|
The Official OC (OverClocking) Thread!
|
|
|
NO Fanboy comments needed
|
|
indienemo
Account closed as per user's own request
|
24. August 2004 @ 01:59 |
Link to this message
|
|
I was gonna start overclocking today , but my CPU fan isnt anywhere near up to scratch yet my friend says... (my cpu's temp is always between 70-74c, according to the temp diode), and i have good in case cooling! Whats a good CPU fan and what else can you recommend?
"Life is like a box of chocolates, whenever it comes to me all that is left is toffee logs" - Me.
------------------------------------------------------
PC: Athlon 64 X2 4200+ @ 2.4Ghz, 2GB DDR2, X850 PE GFX.
GC: Viper GC w. Cobra bios 1.2
X360: Kreon 1.0 Drive, Softmodded console
 |
|
Advertisement
|
|
|
|
|
askyew
Member
|
24. August 2004 @ 02:36 |
Link to this message
|
|
Thats too darn hot. List your system specs and I am sure we can find something to cool that sucker down.
P4 2.8c @ 3.2
Abit IC7-G
2x80 gb seagates barracudas
ATI AIW 9600 soft mod by w1zzard
2 x 256 pc 3200 Kingston valueram(hynix chips)
|
|
indienemo
Account closed as per user's own request
|
24. August 2004 @ 03:50 |
Link to this message
|
|
I listed 'em all, in full on the last page.. check em out! thanks
"Life is like a box of chocolates, whenever it comes to me all that is left is toffee logs" - Me.
------------------------------------------------------
PC: Athlon 64 X2 4200+ @ 2.4Ghz, 2GB DDR2, X850 PE GFX.
GC: Viper GC w. Cobra bios 1.2
X360: Kreon 1.0 Drive, Softmodded console
|
|
conny119
Suspended due to non-functional email address
|
24. August 2004 @ 05:14 |
Link to this message
|
|
so praetor wots your advice on those board i listed are any of them any good? Also how many forums are you admin of? where do you find the time?
|
|
Praetor
Moderator
|
24. August 2004 @ 06:30 |
Link to this message
|
Quote:
(my cpu's temp is always between 70-74c, according to the temp diode)
Thats PANIC temp.... are you running a stock heatsink?
Quote:
so praetor wots your advice on those board I listed are any of them any good?
See my reply on the previous page ... I actually replied this time :P
Quote:
Also how many forums are you admin of?
Several
Quote:
where do you find the time?
I dont sleep
|
|
indienemo
Account closed as per user's own request
|
24. August 2004 @ 06:32 |
Link to this message
|
|
im running a generic packard bell , heatsink and fan.. nothing special... what fan do you recommend?
"Life is like a box of chocolates, whenever it comes to me all that is left is toffee logs" - Me.
------------------------------------------------------
PC: Athlon 64 X2 4200+ @ 2.4Ghz, 2GB DDR2, X850 PE GFX.
GC: Viper GC w. Cobra bios 1.2
X360: Kreon 1.0 Drive, Softmodded console
|
|
conny119
Suspended due to non-functional email address
|
24. August 2004 @ 06:47 |
Link to this message
|
|
thanks praetor i've ordered
Asus A7N8X-X SKT mobo
Crucial 512MB DDR PC2700
AMD 2500+ barton
Gainward Fx5200 powerpack! Pro/660
when they come i'll be back askin for help on overclockin the whole system.
|
|
The_OGS
Senior Member
|
24. August 2004 @ 06:59 |
Link to this message
|
|
conny119 don't get PC2700 :-(
You need PC3200, it is the same price anyway.
You can then try the Barton on 400FSB
|
|
conny119
Suspended due to non-functional email address
|
24. August 2004 @ 08:02 |
Link to this message
|
|
thanks for the heads up.i've just noticed that there the same price im gonna have to cancel my order
|
|
Praetor
Moderator
|
24. August 2004 @ 11:03 |
Link to this message
|
Quote:
im running a generic packard bell , heatsink and fan.. nothing special... what fan do you recommend?
Anything really :P Something like the Silentboost K7 or the Volcano12 (both by Thermaltake) are good choices
Quote:
conny119 don't get PC2700 :-(
You need PC3200, it is the same price anyway.
You can then try the Barton on 400FSB
If its the same price yeah but if not, its not a big jump to OC from 166 to 200Mhz :) Also, you dont need PC3200 memory for running a Barton at 400Mhz ... the two clocks are independent :)
|
|
conny119
Suspended due to non-functional email address
|
24. August 2004 @ 12:03 |
Link to this message
|
|
so will it be OK to run it on the RAM I chose? whats the difference in all these PC3200 etc. with the PC 3200 i be agle to have the FSB @ 400? which is a HUGE differnce compared to my XP2200+ which FSB is 135
|
|
askyew
Member
|
24. August 2004 @ 15:33 |
Link to this message
|
|
Yes PC3200 is for a bus speed of 400mhz. The RAM speed i.e.3200 is how fast it transfers data in theory.3200 indicates that it can transfer at a speed of up to 3200mb/s or 3.2gb/s. When memory is installed in dual channel it will double the speed i.e. 3.2gb/s doubled equals 6.4gb/s. Remember this is the RAMs maximum speed and it is not always attainable. I have overclocked my RAM to ddr500(250fsb) and I still can only get ~5.9gb/s out of it. At stock speed(200) I get ~4.9gb/s from it.
_
P4 2.8c @ 3.2
Abit IC7-G
2x80 gb seagates barracudas
ATI AIW 9600 soft mod by w1zzard
2 x 256 pc 3200 Kingston valueram(hynix chips)
This message has been edited since posting. Last time this message was edited on 25. August 2004 @ 06:41
|
|
indienemo
Account closed as per user's own request
|
25. August 2004 @ 03:48 |
Link to this message
|
|
How do you overclock ram? i have two ram chips on my mobo: a kingston 256mb, and a samsung 512mb both DDR 2700.. my PC's fsb is 333mhz, thanks
"Life is like a box of chocolates, whenever it comes to me all that is left is toffee logs" - Me.
------------------------------------------------------
PC: Athlon 64 X2 4200+ @ 2.4Ghz, 2GB DDR2, X850 PE GFX.
GC: Viper GC w. Cobra bios 1.2
X360: Kreon 1.0 Drive, Softmodded console
|
|
askyew
Member
|
25. August 2004 @ 06:20 |
Link to this message
|
|
By upping the fsb speed it ups the bus on all mb components. Most motherboards built for overclocking give several options in the BIOS. I lock my AGP and PCI to 33/66 mhz(if your mb doesn't have a lock then it probably has a divider see below) which is default then set the ram ratio to 1:1 to the bus speed this will make the ram run at the fsb speed. If I decide to go to 255fsb windows wont load and at 260 my rig wont post if the ram is 1:1 at any ram voltage this makes 250mhz fsb my max overclock for my ram at 1:1. I can change the divider for my ram to 5:4 and raise the fsb to 275 and this will take the ram to 220mhz. This is done by ratio. Now my ram is running at 4/5 of my fsb(4/5 of 275=220). If you cant understand how I explained it dont be bashful, ask and maybe someone can explain it better.
Wow I need a nap my brain is gone I hope I got it edited right this time.
__
P4 2.8c @ 3.2
Abit IC7-G
2x80 gb seagates barracudas
ATI AIW 9600 soft mod by w1zzard
2 x 256 pc 3200 Kingston valueram(hynix chips)
This message has been edited since posting. Last time this message was edited on 25. August 2004 @ 06:33
|
|
The_OGS
Senior Member
|
25. August 2004 @ 06:23 |
Link to this message
|
Quote:
you dont need PC3200 memory for running a Barton at 400Mhz
You might not need PC3200 but you do have to run the memory at 400MHz :-)
The CPU can be run slower than the memory, but not vice-versa!
It just doesn't make sense for anybody to purchase less than PC3200 for any purpose, even 133(266DDR) FSB.
|
|
askyew
Member
|
25. August 2004 @ 06:51 |
Link to this message
|
|
You can run the memory slower than the cpu by setting the divider. I.E. 200fsb@5:4=160 mhz and pc2700 is 166 mhz ram. personally I would rather try to overclock my pc2700 ram to 3200 speed. This should be an easy to obtain overclock on the ram. If not then overclock the cpu at the 5:4 divider to reach the rams rated speed. But you are right about buying the pc3200 to start with would be the best way to go.
P4 2.8c @ 3.2
Abit IC7-G
2x80 gb seagates barracudas
ATI AIW 9600 soft mod by w1zzard
2 x 256 pc 3200 Kingston valueram(hynix chips)
|
|
The_OGS
Senior Member
|
25. August 2004 @ 07:14 |
Link to this message
|
|
Not in AMD-land you can't ;-)
If I run my Barton @ 166/333 (stock) I can choose 5:5 (synchronous) or 5:6 (asynchronous) memory.
There was much discussion about how 333FSB with 400 memory offers insignificant performance increase (not enough improvement to offset latency introduced by asynchronous operation) so I would choose 5:5 and run the memory synchronously @ PC2700 with aggressive timings - memory's underclocked, right?
But to change AMD to 200/400FSB you MUST run PC3200, you cannot run 166/333 PC2700.
No 6:5, nosiree - memory can be faster, but not slower.
In AMD-land that is, but I would be surprised to learn that Intel permits this!
If your mobo runs P4 200/800FSB you are saying you can run 166/333 memory with that!?
Not with AMD.
Regards
ABit AB9 Pro
Intel Core 2 Duo E6420 @ 2.4GHz
2GB OCZ PC2-6400 Platinum XTC R2
ATI Radeon X1900XT 512MB
Enermax Liberty 620W
320GB/16MB WD, 150GB/16MB Raptor
Plextor PX-755SA DVD (SATA)
|
|
The_OGS
Senior Member
|
25. August 2004 @ 07:30 |
Link to this message
|
|
BTW indienemo 70-74c seems a touch WARM ;-) LoL
Can you say 'EasyBake oven'?
(Oh man you guys probably never heard of that - it's what every young daughter wanted for Xmas decades ago. It's a little baking oven, powered by a 60 watt lightbulb! Got bloody hot, too.)
Getcher self a Volcano7 or something with an 80mm fan and some Copper - doesn't need to weigh 800grams or whatever, just maybe 350grams but including some penny-metal.
L8R
|
|
askyew
Member
|
25. August 2004 @ 07:41 |
Link to this message
|
|
In intel land you can do anything. I can change the northbridge strap to 400(100fsb),533(133fsb),667(166fsb), or 800(200fsb)if I want. This would downclock my cpu speed of course but I can run any ram I want to with it. The Bios options with this board are unbelievable.
P4 2.8c @ 3.2
Abit IC7-G
2x80 gb seagates barracudas
ATI AIW 9600 soft mod by w1zzard
2 x 256 pc 3200 Kingston valueram(hynix chips)
|
|
cah87
Suspended due to non-functional email address
|
25. August 2004 @ 21:22 |
Link to this message
|
|
hi you all my name is chris and im a hardcore intel man =D lol, but i want to go AMD and overclocking
okay my setup will be::
watercooled and i was wondering what kind of overclocking numbers i could get i would like a cheaper processor but a real nice MOBO for overclockking like an ASUS so which processor should i use that is less then $220
and what kind of overclocking numbers should i see at the maximum (watercooled) Thanks
-Chris
Edit:: also i was wondering if i could OC the FSB and memory speeds?????
|
|
askyew
Member
|
25. August 2004 @ 23:09 |
Link to this message
|
P4 2.8c @ 3.2
Abit IC7-G
2x80 gb seagates barracudas
ATI AIW 9600 soft mod by w1zzard
2 x 256 pc 3200 Kingston valueram(hynix chips)
|
|
Praetor
Moderator
|
26. August 2004 @ 08:46 |
Link to this message
|
Quote:
In intel land you can do anything. I can change the northbridge strap to 400(100fsb),533(133fsb),667(166fsb), or 800(200fsb)if I want. This would downclock my cpu speed of course but I can run any ram I want to with it. The Bios options with this board are unbelievable.
Thats not a feature of "Intel" but rather the mobo :)
Quote:
I hope it is ok that I posted a link to another forum
No its not okay! LOL nah just kiddin :P
|
|
cah87
Suspended due to non-functional email address
|
26. August 2004 @ 16:22 |
Link to this message
|
|
no one is responding to me on the other site ... :(
|
|
askyew
Member
|
26. August 2004 @ 19:24 |
Link to this message
|
|
I have never posted there but I just find thread titles and read about set ups and results. I always bear in mind that not everyone can be pleased and some people cause their own problems. Also I did alot of research on the abit forum.
My board is mostly made of intel(canterwood,ICH5-R). The chipsets limit the board features and the intel ones seem to offer more. I am not trying to be a fan boy but I did alot of research on both(amd,intel) and the intel boards seem to be more overclockable and stable. This is not saying that amd doesn't make a better processor but the boards for them seem more limited. I have read about alot of the amd boards having problems with their agp/pci locks while reaching for higher fsb speeds. I do like the way that alot of amd chips allow you to run the multiplier lower so that you can get higher bus speeds and keep the processor at rated speed(see not voiding warranty). I have read alot of good things about the KV8pro chipsets but the lock still appears to have problems at higher bus speeds. If you have a SATA drive this can cause data corruption or so I have read.
P4 2.8c @ 3.2
Abit IC7-G
2x80 gb seagates barracudas
ATI AIW 9600 soft mod by w1zzard
2 x 256 pc 3200 Kingston valueram(hynix chips)
|
|
Advertisement
|
|
|
|
remmoc
Newbie
|
30. August 2004 @ 09:00 |
Link to this message
|
|
hi i have a amd 64 3000+ , soltek nforce 3 250gc mobo, radeon 9800xt, 512 mb pc-3500 ram, what commands do i need to use to overclock this, especially so my comp can utilize my 433 ram
|
