|
Dreambox 500T 500C Fixes here
|
|
Please note that the forum rules have changed. Posting of new codes is no longer allowed. See this thread for more information.
|
|
cinty
Junior Member
|
20. July 2009 @ 18:44 |
Link to this message
|
|
hi i'v been tryin to flash the dbox and when i say no to flash erase it just does it anyway any advise
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
20. July 2009 @ 18:46 |
Link to this message
|
sheao I have answered you on the end of the previous page. It got shunted ;)
Here it is again:
OK we will stick with hypercam. You have almost got it ;) Presuming you are on DK1.1 as it has the right lib files. FTP to evocam script in var/script. Copy it to your desktop now using notepad+ or metapad, (both free just google them), re-click the script and open with one of the editors that you have choose. Notepad will work but best practice to use one of these editors.
Wherever you see evocam in the script change it to say hypercam. After changes in the script rename the evocam script to hypercam using the same file type extension.
FTP to box again, delete evocam script on the box and replace it with you new edited hypercam script. Reboot box and CAM with start.
Sounds like a lot but will only take a few minutes. No questions are silly some answers are though :)
This message has been edited since posting. Last time this message was edited on 20. July 2009 @ 18:54
|
|
sheao
Newbie
|
20. July 2009 @ 18:57 |
Link to this message
|
|
thanks a lot sounds like i might be able to grasp that;
but daughters asleep on the chair better put her to bed and hit it myself,
i'll be on the case first thing in the morning, if i get this sorted we'll work on the mgcamd fix if you can put up with me ha ha,
many thanks again,
i'll report back with any progress or lack of it....;) ;)
|
AfterDawn Addict
|
20. July 2009 @ 19:05 |
Link to this message
|
|
No problem have a goodnight and hopefully you will get it going tomorrow ;)
|
|
sc1985
Newbie
|
21. July 2009 @ 04:54 |
Link to this message
|
Hi, i dont know if anyone can help me, but i have not had any problem with my dreambox until 9pm Saturday night (just before the boxing!!!) where my box just stopped working and all power was lost on the box. The power cable leading into the box no longer works, so bought a replacement adapter which does work but when plugged into my dreambox, the light goes off on the adapter, with no power going into the box.
Does this mean my box is fried or is there a way in which i can get this fixed?
Many thanks for everyones help on here - id be lsot without you guys!
|
Member
|
21. July 2009 @ 07:13 |
Link to this message
|
fair play to you sc0user but some peeps would be more willing to try doing it with the script when they know they have a working img to fall back on i know i did when i started
This message has been edited since posting. Last time this message was edited on 21. July 2009 @ 07:14
|
|
sheao
Newbie
|
21. July 2009 @ 08:22 |
Link to this message
|
right scouser heres where im at, edited the script so it looked like this.
#!/bin/sh
#emuname=Hypercam 1.06
#ecminfofile=ecm.info
export env LD_LIBRARY_PATH=/var/lib:$LD_LIBRARY_PATH
case "$1" in
start)
/var/bin/hypercam &
sleep 4
;;
stop)
killall -9 hypercam
sleep 4
;;
*)
$0 stop
exit 1
;;
esac
exit 0
ftp'd to the box with flash fxp went to var/script deleted evocam script and replaced it with this script which i had renamed to hypercam keeping the same extension, rebooted box still wouldnt start the cam automaticaly,
i have noticed that in the var_init/bin theres an evocam and in the var_init/script thers an evocam script which i cannot delete or it wont drag and drop to my desktop, is there any way i can delete these..?
|
AfterDawn Addict
|
21. July 2009 @ 09:07 |
Link to this message
|
Originally posted by hadmad:
fair play to you sc0user but some peeps would be more willing to try doing it with the script when they know they have a working img to fall back on i know i did when i started
You have to fix it first and then make a working image ;)
@sheao my apologies I thought you couldn't get hypercam across but you have. Just rename the evocam script to hypercam and reboot.
This message has been edited since posting. Last time this message was edited on 21. July 2009 @ 09:09
|
|
cinty
Junior Member
|
21. July 2009 @ 15:27 |
Link to this message
|
|
hi flashed dbox and when i done a scan i'm only gettin rte and 3e but it tells whats on the other channels anyone know what i'm doing wrong thanks
|
|
mossymor
Junior Member
|
21. July 2009 @ 17:06 |
Link to this message
|
|
Hi Cinty.. have you Tuned to Sky Sports 2 and waited a minute or two, then change to Sky sports 1.
All channels should then be available.
|
|
cinty
Junior Member
|
21. July 2009 @ 17:22 |
Link to this message
|
Originally posted by mossymor:
Hi Cinty.. have you Tuned to Sky Sports 2 and waited a minute or two, then change to Sky sports 1.
All channels should then be available.
yeah done all that but still nothing. i'm giving up thanks anyway
|
|
tmck2
Member
1 product review
|
22. July 2009 @ 06:43 |
Link to this message
|
Originally posted by NickNolte:
On occasions BBC1 + 2, UTV, CH4, Sky1 + 2 are giving me blank screens. If I go to All Services, I can then get them. Annoying but at least better that the last few months.
Yes Im getting that Nick but I find if I tune to Setanta golf or Set2(colour bars and drone for sound)switch to them channels they come in
|
|
tmck2
Member
1 product review
|
22. July 2009 @ 06:56 |
Link to this message
|
Originally posted by cinty:
Originally posted by mossymor:
Hi Cinty.. have you Tuned to Sky Sports 2 and waited a minute or two, then change to Sky sports 1.
All channels should then be available.
yeah done all that but still nothing. i'm giving up thanks anyway
Hi Cinty look in tuxbox commander see if your files H 1.06 are in there if not flash with tv disconnected and you should be ok
|
|
thecorpo
Newbie
|
27. July 2009 @ 06:32 |
Link to this message
|
hey there
have flashed the box fine, but when i ftp in, there is no bin folder inside var.
there is one in the dreambox root, and one in var_init, but nothing in /var itself.
should i flash erase?
This message has been edited since posting. Last time this message was edited on 27. July 2009 @ 06:33
|
|
thecorpo
Newbie
|
27. July 2009 @ 12:39 |
Link to this message
|
aha, using the hadmads great image I'm up and running....on one box. Flashed two dreambox;s, 1 had no problem getting signal strength of 90 or so, but the other one, using the exact same cables, is only coming back at 70% or so, and it's not scanning the transponder. This is a common problem with the dreambox? Both were working perfectly before the roll out
|
|
milltown5
Newbie
|
27. July 2009 @ 17:47 |
Link to this message
|
hadmad.......thanks a million for putting up the img file. I have finally got my Dreambox working. I had been floundering for a few days getting nowhere.
Thanks to all the other members for their comments as well, its just that I did'nt understand fully what was going on.
Normally I would agree with the idea of people having to do at least some of the figuring out for themselves. However, in this case I think it was too difficult and we can be excused this time for taking the easy way out. Its a bit like honours maths - not everybody can grasp it !.
regards and thanks to all
|
|
markmcono
Newbie
|
29. July 2009 @ 18:53 |
Link to this message
|
|
great forum, lots of info, sounds like a great box.
would appreciate if a few good folks would pm me a good site to buy this box from. (I am presuming its not available in Ireland ?!).
many thanks
|
|
MUFC8
Newbie
|
5. August 2009 @ 13:13 |
Link to this message
|
Hi everyone. Just a quick question about the fix for the dreambox 500c. Is it necessary to use the dk 1.1 image or could i just ftp the files to my dreambox using the image i am currently using which is dw 1.6. This would be a lot easier for me as i dont have a null modem cable and would have to go out and buy one to flash the image :)
|
|
JKGT
Suspended due to non-functional email address
|
6. August 2009 @ 05:58 |
Link to this message
|
Originally posted by sheao:
right scouser heres where im at, edited the script so it looked like this.
#!/bin/sh
#emuname=Hypercam 1.06
#ecminfofile=ecm.info
export env LD_LIBRARY_PATH=/var/lib:$LD_LIBRARY_PATH
case "$1" in
start)
/var/bin/hypercam &
sleep 4
;;
stop)
killall -9 hypercam
sleep 4
;;
*)
$0 stop
exit 1
;;
esac
exit 0
ftp'd to the box with flash fxp went to var/script deleted evocam script and replaced it with this script which i had renamed to hypercam keeping the same extension, rebooted box still wouldnt start the cam automaticaly,
i have noticed that in the var_init/bin theres an evocam and in the var_init/script thers an evocam script which i cannot delete or it wont drag and drop to my desktop, is there any way i can delete these..?
Im in the same boat as you mate still cant get it to autostart....Anybody any ideas?
|
|
smithcl
Newbie
|
8. August 2009 @ 12:48 |
Link to this message
|
Originally posted by hadmad:
i just sent you a ph no can you ring me
what % are you getting in the bottom right conner when you press info on a ch that is not working it should be 90% or more to get pic this is the link you need
http://rapidshare.com/files/253791665/pauls_back_up.img
and no tho flash erase
legend, cheers hadmad, was going mad, was following all the steps for everything with my dreambox but it just wasnt happening, flashed it with this image and i can now watch the rock in "The Game Plan", super! :-)
thanks again, you rock
|
|
smithcl
Newbie
|
9. August 2009 @ 08:16 |
Link to this message
|
|
ok, think i spoke too soon, box keeps crashing, very frustrating.
i did notice that when i reboot the box it says starting hypercam 1.01
whats up with that? i have the 1.06 files in there.
|
|
mossymor
Junior Member
|
9. August 2009 @ 16:11 |
Link to this message
|
Yeah my Dreambox crashs now and again as well. I think the latest fix might not be very stable but I don't know that for sure. Restarting the hypercam is normal when you reboot. Mine does that as well anyway. Hypercam replaced the evocam on the updated image.
|
|
aido_76
Newbie
|
10. August 2009 @ 19:34 |
Link to this message
|
|
hi need help have bought the null modem cable but don't know which adaptor I need is it male to male or female to male or whigh .there appears to be 4 which do I need .cheers
|
|
JKGT
Suspended due to non-functional email address
|
11. August 2009 @ 10:27 |
Link to this message
|
Originally posted by aido_76:
hi need help have bought the null modem cable but don't know which adaptor I need is it male to male or female to male or whigh .there appears to be 4 which do I need .cheers
Null modem cable should have 2 male connections, 1 at each end.... Are you sure you got the right cable?
|
|
Advertisement
|
|
|
|
tmck2
Member
1 product review
|
12. August 2009 @ 09:25 |
Link to this message
|
Originally posted by sc0user:
No problem have a goodnight and hopefully you will get it going tomorrow ;)
hello there scouser Im having problem lining up the channels as I want them on the dream box Is there a certain method of doing this as they dont seem to(go up)for me also if I want to delete a channel and rescan whats the procedure as if you do a factory reset you lose hypercam 1.06 Thanking you in advance
|
