|
Post your DISC quality scans here 2
|
|
AfterDawn Addict
|
4. January 2010 @ 01:47 |
Link to this message
|
Originally posted by omegaman7:
The board may not be helping things. I noticed that the spike 4 high, showed up right after installing the iHES108, and another HDD. Basically, my southbridge is full up LOL! Other than the PCI area. I think im gonna start looking at some Asus boards. I hear good things about those too. And they haven't let me down yet :)
There are good Gigabyte, ASUS, DFI, MSI, and Intel boards out there Oman7.. just do some research and don't look in the building thread here... they only LUST after Gigabyte and you may not get a good recommendation for something else. LOL. ;)
GOOD LUCK MATE!!!
|
|
Advertisement
|
|
|
|
AfterDawn Addict
4 product reviews
|
4. January 2010 @ 13:31 |
Link to this message
|
hope all had a good holiday. mine was most excellent. enjpyed my time with the family and relatives.
as for my 20A4P. im gonna lay her to rest i cant get it to burn anything now but it does still scan i just did this scan on it. burnt with my 7220S
pretty good burn i think seeing it was a Xvid and i converted it to dvd format and burnt with imgburn. oh yea its on one of them sweeeeet TY's lol 8x-r burnt at 8x.
|
AfterDawn Addict
4 product reviews
|
4. January 2010 @ 22:08 |
Link to this message
|
well i think im set for hdd for the time being.
just got my 500gb seagate back from RMA. entire new drive. plus i just got the rewards points from dell and ordered a WD1001FALS. minus rewards points it only cost me $38.99. gotta love that. not sure if im gonna install it when i get it or wait and put it on the new mobo. might be about the same time anyway. im only gonna run 3 hdds(250,500, 1tb) and 3 sata burners. yup that means i have to get me a 3rd sata burner. still havent made up my mind if its gonna be a BR player or not. got a couple burns im gonna do tonight when i get home so i might post a scan or 2 tonight.
|
AfterDawn Addict
|
4. January 2010 @ 22:20 |
Link to this message
|
Originally posted by cincyrob:
well i think im set for hdd for the time being.
just got my 500gb seagate back from RMA. entire new drive. plus i just got the rewards points from dell and ordered a WD1001FALS. minus rewards points it only cost me $38.99. gotta love that. not sure if im gonna install it when i get it or wait and put it on the new mobo. might be about the same time anyway. im only gonna run 3 hdds(250,500, 1tb) and 3 sata burners. yup that means i have to get me a 3rd sata burner. still havent made up my mind if its gonna be a BR player or not. got a couple burns im gonna do tonight when i get home so i might post a scan or 2 tonight.
1. U suk!!
2. How you get dem points?
3. 1TB drive? Man I just bought one but it cost $79.99 delivered. ;)
4. BR player/reader? I'd look at da ASUS at da EGG. It's an external and that might come in handy. :D
5. Get dat new MOBO and get to work!! hehehee. :p I want you to get a BR reader/player too.. I wants to know how you do with it. :O
6. Happy New Year Robert... I was j/k about the U SUK part! <|:)~
|
AfterDawn Addict
4 product reviews
|
4. January 2010 @ 22:31 |
Link to this message
|
Originally posted by greensman:
1. U suk!!
Not as bad as you. lol
2. How you get dem points?
I got them from when i bought the wifes lappy. they told me i could redeem them when i wanted on certain things. the HDD was that certain thing..lol
3. 1TB drive? Man I just bought one but it cost $79.99 delivered. ;)
yea the drive i got is normaly $99
4. BR player/reader? I'd look at da ASUS at da EGG. It's an external and that might come in handy. :D
yea i want the reader if i get one. not ready to tackle the hi-dollar BR-Disc
5. Get dat new MOBO and get to work!! hehehee. :p I want you to get a BR reader/player too.. I wants to know how you do with it. :O
6. Happy New Year Robert... I was j/k about the U SUK part! <|:)~
whats a friend for if ya cant joke.
hey you want/need a 500gb segate 32mb cache hdd?
|
AfterDawn Addict
|
4. January 2010 @ 22:36 |
Link to this message
|
Originally posted by cincyrob:
Originally posted by greensman:
1. U suk!!
Not as bad as you. lol
2. How you get dem points?
I got them from when i bought the wifes lappy. they told me i could redeem them when i wanted on certain things. the HDD was that certain thing..lol
3. 1TB drive? Man I just bought one but it cost $79.99 delivered. ;)
yea the drive i got is normaly $99
4. BR player/reader? I'd look at da ASUS at da EGG. It's an external and that might come in handy. :D
yea i want the reader if i get one. not ready to tackle the hi-dollar BR-Disc
5. Get dat new MOBO and get to work!! hehehee. :p I want you to get a BR reader/player too.. I wants to know how you do with it. :O
6. Happy New Year Robert... I was j/k about the U SUK part! <|:)~
whats a friend for if ya cant joke.
hey you want/need a 500gb segate 32mb cache hdd?
Are you serious?? What's wrong with it? hehehee. :p
|
AfterDawn Addict
4 product reviews
|
4. January 2010 @ 22:39 |
Link to this message
|
|
yes im serious. nothing is wrong with it. still in the box.
|
Senior Member
|
4. January 2010 @ 23:03 |
Link to this message
|
Originally posted by cincyrob:
yes im serious. nothing is wrong with it. still in the box.
The only thing wrong with it is it's a Seagate.
|
AfterDawn Addict
|
4. January 2010 @ 23:11 |
Link to this message
|
greensman,
Quote:
Are you serious?? What's wrong with it? hehehee. :p
Not a whole lot before it "Bricks"!
http://www.newegg.com/Product/Product.aspx?Item=N82E16822148294
The failure rate of the Seagate, is why I picked the Western Digital Caviar Black WD5001AALS 500GB 7200 RPM SATA 3.0Gb/s drive for a Christmas present from a good Friend. I looked the two drives up on the net, and it didn't take me long to ask for my first Western Digital drive in over 5 years. It was no Contest! The Newegg numbers tell the tale
http://www.newegg.com/Product/Product.aspx?Item=N82E16822136320
It's Quiet, runs Cool, and it's Fast! Not as fast as the FALS, but still plenty fast enough. Now that I can split the load of DVDRB/CCE rebuilds over three drives, it cuts 2 to 3 minutes off of every rebuild. It seems to work best with the program running on my boot drive, the Output Folder on the second drive and the work folder on the 500, which is the fastest
GigaByte 990FXA-UD5 - AMD FX-8320 @4.0GHz @1.312v - Corsair H-60 liquid CPU Cooler - 4x4 GB GSkill RipJaws DDR3/1866 Cas8, 8-9-9-24 - Corsair 400-R Case - OCZ FATAL1TY 550 watt Modular PSU - Intel 330 120GB SATA III SSD - WD Black 500GB SATA III - WD black 1 TB Sata III - WD Black 500GB SATA II - 2 Asus DRW-24B1ST DVD-Burner - Sony 420W 5.1 PL-II Suround Sound - GigaByte GTX550/1GB 970 Mhz Video - Asus VE247H 23.6" HDMI 1080p Monitor
 |
AfterDawn Addict
4 product reviews
|
6. January 2010 @ 10:41 |
Link to this message
|
well ya wont hear me bash seagate. ive never had a bad drive from them. the reason this one got RMA'd is prolly cause of my own doing. i have a total of 11 seagate drives and not 1 has failed on me.4 of them are almost 6 years old.
i have only had 1 wd drive thats my GP500gb that i have now. and no issues with it. and the WD1001FALS is on the way i should have it tomorrow. if the snow storm allows ups to run tomorrow..lol
here is a nice little burn. i used nero to create img and then scan. burnt at 12x and scanned at 4x on the AD7220S all done on this drive.
|
AfterDawn Addict
4 product reviews
|
7. January 2010 @ 08:57 |
Link to this message
|
just got the new WD1001FALS drive in... but come one HDD manufactures. i buy a 1tb drive i want 1TB of space not 931gb after winblows takes its share... just like the tax man....lol
with my 4 drives in now i have just under 2tb of space(1863) time for some (torrent)fun.
I just got some disc. cheapy's 11.99 for 100ct. the name brand is "VALUE DISC" thats it...lol they got the haze on the top of them kinda looking like windata's without any writing on them.
here is what the code out as
----------------------------------------------------------------------------
Unique Disc Identifier : [DVD+R:CMC MAG-M01-000]
----------------------------------------------------------------------------
Disc & Book Type : [DVD+R] - [DVD-ROM]
Manufacturer Name : [CMC Magnetics Corp.]
Manufacturer ID : [CMC MAG]
Media Type ID : [M01]
Product Revision : [Not Specified]
Blank Disc Capacity : [2,295,104 Sectors = 4.70 GB (4.38 GiB)]
Recording Speeds : [1x-2.4x , 4x , 6x-8x , 6x-16x]
----------------------------------------------------------------------------
[ DVD Identifier V5.2.0 - http://DVD.Identifier.CDfreaks.com ]
----------------------------------------------------------------------------
and here is what they look like(taken with my new Nikon D3000)
this is the front side
and the back
and this is a view of the snow storm we are in the middle of right now.supose to get 6-9in.
http://i72.photobucket.com/albums/i196/Cincrob/DSC_0456.jpg
This message has been edited since posting. Last time this message was edited on 7. January 2010 @ 10:50
|
AfterDawn Addict
4 product reviews
|
7. January 2010 @ 12:15 |
Link to this message
|
just redid the first harry potter. gonna do them all(again)
used dvd-reb to make it fit onto a DVD5 7.2gb movie done includeing making a .ISO file for it in 26 min.
i used Hanks encoder. plus i hade the work folder on the 500gb hdd and the output going to the new 1tb drive. super fast i think. here is the log from HC.
[11:33:13] One Click encoding activated...
-----------------
[11:33:13] Phase I, PREPARATION started.
- DVD-RB v1.26.0
- AVISYNTH 2.6.0.1
- HC v0.21.0.0 encoder selected
- "Steal Space from Extras" mode (50%) is enabled.
- Source: HARRY_POTTER_SORCERERS_STONE
- VTS_01: 3,681,619 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 226,847 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 52.8%
- Overall Bitrate : 3,598/2,879Kbs
- Space for Video : 3,324,614KB
- HIGH/LOW/TYPICAL Bitrates: 7,720/1,766/2,879 Kbs
[11:34:53] Phase I, PREPARATION completed in 1 minutes.
[11:34:53] Phase II ENCODING started
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1
- Creating M2V for VTS_01 segment 2
- Creating M2V for VTS_01 segment 3
- Creating M2V for VTS_01 segment 4
- Creating M2V for VTS_01 segment 5
- Creating M2V for VTS_01 segment 6
- Creating M2V for VTS_01 segment 7
- Creating M2V for VTS_01 segment 8
- Creating M2V for VTS_01 segment 9
- Creating M2V for VTS_01 segment 10
- Creating M2V for VTS_01 segment 11
- Creating M2V for VTS_01 segment 12
- Creating M2V for VTS_01 segment 13
- Creating M2V for VTS_01 segment 14
- Creating M2V for VTS_01 segment 15
- Creating M2V for VTS_01 segment 16
- Creating M2V for VTS_01 segment 17
- Creating M2V for VTS_01 segment 18
- Creating M2V for VTS_01 segment 19
- Creating M2V for VTS_01 segment 20
- Creating M2V for VTS_01 segment 21
- Creating M2V for VTS_01 segment 22
- Creating M2V for VTS_01 segment 23
- Creating M2V for VTS_01 segment 24
- Creating M2V for VTS_01 segment 25
- Creating M2V for VTS_01 segment 26
- Creating M2V for VTS_01 segment 27
- Creating M2V for VTS_01 segment 28
- Creating M2V for VTS_01 segment 29
- Creating M2V for VTS_01 segment 30
- Creating M2V for VTS_01 segment 31
- Creating M2V for VTS_01 segment 32
- Creating M2V for VTS_01 segment 33
- Creating M2V for VTS_01 segment 34
- Creating M2V for VTS_01 segment 35
- Creating M2V for VTS_01 segment 36
- Creating M2V for VTS_01 segment 37
- Creating M2V for VTS_01 segment 38
- Creating M2V for VTS_01 segment 39
- Creating M2V for VTS_01 segment 40
- Extracting STILLS for VTS_01 segment 41
[11:51:51] Phase II ENCODING completed in 17 minutes.
[11:51:52] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_01
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 1 VOBID 2 CELLID 1
- Updating NAVPACKS for VOBID_02
- Rebuilding seg 2 VOBID 3 CELLID 1
- Rebuilding seg 3 VOBID 3 CELLID 2
- Rebuilding seg 4 VOBID 3 CELLID 3
- Rebuilding seg 5 VOBID 3 CELLID 4
- Rebuilding seg 6 VOBID 3 CELLID 5
- Rebuilding seg 7 VOBID 3 CELLID 6
- Rebuilding seg 8 VOBID 3 CELLID 7
- Rebuilding seg 9 VOBID 3 CELLID 8
- Rebuilding seg 10 VOBID 3 CELLID 9
- Rebuilding seg 11 VOBID 3 CELLID 10
- Rebuilding seg 12 VOBID 3 CELLID 11
- Rebuilding seg 13 VOBID 3 CELLID 12
- Rebuilding seg 14 VOBID 3 CELLID 13
- Rebuilding seg 15 VOBID 3 CELLID 14
- Rebuilding seg 16 VOBID 3 CELLID 15
- Rebuilding seg 17 VOBID 3 CELLID 16
- Rebuilding seg 18 VOBID 3 CELLID 17
- Rebuilding seg 19 VOBID 3 CELLID 18
- Updating NAVPACKS for VOBID_03
- Rebuilding seg 20 VOBID 4 CELLID 1
- Rebuilding seg 21 VOBID 4 CELLID 2
- Rebuilding seg 22 VOBID 4 CELLID 3
- Rebuilding seg 23 VOBID 4 CELLID 4
- Rebuilding seg 24 VOBID 4 CELLID 5
- Rebuilding seg 25 VOBID 4 CELLID 6
- Rebuilding seg 26 VOBID 4 CELLID 7
- Rebuilding seg 27 VOBID 4 CELLID 8
- Rebuilding seg 28 VOBID 4 CELLID 9
- Rebuilding seg 29 VOBID 4 CELLID 10
- Rebuilding seg 30 VOBID 4 CELLID 11
- Rebuilding seg 31 VOBID 4 CELLID 12
- Rebuilding seg 32 VOBID 4 CELLID 13
- Rebuilding seg 33 VOBID 4 CELLID 14
- Rebuilding seg 34 VOBID 4 CELLID 15
- Rebuilding seg 35 VOBID 4 CELLID 16
- Rebuilding seg 36 VOBID 4 CELLID 17
- Rebuilding seg 37 VOBID 4 CELLID 18
- Updating NAVPACKS for VOBID_04
- Rebuilding seg 38 VOBID 5 CELLID 1
- Updating NAVPACKS for VOBID_05
- Rebuilding seg 39 VOBID 6 CELLID 1
- Updating NAVPACKS for VOBID_06
- Rebuilding seg 40 VOBID 7 CELLID 1
- Updating NAVPACKS for VOBID_07
- Rebuilding seg 41 VOBID 8 CELLID 1
- Updating NAVPACKS for VOBID_08
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_01_0.IFO
- Updating TMAP table...
- Correcting VTS Sectors...
- Building ISO Image...
- ISO Image successfully created.
[11:59:55] Phase III, REBUILD completed in 8 minutes.
Done.
[11:59:55] PREPARE/ENCODE/REBUILD completed in 26 min.
here is the CRT of this burn and then the scan
got me wondering here. it wouldnt burn past the 6x speed. i had it set for 12x. it went up pass 8x and droped down to 6x. i amdoing another burn on my 7200S and it is burning fine at 8x... i am wondering if im haven a issue with the ide controler on this board. my 20A4P wont do anything any more and now the 7200A is haven issues.. it could just be this is a new media for it and haven issues there??
EDIT:
here is the one i just did. disc 2 disc useing anydvd/clonedvd2(still the best combo there is) burnt on this valuedisc media. @8x no issues. plus the scan looks better. actually pretty good for CMC MAG. yea i know dont lash me BlivetNC(friends dont let friends burn CMC MAG)
This message has been edited since posting. Last time this message was edited on 7. January 2010 @ 13:04
|
AfterDawn Addict
7 product reviews
|
7. January 2010 @ 12:52 |
Link to this message
|
Rob, Have a read ;)
1Tb = 931gb. I have 3 1Tb drives. What it amounts to is binary classification, and the industry takes advantage of it for marketing means. At least that's my opinion on it.
Quote:
Actually its due to differences in how a TB is classified.
1TB = 1,000,000,000,000B
931.32*1024*1024*1024 = 1,000,000,000,000B
HDD makers measure storage in decimal, Windows does it in binary.
To delete, or not to delete. THAT is the question! |
AfterDawn Addict
4 product reviews
|
7. January 2010 @ 13:09 |
Link to this message
|
|
LMAO.
OM7 i know. ive read that once or twice.. its just the point of it. come on 69gb lostcause winblows and the hdd manufactures cant get there act together for us people that keep them singin "Oh Happy Days" lol
as Travis Tritt once sang lord have mercy on the workin man....
gonna try real hard to get the UD3P mobo here within 2 weeks. i want this board out of my hair. i hate it...lol ill slap my E8400 oc'd a little to 3.2ghz and let the boys have it to play COD and what ever on it...lol
|
Moderator
|
7. January 2010 @ 13:44 |
Link to this message
|
Rob, any reason you haven't upgraded DVD-RB to 1.28.2 and HC to 0.23 ?. I know if it's not broke don't fix it but i use the above very often and they're bulletproof (as your versions probably are). And let's be honest, these are most likely the last versions of this proggie, what with BD Rebuilder being worked on now.
Also, don't be scared/wary of those CMC MAG M01's, i have used thousands of them, they're excellent discs.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 7. January 2010 @ 13:44
|
AfterDawn Addict
|
7. January 2010 @ 13:51 |
Link to this message
|
|
I thought Joe Ryan had taught all of us that CMC Mags were not the plague. I won't hesitate to buy them at a cheap price. I almost wish Office Depot had gone to them rather than the Ritek F16 although I haven't had issues with them either.JM2C
|
AfterDawn Addict
7 product reviews
|
7. January 2010 @ 14:27 |
Link to this message
|
Indeed. My CMC MAG's are ok(DataWrite). I haven't had a coaster with them yet. But I don't use them very often. And I only use them on good burners ;) E.G. Lite-on or Optiarcs.
To delete, or not to delete. THAT is the question! |
AfterDawn Addict
|
7. January 2010 @ 14:58 |
Link to this message
|
LOL... it's just the way Windose sees it. ;)
NICE storage RObert. I've gotta do some "cleaning" to make room for the new stuff going into my puter soon. :) I'll be adding 1.5TB within the week I'm sure but I have so much to clean and arrange it'll take me WAY more time to get ready than it will to "format and install". :p
Geez... I'm behind... you fellas posted some stuff while I was messing around and I didn't realize it. ;) I've used a few of those CMC MAG M01's and they are ok but as Oman7 said you gotta use a good burner to do it. ;) My friend had some sort of Philips external and it was TERRIBLE with those discs!! All of the ones he backed up for me while I was teaching him how to burn have gone "bad"... only 3 I think. I have the Ben Hogan lesson DVD's somewhere and haven't checked them... I'm worried now... :(
This message has been edited since posting. Last time this message was edited on 7. January 2010 @ 15:07
|
AfterDawn Addict
|
7. January 2010 @ 16:50 |
Link to this message
|
|
@greensman
I thought we all had good burners? LOL
I guess I'll have to go out and find a 3TB drive just to up the ante. Don't we have enough gadgets yet, LMAO
|
AfterDawn Addict
|
7. January 2010 @ 16:58 |
Link to this message
|
Here's a couple of scans
Ritek F-16
Verb MCC RG20
While the Ritek's appear to do a better job, their quality is maddeningly inconsistent! It just seems to be pot luck, whether you get a good one or not. Some were so poor I threw them away! The verbs? These will be my last -R DVDs. They take forever to address in any computer. If it's a slow computer it takes over a minute to address the DVD! The +Rs are much better quality DVDs.
I may have one more go at -Rs, because I haven't used Yudens in a while, and they don't seem to have any +Rs. Anyone care to comment on these, or recommend something better, feel free?
http://www.newegg.com/Product/Product.aspx?Item=N82E16817294005
Best Regards,
Russ
GigaByte 990FXA-UD5 - AMD FX-8320 @4.0GHz @1.312v - Corsair H-60 liquid CPU Cooler - 4x4 GB GSkill RipJaws DDR3/1866 Cas8, 8-9-9-24 - Corsair 400-R Case - OCZ FATAL1TY 550 watt Modular PSU - Intel 330 120GB SATA III SSD - WD Black 500GB SATA III - WD black 1 TB Sata III - WD Black 500GB SATA II - 2 Asus DRW-24B1ST DVD-Burner - Sony 420W 5.1 PL-II Suround Sound - GigaByte GTX550/1GB 970 Mhz Video - Asus VE247H 23.6" HDMI 1080p Monitor
|
AfterDawn Addict
7 product reviews
|
7. January 2010 @ 17:07 |
Link to this message
|
|
Yuden -R's are awesome to say the least. TYG02's like the ones you just linked will NOT give you any trouble. The TYG03's (16X Discs) do very well despite their scan quality.
To delete, or not to delete. THAT is the question! |
AfterDawn Addict
|
7. January 2010 @ 17:11 |
Link to this message
|
Originally posted by theonejrs:
While the Ritek's appear to do a better job, their quality is maddeningly inconsistent! It just seems to be pot luck, whether you get a good one or not. Some were so poor I threw them away! The verbs? These will be my last -R DVDs. They take forever to address in any computer. If it's a slow computer it takes over a minute to address the DVD! The +Rs are much better quality DVDs.
I may have one more go at -Rs, because I haven't used Yudens in a while, and they don't seem to have any +Rs. Anyone care to comment on these, or recommend something better, feel free?
http://www.newegg.com/Product/Product.aspx?Item=N82E16817294005
Best Regards,
Russ
Russ the TY's you linked to are the REAL deal from what I can tell.. Premium line if I'm seeing it correctly. :) They should code out to TYG02 and are brilliant discs!!! NEVER had a coaster with 100's of burns that wasn't caused by doing something stupid... so all my or my computers fault. ;)
I think you can get them cheaper thru SMS or Meritline but if you have some credit with the EGG I understand. :)
good lucky buddy!!!!
|
AfterDawn Addict
|
7. January 2010 @ 19:52 |
Link to this message
|
This is what I mean when I talk about the Ritek F-16s being inconsistent!
It's horrible! Totally unacceptable! Threw it in the trash!
This is the same movie burned on one of the -R Verbs. Same burn speed, and same settings in Nero Disk Quality test!
The previous Ritek burn from my last post was decent enough, but this one is crap! The Verb, burned so much better! My blank DVDs are all stored in the bottom drawer of my desk, and never see any sunlight. The cake boxes are always kept closed, and it never gets very hot in here, even in the summertime as I have the AC on then! This whole batch of F-16s has been like this! In my eyes they are junk!
Best Regards,
Russ
GigaByte 990FXA-UD5 - AMD FX-8320 @4.0GHz @1.312v - Corsair H-60 liquid CPU Cooler - 4x4 GB GSkill RipJaws DDR3/1866 Cas8, 8-9-9-24 - Corsair 400-R Case - OCZ FATAL1TY 550 watt Modular PSU - Intel 330 120GB SATA III SSD - WD Black 500GB SATA III - WD black 1 TB Sata III - WD Black 500GB SATA II - 2 Asus DRW-24B1ST DVD-Burner - Sony 420W 5.1 PL-II Suround Sound - GigaByte GTX550/1GB 970 Mhz Video - Asus VE247H 23.6" HDMI 1080p Monitor
|
|
bigwill68
Suspended permanently
|
7. January 2010 @ 22:37 |
Link to this message
|
Done out of Here!
This message has been edited since posting. Last time this message was edited on 7. January 2010 @ 23:07
|
|
Advertisement
|
|
|
AfterDawn Addict
7 product reviews
|
8. January 2010 @ 00:43 |
Link to this message
|
|
Russ, are you using lite-on smart tools on the 7220S? It's actually a lite-on drive. I bet it can utilize smartburn...
To delete, or not to delete. THAT is the question! |
