|
Post your DISC quality scans here 2
|
|
AfterDawn Addict
|
15. January 2010 @ 02:30 |
Link to this message
|
Can anyone tell me how to set the default DVD Player Software in Vista. I swear the idiots that designed the control interface were total morons. There doesn't seem to be a Tools/Folder Options/File Types in "My computer" in Vista. Oh right! They have a better, more convoluted way to do it! LOL!!
I want to use Power DVD 7 on it, and I have the patch that is supposed to allow it to work in Vista, but Cyberlink didn't give any instructions for the patch's use. I've already blown up one Vista installation by installing Power DVD 7 and trying to use it, and I don't want to do it again. Last time it cost me over 45 bucks for a recovery disk, and I don't want to go through that again!
Thanks in advance,
Russ
GigaByte 990FXA-UD5 - AMD FX-8320 @4.0GHz @1.312v - Corsair H-60 liquid CPU Cooler - 4x4 GB GSkill RipJaws DDR3/1866 Cas8, 8-9-9-24 - Corsair 400-R Case - OCZ FATAL1TY 550 watt Modular PSU - Intel 330 120GB SATA III SSD - WD Black 500GB SATA III - WD black 1 TB Sata III - WD Black 500GB SATA II - 2 Asus DRW-24B1ST DVD-Burner - Sony 420W 5.1 PL-II Suround Sound - GigaByte GTX550/1GB 970 Mhz Video - Asus VE247H 23.6" HDMI 1080p Monitor
 |
|
Advertisement
|
|
|
|
AfterDawn Addict
7 product reviews
|
15. January 2010 @ 02:49 |
Link to this message
|
Russ, type in autoplay and hit enter in the search bar located in the start menu. Tell it what program you want to "autoplay" when a dvd is inserted. I tell it to do nothing myself...depends on my mood, and what i'm doing at the time.
To delete, or not to delete. THAT is the question! |
AfterDawn Addict
7 product reviews
|
15. January 2010 @ 16:07 |
Link to this message
|
Hope you got that working ok russ :)
GM, do you know how I can get the LH-20A1S to burn a 4X Verb +R DL, at more than 4X? I wanna burn them at 6, not 4. Or perhaps even 8. Verbatims are usually good enough to do this. I've done it before on an NEC ND-3550A. I've encountered a backup that REALLY doesn't wanna be compressed LOL!
Ah hah! Sorry GM. I found them in the following link. Sorry if this is against forum rules...
Lite-on F/w's for overspeed.
To delete, or not to delete. THAT is the question! This message has been edited since posting. Last time this message was edited on 15. January 2010 @ 16:14
|
AfterDawn Addict
|
15. January 2010 @ 16:35 |
Link to this message
|
Originally posted by omegaman7:
Hope you got that working ok russ :)
GM, do you know how I can get the LH-20A1S to burn a 4X Verb +R DL, at more than 4X? I wanna burn them at 6, not 4. Or perhaps even 8. Verbatims are usually good enough to do this. I've done it before on an NEC ND-3550A. I've encountered a backup that REALLY doesn't wanna be compressed LOL!
Ah hah! Sorry GM. I found them in the following link. Sorry if this is against forum rules...
Lite-on F/w's for overspeed.
Just chatted with RUss.. said he burned his first one.. expect a colorful post soon. ROFL. ;)
You didn't break any rules that I know of... CDF is welcome around here I believe and that's the only way to get CK's f/w... the exact page I was gonna send ye to. ;) Have a good one and have some fun. :)
Off to Gander Mountain. :)
|
Moderator
|
15. January 2010 @ 16:46 |
Link to this message
|
|
No problem with the links, we only complain about external links if someone's doing it to either pimp their own site or scam us for advertising
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
AfterDawn Addict
7 product reviews
|
15. January 2010 @ 16:49 |
Link to this message
|
Ahhh, very good. Cd freaks are friends then :D I should have guessed LOL!
Looks like the firmware I downloaded had zero effect on allowing my drive to burn faster. Which is strange too. I'm 99% certain, that I flashed the appropriate firmware...
To delete, or not to delete. THAT is the question! |
AfterDawn Addict
7 product reviews
|
15. January 2010 @ 17:29 |
Link to this message
|
Here's a partial scan of the disc. It froze up at the layer break...The iHAP usually breaks this threshold, but it's errors are usually higher too :p
To delete, or not to delete. THAT is the question! |
AfterDawn Addict
|
15. January 2010 @ 19:40 |
Link to this message
|
Originally posted by omegaman7:
Here's a partial scan of the disc. It froze up at the layer break...The iHAP usually breaks this threshold, but it's errors are usually higher too :p
Oman7 ... the LH-20A1X drives will NOT break the layer reading IIRC. ;) NOW your iHAS/iHAP drive should do it with NO issues if you use the "special" NERO CD/DVD Speed from CK. ;)
btw that scan looked pretty nice. :)
DID the drive make it to 6x or 8x?? I thought it should. :)
|
AfterDawn Addict
7 product reviews
|
16. January 2010 @ 00:28 |
Link to this message
|
No. The drive only hit 4X. I'll check it out tomorrow. Going over to my brothers. I have the special Cd speed ;)
To delete, or not to delete. THAT is the question! |
Senior Member
|
16. January 2010 @ 01:26 |
Link to this message
|
Originally posted by omegaman7:
GM, do you know how I can get the LH-20A1S to burn a 4X Verb +R DL, at more than 4X? I wanna burn them at 6, not 4. Or perhaps even 8. Verbatims are usually good enough to do this. I've done it before on an NEC ND-3550A. I've encountered a backup that REALLY doesn't wanna be compressed LOL!
OK, I've had enough beverages with Swedish Vodka tonight to take a shot at answering this question. (Ya, sure, you betcha!)
If the mid is mkm 001 you might be able to get a 8x burn with the LH-20A1S drive but don't hold your breath. You will have to work up to that speed in order to get a decent burn. Getting consistant decent burns at that speed is another question entirely.
If the mid is mkm 003 good luck with them. You will probably NOT get a consistantly decent burn(or even consistantly average burn), especially the one with mids MIT and MII. My experience with those is that they are made with the IS(Inverse Stack)method and the burner's firmware doesn't address the IS discs. To my best knowledge the LH-20A1 drives(any of them) were not optimized for the IS production method for the DLs.
The following Falcon discs are also IS production(but burned with Optiarc 7200S drives):
8x Falcons DL burned @ 8x(both):
This message has been edited since posting. Last time this message was edited on 16. January 2010 @ 01:27
|
AfterDawn Addict
|
16. January 2010 @ 01:29 |
Link to this message
|
Oman... I just checked my LH-20A1S (9L09) with some MKM 001 DVD+R DL discs and it seems the fastest speed they will record is 4X. They are MIS 2.4X discs so they are Over-speeding at 4X.
What is the MID on your discs??
|
AfterDawn Addict
|
16. January 2010 @ 01:33 |
Link to this message
|
Originally posted by hobbit112:
Originally posted by omegaman7:
GM, do you know how I can get the LH-20A1S to burn a 4X Verb +R DL, at more than 4X? I wanna burn them at 6, not 4. Or perhaps even 8. Verbatims are usually good enough to do this. I've done it before on an NEC ND-3550A. I've encountered a backup that REALLY doesn't wanna be compressed LOL!
OK, I've had enough beverages with Swedish Vodka tonight to take a shot at answering this question. (Ya, sure, you betcha!)
If the mid is mkm 001 you might be able to get a 8x burn with the LH-20A1S drive but don't hold your breath. You will have to work up to that speed in order to get a decent burn. Getting consistant decent burns at that speed is another question entirely.
If the mid is mkm 003 good luck with them. You will probably NOT get a consistantly decent burn(or even consistantly average burn), especially the one with mids MIT and MII. My experience with those is that they are made with the IS(Inverse Stack)method and the burner's firmware doesn't address the IS discs. To my best knowledge the LH-20A1 drives(any of them) were not optimized for the IS production method for the DLs.
The following Falcon discs are also IS production(but burned with Optiarc 7200S drives):
8x Falcons DL burned @ 8x(both):
Seemed like a pretty good answer to me. :) Maybe the Vodka content is about right. :)
|
AfterDawn Addict
|
16. January 2010 @ 04:26 |
Link to this message
|
This is the first burn with the new AD-7240s with a Ritec +R 16x F16 burned at 12x
This is the second burn, same drive at 12x with a -R 16x Verb
I know nothing about how these type of drives score, so I really don't know what to make of these scans. One things for sure, I won't be buying anymore Ritec +R 16x F-16s, that's for sure!
Russ
GigaByte 990FXA-UD5 - AMD FX-8320 @4.0GHz @1.312v - Corsair H-60 liquid CPU Cooler - 4x4 GB GSkill RipJaws DDR3/1866 Cas8, 8-9-9-24 - Corsair 400-R Case - OCZ FATAL1TY 550 watt Modular PSU - Intel 330 120GB SATA III SSD - WD Black 500GB SATA III - WD black 1 TB Sata III - WD Black 500GB SATA II - 2 Asus DRW-24B1ST DVD-Burner - Sony 420W 5.1 PL-II Suround Sound - GigaByte GTX550/1GB 970 Mhz Video - Asus VE247H 23.6" HDMI 1080p Monitor
|
AfterDawn Addict
|
16. January 2010 @ 12:10 |
Link to this message
|
Originally posted by theonejrs:
I know nothing about how these type of drives score, so I really don't know what to make of these scans. One things for sure, I won't be buying anymore Ritec +R 16x F-16s, that's for sure!
Russ
Someone said that once before. :p For some reason that's the same thing I get Russ.... inconsistency. ;( I only have a few left and they are strictly give-a-ways. :D
btw the AD drives (NEC/Optiarc/Sony) "scan" on the same structure as the BENQ's IIRC. :O NOT a bad scanning method but it still shows the "crappiness" of the Ritek discs. LOL
|
AfterDawn Addict
|
16. January 2010 @ 13:12 |
Link to this message
|
Yeah the Ritek F16-strictly giveaways. LOL They all play fine also. So wtf! Office Depots where i live are now CMC Mags and not F16s.
@Russ
the 1.03bt fw will booktype for your 7240S. Downloaded from here yesterday and installed-note Norton IS called the site unsafe but I had no problem.
http://liggydee.cdfreaks.com/page/en/Optiarc-AD-7240S/
|
AfterDawn Addict
7 product reviews
|
16. January 2010 @ 13:43 |
Link to this message
|
GM. These are the discs. You're correct. 4X would be considered overspeeding. But on my package(Much like this picture) it says 6X capable. So there must be a drive out there capable of it. I bet the NEC ND-3550A was capable. That sucker burned verbs really good :)
To delete, or not to delete. THAT is the question! This message has been edited since posting. Last time this message was edited on 16. January 2010 @ 13:44
|
AfterDawn Addict
|
16. January 2010 @ 18:01 |
Link to this message
|
Originally posted by garmoon:
Yeah the Ritek F16-strictly giveaways. LOL They all play fine also. So wtf! Office Depots where i live are now CMC Mags and not F16s.
@Russ
the 1.03bt fw will booktype for your 7240S. Downloaded from here yesterday and installed-note Norton IS called the site unsafe but I had no problem.
http://liggydee.cdfreaks.com/page/en/Optiarc-AD-7240S/
garmoon,
Which one do I download? The RCP1 or the Auto. The first one on the left is the original Optiarc FW 1.03.
Best Regards,
Russ
GigaByte 990FXA-UD5 - AMD FX-8320 @4.0GHz @1.312v - Corsair H-60 liquid CPU Cooler - 4x4 GB GSkill RipJaws DDR3/1866 Cas8, 8-9-9-24 - Corsair 400-R Case - OCZ FATAL1TY 550 watt Modular PSU - Intel 330 120GB SATA III SSD - WD Black 500GB SATA III - WD black 1 TB Sata III - WD Black 500GB SATA II - 2 Asus DRW-24B1ST DVD-Burner - Sony 420W 5.1 PL-II Suround Sound - GigaByte GTX550/1GB 970 Mhz Video - Asus VE247H 23.6" HDMI 1080p Monitor
|
AfterDawn Addict
|
16. January 2010 @ 22:53 |
Link to this message
|
Russ
go here: http://liggydee.cdfreaks.com/page/en/Optiarc-AD-7240S/
scroll down to: liggy's AD-7240SBitsetting firmware1.03
click on the the second blue option rpc1 and a window opens that at the bottom says start downloading "103bt rpc1.zip. click on that and save option in a folder you unzip to- you name choice.
Then go back to original page and look left side bottom for "links" and click on binflash- atool to flash with and download it (win32 gui v1.49b) and put it in the same folder that you just created-
Q: How do I flash my NEC drive?
A: Official NEC firmwares are supplied with their own flash utility. In this case having downloaded your firmware, all that is required is to run the application and follow a few prompts.
In the case of a modified firmware you will need a flash application. The current favourite one on CD Freaks is Binflash by Liggy and TDB's Windows and DOS based flashers here.
In the case of Binflash, make sure you select the correct drive to flash, then click on the flash button, you will now have to select the firmware .BIN file or .EXE file, then click on open. A dialog will appear with some info, click on YES if you wish to continue the flash. Allow the flash to complete then restart your PC.
In the case of TDB's DOS based flasher, you will require a DOS boot CD or Floppy, which should also contain the TDB DOS flasher and firmware BIN file. Drives housed in external firewire or USB enclosures usually cannot be flashed from DOS. If all else fails you might be able to remove the drive from its enclosure, connect it to an IDE channel on a desktop PC and flash it. This may void your guarantee however. For more info you can check out this thread.
follow the binflash above
|
AfterDawn Addict
7 product reviews
|
16. January 2010 @ 23:33 |
Link to this message
|
Here's the iHAP422 scan of that dual layer disc. Not too bad for a dying drive, and at 8X. The jitter was the quickest jitter test i've seen in a long time! XP never had slow jitter tests. I noticed when I went to windows 7 that the jitter tests were considerably slower. I don't usually scan with the iHAP. I can only assume that it's either the drive, or the proper cd speed application used for the iHAP ;) Though there are other problems as well. E.G. the application won't show cpu usage on windows 7...
To delete, or not to delete. THAT is the question! |
AfterDawn Addict
|
17. January 2010 @ 01:15 |
Link to this message
|
Originally posted by garmoon:
Russ
go here: http://liggydee.cdfreaks.com/page/en/Optiarc-AD-7240S/
scroll down to: liggy's AD-7240SBitsetting firmware1.03
click on the the second blue option rpc1 and a window opens that at the bottom says start downloading "103bt rpc1.zip. click on that and save option in a folder you unzip to- you name choice.
Then go back to original page and look left side bottom for "links" and click on binflash- atool to flash with and download it (win32 gui v1.49b) and put it in the same folder that you just created-
Q: How do I flash my NEC drive?
A: Official NEC firmwares are supplied with their own flash utility. In this case having downloaded your firmware, all that is required is to run the application and follow a few prompts.
In the case of a modified firmware you will need a flash application. The current favourite one on CD Freaks is Binflash by Liggy and TDB's Windows and DOS based flashers here.
In the case of Binflash, make sure you select the correct drive to flash, then click on the flash button, you will now have to select the firmware .BIN file or .EXE file, then click on open. A dialog will appear with some info, click on YES if you wish to continue the flash. Allow the flash to complete then restart your PC.
In the case of TDB's DOS based flasher, you will require a DOS boot CD or Floppy, which should also contain the TDB DOS flasher and firmware BIN file. Drives housed in external firewire or USB enclosures usually cannot be flashed from DOS. If all else fails you might be able to remove the drive from its enclosure, connect it to an IDE channel on a desktop PC and flash it. This may void your guarantee however. For more info you can check out this thread.
follow the binflash above
garmoon,
Thank you very much!
Russ
GigaByte 990FXA-UD5 - AMD FX-8320 @4.0GHz @1.312v - Corsair H-60 liquid CPU Cooler - 4x4 GB GSkill RipJaws DDR3/1866 Cas8, 8-9-9-24 - Corsair 400-R Case - OCZ FATAL1TY 550 watt Modular PSU - Intel 330 120GB SATA III SSD - WD Black 500GB SATA III - WD black 1 TB Sata III - WD Black 500GB SATA II - 2 Asus DRW-24B1ST DVD-Burner - Sony 420W 5.1 PL-II Suround Sound - GigaByte GTX550/1GB 970 Mhz Video - Asus VE247H 23.6" HDMI 1080p Monitor
|
AfterDawn Addict
7 product reviews
|
17. January 2010 @ 14:07 |
Link to this message
|
Not sure why it chose to go with 6X. Gonna have to look at it later. Gonna go see "Avatar" now. :D
To delete, or not to delete. THAT is the question! |
AfterDawn Addict
|
17. January 2010 @ 22:46 |
Link to this message
|
Originally posted by garmoon:
[color]Yeah the Ritek F16-strictly giveaways. LOL They all play fine also. So wtf![/color] Office Depots where i live are now CMC Mags and not F16s.
@Russ
the 1.03bt fw will booktype for your 7240S. Downloaded from here yesterday and installed-note Norton IS called the site unsafe but I had no problem.
http://liggydee.cdfreaks.com/page/en/Optiarc-AD-7240S/
You have better luck with RITEK... my luck with that brand is pitiful!! Well especially the 16x media. :p
|
AfterDawn Addict
|
18. January 2010 @ 07:47 |
Link to this message
|
|
@greensman
That's all i use for my daughter and my friends. NEVER for me. The last bad ritek was Half blood prince, she claimed it was dark and I had to admit she was right. I've been using X16 times since they switched over at ODep.
This message has been edited since posting. Last time this message was edited on 18. January 2010 @ 07:48
|
AfterDawn Addict
|
18. January 2010 @ 08:01 |
Link to this message
|
|
garmoon,
The Half Blood Prince is supposed to be dark and dreary. That's the way it's depicted in the book too, because the Dementors are causing all the bad weather and the Death Eaters are causing all the disasters.
Best Regards,
Russ
GigaByte 990FXA-UD5 - AMD FX-8320 @4.0GHz @1.312v - Corsair H-60 liquid CPU Cooler - 4x4 GB GSkill RipJaws DDR3/1866 Cas8, 8-9-9-24 - Corsair 400-R Case - OCZ FATAL1TY 550 watt Modular PSU - Intel 330 120GB SATA III SSD - WD Black 500GB SATA III - WD black 1 TB Sata III - WD Black 500GB SATA II - 2 Asus DRW-24B1ST DVD-Burner - Sony 420W 5.1 PL-II Suround Sound - GigaByte GTX550/1GB 970 Mhz Video - Asus VE247H 23.6" HDMI 1080p Monitor
|
|
Advertisement
|
|
|
AfterDawn Addict
|
18. January 2010 @ 17:44 |
Link to this message
|
|
@Russ
It was noticeably darker than my DL copy and my SL copy. She insisted I use a DL for her new copy. LOL
|
