|
Bangkok Dangerous
|
|
Moderator
|
6. January 2009 @ 19:58 |
Link to this message
|
Well there goes the single disc versus two disc edition theory.
I only bought the single disc and not a problem - full disc took 13 mins. using AnyDVD 6.5.0.7 and CloneDVD.
|
|
Advertisement
|
 |
|
|
|
orion6192
Junior Member
|
6. January 2009 @ 19:58 |
Link to this message
|
Originally posted by orion6192:
Originally posted by orion6192:
DVDFab 3.2.1 read the disc with no issues at all. I am pulling the entire disc now - will update in 20 minutes or so and let you know how it ends up. It read the entire disc first pass...
Errored out at 70-80% - trying Path Player now.
Fill disc failed 82.49%
Mine is the double sided single disc.
This message has been edited since posting. Last time this message was edited on 6. January 2009 @ 20:00
|
|
stopnbone
Newbie
|
6. January 2009 @ 20:03 |
Link to this message
|
this site has always been a help for me whenever i have had problems, but i never posted anything before (no real creative input to provide). however, when i tried ripping this movie unsuccessfully (like so many others), it frustrated me so much, that i said to myself, "if you find a solution, you better post it to help others like they have helped you so many times before." so anyway, here is what i did to rip bangkok dangerous (movie only): like n80r posted earlier, i used ripit4me. it went only so far though, before showing errors. however, it went far enough that, when opening up what was completed with dvd shrink, i was able to open the movie up via re-author (title 1 is what i've been reading), shrink, and burn successfully!! i hope this helps...
|
|
Burnmeout
Newbie
|
6. January 2009 @ 20:03 |
Link to this message
|
Ok here is what I did and got a full copy of Bangkok Dangerous
I used Anydvd and Dvdfab 5.2.2.2 even though it says Anydvd won't work with Dvdfab I just clicked ok also make sure you disable pathplayer After it loads I went to customize and checked everything except titles 23,24,and 25
So check 1,19,11,8,13,12,7,10,9,15,16,14,17,and 18 that's the order going down that they show up in. Then copy it as dvd9 to your HD. After it finish's coping use dvdshrink and do a full disk copy of the files from the Hard drive. You can always just get the movie alone if that is all you want. I even think you can use dvdfab again to make your copy's but didn't try that.
If you can get the files to show in Dvdfab without Anydvd then your good to go with the rest of instructions. Mine was just locking up tell I did it this way and got it to work. I did Disaster Movie Same way except you could just do a full disk in Dvdfab without customizing it. Then copy it as a dvd9 to HD, then do the dvdshrink full copy also. Hope this helps some of you.
This message has been edited since posting. Last time this message was edited on 6. January 2009 @ 20:05
|
|
mazster
Junior Member
|
6. January 2009 @ 20:12 |
Link to this message
|
Originally posted by magicmanx:
Originally posted by areamike:
Originally posted by chilenony:
put the disc in and start dvdfab it will keep triyng to read til it times out. Then hit abort and let dvdfab try to read it again then hit abort one last time and dvdfab will finally read it. Go ahead and back up the main movie only. At 99.98 % you will get a read error just hit ignore all. When it's finished load it into dvd shrink and trim the lion's gate logo off by a couple of seconds then when it's done burn it as usual. There you have it a perfect backup.
This worked for me just now. However, I did not get the error at 99.8% and I was able to backup the Main Movie only. Getting ready to burn it to blank DVD now to make sure, then test for playback.
i agree, it just worked for me without the 99% error.
Burned it.....I got audio but, No Video!
EDIT...Did it again and it worked! Thanks...
This message has been edited since posting. Last time this message was edited on 6. January 2009 @ 22:21
|
|
Basenco
Member
|
6. January 2009 @ 20:13 |
Link to this message
|
Originally posted by chilenony:
put the disc in and start dvdfab it will keep triyng to read til it times out. Then hit abort and let dvdfab try to read it again then hit abort one last time and dvdfab will finally read it. Go ahead and back up the main movie only. At 99.98 % you will get a read error just hit ignore all. When it's finished load it into dvd shrink and trim the lion's gate logo off by a couple of seconds then when it's done burn it as usual. There you have it a perfect backup.
It worked! Took about 4 times to get it running. Thanks
|
|
IronLung
Newbie
|
6. January 2009 @ 20:23 |
Link to this message
|
OK, I read through everything. I wanted AnyDVD and Nero Recode2 to work so I gave this a try and it immediately worked!
After upgrading AnyDVD to 6.5.0.7 and the endless scanning problem persisted...
Go to AnyDVD settings - Video DVD:Settings and under AI SCANNER: select DISABLED (Not recommended)
AnyDVD successfully rescanned Bangkok Dangerous in just a few seconds.
I fired up Nero Recode2 and selected Main Movie backup, it asked to include all titles, I chose NO. It found the movie title correctly and recoded it without hesitation.
BOOYAH! Don't forget to return your AnyDVD settings to AI Scanner: Automatic
|
|
areamike
Junior Member
|
6. January 2009 @ 20:25 |
Link to this message
|
Originally posted by mazster:
Originally posted by magicmanx:
Originally posted by areamike:
Originally posted by chilenony:
put the disc in and start dvdfab it will keep triyng to read til it times out. Then hit abort and let dvdfab try to read it again then hit abort one last time and dvdfab will finally read it. Go ahead and back up the main movie only. At 99.98 % you will get a read error just hit ignore all. When it's finished load it into dvd shrink and trim the lion's gate logo off by a couple of seconds then when it's done burn it as usual. There you have it a perfect backup.
This worked for me just now. However, I did not get the error at 99.8% and I was able to backup the Main Movie only. Getting ready to burn it to blank DVD now to make sure, then test for playback.
i agree, it just worked for me without the 99% error.
Burned it.....I got audio but, No Video!
UPDATE: This worked for me. I did not load through DVD Shrink afterwards. I just burnt the files using IMGBURN and viola! I am watching the backup copy on my TV now(Movie only).
This message has been edited since posting. Last time this message was edited on 6. January 2009 @ 20:25
|
|
orion6192
Junior Member
|
6. January 2009 @ 20:30 |
Link to this message
|
I just used RipIt4Me (the original one) which uses DVD Decrypter and it pulled the entire disc. I'm running it through VOBBlanker now to "clean it up" and I'll burn it and post an update.
|
|
khlockett
Suspended due to non-functional email address
|
6. January 2009 @ 20:36 |
Link to this message
|
|
RIPIT4ME or DVDFAB worked fine; you will notice the symbols <title> around the title of the movie. Shrink will not work. thank you have a nice evening.
|
|
squirtu2
Newbie
|
6. January 2009 @ 20:41 |
Link to this message
|
so i did bangkok and now disaster movie with one click dvd copy 5 and dvd43 in background got menu and movie. you can download click dvd copy 5 and get three free rips and dvd43 4.4 is free try it out i guarantee it works not a noobie even though it says
burns away
|
AfterDawn Addict
|
6. January 2009 @ 20:45 |
Link to this message
|
i wouldn't let dvd43 anywhere near my machine!
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
|
|
orion6192
Junior Member
|
6. January 2009 @ 20:47 |
Link to this message
|
Originally posted by orion6192:
I just used RipIt4Me (the original one) which uses DVD Decrypter and it pulled the entire disc. I'm running it through VOBBlanker now to "clean it up" and I'll burn it and post an update.
Worked and burned fine - full disc and copied clean; burned with Nero Burning Rom.
This message has been edited since posting. Last time this message was edited on 6. January 2009 @ 20:48
|
|
squirtu2
Newbie
|
6. January 2009 @ 20:47 |
Link to this message
|
Originally posted by ZoSoIV:
i wouldn't let dvd43 anywhere near my machine!
why not
burns away
|
AfterDawn Addict
|
6. January 2009 @ 20:51 |
Link to this message
|
Originally posted by IronLung:
OK, I read through everything. I wanted AnyDVD and Nero Recode2 to work so I gave this a try and it immediately worked!
After upgrading AnyDVD to 6.5.0.7 and the endless scanning problem persisted...
Go to AnyDVD settings - Video DVD:Settings and under AI SCANNER: select DISABLED (Not recommended)
AnyDVD successfully rescanned Bangkok Dangerous in just a few seconds.
I fired up Nero Recode2 and selected Main Movie backup, it asked to include all titles, I chose NO. It found the movie title correctly and recoded it without hesitation.
BOOYAH! Don't forget to return your AnyDVD settings to AI Scanner: Automatic
Congrats to you. AnyDVD had no problem after A1 scanner was disabled.Nero Recode opened movie only at 94% and I'm fixing to run it. I'll post back.
Edit: Got good copy and burn at 97% compression after getting rid of 2 channel and keeping 6. Recode nary a hiccup.
This message has been edited since posting. Last time this message was edited on 6. January 2009 @ 21:11
|
|
wowitsbob
Newbie
|
6. January 2009 @ 20:54 |
Link to this message
|
Originally posted by magicmanx:
Originally posted by areamike:
Originally posted by chilenony:
put the disc in and start dvdfab it will keep triyng to read til it times out. Then hit abort and let dvdfab try to read it again then hit abort one last time and dvdfab will finally read it. Go ahead and back up the main movie only. At 99.98 % you will get a read error just hit ignore all. When it's finished load it into dvd shrink and trim the lion's gate logo off by a couple of seconds then when it's done burn it as usual. There you have it a perfect backup.
This worked for me just now. However, I did not get the error at 99.8% and I was able to backup the Main Movie only. Getting ready to burn it to blank DVD now to make sure, then test for playback.
i agree, it just worked for me without the 99% error.
|
Moderator
|
6. January 2009 @ 21:03 |
Link to this message
|
|
I see you got a little of a challenge there garmoon :)
|
AfterDawn Addict
|
6. January 2009 @ 21:12 |
Link to this message
|
Miss Binkie it's over-got it after IronLung led the way. Disable A1 scanner in AnyDVD Video settings, and everything works like it's supposed to.
This message has been edited since posting. Last time this message was edited on 6. January 2009 @ 21:13
|
|
DADDYFU
Newbie
|
6. January 2009 @ 21:21 |
Link to this message
|
ash4l IS CORRECT in his summarization of the problem with the movie.
I got ANYDVD 6.5.0.8 and it read the disc just fine...
However, when CLONEDVD2 attempted to scan the disc it got stuck @ 44 OR 45%. iF you try to skip the scanning you get an error when the app scans before ripping.
Once again ASH41 gave us ALL the solution...he said (I guess ASH41 is a guy):Posted December 27, 2008.
"I found a solution to Bangkok Dangerous if you have the latest AnyDVD and CloneDVD2 to make a full back up,you might be able to use this method with other programs but I'm not sure. In CloneDVD2 I had to deselect titles 20,23,24 and 25. Title 1 is the movie. So you all could try that."
...when you remove titles 20,23,24 and 25 your "read" percentage doesn't increase it stays at approx. 74-75%...but still in the green.
ASH41 ALL of the RIP community thanks you for your brilliant deduction of this pardox attempted by LION'S GATE.
PS: If you put the DVD in your player...
1)It loads EXTREMELY SLOWLY
2)You cannot jump to the main menu from the intro
3)The bogus title sets greatly affect the DVDs play-ability.
Just wanted to add my $.02
Daddy Fu91862
|
|
chilenony
Newbie
|
6. January 2009 @ 21:52 |
Link to this message
|
BURNMEOUT... I did exactly what you did and it worked!! Copied the whole DVD! woohoo!! Run dvdFab.. Let it scan.. Hit ABORT 2 or 3 times.. Then go to Customize and check everything except 23 24 25. Select DVD9. Save it to your HD. Press Start.. during the copying process, the error will pop up. Hit IGNORE. This will happen like 4 times. after that, it's smooth sailin... Run DVD Shrink and thats it! You have the full copy! DVDShrink will take a while but in 20 mins you'll be done!!
This message has been edited since posting. Last time this message was edited on 6. January 2009 @ 21:55
|
|
nuklhed
Newbie
|
6. January 2009 @ 21:59 |
Link to this message
|
Ironlung has it on the button just open anydvd and under settings and choose to deselect (not recommended) al setting. With anydvd and clone I am burning right now! Thanks!!!
|
Moderator
|
6. January 2009 @ 23:17 |
Link to this message
|
Well garmoon at least there was a little challenge for you.
This is a weird one - either very easy for some w/ AnyDVD - business as usual or changing settings (well that's what they are there for :))
or doing different combos w/ DVDFab and hitting ignore or for some just not even scanning at all.
|
|
mililani
Newbie
|
6. January 2009 @ 23:32 |
Link to this message
|
To back up Bangkok Dangerous is really simple. Forget all the slysoft,DVD Fab, Clone DVD or even Rip4Me. You get the complete menu and all the extra. Whats the answer?.....Just use Roxio and copy the disc. Sound silly but It work for me. Did not try Nero ,but probably will work. I hope it will work with all you folks out there.Aloha.....Calvin
ps...when all else fails try the easy way
|
AfterDawn Addict
3 product reviews
|
6. January 2009 @ 23:47 |
Link to this message
|
|
Have not picked this one up yet, but if it's a challenge...i'll have to.
|
|
Advertisement
|
|
|
AfterDawn Addict
|
7. January 2009 @ 00:24 |
Link to this message
|
|
mililani, there is no way roxio will work alone, roxio doesn't remove copy protection
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
|
