|
|
|
Error Burning with External DVD-Writer and USB2 (SCSI command aborted)
|
|
|
baabaa
AfterDawn Addict
|
4. October 2004 @ 22:30 |
Link to this message
|
|
The recordnow code points to power on/reset or bus device reset occuring.
Check for PC going into standby modes or power saving options such as hard drive/video and screensavers etc.......
...............PIO is no go, DMA all the way...............
Beware of the Pixies - they move in over night and turn your life upside down
|
|
Advertisement
|
 |
|
|
|
kimsmith
Newbie
|
5. October 2004 @ 03:18 |
Link to this message
|
I am sending in my update from my last comment. I downloaded the version of Nero .25. That seemed to fix the scsi problem that was called out when then burner is installed in the computer case, and disconnected the USB external case to make everything work properly.
Next I switched the Pioneer to the usb external case and the scsi errors returned. Lastly, I moved the cdrom burner back into the computer case, added a second IDE hard drive to the usb external case, and everything works gret.
I suspect the USB case does not have the latest upgrade or something. It could be that some software products like the USB device and some do not. I only used Nero and have not tried to use Roxio or anything else with the burner in the external case.
I just wanted to ask ccampbell if Nero has tested their software with different external USB cases? If, so, is there a list of the ones that were used?
Smitty
MCP, MCSA, MCDBA, MCSE 2000, MCSE 2003
|
|
chynk
Newbie
|
5. October 2004 @ 04:32 |
Link to this message
|
baabaa
Quote:
The recordnow code points to power on/reset or bus device reset occuring.
Check for PC going into standby modes or power saving options such as hard drive/video and screensavers etc.......
thanks. ill look into this. maybe im get problems with nero for thr same reason.
EDIT: i looked into it. everytime i burn, i have my ac power hooked up. i checked my power settings and i had nothing shut off or standby while the ac is plugged in. so i guess that rules this out. : )
This message has been edited since posting. Last time this message was edited on 5. October 2004 @ 08:27
|
|
ccampbell
Senior Member
|
5. October 2004 @ 09:27 |
Link to this message
|
Hi Chynk,
Could you upgrade to our latest Nero 6.3.1.25?
I want to make sure your not seeing an issue reported by others that caused this type of error message.
And make sure you do a Simulation write first, as I want to see if it passes Simulation but fails an actual write attempt.
And is that the latest firmware on your model recorder?
The reason I bring this up, is that I do no like seeing the below entry in the Nero Log file where it seems to indicate that it had trouble detecting the media as be useable.
7:19:06 PM #7 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-RAM.)
Regards,
Craig
Ahead Software
USA
|
|
baabaa
AfterDawn Addict
|
5. October 2004 @ 10:02 |
Link to this message
|
|
Hmm, I think to stop this being confusing, you should stick with one type of burning software unitl you get the main issue sorted....
From what I have read, your burner is relatively new and also USB 2.0, my opinion is that this where your problem may lie and not in either of the software.
I would definately check that your ports are capable of delivering the required current for your burner, and that you are not using a shared port.
Are you using any other USB devices whilst attempting to burn?
Also check your BIOS settings regarding power management and standby settings, usually windows will override these but there maybe something in there that is having an affect....
...............PIO is no go, DMA all the way...............
Beware of the Pixies - they move in over night and turn your life upside down
This message has been edited since posting. Last time this message was edited on 5. October 2004 @ 10:04
|
|
chynk
Newbie
|
5. October 2004 @ 10:18 |
Link to this message
|
@baabaa
during the summer, i was using my friends burner (exact same model) n all i had to do was plug it in. i used NERO6 n it was perfect.
after i upgraded to SP2 when i got back to school, the problems began.
so im pretty sure my usb ports are compatible with this burner.
@ccampbell
the latest firmware on my burner is A110. i d/led the firmware upgrade n upgraded it awhile ago. once i get back home, ill update my Nero n try to burn another dvd with a simulation first.
|
|
chynk
Newbie
|
5. October 2004 @ 11:27 |
Link to this message
|
updated my Nero to 6.3.1.25. tried to burn an image onto a ritek dvd-r 4x using my external usb2 iomega dvd+-r/rw burner. tried to run a simulation first... failed with "scsci command aborted".
craig, any ideas?
Quote:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
Nero version: 6.3.1.25
Recorder: <IOMEGA DVDRW4224E2Q-D> Version: A110 - HA 3 TA 0 - 6.3.1.25
Adapter driver: <> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.3.1.25
Adapter driver: <d347prt> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-R6012 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
TOSHIBA DVD-ROM SD-R6012 D: CDRom0
Generic DVD-ROM Z: CDRom1
IOMEGA DVDRW4224E2Q-D E: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 991MB (1015280kB)
Free physical memory: 561MB (574648kB)
Memory in use : 43 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.10.2004
Burn DVD Image
2:24:38 PM #1 Text 0 File Reader.cpp, Line 126
Reader running
2:24:38 PM #2 Text 0 File Writer.cpp, Line 124
Writer IOMEGA DVDRW4224E2Q-D running
2:24:38 PM #3 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using DVD media
2:24:38 PM #4 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1780693 (395:42.43, 3477MB)
2:24:38 PM #5 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
2:24:38 PM #6 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: IOMEGA DVDRW4224E2Q-D, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193
2:24:38 PM #7 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:24:38 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 1780694 (1780694) = #1780694/395:42.44
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1780694 blocks [IOMEGA DVDRW4224E2Q-D ]
--------------------------------------------------------------
2:24:38 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [IOMEGA DVDRW4224E2Q-D ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3646861312, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1780694 | lead-out | 1 | 0x00 | 0x41
2:24:38 PM #10 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started
2:24:39 PM #11 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.
2:24:39 PM #12 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed
2:24:39 PM #13 Phase 32 File dlgbrnst.cpp, Line 1855
Simulation started at 4x (5,540 KB/s)
2:24:39 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
2:24:39 PM #15 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 11:07,812 (667812ms) -> OK
2:24:39 PM #16 Text 0 File DVDR.cpp, Line 2000
Recording mode: Sequential Recording Mode
2:24:39 PM #17 Text 0 File Mmc.cpp, Line 20660
Set BUFE: supported -> ON
2:24:39 PM #18 Text 0 File DVDR.cpp, Line 2141
Start write address at LBA 0
DVD high compatibility mode: Yes
2:24:39 PM #19 Text 0 File Cdrdrv.cpp, Line 8230
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
2:24:44 PM #20 Text 0 File Cdrdrv.cpp, Line 1297
14:24:44.046 - IOMEGA DVDRW4224E2Q-D\H3 T0 : Queue again later
2:24:53 PM #21 SCSI -500 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x03F50000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
2:24:53 PM #22 CDR -500 File Writer.cpp, Line 304
SCSI command aborted
IOMEGA DVDRW4224E2Q-D\H3 T0
2:24:53 PM #23 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
2:24:53 PM #24 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
2:24:53 PM #25 Text 0 File DVDR.cpp, Line 2383
EndDAO: Last written address was -1
2:24:53 PM #26 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
2:24:53 PM #27 CDR -1114 File WriterStatus.cpp, Line 164
Reset occurred
2:24:53 PM #28 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once
2:24:53 PM #29 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
2:24:53 PM #30 Phase 34 File dlgbrnst.cpp, Line 1855
Simulation failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 9/27/2004 3:38:36 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 8/22/2004 4:31:48 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
baabaa
AfterDawn Addict
|
5. October 2004 @ 11:52 |
Link to this message
|
A little history helps alot, cheers.....that rules a posible power issue to the ports.....
Well, to be honest if it worked OK before SP2, then I would uninstall SP2 and see if it goes back to how it was, then update Nero to the latest version and retry it, then if everything is sitting good, install SP2........
I do know that microsoft published a list of software that had issues with SP2 but I don't think Nero (ahead) was on there......ccampbell will be able to direct you there.
...............PIO is no go, DMA all the way...............
Beware of the Pixies - they move in over night and turn your life upside down
|
|
ccampbell
Senior Member
|
5. October 2004 @ 12:00 |
Link to this message
|
Well, at least we know that it occurs with Simulation as well, so this does make me lean towards issue with the USB bus, and what BaaBaa says is right. At this point we need to see if SP2 is an issue. This is the first I've heard of issues with the USB Bus, SP2, and Nero, but SP2 has been causing different problems for every user. Which makes it very frustrating to resolve.
Uninstall SP2 and see if this does in fact resolve the issue, and let me know your results.
Regards,
Craig
Ahead Software
USA
|
|
kimsmith
Newbie
|
5. October 2004 @ 13:18 |
Link to this message
|
This is for ccampbell, I am still having problems directly related to the usb connected Pioneer with Nero.
I do not have service pack 2 installed and I still get the scsi errors like everyone else. I saw an earlier post about updating the usb chip and want to know if that can be done on an external usb case?
Smitty
MCP, MCSA, MCDBA, MCSE 2000, MCSE 2003
|
|
ccampbell
Senior Member
|
5. October 2004 @ 13:31 |
Link to this message
|
|
Hi Kimsmith,
No, with an external case its the USB Bride board contained in the chassis that is the issue. You can only upgrade the drivers for your USB Controller on your computer.
Can you send me an Email at techsupport4@nero.com? I would like you try an older WNASPI driver of ours, that we use to address issues with the old HP8200 USB recorder. This WNASPI driver resolved issues we have with the USB Bridge board contained in that model drive. It's a long shot, but can't hurt to try.
Regards,
Craig
Ahead Software
USA
|
|
stncald
Newbie
|
5. October 2004 @ 14:50 |
Link to this message
|
hi:
i had the "scsi abort" problem with my burner (nec 2510a). i have read your forum with interest as i too have been trying to solve this issue. every time i tried to burn a dvd-r with Nero i got the dreaded scsi abort.
i have contacted support for the burner (the burner is nec, the company is mad dog multimedia), and i wrote Nero also. none of the fixes offered by either source have worked.
from your forum, i tried craig's suggestion of changing the name of nero's aspi. the problem with that is the Nero does not recognize the dvd. i have updated to the latest Nero software. from mdmm, i updated the firmware for the burner.
now, i have had success burning dvds to dvd+r. i am not sure exactly if i understand the difference between the two formats. i know burning to dvd+r is not the greatest solution, especially when you've bought a slew of dvd-r disc, but it is an alternative you can try.
meanwhile, i'll keep reading. your posts are very informative.
|
|
chynk
Newbie
|
5. October 2004 @ 15:21 |
Link to this message
|
@ccampbell
i just uninstalled SP2 from my add/remove list and restarted.
i ran a simulation at 4X n everything went fine... because i did not want to burn my DVD-R at 4X, i canceled it n tried to burn it again at 2X, this time unchecking the simulation box.
SCSI COMMAND ABORTED AGAIN!!!!!!
heres the damned log:
Quote:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
Nero version: 6.3.1.25
Recorder: <IOMEGA DVDRW4224E2Q-D> Version: A110 - HA 3 TA 0 - 6.3.1.25
Adapter driver: <> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.3.1.25
Adapter driver: <d347prt> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-R6012 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
TOSHIBA DVD-ROM SD-R6012 D: CDRom0
Generic DVD-ROM Z: CDRom1
IOMEGA DVDRW4224E2Q-D E: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 991MB (1015280kB)
Free physical memory: 543MB (556324kB)
Memory in use : 45 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.10.2004
Burn DVD Image
6:14:59 PM #1 Text 0 File Reader.cpp, Line 126
Reader running
6:14:59 PM #2 Text 0 File Writer.cpp, Line 124
Writer IOMEGA DVDRW4224E2Q-D running
6:14:59 PM #3 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using DVD media
6:15:20 PM #4 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1780693 (395:42.43, 3477MB)
6:15:20 PM #5 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
6:15:20 PM #6 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: IOMEGA DVDRW4224E2Q-D, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193
6:15:20 PM #7 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-RAM.)
6:15:20 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 1780694 (1780694) = #1780694/395:42.44
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1780694 blocks [IOMEGA DVDRW4224E2Q-D ]
--------------------------------------------------------------
6:15:21 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [IOMEGA DVDRW4224E2Q-D ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3646861312, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1780694 | lead-out | 1 | 0x00 | 0x41
6:15:21 PM #10 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started
6:15:21 PM #11 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.
6:15:21 PM #12 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed
6:15:21 PM #13 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 2x (2,770 KB/s)
6:15:21 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
6:15:21 PM #15 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 22:10,624 (1330624ms) -> OK
6:15:21 PM #16 Text 0 File DVDR.cpp, Line 2000
Recording mode: Sequential Recording Mode
6:15:21 PM #17 Text 0 File Mmc.cpp, Line 20660
Set BUFE: supported -> ON
6:15:21 PM #18 Text 0 File DVDR.cpp, Line 2141
Start write address at LBA 0
DVD high compatibility mode: Yes
6:15:21 PM #19 Text 0 File Cdrdrv.cpp, Line 8230
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
6:15:54 PM #20 SCSI -500 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x03C90000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
6:15:54 PM #21 CDR -500 File Writer.cpp, Line 304
SCSI command aborted
IOMEGA DVDRW4224E2Q-D\H3 T0
6:15:54 PM #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
6:15:54 PM #23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
6:15:54 PM #24 Text 0 File DVDR.cpp, Line 2383
EndDAO: Last written address was -1
6:16:35 PM #25 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
6:16:35 PM #26 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
6:16:35 PM #27 Phase 38 File dlgbrnst.cpp, Line 1855
Burn process failed at 2x (2,770 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 9/27/2004 3:38:36 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 8/22/2004 4:31:48 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
as you can see, im gettin this again:
Quote:
6:15:20 PM #7 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-RAM.)
|
|
chynk
Newbie
|
5. October 2004 @ 18:10 |
Link to this message
|
just SUCCESSFULLY burned an image onto a memorex dvd-rw at 2X.
heres the link (http://www.angelfire.com/hiphop3/chynkrecordz/log.txt)
didnt wanna post it cuz i post so many!!! other users must be gettin annoyed :(
----------------------------
BTW, i dont know if this has any significance (probably does) but when i try to run the nero cd-dvd speed test, it only works when i inserted a dvd-rw. when i try it with a dvd-r, it gives me the error msg: ERROR - PARAMETER VALUE INVALID (052602)
------------------------------
i was double checking my USB drivers n this is wat i found:
http://support.microsoft.com/default.aspx?scid=kb;en-us;329632
i visited this site n it says the most up-to-date drivers for sp1 is 5.1.2600.1106.
when i go to my device manager, i double click on "nec pci to usb open host controller" (i have 2) and everything checks out. however, when i double click on "standard enhanced pci to usb host controller", its version 5.1.2600.0
could this be the problem? how do i update it? i tried the microsoft method n couldnt get it to work
This message has been edited since posting. Last time this message was edited on 5. October 2004 @ 20:36
|
|
jphilipgr
Newbie
|
6. October 2004 @ 05:49 |
Link to this message
|
i have SCSI command aborted problem. i use an LG GDA 4120B dvd writer with Nero. it gives the error when burning DVDs. i have spoiled a number of CDs and DVDs already. the dvd writer is in an enclosure, connected to the USB. please help.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 11/06/1997 7:01:02 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/07/2004 5:33:44 PM
Nero version: 6.3.1.6
Recorder: <HL-DT-ST DVDRAM GSA-4120B>Version: A102 - HA 2 TA 0 - 6.3.1.6
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-ROM GDR8082N>Version: 0106 - HA 1 TA 0 - 6.3.1.6
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : HITACHI_DK23EB-40 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8082N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8082 E: CDRom0
HL-DT-ST DVDRAM GSA-4120 F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 509MB (522228kB)
Free physical memory: 331MB (339280kB)
Memory in use : 35 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.10.2004
===== Disc-Copy over image - 1st step : Copy to image ...
4:25:11 PM #1 Text 0 File Reader.cpp, Line 118
Reader running
4:25:11 PM #2 Text 0 File Writer.cpp, Line 124
Writer Image Recorder running
4:25:11 PM #3 Text 0 File DVDCopy.cpp, Line 263
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 995632 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0)
4:25:11 PM #4 Text 0 File DVDCopy.cpp, Line 355
Max -1 tracks of 1 allowed to copy
1: 0 - 995632 = 995632, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
4:25:11 PM #5 Text 0 File Burncd.cpp, Line 3198
Turn on Disc-at-once, using DVD media
4:25:11 PM #6 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2147483646 (477218:35.21, 4194303MB)
Last address to be written: 995631 (221:15.06, 1944MB)
4:25:11 PM #7 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE
4:25:11 PM #8 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?
4:25:11 PM #9 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
4:25:11 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 995632 (995632) = #995632/221:15.7
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 995632 blocks [ Image Recorder ]
--------------------------------------------------------------
4:25:11 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 2039361536, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
995632 | lead-out | 1 | 0x00 | 0x41
4:25:11 PM #12 Phase 120 File dlgbrnst.cpp, Line 1841
Creating the image for burning
4:25:11 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
4:34:51 PM #14 Text 0 File WriterStatus.cpp, Line 115
< Image Recorder > start writing Lead-Out at LBA 995632 (F3130h), lenght 0 blocks
4:34:51 PM #15 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
4:34:52 PM #16 Phase 121 File dlgbrnst.cpp, Line 1841
Creating Image completed successfully
===== Disc-Copy over image - 2nd step : Burn the image ...
4:35:03 PM #1 Text 0 File Reader.cpp, Line 118
Reader running
4:35:03 PM #2 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST DVDRAM GSA-4120B running
4:35:03 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = '
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = '
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 2039361536
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=221:15.07 ( 995632)
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\jphilip\My Documents\TempImage.nrg>
4:35:04 PM #4 Text 0 File Burncd.cpp, Line 3198
Turn on Disc-at-once, using DVD media
4:35:05 PM #5 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 995631 (221:15.06, 1944MB)
4:35:05 PM #6 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE
4:35:05 PM #7 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: HL-DT-ST DVDRAM GSA-4120B, Media type: DVD-R
Disc Manufacturer: VDSPMS - AB 01
Disc Application Code: 64, Disc Physical Code: 193
4:35:05 PM #8 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
4:35:05 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 995632 (995632) = #995632/221:15.7
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 995632 blocks [HL-DT-ST DVDRAM GSA-4120B]
--------------------------------------------------------------
4:35:05 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [HL-DT-ST DVDRAM GSA-4120B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2039054336, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
995632 | lead-out | 1 | 0x00 | 0x41
4:35:16 PM #11 Phase 65 File dlgbrnst.cpp, Line 1841
Burn process started
4:35:16 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
4:35:16 PM #13 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 12:43,792 (763792ms) -> OK
4:35:16 PM #14 Text 0 File DVDR.cpp, Line 1623
Recording mode: Sequential Recording Mode
4:35:16 PM #15 Text 0 File Mmc.cpp, Line 19874
Set BUFE: supported -> ON
4:35:17 PM #16 Text 0 File DVDR.cpp, Line 1764
Start write address at LBA 0
DVD high compatibility mode: Yes
4:35:17 PM #17 Text 0 File Cdrdrv.cpp, Line 8002
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
4:35:34 PM #18 SCSI -500 File Cdrdrv.cpp, Line 1437
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03870000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
4:35:34 PM #19 CDR -500 File Writer.cpp, Line 304
SCSI command aborted
HL-DT-ST DVDRAM GSA-4120B\H2 T0
4:35:34 PM #20 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
4:35:34 PM #21 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
4:35:35 PM #22 Text 0 File DVDR.cpp, Line 1974
EndDAO: Last written address was -1
4:36:16 PM #23 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
4:36:16 PM #24 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
4:36:16 PM #25 Phase 67 File dlgbrnst.cpp, Line 1841
Burn process failed
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 5:07:32 PM
File 'Drivers\Tpp200.sys': Ver=5.04.1150.0 , size=35541 bytes, created 05/10/2001 11:54:28 AM
File 'Drivers\Tpp300.sys': Ver=5.04.1150.0 , size=33669 bytes, created 05/10/2001 11:54:28 AM
File 'Drivers\Tpp725.sys': Ver=5.04.1150.0 , size=43269 bytes, created 05/10/2001 11:54:28 AM
File 'Drivers\InCDfs.SYS': Ver=4, 2, 4, 1, size=89472 bytes, created 06/04/2004 7:39:20 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 4, 1, size=25600 bytes, created 06/04/2004 7:40:10 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 4, 1, size=5504 bytes, created 06/04/2004 7:43:22 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 2:27:50 AM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
ccampbell
Senior Member
|
6. October 2004 @ 08:37 |
Link to this message
|
Hi Chynk,
For USB Recorders, I have Plextor, Memorex, Lite-ON, and Pioneer here in the lab. All work fine with Nero 6.3.1.25 on various systems and operating systems that I have tested on. Regardless of the media used.
When you say it fails with CD-Speed testing DVD-R media, what test exactly are you running? Did you use the Create Data Disc option with DVD-R media?
Poor cabling could cause the power Reset issue, and possible problems with the Nero software, but thats a long shot. As for drivers for your USB controller, that is always a possibility. If this were my system, based on what you've done so far to resolve the issue, I would next test to see if the USB controller is the issue. The Good thing about stores like 'Fry's Electronics' is that you can purchase hardware like a USB add-on Controller, test to see if it resolves your issue, and if not return the product in 15 days. :-)
And Jphilipgr,
You should upgrade your Nero software to the latest Nero 6.3.1.25 and make sure you have the latest firmware for your recorder and see if this resolves your issue first.
Regards,
Craig
Ahead Software
USA
|
|
chynk
Newbie
|
6. October 2004 @ 08:54 |
Link to this message
|
|
@ccampbell
start/programs/nero/nero toolkit/nero cd-dvd speed
i just inserted a dvd-r into my iomega external drive and click start. i notice that under "run test", all are selected so i assume it runs the tests in sequential order. hence, the transfer rate test would be first.
when i burn a dvd-r, ive tried using the create data disc and burn image options... both dont work. however, when i use a dvd-rw, they both work.
for my usb controller, you would recommend me buying the usb controller test? wat exactly is that?
i run a 60gb external hdd from my laptop which i know is usb2. ive never had issues with transfering data back n forth using all 3 of my usb2 ports on my laptop. again, ive used this exact same laptop to burn dvds with the exact same model burner. im seriously lost n gettin frustrated at my burner.
Craig, is there another way we can communicate on this issue? my hdd only has 4.7gb free n im leaving that so i can backup the rest of my data!!! im in need of this to work! sorry if im bitchin, just frustrated : (
|
|
ccampbell
Senior Member
|
6. October 2004 @ 09:04 |
Link to this message
|
|
HI Chynk,
You can contact me directly at techsupport4@nero.com
The test with a new USB2 controller means you would need to go to a store, preferably one like Fry's Electronics that allow returns if it does not address your issue, and purchase a USB2 PCMCIA controller that you can add to your Laptop. Just to see if the issue is Controller related. This does not mean the controller is the issue, just that it could be, even though other operations are not affected.
My problem is that I am not able to duplicate this issue with any of our USB Recorders in our lab. I've tested laptops and desktop computers. And I do not see any obvious issues with your system or the drivers on your system.
Regards,
Craig
Ahead Software
USA
|
|
jphilipgr
Newbie
|
7. October 2004 @ 06:31 |
Link to this message
|
|
hello craig,
i tried both of your suggestions without any help.
i also used new driver from the external case manufacturer. but nothing seems to clear the problem.
|
|
JohnnyDon
Suspended due to non-functional email address
|
7. October 2004 @ 10:44 |
Link to this message
|
|
Hello,
I have been following this thread and having the same problem. Any help would be greatly appreciated.
JD
|
Moderator
|
7. October 2004 @ 11:48 |
Link to this message
|
|
JohnnyDon
If you need help then you ned to provide as much information as possible. "I have the same problem" doesn't give us much to go on :)
My killer sig came courtesy of bb "El Jefe" mayo.
The Forum Rules You Agreed To! http://forums.afterdawn.com/thread_view.cfm/2487
"And there we saw the giants, and we were in our own sight as grasshoppers, and so we were in their sight" - Numbers 13:33 |
|
JohnnyDon
Suspended due to non-functional email address
|
7. October 2004 @ 16:18 |
Link to this message
|
Thanks for the nudge Nephilim, I have not installed SP2 either. Here is my log file from Nero 6.3.1.25.
Any help is much appreciated...
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 5/6/2002 11:01:14 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
Nero version: 6.3.1.25
Recorder: <LITE-ON DVDRW LDW-851S> Version: GS0C - HA 2 TA 0 - 6.3.1.25
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON LTR-52327S >Version: QS0B - HA 1 TA 0 - 6.3.1.25
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST380011A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-52327S atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
LITE-ON LTR-52327S G: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 38797312 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 239MB (245232kB)
Free physical memory: 63MB (64972kB)
Memory in use : 73 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
5.10.2004
UDF/ISO compilation
9:19:06 PM #1 Phase 112 File dlgbrnst.cpp, Line 1855
DVD-Video files reallocation started
9:19:06 PM #2 Phase 114 File dlgbrnst.cpp, Line 1855
DVD-Video files reallocation completed (no file modified)
9:19:06 PM #3 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
9:19:07 PM #4 Phase 111 File dlgbrnst.cpp, Line 1855
DVD-Video files sorted
9:19:07 PM #5 Text 0 File Reader.cpp, Line 126
Reader running
9:19:07 PM #6 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW LDW-851S running
9:19:07 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
9:19:07 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
9:19:07 PM #9 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using DVD media
9:19:07 PM #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1923039 (427:20.39, 3755MB)
9:19:07 PM #11 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD DVD)
9:19:07 PM #12 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: LITE-ON DVDRW LDW-851S, Media type: DVD-R
Disc Manufacturer: RITEKG - 03
Disc Application Code: 64, Disc Physical Code: 193
9:19:07 PM #13 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:19:07 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1923040 (1923040) = #1923040/427:20.40
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1923040 blocks [LITE-ON DVDRW LDW-851S ]
--------------------------------------------------------------
9:19:07 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [LITE-ON DVDRW LDW-851S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3938385920, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1923040 | lead-out | 1 | 0x00 | 0x41
9:19:08 PM #16 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started
9:19:08 PM #17 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.
9:19:08 PM #18 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed
9:19:08 PM #19 Phase 32 File dlgbrnst.cpp, Line 1855
Simulation started at 2x (2,770 KB/s)
9:19:08 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:19:08 PM #21 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 23:53,401 (1433401ms) -> OK
9:19:08 PM #22 Text 0 File DVDR.cpp, Line 2000
Recording mode: Sequential Recording Mode
9:19:08 PM #23 Text 0 File Mmc.cpp, Line 20660
Set BUFE: supported -> ON , SMART-BURN : OFF
9:19:08 PM #24 Text 0 File DVDR.cpp, Line 2141
Start write address at LBA 0
DVD high compatibility mode: Yes
9:19:08 PM #25 Text 0 File Cdrdrv.cpp, Line 8230
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
9:19:11 PM #26 Text 0 File Cdrdrv.cpp, Line 1297
21:19:11.406 - LITE-ON DVDRW LDW-851S\H2 T0 : Queue again later
9:19:12 PM #27 SCSI -500 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x06314000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
9:19:12 PM #28 SCSI -1114 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x05C80000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x29 0x00
9:19:12 PM #29 CDR -500 File Writer.cpp, Line 304
SCSI command aborted
LITE-ON DVDRW LDW-851S\H2 T0
9:19:12 PM #30 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
9:19:12 PM #31 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
9:19:12 PM #32 Text 0 File DVDR.cpp, Line 2383
EndDAO: Last written address was 31
9:19:19 PM #33 SCSI -500 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
9:19:21 PM #34 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
9:19:22 PM #35 CDR -500 File WriterStatus.cpp, Line 164
SCSI command aborted
LITE-ON DVDRW LDW-851S\H2 T0
9:19:22 PM #36 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once
9:19:23 PM #37 Phase 40 File dlgbrnst.cpp, Line 1550
Aborted by user
9:19:23 PM #38 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
9:19:23 PM #39 CDR -600 File WriterStatus.cpp, Line 169
Device not available
LITE-ON DVDRW LDW-851S\H2 T0
9:19:23 PM #40 TRANSFER -39 File WriterStatus.cpp, Line 169
Could not perform EndSession
9:19:23 PM #41 Phase 35 File dlgbrnst.cpp, Line 1855
Simulation aborted
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 5/6/2002 11:01:08 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 3/31/2003 12:00:00 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
cyanescen
Newbie
|
7. October 2004 @ 16:37 |
Link to this message
|
I dont know if it helps anybody but I had all the same problems and it wasn't remedied until I reformatted and downloaded the older version of shrink 3.17 and reloading my Nero OEM and everything works perfect. I have yet to reinstall the new veresion of shrink because it caused problems last time and everything works fine now. Good luck!!!
|
|
Bomfunk
Newbie
|
7. October 2004 @ 20:10 |
Link to this message
|
Hello,
I use a Pioneer DVR107D in a Loadstar USB2 case and have the exact same problems with the SCSI aborted command. I tried the drive both on my PC and my laptop (WinXP SP1/SP2) with Nero and I get the same error message. The Laptop uses a PCMCIA USB2 card, my PC has USB2 onboard, so that should rule out any hardware USB2 issues regarding the PC. I use the latest Nero version and have the latest firmware for my burner too (1.20) Here is my error log:
Quote:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programme\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22.07.2004 17:33:44
Nero Version: 6.3.1.25
Recorder: <PIONEER DVD-RW DVR-107D>Version: 1.20 - HA 1 TA 0 - 6.3.1.25
Adapter driver: <> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SONY DVD-ROM DDU1621 >Version: S3.5 - HA 0 TA 2 - 6.3.1.25
Adapter driver: <nvatabus> HA 0
=== Scsi-Device-Map ===
DiskPeripheral : IBM-DJNA-371800 nvatabus Port 0 ID 0 DMA: Off
CdRomPeripheral : SONY DVD-ROM DDU1621 nvatabus Port 0 ID 2 DMA: Off
DiskPeripheral : FUJITSU MPC3064AT nvatabus Port 0 ID 3 DMA: Off
=== CDRom-Device-Map ===
SONY DVD-ROM DDU1621 G: CDRom0
PIONEER DVD-RW DVR-107D H: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 144MB (147628kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.10.2004
ISO Zusammenstellung
12:02:46 #1 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Continue multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
12:02:46 #2 Text 0 File Reader.cpp, Line 126
Reader running
12:02:46 #3 Text 0 File Writer.cpp, Line 124
Writer PIONEER DVD-RW DVR-107D running
12:02:46 #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
12:02:46 #5 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-Once, using DVD media
12:02:47 #6 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 459475 (102:06.25, 897MB)
12:02:47 #7 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
12:02:47 #8 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: PIONEER DVD-RW DVR-107D, Media type: DVD+RW
Disc Manufacturer ID: MCC, Media Type ID: A01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 0
12:02:47 #9 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:02:47 #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 411456 (411456) = #411456/91:26.6
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 411456 blocks [PIONEER DVD-RW DVR-107D]
1: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (0) not provided
original disc pos #15 + 4 (4) = #19/0:0.19
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4 blocks [PIONEER DVD-RW DVR-107D]
--------------------------------------------------------------
12:02:47 #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [PIONEER DVD-RW DVR-107D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 2 to 3:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 842661888, ISRC ""
2: TRM_DATA_MODE1, 2048/0x00, FilePos 842661888 842661888 842670080, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
48016 | lead-in | 0 | 0x00 | 0x41
48016 | 2 | 0 | 0x00 | 0x41
48016 | 2 | 1 | 0x00 | 0x41
459472 | 3 | 0 | 0x00 | 0x41
459472 | 3 | 1 | 0x00 | 0x41
459476 | lead-out | 1 | 0x00 | 0x41
12:02:48 #12 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started
12:02:48 #13 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.
12:02:48 #14 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed
12:02:48 #15 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 2,4x (3.324 KB/s)
12:02:48 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #48016
12:02:48 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #15): write at #15
12:02:48 #18 Text 0 File Cdrdrv.cpp, Line 8230
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: MCC.....
Media type ID: A01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 00 4D 43 43 00 00 - 00 00 00 41 30 31 00 39 ...MCC.....A01.9
23 02 84 78 68 02 1D 02 - 92 78 68 02 1B 02 8A 78 #..xh....xh....x
68 02 1C 22 13 00 E0 10 - 00 00 00 00 00 00 00 00 h.."............
12:02:48 #19 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 5:37,880 (337880ms) -> OK
12:02:48 #20 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 48016
DVD high compatibility mode: Yes
12:02:57 #21 Text 0 File Cdrdrv.cpp, Line 1297
12:02:57.734 - PIONEER DVD-RW DVR-107D\H1 T0 : Queue again later
12:03:02 #22 SCSI -500 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x036B0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0xBE 0x90 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
12:03:02 #23 CDR -500 File Writer.cpp, Line 304
SCSI command aborted
PIONEER DVD-RW DVR-107D\H1 T0
12:03:02 #24 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
12:03:02 #25 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
12:03:12 #26 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
12:03:12 #27 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
12:03:12 #28 Phase 38 File dlgbrnst.cpp, Line 1855
Burn process failed at 2,4x (3.324 KB/s)
Existing drivers:
File 'Drivers\nvatabus.sys': Ver=5.10.2600.0446 built by: WinDDK, size=79360 bytes, created 03.06.2004 10:40:46 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
[/quote}
I am not able to do a simulation unfortunately, at least this is what Nero tells me when I check the box
Thanks a lot in advance
Bomfunk
|
|
Advertisement
|
|
|
|
qix
Newbie
|
8. October 2004 @ 12:54 |
Link to this message
|
what are they smoking in Redmond?
my external pioneer 107d also had the same scsi abort
error failure message problem
my generic USB2 card has the VIA VT6202 chip
and was immediately recognized by the XP SP1
and given
USB Mass Storage Device
Via USB Enhanced Host Controller
all with Microsoft drivers
after installing the drivers from the update/upscale
i now have
the same USB Mass Storage Device
USB 2.0 Root Hub Device
Via USB 2.0 Enhanced Host Controller
check out the viausbv202 file
there's also the filters file
which i didn't even have to bother with
both are totally un-installable
[http://]
www.epox.nl/english/support/drivers/via.htm
i am using a combo box for testing
my cdrw test file 694 MB on Princo 10x
burn data verify
usb2 8'35" 3'43"
firewire 8'34" 3'30"
oh yeah, i ran diagnostics on Nero 5.5100 upto and including 63125
and all the versions of wnaspi32.dll
it's not the software - it's the nightmare
|
|
