|
Dbox In Ireland
|
|
Junior Member
|
20. April 2008 @ 14:53 |
Link to this message
|
Originally posted by ruprect:
N 5401 00 18777FAFBFA11F77 ;ROM7 AU Key Time Sun Apr 20 17:51:34 2008
N 5401 01 D1641ADC40721E49 ;ROM7 AU Key Time Sun Apr 20 17:47:53 2008
N*L dub. rolled again
If you have the new nagra roms loaded you shouldn't have to bother messin around with keys it does it for ya my box is updating fine since last monday
all the settings/roms for the nokia d box in dublin are on the bigmaq toolbar give it a lash, my box is running in south dublin and the settings are as follows
#1 active soft cam = evocamd
#2 active u code = 14
#3 nagra rom 7, 11, 10 active (3) off
#4 press the blue button go to tuxbox commander in the var/keys folder look for camd_conf and press no.4 this is the edit button in here scroll down to AU and put it into (02) mode auto. go down to keys and put this at (02) these might be already done but no harm ....press home and save when prompted then reboot and see how ya go
these are the only changes i've done to my nokia and i have no hassle the rom is updating on a roll and i have all chanels if you manage to do a service scan while your box is down remember that your cables.xml service.xml and bouquets.xml are deleted this is a common problem and lots of people are not picking up anything because these settings are not there so don't service scan best of luck :):):):)
|
|
Advertisement
|
|
|
|
|
nokiadbox
Suspended due to non-functional email address
|
20. April 2008 @ 15:00 |
Link to this message
|
Hi Guys I'm sorry if the answer to this in earlier pages I am so confused.
I have uploaded the new nagrarom7 to my nokia dbox.
Unfortunately I am not getting the stations I have lost back, any ideas?
I have also entered the codes for the 20th manually and again not getting lost stations.
Your help would we appreciated, by the I'm only average with all this stuff!
|
|
ruprect
Senior Member
|
20. April 2008 @ 15:19 |
Link to this message
|
Originally posted by nokiadbox:
Hi Guys I'm sorry if the answer to this in earlier pages I am so confused.
I have uploaded the new nagrarom7 to my nokia dbox.
Unfortunately I am not getting the stations I have lost back, any ideas?
I have also entered the codes for the 20th manually and again not getting lost stations.
Your help would we appreciated, by the I'm only average with all this stuff!
Can be one of MANY things. evocam not turned on, autoupdate off, you didnt unzip/unrar the file. you have nagra 7 off. too many variables. it might be easier to just get a working dublin image.
|
|
nokiadbox
Suspended due to non-functional email address
|
20. April 2008 @ 15:25 |
Link to this message
|
Originally posted by ruprect:
Originally posted by nokiadbox:
Hi Guys I'm sorry if the answer to this in earlier pages I am so confused.
I have uploaded the new nagrarom7 to my nokia dbox.
Unfortunately I am not getting the stations I have lost back, any ideas?
I have also entered the codes for the 20th manually and again not getting lost stations.
Your help would we appreciated, by the I'm only average with all this stuff!
Can be one of MANY things. evocam not turned on, autoupdate off, you didnt unzip/unrar the file. you have nagra 7 off. too many variables. it might be easier to just get a working dublin image.
Thanks for coming back to me, I took a chance and went into blue button sportster and emu selection and evocamd and I am back in business!!
Have I done enough for everything to stay working forgive my ignorance here, but I feel I am nearly there?
|
|
ruprect
Senior Member
|
20. April 2008 @ 15:35 |
Link to this message
|
|
Yes you should be fine now. THe autoroll works only with evocam at the moment. If you are happy with sportster stick with it, Andromeda is very nice though, but if it ain't broken (any more) no need to fix it.
Andromeda has gbox features. People with chirpy sagems should get a FULLY updated andromeda 2.0, with the 5 new files needed. This can transfer keys to gbox.
|
|
jock54
Junior Member
|
20. April 2008 @ 16:32 |
Link to this message
|
Someone might be able to help me out here, i tried installing the rom 7 fix today on dreambox 600 transferred ok and replaced the original. I got all channels working for about a minute and then it froze. Hooked it back up to FlashFxp and read the keylist and it was one digit out put in right keys saved it. Connected back up to tv and worked again for about another minute and froze again. Is there something i'm doing wrong. Thanks
|
|
ruprect
Senior Member
|
20. April 2008 @ 16:34 |
Link to this message
|
Originally posted by jock54:
Someone might be able to help me out here, i tried installing the rom 7 fix today on dreambox 600 transferred ok and replaced the original. I got all channels working for about a minute and then it froze. Hooked it back up to FlashFxp and read the keylist and it was one digit out put in right keys saved it. Connected back up to tv and worked again for about another minute and froze again. Is there something i'm doing wrong. Thanks
Put it on evocam. Have you only rom 7 enabled? if not try it.
|
|
Gaurav81
Account closed as per user's own request
|
20. April 2008 @ 16:38 |
Link to this message
|
Hi all hope you can help me. like all of you I also lost my channels when the keys began jumping. I have now just flashed Blade Trinty Final across to my 2X Nokia Dbox using IFA however am still not picking up any channels.
When scanning I search for all UK channels and a message pops up saying no channels (or transponders) found. I live in Barking (England) so changed my Freq to 666750 and NetID to 41050 which did not fix it.
Could anyone please tell me what I am doing wrong
Thanks.
|
Junior Member
|
20. April 2008 @ 16:48 |
Link to this message
|
Originally posted by Gaurav81:
Hi all hope you can help me. like all of you I also lost my channels when the keys began jumping. I have now just flashed Blade Trinty Final across to my 2X Nokia Dbox using IFA however am still not picking up any channels.
When scanning I search for all UK channels and a message pops up saying no channels (or transponders) found. I live in Barking (England) so changed my Freq to 666750 and NetID to 41050 which did not fix it.
Could anyone please tell me what I am doing wrong
Scanning is the worst thing you can do as your deleting any existing service/cable.xmls load up the xml's for your area from the forum or bigmaq and reboot using evocam (softcam)and the new nag 7
|
|
Dsleeper
Member
|
20. April 2008 @ 16:52 |
Link to this message
|
Originally posted by Scoopdog:
Originally posted by Gaurav81:
Hi all hope you can help me. like all of you I also lost my channels when the keys began jumping. I have now just flashed Blade Trinty Final across to my 2X Nokia Dbox using IFA however am still not picking up any channels.
When scanning I search for all UK channels and a message pops up saying no channels (or transponders) found. I live in Barking (England) so changed my Freq to 666750 and NetID to 41050 which did not fix it.
Could anyone please tell me what I am doing wrong
Scanning is the worst thing you can do as your deleting any existing service/cable.xmls load up the xml's for your area from the forum or bigmaq and reboot using evocam (softcam)and the new nag 7
Start at page 1. all of your questions have been answered.. people that know will abandon soon. It's a forum not a chat room
|
|
jock54
Junior Member
|
20. April 2008 @ 17:00 |
Link to this message
|
|
I have it on evocam going to check now to make sure rom 7 enabled.
Thanks ruprect
|
|
smuddy08
Newbie
|
20. April 2008 @ 18:16 |
Link to this message
|
evening beautiful people. Can someone tell me how to get this auto thing going so i can stop annoying ya all. I have downloaded the commano file thingy. i have a sagem dbox.
much thanks in advance
|
Member
|
20. April 2008 @ 18:49 |
Link to this message
|
Originally posted by jock54:
Someone might be able to help me out here, i tried installing the rom 7 fix today on dreambox 600 transferred ok and replaced the original. I got all channels working for about a minute and then it froze. Hooked it back up to FlashFxp and read the keylist and it was one digit out put in right keys saved it. Connected back up to tv and worked again for about another minute and froze again. Is there something i'm doing wrong. Thanks
U need to set AU to 01 and insure that u have the latest romfix....
Al
|
|
ForzaIRL
Newbie
|
20. April 2008 @ 19:06 |
Link to this message
|
hi sorry if this q has been answered a million times already in this thread bt theres a lot of pages to read.....
my digivox has bin dwn since last week and isnt picking up new codes by its self its driving me mad....
any helpd be great its dublin area en-tee-ell* (*dnt no what the rules about names are here im only new so sound it out)
|
|
jock54
Junior Member
|
21. April 2008 @ 04:59 |
Link to this message
|
Originally posted by alanbk1:
Originally posted by jock54:
Someone might be able to help me out here, i tried installing the rom 7 fix today on dreambox 600 transferred ok and replaced the original. I got all channels working for about a minute and then it froze. Hooked it back up to FlashFxp and read the keylist and it was one digit out put in right keys saved it. Connected back up to tv and worked again for about another minute and froze again. Is there something i'm doing wrong. Thanks
U need to set AU to 01 and insure that u have the latest romfix....
|
|
jock54
Junior Member
|
21. April 2008 @ 05:15 |
Link to this message
|
Alan, bit confused as i have never done this before . how do i set AU to 01, can i do that with the remote or when im in FlashFxp I think maybe im supposed to have only rom7,11,and 10 active and not have 3 off, i'm not even sure how to activate or deactivate. I'm enjoying the challange in one since but doing my head in another.
Thanks .
|
Senior Member
2 product reviews
|
21. April 2008 @ 06:34 |
Link to this message
|
Originally posted by jock54:
Alan, bit confused as i have never done this before . how do i set AU to 01, can i do that with the remote or when im in FlashFxp I think maybe im supposed to have only rom7,11,and 10 active and not have 3 off, i'm not even sure how to activate or deactivate. I'm enjoying the challange in one since but doing my head in another.
Thanks .
press blue
pick tuxbox commander
navigate var\keys and press 4 on camd_cfg
go to au and setr it to 1
|
|
jock54
Junior Member
|
21. April 2008 @ 07:08 |
Link to this message
|
Thank steo2k8 not too sure if tuxbox commander in on the 600 maybe it is and havent seen it. I will have a try this evening after work. How do i activate/ deactivate the roms.
Thanks
|
|
NUKEMALL
Newbie
|
21. April 2008 @ 08:28 |
Link to this message
|
have noticed that there are fixes for nagrarom 7 ,10 and 11 can these be copied to a box by drag and drop or do you have to flash with a ftp program ?? .
i need to update my mates sagem dbox but last time i tried on my old box it never worked again lol .
|
|
B33RMAN
Newbie
|
21. April 2008 @ 10:12 |
Link to this message
|
I've been having similar problems to jock54
I installed the rom 7 fix today, I got all channels working for about a minute and then it froze. So taking reprect's advice I put it on evocamd, disabled all Roms except 7 [Roms 3,10,11 are disabled], this solved the problems with the channels freezing, so now I have all channels back, but I've lost EPG, keep getting "-No EPG Info-" on the LCD and either "waiting for EPG..." or "no epg found" on the info screen.
Is it possible the EPG was coming in through Rom 10/11?
Have read that there is a fix for these Roms somewhere but have been unable to find it, If someone would post a link for the fixed Roms 10 and 11 I could check to see if this is my problem.
Thanks guys
|
|
jock54
Junior Member
|
21. April 2008 @ 10:36 |
Link to this message
|
Hi B33RMAN,, When i downloaded the rom7 fix their were 3 files in it called all rom fix 7,10,and 11, now i don't know if the 10 and 11 are different to the ones you have already or are they a fix also.I just uploaded the rom7.Not too sure either if 10 and 11 are needed for the epg info.Can you tell me how do i disable roms 3,10,11. and when you say you put the 7fix into evocamd, i,m not too sure how to do that either. Bloody frustrating but determined to get the better of it.The three files are in the BigMaq toolbar in Cable Files...
|
|
NUKEMALL
Newbie
|
21. April 2008 @ 13:09 |
Link to this message
|
Originally posted by jock54:
Hi B33RMAN,, When i downloaded the rom7 fix their were 3 files in it called all rom fix 7,10,and 11, now i don't know if the 10 and 11 are different to the ones you have already or are they a fix also.I just uploaded the rom7.Not too sure either if 10 and 11 are needed for the epg info.Can you tell me how do i disable roms 3,10,11. and when you say you put the 7fix into evocamd, i,m not too sure how to do that either. Bloody frustrating but determined to get the better of it.The three files are in the BigMaq toolbar in Cable Files...
to disable the roms just press the ok button on them and they change to disable and same again to enable .
then deleat all keys from apart from the rom7 that is what i did when the boxes went t*ts up 2 weeks ago .
still need to know if i can just copy the fixes over by networking the dbox or do i need a ftp program ???
|
|
ruprect
Senior Member
|
21. April 2008 @ 14:40 |
Link to this message
|
Originally posted by jock54:
Thank steo2k8 not too sure if tuxbox commander in on the 600 maybe it is and havent seen it. I will have a try this evening after work. How do i activate/ deactivate the roms.
Thanks
It might be called tuxcom on a dreambox. It might be found pressing the blue or the yellow button, all depends on the images. Or go to var/keys download the file alter it and stick it on again.
|
|
ruprect
Senior Member
|
21. April 2008 @ 14:45 |
Link to this message
|
Originally posted by jock54:
Hi B33RMAN,, When i downloaded the rom7 fix their were 3 files in it called all rom fix 7,10,and 11,
The files should be called nagrarom7.bin, nagrarom10.bin, nagrarom11.bin
Note the .bin at the end, some people are putting .zip or .rar compressed files on, which will not work.
Quote:
I installed the rom 7 fix today, I got all channels working for about a minute and then it froze. So taking reprect's advice I put it on evocamd, disabled all Roms except 7 [Roms 3,10,11 are disabled], this solved the problems with the channels freezing, so now I have all channels back, but I've lost EPG, keep getting "-No EPG Info-" on the LCD and either "waiting for EPG..." or "no epg found" on the info screen.
Is it possible the EPG was coming in through Rom 10/11?
No EPG is a common bug on blade, I have seen it on andromeda too. Press blue and it might say "Read EPG off", turn this to on. If it will not come on doing that reboot., nothing to do with 10/11
|
|
Advertisement
|
|
|
Junior Member
|
22. April 2008 @ 02:48 |
Link to this message
|
Originally posted by ruprect:
Originally posted by jock54:
Hi B33RMAN,, When i downloaded the rom7 fix their were 3 files in it called all rom fix 7,10,and 11,
The files should be called nagrarom7.bin, nagrarom10.bin, nagrarom11.bin
Note the .bin at the end, some people are putting .zip or .rar compressed files on, which will not work.
Quote:
I installed the rom 7 fix today, I got all channels working for about a minute and then it froze. So taking reprect's advice I put it on evocamd, disabled all Roms except 7 [Roms 3,10,11 are disabled], this solved the problems with the channels freezing, so now I have all channels back, but I've lost EPG, keep getting "-No EPG Info-" on the LCD and either "waiting for EPG..." or "no epg found" on the info screen.
Is it possible the EPG was coming in through Rom 10/11?
No EPG is a common bug on blade, I have seen it on andromeda too. Press blue and it might say "Read EPG off", turn this to on. If it will not come on doing that reboot., nothing to do with 10/11
as rup pointed out on blade and other images you have the option of disabling epg as this can freeze some boxes not all ,another way to stop freezing on a box if you want EPG is to remove the phone jack PCB board inside on the far left corner if you are looking down on the box this card uses if some of the cpu but is no longer used
:):):):):)
|
