|
Nokia Dbox2
|
|
Please note that the forum rules have changed. Posting of new codes is no longer allowed. See this thread for more information.
|
|
asd36
Junior Member
|
11. April 2008 @ 09:19 |
Link to this message
|
|
toolbar/cablefiles/set top cable files/dboxes/dbox2/complete dbox files.
download th complete dbox files,unrar,then look for setup_dboxifa_en
|
|
Advertisement
|
 |
|
|
|
micksy
Account closed as per user's own request
|
11. April 2008 @ 09:22 |
Link to this message
|
|
hi gugs anyone got the latest codes for ntl northern ireland,last update thursday 8.30 but of again. thanks in advance
g mcminn
|
|
paul_here
Junior Member
|
11. April 2008 @ 10:11 |
Link to this message
|
I have a Nokia DB2 with sportster 1.7 and have just entered the following:
00 - 46896D870724422F
01 - 9128EFB57B371FED
clicked on emu settings,evocamd and then emu/auto update and deactivate. Then rebooted
Still no joy
do i have to rescan now?
Can anyone fron Ayles**ry Buckingh*m give me a set of codes that work please
|
|
sean111
Newbie
|
11. April 2008 @ 10:17 |
Link to this message
|
|
I live in Derby and have a D box sportster 1.73. Channels have been
switched off apart from free channels! can any1 advise me how to get
them bak on!
PLZ!
Thanku
|
|
henry1357
Suspended due to non-functional email address
|
11. April 2008 @ 10:23 |
Link to this message
|
Try this method has worked for me and a couple of others on here
You need to be running evocamd.
If you use tuxbox commander and go to your keylist.txt file, don't open it just press 4 on the remote to edit it, delete everything from it. (Red button on most). Exit then save.
Restart box go to encrypted channel, then go back to keylist.txt file, make a note of the key in there. Delete it again, save and restart box again, this will create a new one, which will be slightly different, 2 digits will be different.
first example; abcdef0123456789
second time; abcdef0125456780
as you can see 2 of the digits are different, so i need to change one of the digits either the 5 or the 0 and replace it with whatever was in its place on the first go.
final example; abcdef0123456780
save file and reboot and it should work, if it didn't, i would have picked the wrong digit, so i would change the other digit and put back the first one i changed.
Have a go, its easier when you see it for yourself. You only have a choice of two to swap, its either one or the other.
(haven't turned autoupdate off as don't see no reason too)
Originally posted by sean111:
I live in Derby and have a D box sportster 1.73. Channels have been
switched off apart from free channels! can any1 advise me how to get
them bak on!
PLZ!
Thanku
|
|
adm1
Newbie
|
11. April 2008 @ 10:34 |
Link to this message
|
I think i've damaged my dbox.
its a nokia dbox2. i was flashing a new image but
halfway through it just froze and nothing i could do
would unfreeze it so i pulled the plug.
when i plugged it back in i get 'kein system' .
I've used IFA before so i tried that carefully following instructions
but no luck (it worked for me a few weeks back).
when i hold the up button after reboot for a few secs its stays
stuck on 5 bars and doesn't go to 'kein system' at all.
does this mean the memory is screwed?
was using IFA through my router but have also tried a crossover cable with
firewall off and card set to 10mbit half duplex.
any ideas?
thx
|
|
sean111
Newbie
|
11. April 2008 @ 10:41 |
Link to this message
|
|
When i am in (keylist.txt) i can not change from veiw to edit by pressing 4! nothing happens!
|
|
asd36
Junior Member
|
11. April 2008 @ 10:43 |
Link to this message
|
|
adm1 are u using a null modem cable??? if not get one and try again with ifa.
|
|
Adi69
Newbie
|
11. April 2008 @ 10:44 |
Link to this message
|
Quote:
Restart box go to encrypted channel, then go back to keylist.txt file, make a note of the key in there. Delete it again, save and restart box again, this will create a new one, which will be slightly different, 2 digits will be different
Have tried this a few times.....but no codes come back what so ever. I've switched auto update on and tried a force keys update, but no matter what I try, no keys seem to appear. Have tried manually putting the keys in, and still nothing. I must be doing something wrong
|
|
henry1357
Suspended due to non-functional email address
|
11. April 2008 @ 10:44 |
Link to this message
|
You press 4 when keylist.txt is highlighted not when you are in it.
Originally posted by sean111:
When i am in (keylist.txt) i can not change from veiw to edit by pressing 4! nothing happens!
|
|
sean111
Newbie
|
11. April 2008 @ 10:45 |
Link to this message
|
|
what is a null modem cable? i am not sure if a am using 1
|
|
sean85
Junior Member
|
11. April 2008 @ 10:51 |
Link to this message
|
Originally posted by sean111:
what is a null modem cable? i am not sure if a am using 1
you dont need one to manualy enter codes i have same image as you follow this
press the blue button
go to tuxbox commander
high light key list.txt mine is highlighted when page opens
press 4
pick the newest code and press ok then you can edit the code
once you done this press home button on remote (under power)
press red to save
then home button again and save
This message has been edited since posting. Last time this message was edited on 11. April 2008 @ 10:53
|
|
patmanda
Newbie
|
11. April 2008 @ 10:55 |
Link to this message
|
Originally posted by sean111:
I live in Derby and have a D box sportster 1.73. Channels have been
switched off apart from free channels! can any1 advise me how to get
them bak on!
PLZ!
Thanku
1st of all download bigmaq toolbar(google)for latest codes then go to http//forums.afterdawn.com/thread_view.cfm/648626 to message posted by scoopdog on 7th April@2145 an follow these instructions. worked for me so many thanks to that person. may heve to update daily as i did mine last night an codes changed again this morn a pain i know but free still lol
|
|
billie22
Junior Member
|
11. April 2008 @ 10:55 |
Link to this message
|
I live in Edinburgh I have a nokia Dbox 2 sportster the new TWest (VM) key is 6F9BA23250673657 VM had this as their code 6F9BA23250773657 I only hade to change the 7 to a 6 and this is how I did it
first download bigmaq toolbar that gave me the codes
1 - press the blue button on your DBOX - and go to option 2 Tuxbox commander.
2- then scroll down to the option that says "var" and press ok
3- scroll down to "keys" and press ok
4- scroll down to "keylist.txt + press 4 (DO NOT PRESS OK)to edit you must PRESS 4
5- When the line is enlarged then press ok to start editing
6- after 00 - Type in your new key code
7 - Press ok to exit then press the button under your power button (under the orange button)
8- and save changes when asked, if box is in German press ja.
9- Reboot (restart your box)
Good luck all should be working!!!
Billie22
|
Newbie
|
11. April 2008 @ 10:56 |
Link to this message
|
|
Can anyone tell me how to change cam to mgcam in the extras settings for dbox2?
|
|
turner123
Suspended permanently
|
11. April 2008 @ 11:00 |
Link to this message
|
Originally posted by henry1357:
pm me and i will send you a guide
Originally posted by asd36:
klein system=reflash with "flashing assistent" avaiable on bigmaqtoolbar.You will need nullmodem cable and ethernet patch cable.
hi i have the null cable also ifs but dont seem to get to grips with it ?? i have been told hyperterminal prob best way has you or any1 got a step by step pdf how to get from kein system using hyperterminal
|
|
sean111
Newbie
|
11. April 2008 @ 11:00 |
Link to this message
|
|
cheers Henry, that worked!
I am on keylist.txt (edit)
I do not know what to do from here> codes etc.
I live in Derby HELP PLZ
Thanks!
|
|
asd36
Junior Member
|
11. April 2008 @ 11:02 |
Link to this message
|
|
null modem cable is for "ADM1"s problem not sean111...
|
|
adm1
Newbie
|
11. April 2008 @ 11:08 |
Link to this message
|
I'm off to buy a null modem cable so haven't tried this yet but here are instructions i found:
the file metioned can be found here:
http://rapidshare.com/files/106657439/u-boot.mot.html
How To Flash A Dbox2 Using Serial Cable Only.
This guide has been written for those who, like myself, found that
the only avenue left open to them was to flash their Dbox2 using a serial
modem lead, as the normal method of using Image Flashing Assistant
(IFA) had not been successful. Make sure before you start this procedure
that you print this info out to make it easier to follow and that you place
the attached file (u-boot.mot) in the root of C drive.
Ignore all quotes "" as they are simply there to simplify
matters. Please note that all the input text is "case sensitive" so keep it
in lower case only, no CAPITALS.
To start with switch off Dbox from the mains and connect it to
your PC using serial modem cable only, as this method does not require
the use of any network cables or ports. Start up your computer and then
start Hyper Terminal by selecting "Start", then "Run" and then type in
"hypertrm". This will start Hyper Terminal.
Hyper Terminal first asks you to give the new connection a name
and an icon, so call the session "dbox" but we can forget about the icon.
Click OK. Then when it says "Connect using" select your appropriate com
port, usually com1. DO NOT select TCP/IP (Winsock). Then you have
to configure the Com port properties, any errors here and the PC will not
communicate with the Dbox, so please double check they are as
follows:-
Bits per second - 9600
Data bits - 8
Parity - None
Stop bits - 1
Flow control - Xon/Xoff
Press OK to save settings once you have double checked they are as
above. Hyper Terminal should now say that it is "connected" in the
bottom left hand corner of its window. Now press and hold the "UP"
button on your Dbox (not the remote) and turn the power to it back on.
Once you see writing like the example given below displayed in the
Hyper Terminal window it is safe to release the UP button (normally
within seconds).
Êdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-29.b7.19.07.00.00-d2
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26160, &_data 0x26160, &_edata
0x29c50
debug: &_end 0x347dc, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root>
At the prompt type "dl 800000" then press Enter. This message
should appear "S record load, offset: 800000"
OK, now click on the "Transfer" tab at the top of Hyper Terminal and
select "send text file", then when the pop up box appears select "All
Files" from the drop down menu at the bottom and then you can
negotiate to the location that you have stored the file named "u-
boot.mot", for this example we will use the root of C drive. Once you
have found it click on it and press "Open" to start the file transfer. At this
point you need to find something to do for 45 minutes or so :). There is
also no on screen verification that it is actually doing anything, but have
faith.
After the file has been successfully transferred this message should
appear:-
"dl: start address 0x800000"
"dbox2:root >"
"dbox2:root >"
If so then type in the following:-
"chorus 800000" then press Enter. This process starts the file we have
just downloaded. We need to stop the attempted connection by pressing
the "ctrl" and "c" keys together (ctrl+c) on the keyboard. You need to do
this two or three times until the message "Abort" appears. Then type the
following:-
"loadb 120000 115200" then press Enter. U-boot announces "## Switch
Baud rate to 115200 bps and press ENTER...". In Hyper Terminal stop
the connection by selecting "Call" then "Disconnect". Click "File" then
"Properties" then "Configure" and change the "Bits per second" from
"9600" to "115200". Click on OK twice to leave the menus.
Select "Call" from Hyper Terminal then "Call" from its menu to
reconnect to Dbox. Press Enter on the keyboard to proceed to next step.
U-boot announces "## ready for binary (Kermit) download to
0x00120000 at 115200 bps". Click on "Transfer" again on the top of
Hyper Terminal and select "Send File". At this point you direct the
program to the image that you wish to download into your Dbox. Just
use any one of the images available from the download section as they
are all "Without Bootloader" already. Once image is selected choose
"Kermit" Protocol from the drop down menu at the bottom. Click on
"Send". At this point you need to find something to do for another 45
minutes or so :). However, this time you can clearly see the progress of
the transmitted file within Hyper Terminal and the LCD on the Dbox will
show "loading kernel" during the process.
After transfer is complete u-boot announces:-
"## total size = 0x007E0000 = 8257536 bytes"
"## start ADDR = 0x00120000"
"## Switch baud rate to 9600 bps and press ESC"
In Hyper Terminal stop the connection by selecting "Call" then
"Disconnect". Click "File" then "Properties" then "Configure" and change
the "Bits per second" back from "115200" to "9600". Click on OK twice to
leave the menus. Select "Call" from Hyper Terminal then "Call" from its
menu to reconnect to Dbox. Press "Escape" key on the keyboard to
proceed to next step. U-boot prompt appears again " = > " so finally
type in these instructions:-
"protect off 10020000 107fffff" then press Enter.
"erase 10020000 107fffff" then press Enter and wait approx 1 minute till
it erases all sectors (70 in total).
"cp.l 120000 10020000 1f8000" then press Enter. This starts the internal
Image Flashing process. Wait approx 2 minutes and "Done" should
appear in Hyper Terminal window.
Shut down Hyper Terminal program
(you need not save anything) unplug Dbox2 from the mains and remove
serial lead too. Then apply power to your Dbox2 and hopefully you have
just done what you thought was impossible. Well done, you deserve a
cuppa.
|
|
henry1357
Suspended due to non-functional email address
|
11. April 2008 @ 11:18 |
Link to this message
|
clear all codes then reboot turn to encrypted channel (eg sky spts 1) for a few seconds then check codes again one or both of the codes should be 1 digit out from the ones generated on the bigmaq toolbar for your area, edit it/them so it is the same as bigmaq tool bar codes and reboot dbox. and t5hat should be it.
get bigmaq toolbar here http://bigmaq.ourtoolbar.com/
Originally posted by sean111:
cheers Henry, that worked!
I am on keylist.txt (edit)
I do not know what to do from here> codes etc.
I live in Derby HELP PLZ
Thanks!
|
|
henry1357
Suspended due to non-functional email address
|
11. April 2008 @ 11:21 |
Link to this message
|
sorry forgot something you need to save changes after you clear codes
Originally posted by henry1357:
clear all codes then reboot turn to encrypted channel (eg sky spts 1) for a few seconds then check codes again one or both of the codes should be 1 digit out from the ones generated on the bigmaq toolbar for your area, edit it/them so it is the same as bigmaq tool bar codes and reboot dbox. and t5hat should be it.
get bigmaq toolbar here http://bigmaq.ourtoolbar.com/
Originally posted by sean111:
cheers Henry, that worked!
I am on keylist.txt (edit)
I do not know what to do from here> codes etc.
I live in Derby HELP PLZ
Thanks!
|
|
asd36
Junior Member
|
11. April 2008 @ 11:23 |
Link to this message
|
|
|
|
sean111
Newbie
|
11. April 2008 @ 11:37 |
Link to this message
|
OMG THANK YOU SOOOOOOO MUCH HENRY PAL!!!
|
|
sean111
Newbie
|
11. April 2008 @ 11:46 |
Link to this message
|
|
HOW LONG DO U THINK TILL ITS TURNED OFF AGEN!
AND IFIT IS DO I JUS FOLLOW THE PROCEDUE AGEN?
THANKS AGEN !
|
|
Advertisement
|
|
|
|
adm1
Newbie
|
11. April 2008 @ 12:04 |
Link to this message
|
|
great. IFA worked with a null modem cable so i didn't need to use hyperterminal.
thanks.
|
