|
overclocking amd 2800 athlon xp
|
|
Member
|
17. December 2004 @ 11:47 |
Link to this message
|
|
thanks capncrash, it is a bless im very happy.
well kalunyoku 3.0 ive never seen anybody doing that and specially air cooling!!.
but who knows?!!
can be done if your mobo or cpu can take 240 fsb and maybe vcore of 1.8 or 1.9volts who knows?? and will it be stable that another story jejejeje
Dr.xp
Pentium D 805 2.66ghz
Foxconn 8400 GS 512 GDDR2 PCI-EX
2gb DDR2 Pc2-5300
|
|
Advertisement
|
 |
|
|
|
kalunjoku
Suspended permanently
|
17. December 2004 @ 17:34 |
Link to this message
|
|
I dunno, I think i want to be the first person to OC a 2800 to 3 just on air cooling. if it gets too hot, my computer will shut off or lock up...if i even make it past booting up. I figured if i set my FSB to 200 and my multiplier to 15 i may be able to do it, and a vcore of 1.8. I know 5 fans probably won't be enough, but maybe if i opened a window and a door and let a breeze come in, with my case open.(it is december you know) and I may be able to do it for a short while. It's worth a try though. Then again, a 2800 at 2.4 like mine is fast enough for me.
Kalunjoku
AMD Athlon XP 2800+ OC'd to 2.41 GHz
Thermaltake Volcano 12 CPU Fan (5800+ RPM)
Thermaltake GIANT III VGA cooler w/9000RPM fan add-on
ASUS A7N8X-X Nforce2 Motherboard
Kingston 1GB(PC3200) w/Thermaltake RAMsinks
|
Member
|
18. December 2004 @ 04:27 |
Link to this message
|
|
kalu go for it!!! remember that good mem like ddr 400 will help on stability or ddr 550 like mine because of the cpu/ram ratio 1:1.
let us know!!
overclocking is not about the numbers!
Dr.xp
Pentium D 805 2.66ghz
Foxconn 8400 GS 512 GDDR2 PCI-EX
2gb DDR2 Pc2-5300
|
|
Molks
Junior Member
|
18. December 2004 @ 05:09 |
Link to this message
|
|
Oi lads, plz, If you are going to talk off topic, about water cooling, then yes I for one would like some experience. I got my hands on a black ice pro II dual with this n that for a good price, do you go for a pump with high volume flow or a slower steadier flow?
XP2500-M barton @ 2.7Ghz NexXxos water 1l/min flow
DDR400 2Gig
9800SE -> 9800pro
God is real unless declared integer
|
|
Molks
Junior Member
|
18. December 2004 @ 05:38 |
Link to this message
|
|
kalunjoku, I think you are a bit optimistic dude, blo0dy 'ell nipper 3.0Ghz on air could be done if you are an eskimo, or perhaps in the vacuum of space with a big can of pressurised air jetting onto it! (where on earth are you?)
XP2500-M barton @ 2.7Ghz NexXxos water 1l/min flow
DDR400 2Gig
9800SE -> 9800pro
God is real unless declared integer
|
|
Molks
Junior Member
|
18. December 2004 @ 05:53 |
Link to this message
|
|
Hey kalujoku Im not trying to discourage you but with that kind of overclock you will have to dissipate about 137 Watts of power with a Vcore of 1.9 at 15 x 200 Mhz FSB !) But hey keep up the good work and let us know how you get on.
XP2500-M barton @ 2.7Ghz NexXxos water 1l/min flow
DDR400 2Gig
9800SE -> 9800pro
God is real unless declared integer
|
|
kalunjoku
Suspended permanently
|
19. December 2004 @ 08:35 |
Link to this message
|
|
Im in Kentucky and it's around 30 degrees right now. Its starting to snow and the wind is blowing at a good speed. This seems like perfect time to do it. Wish me luck! I'll tell you all how it goes.
Kalunjoku
AMD Athlon XP 2800+ OC'd to 2.41 GHz
Thermaltake Volcano 12 CPU Fan (5800+ RPM)
Thermaltake GIANT III VGA cooler w/9000RPM fan add-on
ASUS A7N8X-X Nforce2 Motherboard
Kingston 1GB(PC3200) w/Thermaltake RAMsinks
|
Member
|
19. December 2004 @ 11:55 |
Link to this message
|
|
good luck!!!
Dr.xp
Pentium D 805 2.66ghz
Foxconn 8400 GS 512 GDDR2 PCI-EX
2gb DDR2 Pc2-5300
|
|
Inacoma
Newbie
|
19. December 2004 @ 15:27 |
Link to this message
|
|
hey all
well
im in the progress of upgrading my PSU to a Thermaltake 560watts
and i have added a Zalman Reserator 1 waterclooing in
when i install them ill keep you intouch
|
|
teztouz
Newbie
|
19. December 2004 @ 15:42 |
Link to this message
|
|
DUUUUUUUUDE niiiiice very cool!
|
|
Inacoma
Newbie
|
19. December 2004 @ 15:50 |
Link to this message
|
|
yeah i cant wait to get them
hopefully by the end of this week
:)
|
Member
|
20. December 2004 @ 05:52 |
Link to this message
|
|
NICE!!! A POWERFUL PSU IS VERY IMPORTANT IN OVERCLOCKING!!
Dr.xp
Pentium D 805 2.66ghz
Foxconn 8400 GS 512 GDDR2 PCI-EX
2gb DDR2 Pc2-5300
|
|
Inacoma
Newbie
|
20. December 2004 @ 05:54 |
Link to this message
|
|
yeah about time i guess
i wont to try get 2500mhz
thats my aim hope i get it
|
|
mickle207
Newbie
|
25. December 2004 @ 06:28 |
Link to this message
|
|
First of all, Merry Christmas everyone!
Here are my specs:
Athlon barton 2800+, Kingston ddr400 512mb + kingston ddr400 256mb, Asus A7n8x-E, geforce 5900fx, Seagate 80gb SATA,PSU Enermax 450w.
I just got my CPU oced to 2375mhz, FSB 190 and vcore 1.850volts. Is this optimal? I cant go further, but i still have 191~194 to try. Do u think i should keep it like this or push it to it's limits??? I also tested it out w/ Prime95 for 9 hours and there are no errors now.
I managed to get idle temp at 52c and loads temps oafter 9hrs @ 57c.
Thanks,
Michael
This message has been edited since posting. Last time this message was edited on 25. December 2004 @ 06:32
|
|
kalunjoku
Suspended permanently
|
25. December 2004 @ 06:51 |
Link to this message
|
|
mickle, you probably should lower the vore settings to 1.7. 1.8 isnt very safe for the processor. My 2800 XP is up to 2.41 and my vcore is at 1.7. I just increased my fsb to 200 and my multiplier to 12. Its fast too. Make sure you have proper cooling when overclocking your processor too.
Kalunjoku
AMD Athlon XP 2800+ OC'd to 2.41 GHz
Thermaltake Volcano 12 CPU Fan (5800+ RPM)
Thermaltake GIANT III VGA cooler w/9000RPM fan add-on
ASUS A7N8X-X Nforce2 Motherboard
Kingston 1GB(PC3200) w/Thermaltake RAMsinks
|
|
kalunjoku
Suspended permanently
|
25. December 2004 @ 06:54 |
Link to this message
|
|
Oh yeah, when i said i'd get my 2800 to 3.0, i got it to 3 and it got into windows and then locked up after 10 minutes. I had the windows open and my door cracked and it was during an ice storm! It was 7 degrees outside!!! Someday, hopefully, i can hold it at that temp without liquid. I'll keep tryin though.
Kalunjoku
AMD Athlon XP 2800+ OC'd to 2.41 GHz
Thermaltake Volcano 12 CPU Fan (5800+ RPM)
Thermaltake GIANT III VGA cooler w/9000RPM fan add-on
ASUS A7N8X-X Nforce2 Motherboard
Kingston 1GB(PC3200) w/Thermaltake RAMsinks
|
|
mickle207
Newbie
|
25. December 2004 @ 06:56 |
Link to this message
|
|
isnt 200mhz FSB unstable? i tried it w/ 1.850v and i often get bluescreens. My cooling is a water kit, just got it :D
|
|
kalunjoku
Suspended permanently
|
26. December 2004 @ 23:06 |
Link to this message
|
|
200 is just fine for mine. 1.85 Volts is not safe. You can screw up your processor. I dont understand why you're worried about your temp if your fsb would be at 200 and you are watercooling your processor. The only thing I'm worried about for you is your voltage.
Kalunjoku
AMD Athlon XP 2800+ OC'd to 2.41 GHz
Thermaltake Volcano 12 CPU Fan (5800+ RPM)
Thermaltake GIANT III VGA cooler w/9000RPM fan add-on
ASUS A7N8X-X Nforce2 Motherboard
Kingston 1GB(PC3200) w/Thermaltake RAMsinks
|
|
mickle207
Newbie
|
27. December 2004 @ 01:53 |
Link to this message
|
|
with 200mhz, i get an error in prime95 and that also goes for 191+.
i think 1.850 is pretty good!
|
Member
|
27. December 2004 @ 02:26 |
Link to this message
|
|
Merry X-mas to you all..
i got for x-mas a7n8x-e deluxe i put in the closet my abit nf7..
i put my 2800+ to 2.375mhz stable with 1.8vcore my abit nf7 wont let me pass from 2.2 dont know why since is a pretty good mobo!? my temps 37Cº idle 41cº load with volcano 12 with artic silver 5 ( still need to cover the 200 hours so it can work like it should)
Dr.xp
Pentium D 805 2.66ghz
Foxconn 8400 GS 512 GDDR2 PCI-EX
2gb DDR2 Pc2-5300
|
|
phredcong
Newbie
|
30. December 2004 @ 10:54 |
Link to this message
|
|
XP,
glad to see u got a REAL mobo..:).
mmmmmm, i'm thinking those AMD 64 prices are getting cheap....plus a DFI Lan Party UT mobo.
Best OC wishes for the new year to all!!
ASUS A7N8X-E Deluxe n-Force 2 Ultra
Athlon XP 2800+ @2.427ghz w/Thermaltake Volcano 11+ (jet propulsion :)
1GB Corsair Value Select PC3200 DDR400
Seagate Barracuda SATA 120 GB
Gigabyte GeForce 6800GT 256MB
Cheapo BTC CD-R/RW drive,
Trinitron 17"
This message has been edited since posting. Last time this message was edited on 30. December 2004 @ 10:56
|
|
slimnuts
Suspended due to non-functional email address
|
14. January 2005 @ 17:12 |
Link to this message
|
|
Hi there...new to the forum. Just thought I'd put my 2 cents in. Have a Barton 2800, and my temperature without overclocking runs between 31 and 32 degrees celcius. For some reason the case I purchased had the rear fan turned backwards, before I switched it around the temps were between 40 and 41 celcius. Ten degree improvement with just one fan. Now I think I'll venture into overclocking this bad baby.
Athlon XP 2800+ not Oc'ed
MSI KT4V-L Motherboard
512MB pc3200 DDR400
Radeon 9550 256MB 128-bit 8X AGP
120GB Maxtor
80GB Maxtor
Arctic Cooling Silent 2M
1 - 80mm stock case fan
|
Member
|
14. January 2005 @ 18:30 |
Link to this message
|
|
well i hope the prices drop more
but i still want to get the juice out of this mobo
Dr.xp
Pentium D 805 2.66ghz
Foxconn 8400 GS 512 GDDR2 PCI-EX
2gb DDR2 Pc2-5300
|
Member
|
14. January 2005 @ 18:43 |
Link to this message
|
|
hi slimnuts welcome to the forums!!!
wow 10 degrees with a single fan we all know that a big case helps but 3-5 maybe 7 degrees 10 that nice lucky you. i have 12 case fans im a fan lover..
but anyway you got a good mobo via chipset like kt266 or kt600 are not very overclocking freindly nforce 2 is the best in that matter. newer vias like kt-600, kt800 and msi mobos with the corcell chip that has a lots of ovc settings that something else...
but go ahead build your own xperience like all of us read and ask a lot in this forums when i first came to this forum i didnt know anything about ovc and know im helping others!!!.
something else your cpu cooler let see how it handle the extra heat your cpu gonna throw.
remember:
1-bartons are lock (vant change mult. 12.5 ofcourse your mobo wont let you).
2-change fsb in small amount
3-higher fsb higher vcore (remember not to pass 1.8volt)
4-extra cooling fans for your case intakes and exhaust.
let us know:
^^overclocking is not about the numbers^^
Dr.xp
Pentium D 805 2.66ghz
Foxconn 8400 GS 512 GDDR2 PCI-EX
2gb DDR2 Pc2-5300
|
|
Advertisement
|
|
|
Senior Member
|
15. January 2005 @ 09:18 |
Link to this message
|
|
never mind....sorry bout that
Console: PS2 v7, 8MB Nyko MC, 32MB Max MC, 16MB Gameshark MC, Multitap, Sony Controller, Nyko Controller, AirFlow Controller
Chip: DMS4 E.Z.I. Pro, ToxicOS v0.41, 100GB HDD
Handheld: PSP Firmware v1.5, 32MB MS Pro Duo, 2GB MS Pro Duo
HomeBrew: DevHook v0.46 w/ GUI Mod & USB Mod, Firmware v2.71 Emulated
This message has been edited since posting. Last time this message was edited on 15. January 2005 @ 09:19
|
