|
Devhook .51 Easy Installer Eboot Version
|
|
|
isaf
Junior Member
|
9. December 2006 @ 02:10 |
Link to this message
|
|
I have the same problem as you whaworth console randomly turns off, have you sorted it if so how. Also how do you change between ISO's ?
Cheers
ranger.
|
|
Advertisement
|
|
|
|
|
Draseri
Newbie
|
9. December 2006 @ 03:43 |
Link to this message
|
|
6.) extract devhook and put the launcher files in ms0:\PSP\GAME and place the DH folder in the root of your memory stick. you can also simply copy and paste it but in the guide that comes with the installer states you need the fbm folder but I found it runs fine without it.
7.) Start the devhook firmware installer and press X when it prompts you on screen. It will now install all the firmware files for devhook. No more BSOD. When it's finished you can now boot devhook with 3.01 support.
Through these steps i got completely lost. Ok so i finished the guide..and went to psp game and i saw the devhook icon... but another icon that said corrupt data.. is that supposed to be there.. and weres the devhook installer icon sopposed to be on my psp.. that getting me confused.
Im confused by the whole thing.. to be honest but iunno @_@ could someone help me to correctly install this thing properly. Im used to the self-installer for 0.46 thats why im having trouble with all of this.
|
|
bullhorn
Newbie
|
9. December 2006 @ 04:30 |
Link to this message
|
|
Im well confused!!!! iwhen i start up mu USB i only have a PSP folder in there, im sure im missing one, can someone please just help me get this on here and tell me what the hell im doing wrong....lol, obviously im a total noob, but hey i need some help guys!!!
|
|
minimoose
Junior Member
|
9. December 2006 @ 07:12 |
Link to this message
|
Quote:
Thats the problem then. You have to install to flash1. Its like the step where you launch DevHook and then go to FLASH ROM and then select "flash configfiles to flash1:". Do that and it should work.
That sounds about right, but my issue seems to be the devhook program then. When I launch it I just get this screen with no actual input options
Is it possible I didn't do something prior to this point that would cause devhook not to allow any input?
Thanks for the help
|
|
10spro
Junior Member
|
9. December 2006 @ 07:50 |
Link to this message
|
|
Hope eternalis can address our issues soon.
|
|
minimoose
Junior Member
|
9. December 2006 @ 08:02 |
Link to this message
|
|
what kind of tech support is this?!! ;)
hahaha, I kid, I kid! Seriously though I love the great info people like eternalis gives people like me here. It's an invaluable service they're providing. thanks
Anyway, I think I figured it out, but I'm stuck elsewhere now. I did not have the eboot file at the root of my memory stick so I put that there and ran the FW installer app which successfully ran through. So, I launched devhook which now has the familiar menu I was previously missing. However, when I go to the UMD SELECT option and select File Emulation (to access ISO files in the ISO folder at the root right?) it says No File despite me having an ISO folder with files in it... Did I miss something? Do I have to still run through the 'Install configfile to flash1' option? When I clicked on that it came up with some scary looking red text. Can I brick it by running through this process?
This message has been edited since posting. Last time this message was edited on 9. December 2006 @ 08:22
|
|
isaf
Junior Member
|
9. December 2006 @ 08:19 |
Link to this message
|
|
Draseri I'm no expert and I'm having probs too, but the devhook installer is on the psp games menu, memory card. there you will see devhook as before. I was confused by this as well.
Cheers
ranger
|
|
10spro
Junior Member
|
9. December 2006 @ 08:29 |
Link to this message
|
|
minimoose I had the same issue, with the iso game not showing even though I know it's there. I did click on the install configfile to flash 1 even though I saw those red letters but it was fine. Now when you get to start devhook, you'll see something like UMD game and the other option is emulation. Press on to your right button and wait a couple of seconds and your iso game all of the sudden shows up and then you can play your game. One thing 3.02 doesn't have compared to 3.01 is the update icon on the PSP stating which version you have, at least I don't see it on mine.
|
|
minimoose
Junior Member
|
9. December 2006 @ 08:45 |
Link to this message
|
Originally posted by 10spro:
minimoose I had the same issue, with the iso game not showing even though I know it's there. I did click on the install configfile to flash 1 even though I saw those red letters but it was fine. Now when you get to start devhook, you'll see something like UMD game and the other option is emulation. Press on to your right button and wait a couple of seconds and your iso game all of the sudden shows up and then you can play your game. One thing 3.02 doesn't have compared to 3.01 is the update icon on the PSP stating which version you have, at least I don't see it on mine.
Thanks for the response. Ok, so I choose emulation, it says no file still but I choose devhook menu and start. The psp reboots to 3.02 as it should with the vshex devhook setting menu overlaid. I hit right like you describe and UMD:ms0:/IOS/gametitle.iso shows at the bottom left of the screen. That looks promising, but when I close the menu nothing happens and it won't let me escape the devhook although I don't know if I'm even supposed to... At any rate next to FIRMWARE and REMOTE PORT it says 'not supported' in the devhook menu. Could that be my problem? Any ideas? Thanks
This message has been edited since posting. Last time this message was edited on 9. December 2006 @ 08:45
|
Member
|
9. December 2006 @ 09:08 |
Link to this message
|
|
can u delete the update folder when youve got the devhook .51
|
|
10spro
Junior Member
|
9. December 2006 @ 09:08 |
Link to this message
|
|
You're on the right track. Just keep pressing emulation to the right until you see your iso info at the bottom left of the screen. Once you see the game, just close devhook and move up to the UMD icon, just above the update icon (which I finally got it) and voila. It takes about 5 seconds for the iso to load.
|
Senior Member
|
9. December 2006 @ 09:18 |
Link to this message
|
|
everytime i use the Devhook easy eboot installer it does this...
looking for update eboot on ms0:/eboot.pbp
found update eboot!
extracting PSAR....!
Done!
Failed to create report file
Stick may be full or can't create OUT folder
then i have to shut my psp off and turn it back on and i try to install again it does the same thing....I have 62 mb becaues i have games on my mem stick..is this space to small should i delete the iso?
|
|
et3rnalis
Suspended permanently
|
9. December 2006 @ 09:31 |
Link to this message
|
@Thoatih- You have to copy DevHook to your memory stick first otherwise that error comes up. So download DevHook 0.51 from here: http://www.psp-hacks.com/file/940
Then copy the dh, fbm and PSP folders to the root of your memory stick and press Yes if it asks you to replace.
BTW I'm back! Sorry mods for making a new account but I think I deserve to because my previous one was banned mistakenly. Also I may take a while to reply as since I'm a newbie now I have to wait 3 mins between posts :(
Quote:
can u delete the update folder when youve got the devhook .51
Yes you can.
Quote:
Hi Eternalis
I followed the instructions and did the button swap thing, but I don;t think I did any config files in flash.
Could you direct me to the right bit and I would be eternally gratefull as i feel so close to getting it sorted.
Thanks in advance
Just launch DevHook 0.51, then go to FLASH ROM and then select "install configfiles to flash1:". Then hold down circle for 1 second and it will begin flashing. Then your buttons should swap.
I used to be eternalis
 This message has been edited since posting. Last time this message was edited on 9. December 2006 @ 09:34
|
|
minimoose
Junior Member
|
9. December 2006 @ 10:00 |
Link to this message
|
Originally posted by 10spro:
You're on the right track. Just keep pressing emulation to the right until you see your iso info at the bottom left of the screen. Once you see the game, just close devhook and move up to the UMD icon, just above the update icon (which I finally got it) and voila. It takes about 5 seconds for the iso to load.
I would but my umd option disappears once I hit emulation. Could it be the iso maybe? All I have now is Game Sharing, Certificate Utility, Saved Data Utility and Memory Stick.
|
|
et3rnalis
Suspended permanently
|
9. December 2006 @ 10:03 |
Link to this message
|
|
Sorry minimoose I think it was a problem in my 3.02 package.
Anyway, go to ms0:/dh/05beta/menu. Then open up menu_umd.txt and change usbhost0:/ISO to ms0:/ISO
Sorry I accidentally put that file in. I was experimenting with usbhost on DevHook 0.51 :)
I used to be eternalis
|
|
minimoose
Junior Member
|
9. December 2006 @ 10:16 |
Link to this message
|
|
It looks like that was the problem. I changed it and even in the first initial devhook menu when I chose emulation the iso showed up. However, when starting devhook the system got to the 'Sony Computer Entertainment' splash screen and locked up. Is this common?
|
|
et3rnalis
Suspended permanently
|
9. December 2006 @ 10:23 |
Link to this message
|
No thats not common.
Did you install the configfiles after selecting firmware 3.02 in the FIRMWARE menu?
BTW I made a new DevHook 3.02 installer mod, download it from here:
http://www.megaupload.com/?d=MRW5GVB4
In this one the previous problem of the ISO not showing up is fixed plus it uses the new DevHook 0.51.01.
I used to be eternalis
This message has been edited since posting. Last time this message was edited on 9. December 2006 @ 10:24
|
|
minimoose
Junior Member
|
9. December 2006 @ 10:27 |
Link to this message
|
|
You have to go through the configfile option each time you want to run devhook? I added the 3.02 eboot file then ran through the configfile if that's what you are referring to. I'll give the new FW installer a try then.
|
|
et3rnalis
Suspended permanently
|
9. December 2006 @ 10:30 |
Link to this message
|
|
No you dont have to do that every time you run DevHook.
I mean after you have run my installer mod, then run DevHook go to FIRMWARE and choose 3.02. Then go to FLASH ROM-->install configfiles to flash.
I used to be eternalis
|
|
10spro
Junior Member
|
9. December 2006 @ 10:34 |
Link to this message
|
|
Welcome back et3rnalis, I'll try your new 3.02 and see if my iso folder appears this time. Just overwrite all the folders correct? Anything else?
|
|
et3rnalis
Suspended permanently
|
9. December 2006 @ 10:37 |
Link to this message
|
|
Yep just overwrite everything. It might be better if you format your memory stick and then install using the new installer.
Its nice to be back. But hopefully I can get my post count back (it sucks being a newbie, I have to wait 3 mins after each post).
I used to be eternalis
|
|
10spro
Junior Member
|
9. December 2006 @ 10:38 |
Link to this message
|
Originally posted by et3rnalis:
No thats not common.
Did you install the configfiles after selecting firmware 3.02 in the FIRMWARE menu?
BTW I made a new DevHook 3.02 installer mod, download it from here:
http://www.megaupload.com/?d=MRW5GVB4
In this one the previous problem of the ISO not showing up is fixed plus it uses the new DevHook 0.51.01.
When I open up your files it has step 1 and step 2. It deals up to 3.01 though. Not 3.02.
|
|
VK_Zone
Junior Member
|
9. December 2006 @ 10:40 |
Link to this message
|
|
Hex, I have a few questions on the 0.51 and I was wondering if I can contact you in a way where we can have a live chat in stead of posting, if you do not want to give me your email can we meet in an IRC of some sort?
Please reply and if you dont want to give your email addy then I'll arrange a place where we can meet.
I'm just doing this because I can't seem to grasp instructions and directions in a one dimensioned post :p
~ VK
Pro is good
Con is bad
Progress is moving forward
I wonder what Congress means.
|
|
minimoose
Junior Member
|
9. December 2006 @ 10:43 |
Link to this message
|
Originally posted by et3rnalis:
No you dont have to do that every time you run DevHook.
I mean after you have run my installer mod, then run DevHook go to FIRMWARE and choose 3.02. Then go to FLASH ROM-->install configfiles to flash.
I ran through it all again using the new file set but I still get a lock up when rebooting into 3.02 after setting up devhook. any ideas?
|
|
Advertisement
|
|
|
|
et3rnalis
Suspended permanently
|
9. December 2006 @ 10:45 |
Link to this message
|
Quote:
Originally posted by et3rnalis:
No thats not common.
Did you install the configfiles after selecting firmware 3.02 in the FIRMWARE menu?
BTW I made a new DevHook 3.02 installer mod, download it from here:
http://www.megaupload.com/?d=MRW5GVB4
In this one the previous problem of the ISO not showing up is fixed plus it uses the new DevHook 0.51.01.
When I open up your files it has step 1 and step 2. It deals up to 3.01 though. Not 3.02.
What do you mean? Are you talking about the readme? Because thats basically the original readme of tommydanger's original installer, I just changed 3.01 to 3.02.
@minimoose- What firmware are you on? Is this just with a particular ISO? If so the ISO could be corrupted.
@VK_Zone- I think I can help you. Do you have MSN?
I used to be eternalis
This message has been edited since posting. Last time this message was edited on 9. December 2006 @ 10:47
|
