|
Shy Channels on sat with dreambox 500s
|
|
Senior Member
|
23. July 2010 @ 22:01 |
Link to this message
|
|
sorry mate i appolagise i misunderstood your post ,i also as i said have a netopia and had a lot of problems and in the end i got another router(which is what i said) .i was only trying to help but i wont help or answer your posts again.
|
|
Advertisement
|
|
|
|
|
EAMO_TOO
Senior Member
|
23. July 2010 @ 22:54 |
Link to this message
|
Originally posted by piopat:
sorry mate i appolagise i misunderstood your post ,i also as i said have a netopia and had a lot of problems and in the end i got another router(which is what i said) .i was only trying to help but i wont help or answer your posts again.
Don't be so touchy, Pio. You know how frustrating it is when box won't connect to
network. Chap is only letting off steam. You don't need to apologise to anyone on here.
You have helped countless members on this forum, & if I'm not mistaken you started this
thread, which now contains a mine of information. Keep the faith.
|
|
jicjoc
Junior Member
|
24. July 2010 @ 07:31 |
Link to this message
|
|
Question about the quality of your dm500s guys.
I had a dm500t that never froze or dropped signal, then a dm500c that was forever freezing.
Both from dvbseller.com. Probably clones
Have you had any freezing/signal dropping issues?
And where did you get yours.
Thanks
Ps - anyone any expierence with the Vu+ duo? Looks a serious machine... :)
|
Senior Member
|
24. July 2010 @ 10:04 |
Link to this message
|
Originally posted by piopat:
sorry mate i appolagise i misunderstood your post ,i also as i said have a netopia and had a lot of problems and in the end i got another router(which is what i said) .i was only trying to help but i wont help or answer your posts again.
Was only joking Pat, your help is appreciated as always!!!
Whatever you say, say nothing when you talk about you know what for if you know who might hear you, you know what youll get. Youll be sent off to you know where for you would not know how long. Maybe I could search through the threads so you dont have to ??
|
Senior Member
1 product review
|
24. July 2010 @ 13:34 |
Link to this message
|
|
Don't be so touchy, Pio. You know how frustrating it is when box won't connect to
network. Chap is only letting off steam. You don't need to apologise to anyone on here.
You have helped countless members on this forum, & if I'm not mistaken you started this
thread, which now contains a mine of information. Keep the faith.
Frustrating is not the word, it's enough to make you pull your hair out as we all know.
|
Senior Member
|
25. July 2010 @ 14:05 |
Link to this message
|
|
so sg8 did you have any joy. jicjoc, freezing issues are associated with your provider not the box. this is true both in the case of sharing and connecting directly to a provider network
|
Senior Member
|
25. July 2010 @ 17:19 |
Link to this message
|
|
Did not get a chance to check it out yet!, but will do tomorrow by the looks of things.
Whatever you say, say nothing when you talk about you know what for if you know who might hear you, you know what youll get. Youll be sent off to you know where for you would not know how long. Maybe I could search through the threads so you dont have to ??
|
Senior Member
|
26. July 2010 @ 13:16 |
Link to this message
|
Originally posted by fintannl:
if you do not get an ip address assigned to the dreambox you have a faulty network cable
Spot on Fintan!! Got a new cable today and everything is up and running!! Will bring two with me if I ever do it again!
Thanks again
Whatever you say, say nothing when you talk about you know what for if you know who might hear you, you know what youll get. Youll be sent off to you know where for you would not know how long. Maybe I could search through the threads so you dont have to ??
|
Senior Member
|
27. July 2010 @ 18:03 |
Link to this message
|
|
good for you. up to my elbows on dd-wrt at the moment. took two days to reprogram my router (extra one). checking out to see how a dumb router can repeat wireless signals. so far results are very neat
|
|
Hubabubas
Junior Member
|
7. August 2010 @ 16:04 |
Link to this message
|
|
nabilosat darkstar 11, or is it 2, followed the tut, but when loaded with a cline i was left with cats head with a flashing NABILOSAT, unable to use remote, i had to load some other image just to get it working, i'm back to free to air. any help appreciated.
for some reason i have been wiped off the site? I rejoined using my old user name with an S on the end, if the mod would have a look please.
Thanks in advance
This message has been edited since posting. Last time this message was edited on 7. August 2010 @ 16:11
|
Senior Member
|
8. August 2010 @ 12:56 |
Link to this message
|
|
image is irrelevant. all that matters is correct cccam setup. if you had a working situation prior to loading image then it should also work afterwards. many images available on the web are corrupt. so its trial and error
|
|
Hubabubas
Junior Member
|
8. August 2010 @ 13:12 |
Link to this message
|
I have loaded darkstar2 added transponders, back to free to air,then I go to load edit cccam, and it is not there, do I have to load every cam back on to the dreambox 500s, i erased averything on re-loading Darkstar , get all three with greenline, go to edit cccam, but not there to edit.Sorry i'm repeating myself. Any help please.
|
Senior Member
|
8. August 2010 @ 13:27 |
Link to this message
|
you must be online with the box. therefore use the blue button to download cccam 2.1.4. next use flashfxp to transfer cccam.cfg from /var/etc to your local computer. then put whatever information you need to put in there and transfer it back to /var/etc
|
|
Hubabubas
Junior Member
|
8. August 2010 @ 13:33 |
Link to this message
|
|
Thanks fintannl, I will try later as I have to go out for now.
I will let you know later if it works.
|
|
tjspock
Newbie
|
9. August 2010 @ 06:49 |
Link to this message
|
hi all ihave a problem with dreambox 500,i have a dm 600 as server for 20 clients no problems there,but i got a dreambox 500 for a neighbour and set up the clines and flines accordingly but when i try to connect to my server the cccam info says 4 online but no cards and a red dot before it ,has any one ideas on what i'm doing wrong?
|
Senior Member
|
9. August 2010 @ 08:15 |
Link to this message
|
|
I would say if you got all that set up yourself, you probably know more about this stuff than most of the people on here!!
If you want to PM me a cline, I could test it for you !!
Whatever you say, say nothing when you talk about you know what for if you know who might hear you, you know what youll get. Youll be sent off to you know where for you would not know how long. Maybe I could search through the threads so you dont have to ??
|
|
tjspock
Newbie
|
11. August 2010 @ 08:23 |
Link to this message
|
|
ok this is doing my head in!!!i started a few months ago learning as much as i could about cs,bought a dm 600 a cyfra card and tried to share,got as far as seeing the clines sent to me and opened channels but could not share my card,found out that i had to upgrade my isp to business package so i could port forward and share my card,job done so i thought!!!sharing no problem with fellows from europe,got another dm 600 for bedroom a dm 800 for sitting room all internal and sharing no problem,now i want to share with my brother on the same isp and all i'm getting is server online 0 cards seen, have put a cline from one of my clients in brothers box and it works but put my cline in and it does'nt. his box is a dm 500 my isp is permanet any ideas please!!!!!?????
|
Senior Member
|
12. August 2010 @ 17:52 |
Link to this message
|
|
its a typo in your client cccam.cfg cline as compared to the fline on your server. it happens. maybe you forgot to put the port in the cline, maybe the username and password just do not match (check uppercase, lowercase), maybe your dyndns hostname is not spelt correctly and of course always restart the cam after putting the new cccam.cfg in /var/etc. what i suggest you do is put the working cline from your other client in the cccam.cfg then modify it as necessary as you wish for your brother. then go to your server and double check that username and password is the same. also check that the parameters after the username and password in the fline on the server do in fact correspond to the working client line that you have used on your brothers machine
|
|
tjspock
Newbie
|
13. August 2010 @ 03:47 |
Link to this message
|
hi fintannl,thing is when i type my dyndns into my browser it goes to my dreambox,when i goto my brothers house 100 yards away with the same provider no luck ,also checked with 2 neighbours same result yet i'm sharing with europe and sg8 can see me aswell!!?????????
|
Senior Member
|
13. August 2010 @ 12:14 |
Link to this message
|
ok for starters its really dangerous to be allowing access on port 80 on your router to your dreambox. next, lets get the basics sorted. when you check the brothers dreambox via blue button can you confirm that the dreambox has a valid ip address. you should also be able to login to the brothers modem and verify that the modem has assigned a valid ip address to the dreambox. please confirm that this is the case first
|
|
tjspock
Newbie
|
14. August 2010 @ 07:29 |
Link to this message
|
thanks for your time fintanll, dreambox is password protected ,dreambox has valid ip all connected,can use dcc and ftp and add clines no problem
|
Senior Member
|
14. August 2010 @ 14:08 |
Link to this message
|
weird. you should not be able to connect to your dreambox from a computer within your network. you should always get the router login page. also to be able to connect from your brothers house/neighbours house to your dreambox you must first port forward port 80 on your router to your dreambox internal ip. i suggest when you do this then you will be able to access the dreambox configuration page from your brothers house. and when you do this it only confirms my viewpoint that your cline or fline is not correctly written
cline would be
c: dyndnshostname 12000 username password no
fline would be
f: username password 2 0 1 { 0:0:1 }
please confirm this format and also confirm that you can access your dreambox from your brothers house after you port forward port 80 on your router. note once this test is complete you should remove this port forwarding.
also can you confirm that you are using cccam 2.1.4 on all boxes
|
|
jackoooh
Member
|
14. August 2010 @ 16:54 |
Link to this message
|
Originally posted by fintannl:
weird. you should not be able to connect to your dreambox from a computer within your network. you should always get the router login page. also to be able to connect from your brothers house/neighbours house to your dreambox you must first port forward port 80 on your router to your dreambox internal ip. i suggest when you do this then you will be able to access the dreambox configuration page from your brothers house. and when you do this it only confirms my viewpoint that your cline or fline is not correctly written
cline would be
c: dyndnshostname 12000 username password no
fline would be
f: username password 2 0 1 { 0:0:1 }
please confirm this format and also confirm that you can access your dreambox from your brothers house after you port forward port 80 on your router. note once this test is complete you should remove this port forwarding.
also can you confirm that you are using cccam 2.1.4 on all boxes
Fintannl you say in youre post use ccam 2.1.4 yet piopat says use ccam 2.1.3 which is correct or does it matter once all boxes internal sharing have the same ccam
j casey
|
|
tjspock
Newbie
|
14. August 2010 @ 20:18 |
Link to this message
|
port 80 is forwarded in my router, still cannot connect to my dreambox from my brothers or neighbours ,from my own network i can connect to my own dreambox .must i have cccam 2.1.4 in all boxes?i have 2.1.3 in my server
|
|
Advertisement
|
|
|
Senior Member
|
15. August 2010 @ 05:03 |
Link to this message
|
no cccam 2.1.3 is fine on the server. ok if you have port 80 forwarded then it must be an ip update issue. can you check dyndns to make sure your ip is updated. also i suggest that you activate inadyn on your dreambox as a method of updating your ip. if this is ok then i get the impression that the port on your router to access the dreambox is being blocked. are you using port 12000. use portchecker to see that port is open
|
