|
Tutorial - Make Your Nintendo Wifi USB Connector A SoftAP
|
|
|
saint101
Junior Member
|
7. February 2009 @ 10:50 |
Link to this message
|
Originally posted by wifiluvr:
Whenever I try to open the asus program it says there is no wireless lan card inserted, the utility will open when the card is inserted. The usb adapter with the modded buffalo drivers are installed is plugged in. What should I do?
the only thing i have to suggest is follow the video posted earlier in the thread and make sure you follow it exactally, other than that i never came across that problem so im not 100% sure how to fix it
|
|
Advertisement
|
|
|
|
|
LucasBlat
Newbie
|
7. February 2009 @ 17:38 |
Link to this message
|
Originally posted by saint101:
Originally posted by LucasBlat:
Originally posted by saint101:
i think i can see what the problem is. click on the other area connection, the active one and check to make sure that connection is being shared. the nintendo one looks fine as im aware
i need to choose between conexao local or nintendo adapter conncetion to set as shared...
i can set only one as shared... and then i choosed the area connection... its now being shared, but the nintendo one not
set the conexao local as shared and nintendo adapter as not being shared and try to see if the wii will connect to the net now
i tryed... and nothing... i think theres installed buffalo drivers, and nintendo is using the buffalo driver, or something like this...
because that problem started after the buffalo installation...
is there a way to delete ALL the drivers?
or the problem is of the dns or something like that...
|
|
LucasBlat
Newbie
|
7. February 2009 @ 17:56 |
Link to this message
|
|
MAAAAAN !!! I DID IT!
IM SO FUC***G HAPPY NOW!
i just deleted the rt2500usb.sys file, and reinstalled the drivers...
=DDD
thanks you anyway man!
|
|
saint101
Junior Member
|
7. February 2009 @ 21:41 |
Link to this message
|
|
no problem although i didnt have the idea for it lol :P glad to see you got it working
|
|
seth_mjH
Inactive
|
8. February 2009 @ 10:40 |
Link to this message
|
I got my psp to pick up the signal it says 100% signal strength then when i connect it says connection could not be established, i still left it named nintendo wifi connector and not Buffalo connector thingy and it works, but could that effect it, anyone with any info would be appreciated, these are my settings: nintendo wifi connector:
Let others connect to internet through this connection(don't know if thats suppose to be for this connection or other 1)
IP:192 168 0 1
Subnet: 255 255 255 0
nothing on the rest of the settings
Local area connection 18:
IP: 192 168 0 2
Subnet:255 255 255 0
PSP:
IP: 192 168 0 4
Subnet: 255 255 255 0
Default: 192 168 0 5
primary:192 168 0 5
Secondary:0 0 0 0
Proxy server: do not use
Internet browser: do not start
Wlan card:
SSID: does not hide: Seth
Channel:6,and 1,2,3,4,5,11 ive tried
Encryption:authentication:open
encrytion:disabled
Soft AP: soft AP mode
Internet local area connection 18 (not sure what to do here)
enable ics
Access control:
Policy: accept
and i added my mac address
Almost fixed it, under advanced setting it is supposed to be 802.11bonly every time i click it and click ok it goes back 54g can some one help PLZZZZZZZZZZZ
This message has been edited since posting. Last time this message was edited on 8. February 2009 @ 18:46
|
|
saint101
Junior Member
|
9. February 2009 @ 04:21 |
Link to this message
|
|
tried changing network authentication to shared or open?
|
|
seth_mjH
Inactive
|
9. February 2009 @ 15:41 |
Link to this message
|
|
yea i did, its sending but not receiving i think i went through every page some other people had this problem but it did not say how they fixed it. if theres any other suggestions ill try them
This message has been edited since posting. Last time this message was edited on 9. February 2009 @ 15:45
|
|
darklinkq
Newbie
|
11. February 2009 @ 15:09 |
Link to this message
|
|
I get the "Unable to connect to the wireless lan card. The tray icon will be loaded once the card is inserted."
Is there something I'm missing somewhere?....I followed the steps...and well they get me here...
Note: This is on the Run The Control Center part right after selecting the second option
This message has been edited since posting. Last time this message was edited on 11. February 2009 @ 15:09
|
|
seth_mjH
Inactive
|
11. February 2009 @ 16:06 |
Link to this message
|
solution1:are you sure you uninstalled all of the drivers for nintendo with the disk?
solution 2:I had this problem, so i went back and downloaded all the software and started from the beginning, i found out i was missing 1 part of the step, it is key you do all of the steps in order try using the video.
if your sure you did it right then ill give you other suggestions
|
|
darklinkq
Newbie
|
11. February 2009 @ 16:25 |
Link to this message
|
|
Seems right clicking the file in the driver and clicking install...doesn't quite work for install....seems to be working now though yay
|
|
seth_mjH
Inactive
|
11. February 2009 @ 16:29 |
Link to this message
|
|
k good,if you have any other questions ill try to answer, because mine wasnt working and i just got it working, i think i read every pg trying to make it work lol
This message has been edited since posting. Last time this message was edited on 11. February 2009 @ 16:30
|
|
darklinkq
Newbie
|
11. February 2009 @ 17:20 |
Link to this message
|
|
Well....does anyone know if it is possible to use Xlink Kai with this? And if so....how do you set it up to work with it?
|
|
manuel510
Newbie
|
14. February 2009 @ 17:42 |
Link to this message
|
|
|
|
saint101
Junior Member
|
15. February 2009 @ 04:43 |
Link to this message
|
|
|
|
manuel510
Newbie
|
16. February 2009 @ 01:02 |
Link to this message
|
alrite i jus wanted to make sure since im planin on buyin it this week since its 100$ but if someone could try it out and tell me dat would be great. and also does it support 54g? because that is the current setting i have it on and it looks like 360 take 802.11 but if i switch to 802.11 can my psp and wii still be connected?
This message has been edited since posting. Last time this message was edited on 16. February 2009 @ 01:10
|
|
manuel510
Newbie
|
16. February 2009 @ 01:23 |
Link to this message
|
how do i set up a wep key??
|
|
frowny1
Newbie
|
19. February 2009 @ 08:26 |
Link to this message
|
|
When I try to Install the drivers it says
The Arcive is either in unknown format or damaged
what am I doing wrong?
|
|
frowny1
Newbie
|
19. February 2009 @ 10:10 |
Link to this message
|
It says It is unable to connect to the wireless lan thingy when i click on the ASUS control center?
Do I need a Wireless LAN Card?
|
|
petspaps
Newbie
|
25. March 2009 @ 05:40 |
Link to this message
|
can u use this for a laptop with 802.11 g connection, so ud be using the usb from a desktop and sending it to and laptop.
|
|
gregpars1
Newbie
|
27. March 2009 @ 14:21 |
Link to this message
|
|
well, i got it to work after reformatting and reinstalling windows, but now after using it for about 15 minutes it gets realllly hot and stops working. is there something that I can do to make it work for more than 15 minutes? if I leave it plugged in for like 24 hours, it starts smoking.
Gregparsons
|
|
gregpars1
Newbie
|
27. March 2009 @ 14:29 |
Link to this message
|
well, after thinking a little bit, i decided to use an usb extension cable and put it in my mini-fridge. now it seems to work fine and doesn't get hot. but i did lose a lot of signal strength though. :-). do you think that it is harmful for it to be in such a cold environment?
|
|
zach925
Newbie
|
29. March 2009 @ 04:41 |
Link to this message
|
Hi everyone I am running a Vista so everything goes smooth sailing until I install the Asus Wlan control center which by checking its compatibility is only for Windows XP. Because of that I cant pass step 4. (Then click Start -> All Programs -> ASUS Utility -> WLAN Card -> ASUS WLAN Control Center.) if I were to try and run it i would get a "The application failed to initialize properly (0xc0000005). Click on OK to terminate the application. "
So is there a way people running Vista can do this???
HELP PLEASE
|
|
Jehanne
Newbie
|
17. April 2009 @ 12:13 |
Link to this message
|
I am also running Vista and am getting the *exact* same error. It would be great to get this hack running on Vista, as the Nintendo Wi-Fi program is full of bugs -- it works for my two Wiis but will not work for my DS. I do not want to switch my router from WPA2/AES back to WEP, as my neighbors (no kidding) are trying to hack into my router!
|
|
Mysterio1
Newbie
|
20. April 2009 @ 03:38 |
Link to this message
|
Thnx a lot dude!!! u saved me about $50 now i can use the internet on my Wii and PSP (y) :)
Kev.
|
|
Advertisement
|
|
|
|
xDxDxD
Newbie
|
1. May 2009 @ 09:56 |
Link to this message
|
hi evryone!!
i'm from ausria so i'm sorry for may bad englich xD
i got a problem
if i untick enable ics, there is an error : curently, internet connection sharing is enabled. But "drahtlose Netzwerkverbindun (in englsch wireless lan) Buffalo Wli-u2-kg54-yb wireless adapter is not in home network. Please modify the settings.
What shuld i do??
If its possible, pls write in a step by step instruction.
Thank you for your attention
lol
|
