @ 10:15
|
|
daman1
Senior Member
|
14. August 2006 @ 15:49 |
Link to this message
|
|
Version 1.4.8.0 (15 August 2006)
.Fixed the preferences's "Default" button crash. (sorry about that folks!).
.Added more debug code for some of the problems posted on the forum (keep the debug logs coming in case of a crash please!).
|
|
Advertisement
|
|
|
|
barbarali
Newbie
|
14. August 2006 @ 20:19 |
Link to this message
|
Ok,
I guess I will down load the Rip program and delete the AnyDVD before I install it.
But what is DL per Response above from Damon?
There are only a million DVD programs- I found nothing here about using Icopydvds2 with the Rip program, so I guess I need to get newer program.
Barbara
|
