|
KRYPTVIEW A750
|
|
|
gaffs89
Junior Member
|
3. July 2009 @ 15:29 |
Link to this message
|
Originally posted by fogo27:
ha no way jesus im stupid, but the end of my cable doesnt have a screw in bit
Ok , now we're getting somewhere. If you look at the first post on this thread , you'll see all the info you need, There is a picture of the adapter you need. got one myself from Maplins for 3 euro.The video socket is for video out to a Tv or vcr if you have no scart.
|
|
Advertisement
|
 |
|
|
|
gaffs89
Junior Member
|
3. July 2009 @ 15:33 |
Link to this message
|
Originally posted by michaeloc:
Can I use a kyrptveiw A750 in the swords area on Ch^&us cable
dont know much about cho&us , but I think you're ok as long as it's not MMDS, but don't take my word for it.
anyone on Cho7us cable with a krypt in Dublin?
|
|
fogo27
Newbie
|
3. July 2009 @ 15:38 |
Link to this message
|
|
tnx gaffs nobody else new wat i was talking about ha
|
|
Rocky1076
Newbie
|
3. July 2009 @ 15:45 |
Link to this message
|
Originally posted by e45:
Originally posted by nobby3ie:
Hi,
Havin trouble scanning channels with the krytview. Flashed with latest firmware, restored factory settings but every scan fails and brings me back to the easy installation page.
Am i doing anything wrong or is there another thing i'm missing out on. I had the box and knew how to re-scan, but not really familiar with the kryptview. thanks for any assistance.
When on auto scan, only put your provider in and the box under that should have network, then press the green button on remote, after this you will get to choose an area, you choose legacy channels, and press ok thats it sorted after that
Hi I have the exact same problem as above.... new firware loaded, no channels scanning... only 7/7 TP's. I have just done bove and when I press green button a network scan sreen coes up with " Add TP List " adding new TP, then it does auto search itself and again no channels come in off 7/7 TP's. I am in North Dublin... any ideas please????? My head is fryed now!!!!
|
|
gaffs89
Junior Member
|
3. July 2009 @ 15:46 |
Link to this message
|
Originally posted by fogo27:
tnx gaffs nobody else new wat i was talking about ha
No worries. If you're getting it in Maplins. The one I got was a maplin own brand. its's called ' coax Socket to F plug adapter ' be careful there's 2, male and female you need part # QP41U.
When you get connected the Auto scan should work fine.
Oh and you can put away the ladder!
|
|
gaffs89
Junior Member
|
3. July 2009 @ 15:49 |
Link to this message
|
Originally posted by Rocky1076:
Originally posted by e45:
Originally posted by nobby3ie:
Hi,
Havin trouble scanning channels with the krytview. Flashed with latest firmware, restored factory settings but every scan fails and brings me back to the easy installation page.
Am i doing anything wrong or is there another thing i'm missing out on. I had the box and knew how to re-scan, but not really familiar with the kryptview. thanks for any assistance.
When on auto scan, only put your provider in and the box under that should have network, then press the green button on remote, after this you will get to choose an area, you choose legacy channels, and press ok thats it sorted after that
Hi I have the exact same problem as above.... new firware loaded, no channels scanning... only 7/7 TP's. I have just done bove and when I press green button a network scan sreen coes up with " Add TP List " adding new TP, then it does auto search itself and again no channels come in off 7/7 TP's. I am in North Dublin... any ideas please????? My head is fryed now!!!!
Cable or MMDS and are you conected to the RF in socket on the Kryptview?
|
AfterDawn Addict
3 product reviews
|
3. July 2009 @ 15:55 |
Link to this message
|
Originally posted by Rocky1076:
Hi I have the exact same problem as above.... new firware loaded, no channels scanning... only 7/7 TP's. I have just done bove and when I press green button a network scan sreen coes up with " Add TP List " adding new TP, then it does auto search itself and again no channels come in off 7/7 TP's. I am in North Dublin... any ideas please????? My head is fryed now!!!!
Go to the post below that will show you what to do re scanning for channels
http://forums.afterdawn.com/t.cfm/f-59/s...default-782695/
|
|
Rocky1076
Newbie
|
3. July 2009 @ 16:00 |
Link to this message
|
Originally posted by gaffs89:
Originally posted by Rocky1076:
Originally posted by e45:
Originally posted by nobby3ie:
Hi,
Havin trouble scanning channels with the krytview. Flashed with latest firmware, restored factory settings but every scan fails and brings me back to the easy installation page.
Am i doing anything wrong or is there another thing i'm missing out on. I had the box and knew how to re-scan, but not really familiar with the kryptview. thanks for any assistance.
When on auto scan, only put your provider in and the box under that should have network, then press the green button on remote, after this you will get to choose an area, you choose legacy channels, and press ok thats it sorted after that
Hi I have the exact same problem as above.... new firware loaded, no channels scanning... only 7/7 TP's. I have just done bove and when I press green button a network scan sreen coes up with " Add TP List " adding new TP, then it does auto search itself and again no channels come in off 7/7 TP's. I am in North Dublin... any ideas please????? My head is fryed now!!!!
Cable or MMDS and are you conected to the RF in socket on the Kryptview?
MMDS, yes connected with RF in with connector provided with box when I bought it.
|
|
pjmorie
Member
|
3. July 2009 @ 16:01 |
Link to this message
|
|
michaeloc: Kryptview works on C*o£$s cable down in the Peoples Republic so I guess it should work.
|
AfterDawn Addict
3 product reviews
|
3. July 2009 @ 16:02 |
Link to this message
|
|
Can you please stop using the quote button, use the reply button as its far to hard to follow everything, and its simpler to replay as everyone will be able to follow the problem.
|
|
gaffs89
Junior Member
|
3. July 2009 @ 16:05 |
Link to this message
|
Originally posted by e45:
Originally posted by Rocky1076:
Hi I have the exact same problem as above.... new firware loaded, no channels scanning... only 7/7 TP's. I have just done bove and when I press green button a network scan sreen coes up with " Add TP List " adding new TP, then it does auto search itself and again no channels come in off 7/7 TP's. I am in North Dublin... any ideas please????? My head is fryed now!!!!
Go to the post below that will show you what to do re scanning for channels
http://forums.afterdawn.com/t.cfm/f-59/s...782695/
Nice one E45. Must try to do a guide for Manual scan for the MMDS users. It took me a while to set up mine. It can be tricky, but once you know the freqs its not to bad.
|
|
dubtony
Newbie
|
3. July 2009 @ 16:06 |
Link to this message
|
|
hi megs 25 and e45 thanks for your help at about 2am i was about to give up and decided to try my wifes laptop and she is on visa and gave it one last shot last night and it downloaded first try and it is up and running and it is great to have the choice back kids are loving it too again thanks for all the help
dubtony
|
|
Rocky1076
Newbie
|
3. July 2009 @ 16:06 |
Link to this message
|
Originally posted by e45:
Originally posted by Rocky1076:
Hi I have the exact same problem as above.... new firware loaded, no channels scanning... only 7/7 TP's. I have just done bove and when I press green button a network scan sreen coes up with " Add TP List " adding new TP, then it does auto search itself and again no channels come in off 7/7 TP's. I am in North Dublin... any ideas please????? My head is fryed now!!!!
Go to the post below that will show you what to do re scanning for channels
http://forums.afterdawn.com/t.cfm/f-
59/scanning_kryptview_from_default-782695/
Just done exactly what it said to do on above but after network scan adding TP's, comes up existing 1 to 7 then automatically does an auto search.... I dont get another screen with a list of areas to legacy channels from??????
|
|
fogo27
Newbie
|
3. July 2009 @ 16:09 |
Link to this message
|
|
gaff im on me roof all night i can finally get down ha ha
|
|
gaffs89
Junior Member
|
3. July 2009 @ 16:11 |
Link to this message
|
|
rocky, you need to do the manual scan. Auto will not work on MMDS.You'll have to input the frequencys. all my channels were on 9 different frequencys . you might have 7 channels on one and 15 on another and so on.
|
|
fogo27
Newbie
|
3. July 2009 @ 16:13 |
Link to this message
|
|
rocky thats the exact same problem i was having, i hadnt got the f connecter in the rf port
|
|
Rocky1076
Newbie
|
3. July 2009 @ 16:15 |
Link to this message
|
Originally posted by gaffs89:
rocky, you need to do the manual scan. Auto will not work on MMDS.You'll have to input the frequencys. all my channels were on 9 different frequencys . you might have 7 channels on one and 15 on another and so on.
Gaff have u got the frequencys please???? Only back off a weeks hol's with herself and she done me head in.... I need me box to get away from her ha ha!!!!
|
|
gaffs89
Junior Member
|
3. July 2009 @ 16:16 |
Link to this message
|
|
|
|
gaffs89
Junior Member
|
3. July 2009 @ 16:22 |
Link to this message
|
Rocky, I can give you the ones for my area, they may not be the same for you, I'm in Galway.
Here they are:
26600
28200
25000
37825
33000
34600
31400
29800
36200
(I got these from my starview)
|
|
Rocky1076
Newbie
|
3. July 2009 @ 16:29 |
Link to this message
|
Originally posted by gaffs89:
Rocky, I can give you the ones for my area, they may not be the same for you, I'm in Galway.
Here they are:
26600
28200
25000
37825
33000
34600
31400
29800
36200
Gaff just tried them all and they all come up " Failed " do I have to change anything on Channel, Symbol Rate or Modulation options??
(I got these from my starview)
|
|
gaffs89
Junior Member
|
3. July 2009 @ 16:35 |
Link to this message
|
Ok I've just coppied these instruction from The first post in this thread:
TO MANUALLY INPUT FREQ FOR MMDS ONLY AS IT DONT SCAN THAT
network >>>> you put your provider in here ie NTL
channel you can start at 1
frequency >>>>>>>> your first number (ie) 362.000
symbol rate >>>>>> if not on 6887 change it to that
modulation >>>>>> 64 QAM it should be on that
channel search type always at >>>>> network
then press the YELLOW BUTTON ONLY
you will need to do this for each freq number you have to get it right
to get the frequencys for your area try this, connect up your NtHell box and go on to a channel and press info.
|
|
gaffs89
Junior Member
|
3. July 2009 @ 16:49 |
Link to this message
|
|
Rocky , I found these frequencys some may work , they are from an old thread.
25800
27400
29000
30600
32200
33800
35400
37000
38600
23400
|
|
Rocky1076
Newbie
|
3. July 2009 @ 17:07 |
Link to this message
|
Originally posted by gaffs89:
Rocky , I found these frequencys some may work , they are from an old thread.
25800
27400
29000
30600
32200
33800
35400
37000
38600
23400
Gaff ur the man, brilliant thanks for all ur help!!!
Guys extra brownie point for the Gaff Man from Galway!!!
|
|
gaffs89
Junior Member
|
3. July 2009 @ 17:12 |
Link to this message
|
|
No worries. Did you get all your channels?
|
|
Advertisement
|
|
|
|
Rocky1076
Newbie
|
3. July 2009 @ 17:15 |
Link to this message
|
Originally posted by gaffs89:
No worries. Did you get all your channels?
I have 109 so far still scanning my man
|
