|
Replay Lite
|
|
Please note that the forum rules have changed. Posting of new codes is no longer allowed. See this thread for more information.
|
Senior Member
|
14. June 2008 @ 09:37 |
Link to this message
|
Thanks Brian and TheStig85 :)
I've done as you said and unplugged and re-plugged and it seems to be fine now so thanks :)
I'll also do as you said and save the channel .txt file to my desktop for future ref.
I've downloaded the STBlink.exe and I'll be sure to do that later on as the wife is hogging the tv and the minute lol
At least I know how to read and install a channel dump as today I knew nothing on the replay lite.
I've also bookmarked this thread and I'll give it a going over tonight after the footie as I'd also like to know how to install the latest firmware ect... for future probs..
Thanks again guys :)
|
|
Advertisement
|
|
|
|
Senior Member
|
14. June 2008 @ 10:41 |
Link to this message
|
Originally posted by pssnger57:
hi all,
is it just mine or since flashing with 910 file has everyones lite tend to freeze up for a few seconds quite a bit more often.....
let me know if its just in my head or not
might be work in the area but mine does freez the odd time but not much so dont panic about it
|
Senior Member
|
14. June 2008 @ 11:25 |
Link to this message
|
Hi fellas, I'm just going back to my orininal post regarding the sync issue I seem to be having....
I just sat down now and I can still notice it on some channels more than others... it's enough to do your head in :(
I've tried unplugging and re-plugging a few times but seems to be the same.
When I got this box from my mate it already had the channels sorted, is it possible that the channel dump he has on it is out of sync ?
The receiver info on this box is : SW Version 9.10
HW Version 1770-1.0-CS100
Is that the latest firmware for the box and in your opinion what would be the best option to try have a go to sort this sound issue out, a re-flash ? Or a factory reset ?
Sorry for all the questions here guys, but as I said I'm in unknow waters as I'm used to the starview only.
It's only a mili-second out of sync but it's enough to make you switch off the tv lol
Thanks guys :)
|
Senior Member
|
14. June 2008 @ 11:40 |
Link to this message
|
Originally posted by sandisk:
Hi fellas, I'm just going back to my orininal post regarding the sync issue I seem to be having....
I just sat down now and I can still notice it on some channels more than others... it's enough to do your head in :(
I've tried unplugging and re-plugging a few times but seems to be the same.
When I got this box from my mate it already had the channels sorted, is it possible that the channel dump he has on it is out of sync ?
The receiver info on this box is : SW Version 9.10
HW Version 1770-1.0-CS100
Is that the latest firmware for the box and in your opinion what would be the best option to try have a go to sort this sound issue out, a re-flash ? Or a factory reset ?
Sorry for all the questions here guys, but as I said I'm in unknow waters as I'm used to the starview only.
It's only a mili-second out of sync but it's enough to make you switch off the tv lol
Thanks guys :)
i woiuld imagine the channel dump is out its a cable prob work goin on in the area mine does it as wel so i flip up one station then back down again and it does be fine dont really happin any more try rescan the whole lot again that should help even more
where abouts are you roughly?
|
Senior Member
|
14. June 2008 @ 11:56 |
Link to this message
|
Thanks for the reply..
I'm in the Clondalkin area of Dublin.
To me it seems that the sounds is distorted in some way but I can't put my finger on it... The only way I can put it is if you download a movie and it's slighly out of sycn, well all my stations seem to be like that.
If I do another scan will all my channels be messed up as in not in the order they are in now ?
It doesn't matter if they are mixed up as I wouldn't mind spending an hour or 2 sorting them out if it would solve this prob.
I have a starview upstairs and it's fine audio and pic wise and I've tried the replay lite without using the splitter and still the same.. the pic is fine but the audio is messed up.
|
Senior Member
|
14. June 2008 @ 12:00 |
Link to this message
|
Originally posted by sandisk:
Thanks for the reply..
I'm in the Clondalkin area of Dublin.
To me it seems that the sounds is distorted in some way but I can't put my finger on it... The only way I can put it is if you download a movie and it's slighly out of sycn, well all my stations seem to be like that.
If I do another scan will all my channels be messed up as in not in the order they are in now ?
It doesn't matter if they are mixed up as I wouldn't mind spending an hour or 2 sorting them out if it would solve this prob.
I have a starview upstairs and it's fine audio and pic wise and I've tried the replay lite without using the splitter and still the same.. the pic is fine but the audio is messed up.
thats happins me i know what your talkin about
#reset the box and scan the channels did you put the channel dump on it called brians fav??
they should come back in order depends on what way you flashed the box e.g untick the maintain user data on the stb link
|
|
MoonWB
Newbie
|
14. June 2008 @ 12:00 |
Link to this message
|
Originally posted by BRIAN1956:
Hi MoonWB,
Delighted you got the 913 on your Replay PVR.
To check that the software was transfered, go to
Menu
Utility
Receiver Information....OK
SW Version should be 9.13
If this is so put a channel data file on the box.
Use this one if you haven't backed up your own.
http://www.speedyshare.com/664331132.html
It is for Dublin area but it might kickstart your box, then you can scan for channels.
Open up the Stblink..select "RUN"
Set Up Comm
Select "Write Factory Data" a prompt box will open for you to get the downloaded file.
Double click on the file and it will transfer to your box.
When your box reads good.
Unplug the power and null modem lead.
Power back up the box, you should see some channels.
Then do a scan for your area.
Best of luck M8ty
YES!!!! GOT IT!!! Brian you are a Fu***ng Genius mate!! :)
Sorry about panicking like a girl earlier :) I was ready to go and buy a new box BUT you were right I did not relaod the factory data correctly! Plugged back in today, loaded factory data after several attempts (kept loosing connection) and Voila! My box is up & running like new! Thank you so much for all of your help!
I'm sure i'll be back for the next update but till then chow.
Moonwb
|
Senior Member
|
14. June 2008 @ 12:10 |
Link to this message
|
thats happins me i know what your talkin about
#reset the box and scan the channels did you put the channel dump on it called brians fav??
they should come back in order depends on what way you flashed the box e.g untick the maintain user data on the stb link
I only got this box last week moggser and I was working thru the week so it was only yesterday I noticed this but I didn't flash this at all, it was my mates box originally so he flashed it, but I havn't a clue what way he did it.
I think my mate done up his own channel dump, so I don't really trust it lol...
Should I put on the channel dump "Brians favs" ?
Before I ever put on a channel dump should I factory reset the replay lite box first ?
EDIT:
I just went into user insatllation and hit factory default and when it came back on all the stations are still there in the same order and then I did a channel auto scan and it said found 0
This message has been edited since posting. Last time this message was edited on 14. June 2008 @ 12:17
|
Senior Member
|
14. June 2008 @ 12:19 |
Link to this message
|
Originally posted by sandisk:
thats happins me i know what your talkin about
#reset the box and scan the channels did you put the channel dump on it called brians fav??
they should come back in order depends on what way you flashed the box e.g untick the maintain user data on the stb link
I only got this box last week moggser and I was working thru the week so it was only yesterday I noticed this but I didn't flash this at all, it was my mates box originally so he flashed it, but I havn't a clue what way he did it.
I think my mate done up his own channel dump, so I don't really trust it lol...
Should I put on the channel dump "Brians favs" ?
Before I ever put on a channel dump should I factory reset the replay lite box first ?
EDIT:
I just went into user insatllation and hit factory default and when it came back on all the stations are still there in the same order and then I did a channel auto scan and it said found 0
yeah reset the box first then see what happin
let ne know what goes on
|
Senior Member
|
14. June 2008 @ 12:21 |
Link to this message
|
Originally posted by sandisk:
thats happins me i know what your talkin about
#reset the box and scan the channels did you put the channel dump on it called brians fav??
they should come back in order depends on what way you flashed the box e.g untick the maintain user data on the stb link
I only got this box last week moggser and I was working thru the week so it was only yesterday I noticed this but I didn't flash this at all, it was my mates box originally so he flashed it, but I havn't a clue what way he did it.
I think my mate done up his own channel dump, so I don't really trust it lol...
Should I put on the channel dump "Brians favs" ?
Before I ever put on a channel dump should I factory reset the replay lite box first ?
EDIT:
I just went into user insatllation and hit factory default and when it came back on all the stations are still there in the same order and then I did a channel auto scan and it said found 0
scan it at 290 and finish at 418
|
Senior Member
|
14. June 2008 @ 12:39 |
Link to this message
|
|
Yep I just scanned that on Auto scan from 290 to 418, it took roughly 15 minutes to scan but nothing found.. is this a problem lol
Even after the factory default all the channels are in their original order... can this be right ?
|
Senior Member
|
14. June 2008 @ 12:42 |
Link to this message
|
Originally posted by sandisk:
Yep I just scanned that on Auto scan from 290 to 418, it took roughly 15 minutes to scan but nothing found.. is this a problem lol
Even after the factory default all the channels are in their original order... can this be right ?
put on rte one for a min and tell me what it says on the screen
|
Senior Member
|
14. June 2008 @ 12:57 |
Link to this message
|
It just says Rte1 0001 14:45 the saturday game live june 14 16:59 English 1/1
Stero
In auto search it says >>>>
start freq : 162
end freq: 866
symbol rate: 6952
constellation: 64 QAM
Search by network: ON
This message has been edited since posting. Last time this message was edited on 14. June 2008 @ 13:01
|
Senior Member
|
14. June 2008 @ 13:01 |
Link to this message
|
Originally posted by sandisk:
It just says Rte1 0001 14:45 the saturday game live june 14 16:59 English 1/1
Stero
i mean does anything come on like n.a scrambled or a picture even??? does you normal tv work?
|
Senior Member
|
14. June 2008 @ 13:03 |
Link to this message
|
Oh right, yes I can get all my channels as I got the box, I have all my stations... even after I do a factory default I still have all my stations... It's just that they seem to be slightly out of sync.
My normal cable is fine and as I said I have all the channels on the replay lite..all the movies, sports ect.. But it's like the factory default does nothing... all my stations are in the same place after I do the factory restet.
This message has been edited since posting. Last time this message was edited on 14. June 2008 @ 13:05
|
Senior Member
|
14. June 2008 @ 13:16 |
Link to this message
|
Originally posted by sandisk:
Oh right, yes I can get all my channels as I got the box, I have all my stations... even after I do a factory default I still have all my stations... It's just that they seem to be slightly out of sync.
My normal cable is fine and as I said I have all the channels on the replay lite..all the movies, sports ect.. But it's like the factory default does nothing... all my stations are in the same place after I do the factory restet.
sent you a pm
|
Senior Member
|
14. June 2008 @ 14:07 |
Link to this message
|
Hi, have lost E4+1, all the other channels are fine, sure I can rescan it in but there's just one thing, it's not coming up NA scrambled or just blue like the other channels do when u lose them, it's saying No video? Any ideas what that's about?
I still have it on my N*L Digibox in the other room. In North Dublin by the way.
|
Senior Member
|
14. June 2008 @ 14:53 |
Link to this message
|
Latest Channel Dump file for Dublin Area.
All Working
http://www.speedyshare.com/627874671.html
Connect the Stblink from your PC to the box.
Setup Comm.
Click Write Factory Data and get the saved file from your desktop.
There will be 64 blocks to upload.
After about 10 seconds after your PC reads "Transfer Complete"
Unplug the box and null modem lead.
Plug back in the box, WAIT for green light and then connect scart and TV lead
Make sure as always to wait for the rapidly flashing light.
The above channels have been updated at 9.05PM as there was a slight change.
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
This message has been edited since posting. Last time this message was edited on 14. June 2008 @ 15:59
|
Senior Member
|
14. June 2008 @ 15:02 |
Link to this message
|
When doing a search in Dublin.
Make sure you are NOT using a splitter when doing the scan.
Start Frequency.........290
End Frequency...........419
Symbol Rate.............6887
Constellation...........64 QAM
Search By Network........ON.
Search........15 Mins for scan to find the channels.
When all channels are found....Select....View.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If you are watching Footie or Movies....put the box on Widescreen.
Menu.
User Installation.
System Settings......OK
Screen Format.......16:9
Exit back to TV.
~~~~~~~~~~~~~~~~~~
Don't forget to adjust the Time on the Box.
Menu.
Timer.
Time Adjust.......OK
Summer Time....ON.
Exit back to TV
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
This message has been edited since posting. Last time this message was edited on 14. June 2008 @ 15:12
|
Senior Member
|
14. June 2008 @ 16:15 |
Link to this message
|
Just want to say thanks very much moggser for helpin me sort out my box.
It seems it must of been a bad flash or dump as now I've re-flashed everything it's so far so good :)
I've been watching it now for a couple of hours and it seems to be running fine so a big thanks mate.
Thanks for the tips aswell Brian... I'm just about startin to get used to the box :)
|
Senior Member
|
14. June 2008 @ 18:51 |
Link to this message
|
Cheers Sandisk,
You are welcome,
Lot's of good helpers on here and throughout AfterDawn.
Here's another tip, me and the missus went to the Movies tonight.
We saw a film called "The Happening"
Don't waste your hard earned cash going to see this.
It's quite possibly the worst film I ever seen.
Plan 9 From Outer Space was more professional.
Glad you are up and running M8ty
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
|
Senior Member
|
14. June 2008 @ 18:54 |
Link to this message
|
Originally posted by MoonWB
YES!!!! GOT IT!!! Brian you are a Fu***ng Genius mate!! :)
Sorry about panicking like a girl earlier :) I was ready to go and buy a new box BUT you were right I did not relaod the factory data correctly! Plugged back in today, loaded factory data after several attempts (kept loosing connection) and Voila! My box is up & running like new! Thank you so much for all of your help!
I'm sure i'll be back for the next update but till then chow.
Moonwb[/quote:
Great MoonWB,
You showed great patience and perseverance and it payed off.
Happy viewing M8ty
** This information is provided for educational purposes only. Misuse of the above is neither the responsibility of the author or the web host **
|
Senior Member
|
15. June 2008 @ 06:56 |
Link to this message
|
|
That's ironic Brian that you should say that, I actually saw the trailer for "The Happening" a couple of days ago I thought about takin the other half to see it maybe tonight lol but that's the third negative view I've heard of it so I reckon I'll go see something else :D
Ok so now my box seems to be running perfect apart from me missing a few of the music channels, well I'm missing most of them actually. I just get the N/A scrambled.
Any suggestions on the process on getting them missing channels back is greatly appreiciated :)
Cheers fellas
|
Moderator
|
15. June 2008 @ 07:14 |
Link to this message
|
Originally posted by dubman17:
Hi can somebody please send me the new codes for replay lite which were scrambled yesterday fri 13th.My e-mail is *removed*.This would be very much appreciated.
email removed and no codes here. Read this - http://forums.afterdawn.com/thread_view.cfm/662154
plus the main Forum Rules are in my signature.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
Advertisement
|
|
|
|
kikivee
Newbie
|
15. June 2008 @ 07:51 |
Link to this message
|
Quote:
Tip....some of the channels you may think are missing are not really missing at all, they are just labelled as Tv Ch and therefore just need to be identified and renamed in the channel manager option.
Menu
Channel Manager
TV Channel
Scroll down to TV Ch until you find missing channel
Green Edit button
Rename CH
Exit
|
