Originally posted by corkyvw:

---

al

andromeda would work but u would need to patch it so ur better goin for laky pro

---

Originally posted by stewson:

---

Originally posted by corkyvw:

---

al

andromeda would work but u would need to patch it so ur better goin for laky pro

---

iv tried larky pro check back few these posts there are links for images etc all over this forum

check the link below speak to turner he will help you either by email or phone he is a genuine guy just email him he is always at hand to help

---

Originally posted by fruitgums:

---

hi,

i have a nokia dbox, does anybody know which image i use. i live in portsmouth?

thanks

---

Originally posted by JR25:

---

Ladies and Gents

Is there any program for the Nokia dbox that will automatically update the codes. The Bigmaq toolbar takes ages to update.

thanks in advance

JR

---

Originally posted by grinlike:

---

Hi i was trying to help out a friend so that his box would AU (like mine does thanks to this thread) but when i clicked on test network settings everything failed the ip for the box failed it came up with (socket error) and the rest said unreachable, i am very new at this so could this error message be from my settings or is there posibly a fault with the socket that the cable goes into ? any guidence would be greatly appriciated

---

Originally posted by mgb17:

---

Originally posted by grinlike:

---

Hi i was trying to help out a friend so that his box would AU (like mine does thanks to this thread) but when i clicked on test network settings everything failed the ip for the box failed it came up with (socket error) and the rest said unreachable, i am very new at this so could this error message be from my settings or is there posibly a fault with the socket that the cable goes into ? any guidence would be greatly appriciated

---

It looks like your network settings are wrong.
The whole thing depends on the method you connect your pc and the dbox.
If you use an router you should use dhcp.
If you use an crossover network cable for a direct connection both IP's have to be set manually and have to be in the same logical network. Same logical method means the first 3 number ranges in the IP must be the same at dbox and pc.

---

Originally posted by turner123:

---

whoo hooo i am back done my detention longest 2 days ever, need to catch up now lol, anyway how is ever1 hope all fine any help with the dboxs im happy to help

---

Originally posted by sc0user:

---

Paul can you help this girl above please as I sent her over here to see you http://forums.afterdawn.com/thread_view.cfm/663550 many thanks as always ;)

---

Originally posted by soulefl:

---

hello every one,
I was trying to connect my Dbox2 to the pc to downlaod 7.bin on it, I have make step by step all what was written, my Dbox is connect with the cable, I plug the rj45 rooter, but when I look on my pc connection, there seems to be no connection, I'm sure that all the firewell are off, even the antivirus was off, but no connection.
I was even enable to click on repair the connection as it was grey.

I can't understand, do you think it's a technical problem on my Dbox, because, as I said, even when I try to make a scan, my Dbox doesn't detect any transponder.
any advice, I would like to look inside it, but not easy to open it, as I don't have the scraw driver for it.
I was doin all this:

First things first, Setting up the PC so that its ready to communicate with the Dbox
1. Open the Control Panel then go into Network Connections
2. You may have a few different connections so disable all of them with the exception of the
connection that you are going to use to communicate with the dbox.
3. Right click on the connection to be used and select "Properties"
4. If using Windows XP turn off the firewall by clicking on the "Advanced" tab, click "Settings"
under "windows firewall" then select "Off" then click "Ok" then click on the "general" tab
4b. If you are using another firewall then be sure to disable it or you won't be able to connect to
the Dbox. If you don't know how then stop here.
5. Double click on "internet protocol" to take you into the IP settings
6. Click "Use the following IP addess"
7. Type in 192.168.0.101 into the "IP address box
8. Type in 255.255.255.0 into the "Subnet mask" box if it is not automatically put in
9. Type in 192.168.0.1 into the "Default gateway" box
10. Click "OK" then "OK" again to save the settings

Thats the computer ready now its time to setup the DBox
1. If not already turned on, turn on the Dbox. If there is no image on the box or if "Kein System" is
showing on the display then move onto the IFA tutorial.
2. Once booted up press the "Dbox" button on the remote which on mine is 2 below the power
button
3. Select "Settings" from the menu that pops up on the screen (should be 4 from the bottom)
4. Select "Network" from the new menu (should be 6 from the top)
5. Select "IP Address" (should be 7 from top) and change it to 192.168.0.100 then press "OK" on
the remote
6. Select "Default Gateway" (3 below IP Address) and change it to 192.168.0.1 then press "OK
on the remote
7. The "Subnet Mask" (Below "IP Address") should be 255.255.255.0, if it is not change it
accordingly
8. Select "Start/Restart Network Now" (5th from top)
9. Select "Show Active Network Settings" (4th from top)
10. Go "Back" then click "Save Settings" to save everything.

Now that everything is set up its time to communicate with your dbox
1. Connect your Dbox to your PC via the crossover cable.
2. Open your "Network Connections" from the "Control Panel" of your PC
3. Right click on the connection you are using to communicate with your DBox and select Repair
(this simply refreshes the connection)
4. Open up Internet Explorer or Flash FXP or whatever program you are using to connect to the
DBox
5a. If using Internet explorer simply type FTP://192.168.0.100 into it. If asked, the username is
"root" and the password is meant to be "Dbox2" but it can be absolutely anything.
5b. If using Flash FXP click on the lightning flash then quick connect then type 192.168.0.100 into
the "Server or URL" box type in "root" as the username and "dbox2" as the password then click
"Connect"

so even when I try to connect to the flash FXP there is no connection.
help please.
I'm using the same router that I use to connect my pc to the internet box, so because I don't have an other one, so I took off the rooter from my internet box and I plug it on the Dbox2.
and in the same time, I took off the cable that was plug on the internet box and plug it again on the Dbox?
so I don't know if it's right.

---