|
Jungle Flasher Tutorial for STOCK 83850C Lite-ON (pictures included)
|
|
AfterDawn Addict
2 product reviews
|
29. September 2009 @ 14:23 |
Link to this message
|
Originally posted by stub1982:
It shows in jungleflasher when i boot up withe the drive on, If i turn off the drive and leave and go back in the drive wont show up. So is it ok to do it without leaving jungleflasher?
Start up the drive and then start up Jungle Flasher. Go to the DVDkey tab and make sure your Lite-ON is detected. Click LO83 info and it will ask you to put the tray in half status. So eject the drive, unplug the DVD drive's power cable, push the tray half way in, and plug the DVD drive's power cable back in. Click OK on the screen and you will see some dots come across. The next pop up will say to fully eject the tray. So hit the eject button and it will shut the tray. Hit the eject button 1 more time and the tray will be ejected fully. Click OK on the box. Some more dots will go across. It will have you repeat that process 1 more time (half tray then fully eject). Once you have done those steps, it will ask you to save the Inquiry, Identify, and Dummy bin.
|
|
Advertisement
|
 |
|
|
|
stub1982
Newbie
|
29. September 2009 @ 14:41 |
Link to this message
|
|
Ok, will try this now.
|
|
stub1982
Newbie
|
29. September 2009 @ 15:13 |
Link to this message
|
Originally posted by leerage:
Originally posted by stub1982:
It shows in jungleflasher when i boot up withe the drive on, If i turn off the drive and leave and go back in the drive wont show up. So is it ok to do it without leaving jungleflasher?
Start up the drive and then start up Jungle Flasher. Go to the DVDkey tab and make sure your Lite-ON is detected. Click LO83 info and it will ask you to put the tray in half status. So eject the drive, unplug the DVD drive's power cable, push the tray half way in, and plug the DVD drive's power cable back in. Click OK on the screen and you will see some dots come across. The next pop up will say to fully eject the tray. So hit the eject button and it will shut the tray. Hit the eject button 1 more time and the tray will be ejected fully. Click OK on the box. Some more dots will go across. It will have you repeat that process 1 more time (half tray then fully eject). Once you have done those steps, it will ask you to save the Inquiry, Identify, and Dummy bin.
This is the message I get when I try this.
JungleFlasher 0.1.66 Beta
Session Started Tue Sep 29 20:10:29 2009
This is a 32 bit process running on 2 x 32 bit CPUs
PortIO is installed and running.
Found 6 I/O Ports.
Found 1 Com Ports.
Found 6 windows drives C: F: G: H: I: J:
Found 0 CD/DVD drives
Sending LO83info request to I/O port 0xC480
............
.
0000: 00 00 00 00 00 00 00 00 - 49 6E 20 44 65 64 69 63 ........In Dedic
0010: 61 74 69 6F 6E 20 54 6F - 20 54 68 65 20 42 69 72 ation To The Bir
0020: 74 68 20 4F 66 20 4D 61 - 63 6B 61 79 20 4F 6E 20 th Of Mackay On
0030: 46 65 62 72 75 61 72 79 - 20 54 77 65 6C 76 65 20 February Twelve
0040: 32 30 30 37 20 FF FF FF - FF FF FF FF FF FF FF FF 2007 ...........
0050: FF FF FF FF FF FF FF FF - FF FF FF FF FF FF FF FF ................
0060: FF FF FF FF FF FF FF FF - 48 55 18 A6 2E 6A 10 4F ........HU...j.O
LO83info extraction Failed!
Need Help!!!
|
AfterDawn Addict
2 product reviews
|
29. September 2009 @ 16:07 |
Link to this message
|
Are you using your motherboard SATA or a VIA SATA card?
|
|
stub1982
Newbie
|
29. September 2009 @ 16:12 |
Link to this message
|
Everytime I disconnect the power to the drive to do the halfway, it becomes undetectable on the ports. What am I doing wrong? I am doing it through the xbox power. Not with the connection unit. Everytime I try this i get an error. I have tried booting it up with the drive in halfway, that doesnt work either. I would show a pic, but dont know how to.
|
|
stub1982
Newbie
|
29. September 2009 @ 16:17 |
Link to this message
|
Originally posted by leerage:
Are you using your motherboard SATA or a VIA SATA card?
Motherboard, my VIA sata isnt detecting.
I got a card on my laptop, do you think that would work?
|
|
stub1982
Newbie
|
29. September 2009 @ 16:27 |
Link to this message
|
|
It did work until the erase part. Think I killed the drive, it wont eject now. My laptop froze on me. Is there a way to fix this?
|
|
stub1982
Newbie
|
29. September 2009 @ 16:34 |
Link to this message
|
Never removed the drivers on my laptop, have done now. How do I recover this? I saved the files.
|
|
stub1982
Newbie
|
29. September 2009 @ 17:05 |
Link to this message
|
I dont think it will work. The light on the 360 in the middle of the ring of light is constantly flashing. The drive wont eject. What do I do now, the sata ports wont show anything for the drive now.
|
|
stub1982
Newbie
|
29. September 2009 @ 17:43 |
Link to this message
|
When I removed the via drivers my card isnt detected. I havent a clue how to fix this. Tried to erase on the sata port but werent there. When you said remove the drivers, did you mean both, if I have them or just 1 or the other?
|
|
lukeuhren
Junior Member
|
29. September 2009 @ 18:06 |
Link to this message
|
|
Tutorials like this should be made a permanent post at the top like the Rules, make it less ridiculous having tons of threads with the same kind of questions.
|
|
stub1982
Newbie
|
29. September 2009 @ 18:29 |
Link to this message
|
|
Still stuck
|
|
stub1982
Newbie
|
29. September 2009 @ 18:50 |
Link to this message
|
|
Never mind, got it by using the pc again. Working Perfectly. Thanks for helping everyone. This was a big help. Pity I have to go from laptop to pc to do, but everythings good.
|
AfterDawn Addict
2 product reviews
|
29. September 2009 @ 19:14 |
Link to this message
|
Originally posted by stub1982:
Never mind, got it by using the pc again. Working Perfectly. Thanks for helping everyone. This was a big help. Pity I have to go from laptop to pc to do, but everythings good.
Glad you got it working.
Originally posted by lukeuhren:
Tutorials like this should be made a permanent post at the top like the Rules, make it less ridiculous having tons of threads with the same kind of questions.
My tutorials are in the Ultimate Sticky at the top of the page.
|
|
bludd
Member
|
30. September 2009 @ 14:37 |
Link to this message
|
I'm getting a little nervous on getting a bad key and thinking of getting another dvd drive to spoof the information first.
Is there a certain model drive I should look into purchasing to do this with?
I see messages saying any will work or some won't work from one model to another which left me a little confused.
Also if the spoofed drive works, do people normally just use that drive then? Is there a reason to flash the original drive then?
Any help would be appreciated and of course thanks in advance for the help.
|
AfterDawn Addict
2 product reviews
|
30. September 2009 @ 14:48 |
Link to this message
|
Originally posted by bludd:
I'm getting a little nervous on getting a bad key and thinking of getting another dvd drive to spoof the information first.
Is there a certain model drive I should look into purchasing to do this with?
I see messages saying any will work or some won't work from one model to another which left me a little confused.
Also if the spoofed drive works, do people normally just use that drive then? Is there a reason to flash the original drive then?
Any help would be appreciated and of course thanks in advance for the help.
Honestly, extracting/decrypting 74850C and 83850C Lite-ON keys, I've never had any bad keys. I know a couple of people that never spoof when extracting/decrypting a key, and they have never had an issue. It is just a precaution, and if you have an extra drive to spoof to, why not? You can spoof any drive, I prefer BenQ.
This message has been edited since posting. Last time this message was edited on 30. September 2009 @ 14:50
|
|
4g63evo
Suspended due to non-functional email address
|
1. October 2009 @ 01:41 |
Link to this message
|
|
will VIA VT6421A work with this tutorial?
Bruce lee invented Vtec. Chuck Noris uses Ivtec
|
|
GTA2787
Member
|
1. October 2009 @ 01:50 |
Link to this message
|
Originally posted by 4g63evo:
will VIA VT6421A work with this tutorial?
yes it will. VIA VT6421A is compatible with all drives of xbox 360
|
|
remf2009
Newbie
|
1. October 2009 @ 06:00 |
Link to this message
|
I know this might be a bit of a noob question, but how exactly do you check which Lite-on drive you have? I have one in my xbox, but I am unsure if it is STOCK 83850C or 74850C.
Is there anywhere on the drive that states whether it is one or the other, or do I need to check in some other way? I'd like to be able to confirm before I start wiring things up...
Apologies for my ignorance!
|
|
GTA2787
Member
|
1. October 2009 @ 06:26 |
Link to this message
|
Originally posted by remf2009:
I know this might be a bit of a noob question, but how exactly do you check which Lite-on drive you have? I have one in my xbox, but I am unsure if it is STOCK 83850C or 74850C.
Is there anywhere on the drive that states whether it is one or the other, or do I need to check in some other way? I'd like to be able to confirm before I start wiring things up...
Apologies for my ignorance!
The only way you can check is to open up the xbox and check the drive model written on the drive.As far as i know, there is no other way to check.Also,Let me know when u bought ur xbox
|
|
remf2009
Newbie
|
1. October 2009 @ 06:29 |
Link to this message
|
It's a second hand refurbed off of eBay.
I opened it up last night and the date on the drive is February 2009 - which having looked about, suggests might be the older firmware which requires more work?
On a separate point, I have an old Xbox (RROD) with flashed Sammy dvd drive. Is there a tutorial somewhere detailing how to replace the Xbox with Lite-on drive with the old Sammy? Seems like an easier solution?
|
|
GTA2787
Member
|
1. October 2009 @ 06:37 |
Link to this message
|
Originally posted by remf2009:
It's a second hand refurbed off of eBay.
I opened it up last night and the date on the drive is February 2009 - which having looked about, suggests might be the older firmware which requires more work?
On a separate point, I have an old Xbox (RROD) with flashed Sammy dvd drive. Is there a tutorial somewhere detailing how to replace the Xbox with Lite-on drive with the old Sammy? Seems like an easier solution?
Since the driver date is feb 2009 most probably it has to 7 series lite-on because 8 series lite-on were released in may/june.It not that hard to put newer firmware over older one.Just follow this guide
|
|
remf2009
Newbie
|
1. October 2009 @ 06:42 |
Link to this message
|
Thanks for the link, but that is for pre-flashed Lite-on drives. Mine is not. For flashing STOCK drives it seems you need the CK3 Lite/Pro and Probe kit?
Is there a way to upgrade a STOCK 74850C drive with the new 8-firmware, and then flash it using the STOCK 83850C tutorial within this thread?
|
|
GTA2787
Member
|
1. October 2009 @ 06:53 |
Link to this message
|
Originally posted by remf2009:
Thanks for the link, but that is for pre-flashed Lite-on drives. Mine is not. For flashing STOCK drives it seems you need the CK3 Lite/Pro and Probe kit?
Is there a way to upgrade a STOCK 74850C drive with the new 8-firmware, and then flash it using the STOCK 83850C tutorial within this thread?
my bad,I thought yours was already flashed.Yes for flashing 7 series u need probe.I suggest you to open up the drive and check it out the exact model at least that way ur sure what to buy,u dont need to buy a probe if its a 8 series lite on.
As far as the second question im not aware any such thing.
|
|
Advertisement
|
|
|
|
naser075
Account closed as per user's own request
|
1. October 2009 @ 07:48 |
Link to this message
|
|
i am desperatly in need of help #######
So I have a lite-on 83850c and I have the connectivity kit of course. I can flash any drive and have flashed lite on 83850 drives before. Unfortunately with this particular one I keep on getting:
LO83info extraction Failed after it says open drive completely and i do . I have tried everything possible. I am out of solutions please help some1.
I am using conectivity kit
me
This message has been edited since posting. Last time this message was edited on 1. October 2009 @ 07:49
|
