|
Dbox In Ireland
|
|
|
ruprect
Senior Member
|
13. August 2007 @ 07:15 |
Link to this message
|
Originally posted by mullingar:
I have a sagem 1X Ruprect. I think it was your Blade image that I put on it though. Yesterday while watching E4 it was terrible. Screen started going all haywire and pixelated. Normally I do a channel change but I needed to reboot Neutrino. The strange thing is that when I am watching the sky movie channels there is never a problem... confused as Im fairly new to this. I flashed the image but used my cables and bouquet file from previous as when I first flashed the blade there were no channels found.
I am also using a signal booster. Would that be it at all?
My image should have been set to gbox as standard. If using NTL dublin the channels should have come in OK, but it can take 20mins to decode. If you only change bouquet & cables then it should be the same frequencies as mine. The frequencies are held in the services file. I found that no scan in any cables file I found could have produced the service file I use. If you replaced the service file then your old one could be different frequencies.
Also try without the booster, try it via a dvdrecorder or video. My mates argos booster is overheating and not working well. I have read others have gone through a fair few. Most seem to recommend a big yellow one on ebay, but it is ?45. Cheaper to get a nokia in the first place.
This message has been edited since posting. Last time this message was edited on 13. August 2007 @ 07:17
|
|
Advertisement
|
|
|
|
|
ruprect
Senior Member
|
13. August 2007 @ 07:18 |
Link to this message
|
Originally posted by dc69:
i had the folding screen problem with my dbox but i switched to a dreambox and havent had it since,so its a dbox only problem
I have seen the setanta screen issue on 2 different pace boxes. You could probably get it to happen on a dreambox too. Go to setanta and mess about with your dreambox settings, 16:9 should get you the problem.
|
|
mossyd
Newbie
|
13. August 2007 @ 08:00 |
Link to this message
|
Just wondering, does anyone know if the new Liverpool TV channel will be available when it comes out ?? If so, can I get my dbos ready for it before it does come out?
FYI on Nokia DBOX2 Ntell in Galway with Sportster image .. all working fairly good
This message has been edited since posting. Last time this message was edited on 13. August 2007 @ 08:10
|
|
ruprect
Senior Member
|
13. August 2007 @ 08:16 |
Link to this message
|
Originally posted by mossyd:
Just wondering, does anyone know if the new Liverpool TV channel will be available when it comes out ?? If so, can I get my dbos ready for it before it does come out?
FYI on Nokia DBOX2 Ntell in Galway with Sportster image .. all working fairly good
I heard it is coming soon. Dunno about galway, I imagine it could well appear on one of the old channels, I have about 8 channels at in my images/services with nothing on them.
|
|
mossyd
Newbie
|
13. August 2007 @ 09:20 |
Link to this message
|
Originally posted by ruprect:
Originally posted by mossyd:
Just wondering, does anyone know if the new Liverpool TV channel will be available when it comes out ?? If so, can I get my dbos ready for it before it does come out?
FYI on Nokia DBOX2 Ntell in Galway with Sportster image .. all working fairly good
I heard it is coming soon. Dunno about galway, I imagine it could well appear on one of the old channels, I have about 8 channels at in my images/services with nothing on them.
Thanks ruprect, I have mine cleaned up so no blank channels. If it does happen to show up for you please pm me, thanks
Another question .. got recording working to laptop .. but I am not sure if it is possible via the dbox2 to watch a film I have on the laptop on the tv .. have other means but would be handier this way.. :-)
|
Senior Member
|
14. August 2007 @ 11:21 |
Link to this message
|
Originally posted by mossyd:
Just wondering, does anyone know if the new Liverpool TV channel will be available when it comes out ?? If so, can I get my dbos ready for it before it does come out?
FYI on Nokia DBOX2 Ntell in Galway with Sportster image .. all working fairly good
I heard (read?) somewhere that NTL would not be carrying this channel until Jan2008, can't recall where I heard it though so it could be codswallop!
Edit: Checked this again and according to the Liverpool website, Setanta will be including this as part of their 8 channel package which means it should be available as soon as they start broadcasting (Sept). Come on the reds!!
This message has been edited since posting. Last time this message was edited on 14. August 2007 @ 11:30
|
|
Robbiel
Junior Member
|
14. August 2007 @ 14:10 |
Link to this message
|
Can someone tell me why my friend that has a box "installed" by an N*L engineer, why he has all the movies and sports and he never has had to "flash" the box. He has had it for the last 2 years?
|
Senior Member
|
14. August 2007 @ 14:22 |
Link to this message
|
|
Just Lucky i guess.....................Paul
|
Junior Member
|
15. August 2007 @ 00:31 |
Link to this message
|
Hi guys. I have the (Blade_Trinity_V2_Dublin_Sagem_1x) installed on my Sagem since last week. Its feezing alot on me and this morning I could only get the sky Movie channels and none of the other FTA channels. Even Sky news was freezing and chirping terribly. I had commando 6.2 and switched to this Blade image on Friday hoping it'd work. It is slightly better, but does anyone know an image that will not freeze at all on Sagem 1X in Dublin on NT£?
Really need help on this. Is anyone else having this problem on the new Blade image?
Mullingar
|
|
srevor
Junior Member
|
15. August 2007 @ 02:12 |
Link to this message
|
Originally posted by mossyd:
Another question .. got recording working to laptop .. but I am not sure if it is possible via the dbox2 to watch a film I have on the laptop on the tv .. have other means but would be handier this way.. :-)
I think you can watch movies through VLC player on your laptop via dbox2. I havent tried it yet but it shouldn't be too hard to find some info on it.
|
|
ronin2009
Junior Member
|
16. August 2007 @ 03:10 |
Link to this message
|
Hi
i was wondering if anyone could help me regards Bouquets and undating them to get channels in order?
i everything setup and i ftp'd the proper bouquets across to the box and replaced the existing file but still the box show the channels in the order of the services.xml file but if i go into bouquets editor it says the channels are in order. and won't change them.
could someone please tell me how i go about arranging the channels properly? i'm using a Nokia DBOX2 sportster 1.7 dublin img and i'm on Dublin nt!
how do i get it to stop showing channels in the services.xml format and in the order of the bouqeuts instead?
Thanks folks any help would greatly be appricated plus if you know of any easy to use english bouqeut editors would be great
regards
Paul
|
|
mgb17
Senior Member
|
16. August 2007 @ 04:04 |
Link to this message
|
If you upload a bouquets.xml you have to reboot the box or reload the channel list.
|
|
mossyd
Newbie
|
16. August 2007 @ 04:16 |
Link to this message
|
Originally posted by SG8:
Originally posted by mossyd:
Just wondering, does anyone know if the new Liverpool TV channel will be available when it comes out ?? If so, can I get my dbos ready for it before it does come out?
FYI on Nokia DBOX2 Ntell in Galway with Sportster image .. all working fairly good
I heard (read?) somewhere that NTL would not be carrying this channel until Jan2008, can't recall where I heard it though so it could be codswallop!
Edit: Checked this again and according to the Liverpool website, Setanta will be including this as part of their 8 channel package which means it should be available as soon as they start broadcasting (Sept). Come on the reds!!
Cheers SG8 for that ... hope to get it workin here .. Sunday will be interesting!
|
|
mossyd
Newbie
|
16. August 2007 @ 04:59 |
Link to this message
|
Originally posted by srevor:
Originally posted by mossyd:
Another question .. got recording working to laptop .. but I am not sure if it is possible via the dbox2 to watch a film I have on the laptop on the tv .. have other means but would be handier this way.. :-)
I think you can watch movies through VLC player on your laptop via dbox2. I havent tried it yet but it shouldn't be too hard to find some info on it.
Thanks srevor .. ya I found 'follow me' guides on techno-source but following them aint work for me .. even changed codes trying to get it to work but all to no avail .. will have to spend more time on it I guess .. Any ideas welcome!
|
|
ronin2009
Junior Member
|
16. August 2007 @ 05:30 |
Link to this message
|
Originally posted by mgb17:
If you upload a bouquets.xml you have to reboot the box or reload the channel list.
i have before well using the shutdown option. do i need to plus the plus for a proper reboot?
|
|
ruprect
Senior Member
|
16. August 2007 @ 05:59 |
Link to this message
|
Originally posted by Robbiel:
Can someone tell me why my friend that has a box "installed" by an N*L engineer, why he has all the movies and sports and he never has had to "flash" the box. He has had it for the last 2 years?
it is probably a pace box with the talkback disabled (so n*l cannot see what you are up to). then they create their own special card and it should work. My mate has one, but it did go down a few times. His 2 year old keeps pulling the card out, and that might have caused it, the guy who did it said he must never turn it off, or take the card out. It is down completely at the moment.
He has a nokia & sagem in the house too, both working fine. I have had a fair few nokias running in mates houses for about 6 months now, no updates needed, not a flicker/freeze out of them.
I have heard of N*L engineers installing starviews in people houses, arriving in the N*L van and with the uniform/jumper still on! And to top that the lads getting them installed were gardai
|
|
ronin2009
Junior Member
|
16. August 2007 @ 06:21 |
Link to this message
|
Originally posted by ronin2009:
Originally posted by mgb17:
If you upload a bouquets.xml you have to reboot the box or reload the channel list.
i have before well using the shutdown option. do i need to plus the plus for a proper reboot?
sorry lazy typing... do i need to pull out the plug for a proper reboot
|
|
mgb17
Senior Member
|
16. August 2007 @ 06:26 |
Link to this message
|
|
If there is no reboot option in the dbox button menue pulling the plug is a possibility.
Shutdown to standby is not a reboot.
You can use instead the option reload channel list in the service menue if you want.
|
|
dc69
Member
|
16. August 2007 @ 08:36 |
Link to this message
|
Originally posted by ruprect:
Originally posted by dc69:
i had the folding screen problem with my dbox but i switched to a dreambox and havent had it since,so its a dbox only problem
I have seen the setanta screen issue on 2 different pace boxes. You could probably get it to happen on a dreambox too. Go to setanta and mess about with your dreambox settings, 16:9 should get you the problem.
no absolutley perfect no matter what setting,I cant get it to show the folding screen
|
|
ruprect
Senior Member
|
16. August 2007 @ 08:40 |
Link to this message
|
Originally posted by dc69:
Originally posted by ruprect:
Originally posted by dc69:
i had the folding screen problem with my dbox but i switched to a dreambox and havent had it since,so its a dbox only problem
I have seen the setanta screen issue on 2 different pace boxes. You could probably get it to happen on a dreambox too. Go to setanta and mess about with your dreambox settings, 16:9 should get you the problem.
no absolutley perfect no matter what setting,I cant get it to show the folding screen
Good to know. Do you have a dbox too? can you confirm the dbox has the dodgy screen at the same time. It is only certain matches that get the folding screen, half the time it seems fine. Somebody else said ucode 0014 fixed it, but I reckon it was just coincidence that the match broadcast after changing was OK.
|
|
ruprect
Senior Member
|
16. August 2007 @ 08:46 |
Link to this message
|
Originally posted by ronin2009:
Hi
i was wondering if anyone could help me regards Bouquets and undating them to get channels in order?
i everything setup and i ftp'd the proper bouquets across to the box and replaced the existing file but still the box show the channels in the order of the services.xml file but if i go into bouquets editor it says the channels are in order. and won't change them.
could someone please tell me how i go about arranging the channels properly? i'm using a Nokia DBOX2 sportster 1.7 dublin img and i'm on Dublin nt!
how do i get it to stop showing channels in the services.xml format and in the order of the bouqeuts instead?
Thanks folks any help would greatly be appricated plus if you know of any easy to use english bouqeut editors would be great
regards
Paul
Have you opened your bouquet in internet explorer?, if there is an error in the syntax it usually shows up in IE, it will have some error report as you scroll down. while in notepad/wordpad you might not notice it, can be a missing < > / etc. I think I had a dodgy bouqeut file once, and I think it just ignores it and defaults to your services file.
|
|
ronin2009
Junior Member
|
16. August 2007 @ 10:04 |
Link to this message
|
I think i'm about to lose my mind with these channels lists
i have tried everything mentioned but still it pays no attention to the bouquet the box just seems to arrange the channels alphbetically
starting with abc1 etc..
even if i try and manually arrange the channel in the bouquet editer and save setting after i arrange them and i go back into it 2 seconds later and it's back to the same again all sorted alphabetically.
the bouqet i'm using i use for chorus and it's fine have used it before for ntl too with no problems.
but i just can't see where it's getting the channel list from it's not the bouquet and not the services.xml
does any one have another ntl dublin bouqeqt?
thanks again for you help guys
Paul
|
|
mgb17
Senior Member
|
16. August 2007 @ 10:23 |
Link to this message
|
|
Why do you think a bouquets.xml for ntl should work for chorus?
|
|
scoopster
Newbie
|
16. August 2007 @ 14:38 |
Link to this message
|
Originally posted by bigdunc:
Told you above mate
Make sure you enable your soft cam
D box
settings
Softcam enable megcam or restart it .............Paul
cheers mate it wouldnt work with c8 so iflashed 8.2 and it seems fine except setanta seem a bit jumpy and also when i turn it off it doesnt go into standby with time shown on lcd like comm 6 byt a cosmic image like a supernova comes up and box shuts down so reboots everytime i turn it on can this be changed! thanks again
AAAgh A Bobcat is Chasing a Rattlesnake Towards Me!!
|
|
Advertisement
|
|
|
|
Deeco
Junior Member
|
16. August 2007 @ 14:39 |
Link to this message
|
i want to buy dbox2
MULTIMEDIA TERMINAL DVB BY NOKIA flashed with latest DVB2000 Software
Want it to work on ch$$$s mmds signal in northeast ireland could't get eurovox to work will the dbox 2 work
I love orange soda!!
|
