|
|
|
The Official OC (OverClocking) Thread!
|
|
|
NO Fanboy comments needed
|
Member
|
11. January 2009 @ 14:27 |
Link to this message
|
Well 1 point for you sir. You just got me to 3.26 Now i ask you this do i continue on my quest to go higher or is there another setting i should tweak before i continue. You know i been reading alot about clocking but i think i've been reading the wrong stuff. I am new to this and ive noticed alot of the info out there is general nothing specific ie.. ( oh i just put it at 400x9 on stock voltage and hit 3.6 no problem) but they fail to mention the small tweaks it took to get there as you just showed me. Ive yet to really understand what all the settings mean in relation to what they do.
Case=Antec Lanboy, Psu=Corsair HX620, Mobo=GA-X58A-UD5,Ram=Gskill 1600Mhz 3x2gigs,Cpu=I7 950 4Ghz,Cpu Cooler= EK 240 Water Kit,Gpu=HD6870x2,Eyefinity Set up,Ssd=Gskill Phoenix Pro 120gb
|
|
Advertisement
|
|
|
|
AfterDawn Addict
4 product reviews
|
11. January 2009 @ 14:35 |
Link to this message
|
The memory was important as it configures itself to be in line with the processor, so as soon as you overclock the processor, the memory starts being overclocked too. 1066mhz memory is in actual fact 800mhz memory that passed testing for a higher speed, so it's technically already overclocked by 33%, hence why it wouldn't take much more. The FSB and the RAM multiplier are the only things that usually need adjusting initially. After a certain point you will need to increase the VCore (CPU voltage) but you shouldn't need to do that for quite some time. Keep pushing and see how far you get.
|
Member
|
11. January 2009 @ 15:02 |
Link to this message
|
|
WOOT!!!! Im at 3.6ghz@1.24v . Feeling like a kid at a candy store :)
I think im going to stay right here for a while. Now you stated something about tweaking the memory. Do tell.
Case=Antec Lanboy, Psu=Corsair HX620, Mobo=GA-X58A-UD5,Ram=Gskill 1600Mhz 3x2gigs,Cpu=I7 950 4Ghz,Cpu Cooler= EK 240 Water Kit,Gpu=HD6870x2,Eyefinity Set up,Ssd=Gskill Phoenix Pro 120gb
|
Member
|
11. January 2009 @ 15:10 |
Link to this message
|
OK i'm sorry i lied. I took up another notch couldn't help myself. 3.8 at same voltage 1.24
Case=Antec Lanboy, Psu=Corsair HX620, Mobo=GA-X58A-UD5,Ram=Gskill 1600Mhz 3x2gigs,Cpu=I7 950 4Ghz,Cpu Cooler= EK 240 Water Kit,Gpu=HD6870x2,Eyefinity Set up,Ssd=Gskill Phoenix Pro 120gb
|
Member
|
11. January 2009 @ 15:43 |
Link to this message
|
|
ok so i put it up a bit more. Im at 3.9 @1.24v. Now im runnig it through occt for 30 min. So far the temp has reached a peak of 57 but fluctuates mostly between 53-56. Is this ok. My other question is occt shows the vcore as 1.22. Easy tune shows it at 1.21. But i set it at the mobo @ 1.2435. Thats got me confused at the moment. I'm pretty sure that all those voltages are fine. But who do i trust lol.. Thanks
Case=Antec Lanboy, Psu=Corsair HX620, Mobo=GA-X58A-UD5,Ram=Gskill 1600Mhz 3x2gigs,Cpu=I7 950 4Ghz,Cpu Cooler= EK 240 Water Kit,Gpu=HD6870x2,Eyefinity Set up,Ssd=Gskill Phoenix Pro 120gb
|
AfterDawn Addict
4 product reviews
|
11. January 2009 @ 16:19 |
Link to this message
|
Originally posted by chop2113:
ok so i put it up a bit more. Im at 3.9 @1.24v. Now im runnig it through occt for 30 min. So far the temp has reached a peak of 57 but fluctuates mostly between 53-56. Is this ok. My other question is occt shows the vcore as 1.22. Easy tune shows it at 1.21. But i set it at the mobo @ 1.2435. Thats got me confused at the moment. I'm pretty sure that all those voltages are fine. But who do i trust lol.. Thanks
well let me jump in on this seeing im at the middle of it..lol
to get 3.6ghz on my E8400 and my GA-EP45-DS3R i have all my settings on auto goes t o3.6 with ease. 400x9 with the multi. and have my mem OC'd to 1066. 400C i think it is... i will check shortly and post back my exact settings. good mem is the key. i couldnt OC my crucial mem it was garbage.... the mushkin i have no is awsome way easy to OC.
|
Member
|
11. January 2009 @ 16:32 |
Link to this message
|
|
Yeah that wasnt working for me in the beginning. I couldn't get past 3.2. It wasn't till sammoris stated to change the memory multiplier that it finally worked. So now im at 3.9 @1.24v. Went through 30 minutes occt.
Case=Antec Lanboy, Psu=Corsair HX620, Mobo=GA-X58A-UD5,Ram=Gskill 1600Mhz 3x2gigs,Cpu=I7 950 4Ghz,Cpu Cooler= EK 240 Water Kit,Gpu=HD6870x2,Eyefinity Set up,Ssd=Gskill Phoenix Pro 120gb
|
AfterDawn Addict
4 product reviews
|
11. January 2009 @ 19:37 |
Link to this message
|
i have my mem set at the 400mhz stepping and the 2.66d strap putting my mushkin DDR2 800 running at 1066.
my CPU freq set at 400x9 3.6ghz all settings at auto. my Vcore is 1.23v right now.temps at idle are 32-35c 50-53c under load.(about 46c running dvd-rebuilder)
|
Member
|
11. January 2009 @ 20:37 |
Link to this message
|
|
Well i have 1066 memory but its currently at like 800 mhz since im only using the memory multiplier 2.00d. I tried changing the memory multiplier to get my memory close to 1066 but the system became unstable. So seeing what you did im guessing that im going also have to adjust my strap then use the multiplier that gets me to 1066. Then hopefully it should be stable and running at its stated speed?
Case=Antec Lanboy, Psu=Corsair HX620, Mobo=GA-X58A-UD5,Ram=Gskill 1600Mhz 3x2gigs,Cpu=I7 950 4Ghz,Cpu Cooler= EK 240 Water Kit,Gpu=HD6870x2,Eyefinity Set up,Ssd=Gskill Phoenix Pro 120gb
|
|
bigwill68
Suspended permanently
|
11. January 2009 @ 23:15 |
Link to this message
|
Originally posted by chop2113:
Well i have 1066 memory but its currently at like 800 mhz since im only using the memory multiplier 2.00d. I tried changing the memory multiplier to get my memory close to 1066 but the system became unstable. So seeing what you did im guessing that im going also have to adjust my strap then use the multiplier that gets me to 1066. Then hopefully it should be stable and running at its stated speed?
first of all is your E8400 a EO or CO stepping? if it's a EO man should'en have any problem what so even and plus your not gonna get a good oc with all 4 slots filled with memory 2x2 is the best two slots 1 & 3 dimms what's the batch # on that cpu off yours? if you can get your multi 445x9=4005.6 set your volts at 1.225v vdroop of 1.168v under stress with rated fsb of 1780.3 this depends on quality of your memory if it's good enough to handle low volts off 2.0v it may want 2.1v at 5-5-5-15 at 1:1 dram freq you may have to run it loose 5-6-6-18..I don't know what bios you have? these setting are with f4 bios out the box but the above is done also with this type of ddr2
link below..
Team Group
and..Ic you got Patriot Memory and if got this below
http://www.newegg.com/Product/Product.as...&Tpk=20-220-353
its a basic powerchips kit, if u know how power chips work u could do like 1150 if not then like 1080:)
Done out of Here!
This message has been edited since posting. Last time this message was edited on 11. January 2009 @ 23:30
|
Member
|
12. January 2009 @ 05:40 |
Link to this message
|
Originally posted by sammorris:
Sheeny: Didn't we both post about that A380 case? Do you want more detail, or is there another case you'd like us to review?
Hi Sam,
No, the A380 was all I wanted to know about really, I happend to be looking at cases on the net and the wife saw and thought she would go looking for one on her laptop aswell in the other room, next thing I know I'm getting these links to the A380 case and messages to me vial live messenger saying how nice it looks... Hmmm....I thought!, bet its actually a pile of crap, time to ask the guys on Afterdawn for the low down...and what do you know! the case is actually A PILE OF CRAP!lol.
I would be intrested in your opinion and anyone elses opinion on my present case though!. I'm not really in the market for a new case yet, my next purchases will be: Ram/Case Fans/HeatSink - A.Silver pro7. Oh and some Arctic Silver5 thermo Paste!, that should knock me back all of a zillion dollars!
Best Wishes,
Sam
Gigabyte GA-965P-S3 MotherBoard (Rev.3.3)/ Bios: Award Software International, Inc. Version:F13 , Core 2 Duo E6700 - 2.66GHz / OCd to 3.33GHz , x2 G.SKILL DDRII800 2GIG Ram Running at 5-5-5-15@400Mhz , nVidia GeForce GTX295 , Creative SoundBlaster X-FI XtremeMusic 7.1 Card , APEVIA Warlock 900W PSU , Cooler Master V8 Heatsink (CUSTOMISED) , Seagate 320GIG 7200RPM SATA-II 16M cache Internal Hard Drive , Maxtor OneTouch4 500GIG External USB Hard Drive , Asus 16x +/- Dual Layer Lightscribe DVD Burner , External LITE-ON DVD Burner , NZXT Sentry LX Fan controller & Heat Sensor , Antec Twelve Hundred Case (CUSTOMISED) , D-Link DSL-2730B Modem - Firmware v1.01 , Logitech x-530 Speaker System , Logitech G15 Keyboard , Acer 24" LCD Monitor , Windows XP Home SP3
|
AfterDawn Addict
4 product reviews
|
12. January 2009 @ 06:39 |
Link to this message
|
|
The 3D Aurora is generally a pretty good case. It doesn't have ideal side ventilation, but that's not a big issue when there's so much else going on. It's far better balanced than the A380 case, shall we say, plus the build quality is far better.
|
Member
|
12. January 2009 @ 06:50 |
Link to this message
|
Originally posted by sammorris:
The 3D Aurora is generally a pretty good case. It doesn't have ideal side ventilation, but that's not a big issue when there's so much else going on. It's far better balanced than the A380 case, shall we say, plus the build quality is far better.
In regard to side ventilation, the 3DAurora comes with an interchangable side vent, so you can go from clear perspex to grill, I'm not sure if you saw only the one with the perspex Sam. Do you think cases benifit from a fan on the side?.
Just a quick question, whats the safest CPU Temperature at load for the e6700??
Best Wishes,
Sam
Gigabyte GA-965P-S3 MotherBoard (Rev.3.3)/ Bios: Award Software International, Inc. Version:F13 , Core 2 Duo E6700 - 2.66GHz / OCd to 3.33GHz , x2 G.SKILL DDRII800 2GIG Ram Running at 5-5-5-15@400Mhz , nVidia GeForce GTX295 , Creative SoundBlaster X-FI XtremeMusic 7.1 Card , APEVIA Warlock 900W PSU , Cooler Master V8 Heatsink (CUSTOMISED) , Seagate 320GIG 7200RPM SATA-II 16M cache Internal Hard Drive , Maxtor OneTouch4 500GIG External USB Hard Drive , Asus 16x +/- Dual Layer Lightscribe DVD Burner , External LITE-ON DVD Burner , NZXT Sentry LX Fan controller & Heat Sensor , Antec Twelve Hundred Case (CUSTOMISED) , D-Link DSL-2730B Modem - Firmware v1.01 , Logitech x-530 Speaker System , Logitech G15 Keyboard , Acer 24" LCD Monitor , Windows XP Home SP3
|
AfterDawn Addict
4 product reviews
|
12. January 2009 @ 06:54 |
Link to this message
|
|
I'm aware of the side grille, but didn't think a fan could be attached to it (which is really what is important), if you can attach a 120mm side fan (intake), do so.
There isn't really a 'safest' temperature, but the CPU is safe as long as the main CPU temperature doesn't exceed about 65ºC (not the core temperatures), this is pretty easy to achieve usually. Below 50 is more typical.
|
Member
|
12. January 2009 @ 07:03 |
Link to this message
|
Well heres a look at my Temps according to Everst Ultimate Edition:
Sensor Properties
Sensor Type ITE IT8718F (ISA 290h)
GPU Sensor Type Analog Devices ADT7473 (NV-I2C 2Eh)
Motherboard Name Gigabyte 965P Series
Chassis Intrusion Detected No
Temperatures
Motherboard 51 °C (124 °F)
CPU 37 °C (99 °F)
CPU #1 / Core #1 46 °C (115 °F)
CPU #1 / Core #2 45 °C (113 °F)
GPU 59 °C (138 °F)
GPU Diode 66 °C (151 °F)
GPU Memory 58 °C (136 °F)
GPU Ambient 54 °C (129 °F)
Seagate ST3320620AS 35 °C (95 °F)
Cooling Fans
CPU 2567 RPM
Power Supply 956 RPM
GPU 1725 RPM (60%)
Voltage Values
CPU Core 1.33 V
+3.3 V 3.31 V
+12 V 11.92 V
+5 V Standby 5.16 V
DIMM 1.90 V
GPU Vcc 3.27 V
Opinions and advice much appreciated. Also those Temps were higher until I flashed my Bios to F13, after that the CPU temps dropped bigtime.
Gigabyte GA-965P-S3 MotherBoard (Rev.3.3)/ Bios: Award Software International, Inc. Version:F13 , Core 2 Duo E6700 - 2.66GHz / OCd to 3.33GHz , x2 G.SKILL DDRII800 2GIG Ram Running at 5-5-5-15@400Mhz , nVidia GeForce GTX295 , Creative SoundBlaster X-FI XtremeMusic 7.1 Card , APEVIA Warlock 900W PSU , Cooler Master V8 Heatsink (CUSTOMISED) , Seagate 320GIG 7200RPM SATA-II 16M cache Internal Hard Drive , Maxtor OneTouch4 500GIG External USB Hard Drive , Asus 16x +/- Dual Layer Lightscribe DVD Burner , External LITE-ON DVD Burner , NZXT Sentry LX Fan controller & Heat Sensor , Antec Twelve Hundred Case (CUSTOMISED) , D-Link DSL-2730B Modem - Firmware v1.01 , Logitech x-530 Speaker System , Logitech G15 Keyboard , Acer 24" LCD Monitor , Windows XP Home SP3
|
AfterDawn Addict
4 product reviews
|
12. January 2009 @ 07:07 |
Link to this message
|
|
Those temperatures look fine.
|
Member
|
12. January 2009 @ 07:22 |
Link to this message
|
|
Sam,
Just a quick question, with only one intake fan on my case would it be worth my while in getting a higher CFM Rated fan for the front to lower my Temps even more?. The only problem is I've looked around, the manual etc, some sites but cant seem to find out what my Aurora fans are CFM rated at??, if anyone knows I would be very greatful!
Thanks,
Samuel.
Gigabyte GA-965P-S3 MotherBoard (Rev.3.3)/ Bios: Award Software International, Inc. Version:F13 , Core 2 Duo E6700 - 2.66GHz / OCd to 3.33GHz , x2 G.SKILL DDRII800 2GIG Ram Running at 5-5-5-15@400Mhz , nVidia GeForce GTX295 , Creative SoundBlaster X-FI XtremeMusic 7.1 Card , APEVIA Warlock 900W PSU , Cooler Master V8 Heatsink (CUSTOMISED) , Seagate 320GIG 7200RPM SATA-II 16M cache Internal Hard Drive , Maxtor OneTouch4 500GIG External USB Hard Drive , Asus 16x +/- Dual Layer Lightscribe DVD Burner , External LITE-ON DVD Burner , NZXT Sentry LX Fan controller & Heat Sensor , Antec Twelve Hundred Case (CUSTOMISED) , D-Link DSL-2730B Modem - Firmware v1.01 , Logitech x-530 Speaker System , Logitech G15 Keyboard , Acer 24" LCD Monitor , Windows XP Home SP3
|
AfterDawn Addict
4 product reviews
|
12. January 2009 @ 07:27 |
Link to this message
|
|
1000rpm, i.e. near-silent, but low airflow. Try a Scythe S-Flex SFF21F for high speed but reasonable noise, or a Scythe Kaze White if you want an illuminated one :)
|
Member
|
12. January 2009 @ 07:47 |
Link to this message
|
Originally posted by sammorris:
1000rpm, i.e. near-silent, but low airflow. Try a Scythe S-Flex SFF21F for high speed but reasonable noise, or a Scythe Kaze White if you want an illuminated one :)
Thanks Sam, can you send me a link to the Scythe Kaze White, cant seem to find it!. Also the fans I was looking at were these:
Antec TriCool LED Fan 120mm Blue
CoolerMaster Silent Blue LED Fan 120mm
Any good?
Best Wishes,
Sam
Gigabyte GA-965P-S3 MotherBoard (Rev.3.3)/ Bios: Award Software International, Inc. Version:F13 , Core 2 Duo E6700 - 2.66GHz / OCd to 3.33GHz , x2 G.SKILL DDRII800 2GIG Ram Running at 5-5-5-15@400Mhz , nVidia GeForce GTX295 , Creative SoundBlaster X-FI XtremeMusic 7.1 Card , APEVIA Warlock 900W PSU , Cooler Master V8 Heatsink (CUSTOMISED) , Seagate 320GIG 7200RPM SATA-II 16M cache Internal Hard Drive , Maxtor OneTouch4 500GIG External USB Hard Drive , Asus 16x +/- Dual Layer Lightscribe DVD Burner , External LITE-ON DVD Burner , NZXT Sentry LX Fan controller & Heat Sensor , Antec Twelve Hundred Case (CUSTOMISED) , D-Link DSL-2730B Modem - Firmware v1.01 , Logitech x-530 Speaker System , Logitech G15 Keyboard , Acer 24" LCD Monitor , Windows XP Home SP3
|
AfterDawn Addict
4 product reviews
|
12. January 2009 @ 07:50 |
Link to this message
|
Coolermaster fans are very variable. Antec Tricools are good, as they can be switched between low noise and high speed.
As for the Kaze Whites, I think they may be a european model only.
|
Member
|
12. January 2009 @ 07:51 |
Link to this message
|
|
@Bigwill68, Well I'm not sure what the stepping is I'm guessing that's
on the chip itself but the batch number is Q832A366. Yes that is the memory i have 2x2gig sticks and i have them on slots 1 and 3. I need to say that i new to this overclocking.I brought it back down to 3.6. I figured I'll leave it there till i figure out how to get my memory up to its rated speed or better. Cincyrob had stated that his 800mhz was running at 1066 with a 400mhz strap and 2.66d multiplier. I'm Currently at a multiplier of 2.00d with no strap. like i stated before i tried to just change the multiplier to something that would get my memory at least to it stated speed but the system became unstable. So i'm guessing i'm going to have to also adjust the the strap setting. I'm Running the F6 bios on my mobo atm.
Case=Antec Lanboy, Psu=Corsair HX620, Mobo=GA-X58A-UD5,Ram=Gskill 1600Mhz 3x2gigs,Cpu=I7 950 4Ghz,Cpu Cooler= EK 240 Water Kit,Gpu=HD6870x2,Eyefinity Set up,Ssd=Gskill Phoenix Pro 120gb
|
AfterDawn Addict
4 product reviews
|
12. January 2009 @ 07:52 |
Link to this message
|
|
The strap is the letter D, which signifies 400mhz.
|
Member
|
12. January 2009 @ 07:55 |
Link to this message
|
|
oh lol ( can you smell the noob). So what do i tweak to try to get my memory running at least to its rated speed.
Case=Antec Lanboy, Psu=Corsair HX620, Mobo=GA-X58A-UD5,Ram=Gskill 1600Mhz 3x2gigs,Cpu=I7 950 4Ghz,Cpu Cooler= EK 240 Water Kit,Gpu=HD6870x2,Eyefinity Set up,Ssd=Gskill Phoenix Pro 120gb
|
Member
|
12. January 2009 @ 07:58 |
Link to this message
|
Originally posted by chop2113:
oh lol ( can you smell the noob). So what do i tweak to try to get my memory running at least to its rated speed.
Well in my Bios its the System Memory Multiplyer (SPD) set at 2.50 at the moment.
Gigabyte GA-965P-S3 MotherBoard (Rev.3.3)/ Bios: Award Software International, Inc. Version:F13 , Core 2 Duo E6700 - 2.66GHz / OCd to 3.33GHz , x2 G.SKILL DDRII800 2GIG Ram Running at 5-5-5-15@400Mhz , nVidia GeForce GTX295 , Creative SoundBlaster X-FI XtremeMusic 7.1 Card , APEVIA Warlock 900W PSU , Cooler Master V8 Heatsink (CUSTOMISED) , Seagate 320GIG 7200RPM SATA-II 16M cache Internal Hard Drive , Maxtor OneTouch4 500GIG External USB Hard Drive , Asus 16x +/- Dual Layer Lightscribe DVD Burner , External LITE-ON DVD Burner , NZXT Sentry LX Fan controller & Heat Sensor , Antec Twelve Hundred Case (CUSTOMISED) , D-Link DSL-2730B Modem - Firmware v1.01 , Logitech x-530 Speaker System , Logitech G15 Keyboard , Acer 24" LCD Monitor , Windows XP Home SP3
|
|
Advertisement
|
|
|
Member
|
12. January 2009 @ 08:01 |
Link to this message
|
ok i figured it out.i put the Frequency Latch at 400mhz and the Memory multiplier at 2.66d and now my memory is at 1066. Phew i need to get the bios tweaks names and what they do in order. But now im at 1066 what my memory is rated. Ill try to push just a little more.
Case=Antec Lanboy, Psu=Corsair HX620, Mobo=GA-X58A-UD5,Ram=Gskill 1600Mhz 3x2gigs,Cpu=I7 950 4Ghz,Cpu Cooler= EK 240 Water Kit,Gpu=HD6870x2,Eyefinity Set up,Ssd=Gskill Phoenix Pro 120gb
|
|
