|
|
|
Nokia Dbox2
|
|
Please note that the forum rules have changed. Posting of new codes is no longer allowed. See this thread for more information.
|
Senior Member
|
6. March 2008 @ 18:26 |
Link to this message
|
Originally posted by bryandir:
Originally posted by oggnogg:
Originally posted by bryandir:
hi there,i have the sportster image on my box,but i have lost most of the movie chanels,all other chanels are fine(except the sky sports 1 issue)i have rescanned about 3 times ,but i still cant find the movie channels,do you guys(big dunc) think it needs re-flashed?would i need to change the image?
what image is easiest to work and requires only a flash and scan to work?could i have a link to another image thats easy to use and guarenteed all chanels?
i know about the comando,tardis,etc images.
but what one is best?
im in the lanarkshire area.
thanks guys!!!
Check out my link below for a image for your box
thanks for the reply!!
what image do you recomend?
i dont care about the skysports one issue,just all the rest my good man!
im lazy,i need a sportster type image that requires only flashing and scanning..
cheers man!
bd
Try this one mate
http://oggnogg.4shared.com/account/file/...4993f/mtd3.html
|
|
Advertisement
|
 |
|
|
|
emmanneil
Junior Member
|
7. March 2008 @ 04:37 |
Link to this message
|
|
does anyone know how to setup the streaming of mp3s/pictures/movies from my PC to the dbox i have read two tutorials now and they both dont work for me , on says i need a patch which i can not find anywhere, any advice greatly appreciated
Thanks
thanks for everything
|
|
bryandir
Member
|
7. March 2008 @ 05:37 |
Link to this message
|
Originally posted by oggnogg:
Originally posted by bryandir:
Originally posted by oggnogg:
Originally posted by bryandir:
hi there,i have the sportster image on my box,but i have lost most of the movie chanels,all other chanels are fine(except the sky sports 1 issue)i have rescanned about 3 times ,but i still cant find the movie channels,do you guys(big dunc) think it needs re-flashed?would i need to change the image?
what image is easiest to work and requires only a flash and scan to work?could i have a link to another image thats easy to use and guarenteed all chanels?
i know about the comando,tardis,etc images.
but what one is best?
im in the lanarkshire area.
thanks guys!!!
Check out my link below for a image for your box
thanks for the reply!!
what image do you recomend?
i dont care about the skysports one issue,just all the rest my good man!
im lazy,i need a sportster type image that requires only flashing and scanning..
cheers man!
bd
Try this one mate
http://oggnogg.4shared.com/account/file/...d3.html
cheers man!
where is the download button?do i need to register with 4shared website?
cheers!
|
|
emmanneil
Junior Member
|
7. March 2008 @ 05:55 |
Link to this message
|
|
ignore my last comment i have been playing and have now done it thanks for reading
thanks for everything
|
Senior Member
|
7. March 2008 @ 05:57 |
Link to this message
|
Originally posted by bryandir:
Originally posted by oggnogg:
Originally posted by bryandir:
Originally posted by oggnogg:
Originally posted by bryandir:
hi there,i have the sportster image on my box,but i have lost most of the movie chanels,all other chanels are fine(except the sky sports 1 issue)i have rescanned about 3 times ,but i still cant find the movie channels,do you guys(big dunc) think it needs re-flashed?would i need to change the image?
what image is easiest to work and requires only a flash and scan to work?could i have a link to another image thats easy to use and guarenteed all chanels?
i know about the comando,tardis,etc images.
but what one is best?
im in the lanarkshire area.
thanks guys!!!
Check out my link below for a image for your box
thanks for the reply!!
what image do you recomend?
i dont care about the skysports one issue,just all the rest my good man!
im lazy,i need a sportster type image that requires only flashing and scanning..
cheers man!
bd
Try this one mate
http://oggnogg.4shared.com/account/file/...d3.html
cheers man!
where is the download button?do i need to register with 4shared website?
cheers!
use this link ikts handyer for ya to seach
http://oggnogg.4shared.com/
|
|
nicola1
Newbie
|
8. March 2008 @ 16:09 |
Link to this message
|
Please help
Got Nokia d-box 2, and cannot get rid of the audio description
Have tried to press the green key, and all I get is the radio.
Have then tried going to dbox, settings, and audio, but then I do not have an option to "turn selectable audio to on"
Getting v frustrated, as it's now on more channels than ever
Heeeeeelp pls
|
Senior Member
|
8. March 2008 @ 18:39 |
Link to this message
|
|
Reflash with a Differant image ,or follow below
Press dbox,settings,key setup,Tv/radio mode, select no key
Press home then user menu green,hi lite 0 and press ok untill it says audio selection.
Now home until you can press red to save settings.
Now try the green button.
Good luck ..............Paul
|
|
nicola1
Newbie
|
9. March 2008 @ 09:42 |
Link to this message
|
|
thanks very much for quick response.
Have followed instructions as far as TV/Radio mode, and selected no key, so no longer get radio everytime i press the green button, but then when I pressed home, I cannot find a user menu anywhere. Been through all menu screens and not spotted it.
Sorry for being thick but not very technically minded
not too sure if listing all the menu's i see would help you but here goes: 1=video, 2=audio, 3=parental lock, 4=network, 5=recording, 6=movie, 7=language, 8=colours, 9=LCD, 0=key binding (where I went to find TV/radio mode), blue=audio player, and yellow = miscellaneous
Currently got movie with Audio desc, so can easily tell that I have not got rid of the setting yet.
Please help, and thanks again, N
|
|
an1l
Newbie
|
9. March 2008 @ 12:37 |
Link to this message
|
Originally posted by sidders:
Quote:
Originally posted by karl1974:
Hi,,
looks like your ECM is not being updated, do you get the free to air channels, like BBC1 ITV1 etc
if so , I have a method where as you need to overwrite the existing key files and other ecm files.
Hi - I have this problem with keys not being updated with certain images - what do you do?
anil
|
|
LPOOLLAD2
Junior Member
|
9. March 2008 @ 13:09 |
Link to this message
|
|
BIGDUNC alright bigdunc just need a bit of help i flashed my dbox with a working blade image but i only recieve 109 channels so i put commando 8 back in and still only reciece 109 channels but i have star view box an recieve all channels do you think my d box is recked thanks mate
r jones
|
Senior Member
|
9. March 2008 @ 14:02 |
Link to this message
|
|
It only Finds 109 channels
Or finds more and only displays 109 channels
Try it on another feed ,Location..........Paul
|
|
bryandir
Member
|
11. March 2008 @ 04:27 |
Link to this message
|
hi guys.can i have a little help please?
someone has asked me to flash their sagem dbox.wil the dbox flashing assistand work along with a dbox 2 image?or do i need other stuff.
any help is appreciated guys!
cheers!
bryan
|
Senior Member
|
11. March 2008 @ 04:39 |
Link to this message
|
Originally posted by bryandir:
hi guys.can i have a little help please?
someone has asked me to flash their sagem dbox.wil the dbox flashing assistand work along with a dbox 2 image?or do i need other stuff.
any help is appreciated guys!
cheers!
bryan
You can us ethe Flash assit butyou cant use the dbox2 image on the sagem you gotta open the box and see how many chip is on the board which can only be x1 or x2 so if you go to my link below you will get all the images and files you need
|
|
bryandir
Member
|
11. March 2008 @ 08:48 |
Link to this message
|
Originally posted by oggnogg:
Originally posted by bryandir:
hi guys.can i have a little help please?
someone has asked me to flash their sagem dbox.wil the dbox flashing assistand work along with a dbox 2 image?or do i need other stuff.
any help is appreciated guys!
cheers!
bryan
You can us ethe Flash assit butyou cant use the dbox2 image on the sagem you gotta open the box and see how many chip is on the board which can only be x1 or x2 so if you go to my link below you will get all the images and files you need
hi mate,i have the lid off it,but where are the chips i count?
its a sagem box,old looking,sort of greyish in coulur,the model i think is a dnt1248-v90-d it says its a dbox KT.
any helps well appreciated,and also could you recomend an image from your link?
thanks mate!
bryan
|
Senior Member
|
11. March 2008 @ 09:09 |
Link to this message
|
Originally posted by bryandir:
Originally posted by oggnogg:
Originally posted by bryandir:
hi guys.can i have a little help please?
someone has asked me to flash their sagem dbox.wil the dbox flashing assistand work along with a dbox 2 image?or do i need other stuff.
any help is appreciated guys!
cheers!
bryan
You can us ethe Flash assit butyou cant use the dbox2 image on the sagem you gotta open the box and see how many chip is on the board which can only be x1 or x2 so if you go to my link below you will get all the images and files you need
hi mate,i have the lid off it,but where are the chips i count?
its a sagem box,old looking,sort of greyish in coulur,the model i think is a dnt1248-v90-d it says its a dbox KT.
any helps well appreciated,and also could you recomend an image from your link?
thanks mate!
bryan
have alook at the inside you will see how many chips are in it i would say u have 2 intel chips in that box just double check first
|
|
bryandir
Member
|
11. March 2008 @ 11:30 |
Link to this message
|
Originally posted by oggnogg:
Originally posted by bryandir:
Originally posted by oggnogg:
Originally posted by bryandir:
hi guys.can i have a little help please?
someone has asked me to flash their sagem dbox.wil the dbox flashing assistand work along with a dbox 2 image?or do i need other stuff.
any help is appreciated guys!
cheers!
bryan
You can us ethe Flash assit butyou cant use the dbox2 image on the sagem you gotta open the box and see how many chip is on the board which can only be x1 or x2 so if you go to my link below you will get all the images and files you need
hi mate,i have the lid off it,but where are the chips i count?
its a sagem box,old looking,sort of greyish in coulur,the model i think is a dnt1248-v90-d it says its a dbox KT.
any helps well appreciated,and also could you recomend an image from your link?
thanks mate!
bryan
have alook at the inside you will see how many chips are in it i would say u have 2 intel chips in that box just double check first
cheers mate.
it has 2 intel chips,what image would you say is easiest and best to flash it with.
cheers!!
|
Senior Member
|
11. March 2008 @ 12:04 |
Link to this message
|
Originally posted by bryandir:
Originally posted by oggnogg:
Originally posted by bryandir:
Originally posted by oggnogg:
Originally posted by bryandir:
hi guys.can i have a little help please?
someone has asked me to flash their sagem dbox.wil the dbox flashing assistand work along with a dbox 2 image?or do i need other stuff.
any help is appreciated guys!
cheers!
bryan
You can us ethe Flash assit butyou cant use the dbox2 image on the sagem you gotta open the box and see how many chip is on the board which can only be x1 or x2 so if you go to my link below you will get all the images and files you need
hi mate,i have the lid off it,but where are the chips i count?
its a sagem box,old looking,sort of greyish in coulur,the model i think is a dnt1248-v90-d it says its a dbox KT.
any helps well appreciated,and also could you recomend an image from your link?
thanks mate!
bryan
have alook at the inside you will see how many chips are in it i would say u have 2 intel chips in that box just double check first
cheers mate.
it has 2 intel chips,what image would you say is easiest and best to flash it with.
cheers!!
use the andromeoa sagem x2 image in my link and the dublin boq & service files in the other folder
|
|
bryandir
Member
|
11. March 2008 @ 13:15 |
Link to this message
|
Originally posted by oggnogg:
Originally posted by bryandir:
Originally posted by oggnogg:
Originally posted by bryandir:
Originally posted by oggnogg:
Originally posted by bryandir:
hi guys.can i have a little help please?
someone has asked me to flash their sagem dbox.wil the dbox flashing assistand work along with a dbox 2 image?or do i need other stuff.
any help is appreciated guys!
cheers!
bryan
You can us ethe Flash assit butyou cant use the dbox2 image on the sagem you gotta open the box and see how many chip is on the board which can only be x1 or x2 so if you go to my link below you will get all the images and files you need
hi mate,i have the lid off it,but where are the chips i count?
its a sagem box,old looking,sort of greyish in coulur,the model i think is a dnt1248-v90-d it says its a dbox KT.
any helps well appreciated,and also could you recomend an image from your link?
thanks mate!
bryan
have alook at the inside you will see how many chips are in it i would say u have 2 intel chips in that box just double check first
cheers mate.
it has 2 intel chips,what image would you say is easiest and best to flash it with.
cheers!!
use the andromeoa sagem x2 image in my link and the dublin boq & service files in the other folder
hi there,cheers for the great info,but how do i use the service and boq files?
do i drag them into the flashing assistant?
cheers!
|
Senior Member
|
11. March 2008 @ 13:28 |
Link to this message
|
Originally posted by bryandir:
Originally posted by oggnogg:
Originally posted by bryandir:
Originally posted by oggnogg:
Originally posted by bryandir:
Originally posted by oggnogg:
Originally posted by bryandir:
hi guys.can i have a little help please?
someone has asked me to flash their sagem dbox.wil the dbox flashing assistand work along with a dbox 2 image?or do i need other stuff.
any help is appreciated guys!
cheers!
bryan
You can us ethe Flash assit butyou cant use the dbox2 image on the sagem you gotta open the box and see how many chip is on the board which can only be x1 or x2 so if you go to my link below you will get all the images and files you need
hi mate,i have the lid off it,but where are the chips i count?
its a sagem box,old looking,sort of greyish in coulur,the model i think is a dnt1248-v90-d it says its a dbox KT.
any helps well appreciated,and also could you recomend an image from your link?
thanks mate!
bryan
have alook at the inside you will see how many chips are in it i would say u have 2 intel chips in that box just double check first
cheers mate.
it has 2 intel chips,what image would you say is easiest and best to flash it with.
cheers!!
use the andromeoa sagem x2 image in my link and the dublin boq & service files in the other folder
hi there,cheers for the great info,but how do i use the service and boq files?
do i drag them into the flashing assistant?
cheers!
The manual is there in my link you gotta download Cute FTP
|
|
bryandir
Member
|
11. March 2008 @ 15:54 |
Link to this message
|
Originally posted by oggnogg:
Originally posted by bryandir:
Originally posted by oggnogg:
Originally posted by bryandir:
Originally posted by oggnogg:
Originally posted by bryandir:
Originally posted by oggnogg:
Originally posted by bryandir:
hi guys.can i have a little help please?
someone has asked me to flash their sagem dbox.wil the dbox flashing assistand work along with a dbox 2 image?or do i need other stuff.
any help is appreciated guys!
cheers!
bryan
You can us ethe Flash assit butyou cant use the dbox2 image on the sagem you gotta open the box and see how many chip is on the board which can only be x1 or x2 so if you go to my link below you will get all the images and files you need
hi mate,i have the lid off it,but where are the chips i count?
its a sagem box,old looking,sort of greyish in coulur,the model i think is a dnt1248-v90-d it says its a dbox KT.
any helps well appreciated,and also could you recomend an image from your link?
thanks mate!
bryan
have alook at the inside you will see how many chips are in it i would say u have 2 intel chips in that box just double check first
cheers mate.
it has 2 intel chips,what image would you say is easiest and best to flash it with.
cheers!!
use the andromeoa sagem x2 image in my link and the dublin boq & service files in the other folder
hi there,cheers for the great info,but how do i use the service and boq files?
do i drag them into the flashing assistant?
cheers!
The manual is there in my link you gotta download Cute FTP
|
|
bryandir
Member
|
11. March 2008 @ 15:57 |
Link to this message
|
Originally posted by oggnogg:
Originally posted by bryandir:
Originally posted by oggnogg:
Originally posted by bryandir:
Originally posted by oggnogg:
Originally posted by bryandir:
Originally posted by oggnogg:
Originally posted by bryandir:
hi guys.can i have a little help please?
someone has asked me to flash their sagem dbox.wil the dbox flashing assistand work along with a dbox 2 image?or do i need other stuff.
any help is appreciated guys!
cheers!
bryan
You can us ethe Flash assit butyou cant use the dbox2 image on the sagem you gotta open the box and see how many chip is on the board which can only be x1 or x2 so if you go to my link below you will get all the images and files you need
hi mate,i have the lid off it,but where are the chips i count?
its a sagem box,old looking,sort of greyish in coulur,the model i think is a dnt1248-v90-d it says its a dbox KT.
any helps well appreciated,and also could you recomend an image from your link?
thanks mate!
bryan
have alook at the inside you will see how many chips are in it i would say u have 2 intel chips in that box just double check first
cheers mate.
it has 2 intel chips,what image would you say is easiest and best to flash it with.
cheers!!
use the andromeoa sagem x2 image in my link and the dublin boq & service files in the other folder
hi there,cheers for the great info,but how do i use the service and boq files?
do i drag them into the flashing assistant?
cheers!
The manual is there in my link you gotta download Cute FTP
cheers again fellow!
i have another problem.
i have never used a null modem cable or flashed a sagem box...i got the image you recomended in the flash assistant,and i press start,and plug in the box,a lot of writing comes on the screen,but the box never actually says FLASHING.What am i doing wrong?
there are some options ,but i didnt press anything,they were ..
1)console on null
2)console on ttyso
3)console on framebuffer
can you help me out?
cheers in advance!!
|
|
bryandir
Member
|
11. March 2008 @ 17:46 |
Link to this message
|
Originally posted by bryandir:
Originally posted by oggnogg:
Originally posted by bryandir:
Originally posted by oggnogg:
Originally posted by bryandir:
Originally posted by oggnogg:
Originally posted by bryandir:
Originally posted by oggnogg:
Originally posted by bryandir:
hi guys.can i have a little help please?
someone has asked me to flash their sagem dbox.wil the dbox flashing assistand work along with a dbox 2 image?or do i need other stuff.
any help is appreciated guys!
cheers!
bryan
You can us ethe Flash assit butyou cant use the dbox2 image on the sagem you gotta open the box and see how many chip is on the board which can only be x1 or x2 so if you go to my link below you will get all the images and files you need
hi mate,i have the lid off it,but where are the chips i count?
its a sagem box,old looking,sort of greyish in coulur,the model i think is a dnt1248-v90-d it says its a dbox KT.
any helps well appreciated,and also could you recomend an image from your link?
thanks mate!
bryan
have alook at the inside you will see how many chips are in it i would say u have 2 intel chips in that box just double check first
cheers mate.
it has 2 intel chips,what image would you say is easiest and best to flash it with.
cheers!!
use the andromeoa sagem x2 image in my link and the dublin boq & service files in the other folder
hi there,cheers for the great info,but how do i use the service and boq files?
do i drag them into the flashing assistant?
cheers!
The manual is there in my link you gotta download Cute FTP
cheers again fellow!
i have another problem.
i have never used a null modem cable or flashed a sagem box...i got the image you recomended in the flash assistant,and i press start,and plug in the box,a lot of writing comes on the screen,but the box never actually says FLASHING.What am i doing wrong?
there are some options ,but i didnt press anything,they were ..
1)console on null
2)console on ttyso
3)console on framebuffer
can you help me out?
cheers in advance!!
MANAGED TO FLASH THE SAGEM BOX,BUT IT SAYS CHANEL NOT FOUND ON EVERY CHANEL(OR SOMTHIN SIMILAR)I HAVENT GOT THE REMOTE TO DO A SCAN,DO YOU THINK IT JUST NEEDS A SERVICE SCAN?
CHEERS!
|
|
Happydaze
Newbie
|
14. March 2008 @ 07:02 |
Link to this message
|
DBOX2 IN SPAIN, The story continues....After 4 months of trial & error I appear to be one step closer to getting the bdox working in Spain. I removed Commander6 & flashed Enigma onto the box which gives the options of QAM settings (I still don't fully understand what this means, but anyway.....) then by ticking the box [INV] what-ever that is! Hey-presto a scan found all the available TV & Radio channels. So far so good. All the radio & S*y News work fine, but I think these are not encrypted in the 1st place. I get the EPG on the remaining channels but no picture/sound. So... at least I know the box works (result ! ) now I need to know how to un-scramble the remaining channels. Any Ideas ? Gracias Amigos
|
|
tippy1982
Newbie
|
14. March 2008 @ 15:40 |
Link to this message
|
Originally posted by gojet:
Originally posted by tippy1982:
Hello everyone
Can someone help me, I have a D-box2, I have around 130 channels which is fine but I have a friend who has 350+ channels including channels like setanta sports one which I haven?t got, we both have the same boxes, live a couple of streets apart I?ve checked every menu and all the codes and settings are the same, the only difference is that use different provider to me, they use cableuk(and four numbers) and I use bruteforceuk (something like that), this provider is the only way I can get channels. So can anybody help please.
hi ya tippy1982 ..you could take the box round to his house and try a scan and use the same setting he has on his box..to compare .to see if any better at his place .then take it back home too see if its ok at yours ???? good luck
Just been round my mates house, pluggin my dbox in and picked up the same channels that I was getting at my house,plug his dbox in at my house and I get all the channels that he has got, so its my box, still picks up over 300+ channels when scanning,but only offers 130ish when select the channel list, is my box blocking channels? am i doing something wrong? Can any body help? I was going upgrade but i dont know how? It came to me from germany with the software installed (commando 6), I got no cables, and no clues on how to do?
|
|
Advertisement
|
|
|
|
ikilledya
Newbie
|
21. March 2008 @ 14:20 |
Link to this message
|
Hi everyone.
I just need some assistance with my Nokia Dbox2.
My Dbox2 is displaying the following characters on the lcd (can't type the exact characters as there are stripes on the lcd):
BMon V1.0 MID
feID
fpID
65.33.02.07
HWrev
B/EX/F
It just turns on to that even after pulling out the power supply, nothing on the TV screen, nothing works in regards to the remote.
I've tried connecting to it using flash fxp, but I can't connect to it (maybe it's my poor skills on the flashfxp). Where do I download the flashing files/images from?
So does anyone have any ideas? Anyone else ever had this problem?
|
|
