|
Nokia Dbox2
|
|
Please note that the forum rules have changed. Posting of new codes is no longer allowed. See this thread for more information.
|
|
bigclaret
Suspended due to non-functional email address
|
12. April 2008 @ 06:00 |
Link to this message
|
Originally posted by bryandir:
Originally posted by bigclaret:
When I go the codes ther are 6 of them on my dbox, what do I do, which ones do I change and has anyone got the current codes for a pure ntl / virgin area in east lancashire please
go to google,type "bigmaq toolbar" and then go to "latest keys" very simple...
as for the question on what keys to change...change only after the "00" and the "02" from the latest keys on your box...
#
just downloading the toolbar, but none of my current codes have 02 at the start will that matter and should there actually be 6 codes.??
stuart
|
|
Advertisement
|
 |
|
|
|
bryandir
Member
|
12. April 2008 @ 06:01 |
Link to this message
|
Originally posted by oddogg:
i had to rescan it the put codes in turned on evocam hey presto the kids delighted shes got nick jr back how long has yours been working its crashed a couple of times but just had to change 1 digit
mines has been on since 4:30 on friday...
but i fear the worst....its too good to be tru,i think that telepest will blitz it today and tomorrow during the football just to get it right up us!
i just hope someone somewhere is working on an image to fix all this...
|
|
bryandir
Member
|
12. April 2008 @ 06:06 |
Link to this message
|
Originally posted by bigclaret:
Originally posted by bryandir:
Originally posted by bigclaret:
When I go the codes ther are 6 of them on my dbox, what do I do, which ones do I change and has anyone got the current codes for a pure ntl / virgin area in east lancashire please
go to google,type "bigmaq toolbar" and then go to "latest keys" very simple...
as for the question on what keys to change...change only after the "00" and the "02" from the latest keys on your box...
#
just downloading the toolbar, but none of my current codes have 02 at the start will that matter and should there actually be 6 codes.??
your keys should read
N 5A01 00 (AND THEN THE REST OF THE CODE)
THEN
N 5A01 01 (AND THE REST OF THE CODE)
JUST EDIT AFTER THE N 5A01 00
|
|
bigclaret
Suspended due to non-functional email address
|
12. April 2008 @ 06:06 |
Link to this message
|
Sorry to be a pain but do I need to change the dates ect or just the code numbers.
My other dbox has no codes at all so will I need to put the rom 10 AU gubins in or willit do that for me once Iput the codes in
cheers stuart
stuart
|
|
bryandir
Member
|
12. April 2008 @ 06:07 |
Link to this message
|
|
IF YOUR CODES DONT READ LIKE ABOVE..CREATE THEM..JUST MAKE SURE THE FIRST 2 CODES THE DBOX READS ARE THE 00 CODE AND THE 01 CODE....
|
|
oddogg
Newbie
|
12. April 2008 @ 06:08 |
Link to this message
|
|
if your box hasnt code any codes rescan it 1st
|
|
bryandir
Member
|
12. April 2008 @ 06:12 |
Link to this message
|
Originally posted by bigclaret:
Sorry to be a pain but do I need to change the dates ect or just the code numbers.
My other dbox has no codes at all so will I need to put the rom 10 AU gubins in or willit do that for me once Iput the codes in
cheers stuart
if your box has no codes then try and unplug and plug it back in, and the that should reset the codes to non working ones...you then edit ONLY the code numbers..nothing else...just the codes,no date and nothing before thecode....you should be changing 16 or 32 digits depending on if one or both sets have changed...
i would make a video on you tube,and give you detailed instructions on how to do it,but im scared it will get pulled or i would get suspended from youtube or even traced!!
|
|
mediya
Newbie
|
12. April 2008 @ 06:19 |
Link to this message
|
|
finally got it to work .... thanks a milliom u guys ... I used the keys from bigmaq's toolbar.
|
|
bigclaret
Suspended due to non-functional email address
|
12. April 2008 @ 06:23 |
Link to this message
|
Originally posted by bryandir:
Originally posted by bigclaret:
Sorry to be a pain but do I need to change the dates ect or just the code numbers.
My other dbox has no codes at all so will I need to put the rom 10 AU gubins in or willit do that for me once Iput the codes in
cheers stuart
if your box has no codes then try and unplug and plug it back in, and the that should reset the codes to non working ones...you then edit ONLY the code numbers..nothing else...just the codes,no date and nothing before thecode....you should be changing 16 or 32 digits depending on if one or both sets have changed...
i would make a video on you tube,and give you detailed instructions on how to do it,but im scared it will get pulled or i would get suspended from youtube or even traced!!
just one more thing, I've got the codes in but when I press the button below the power to return back it asks me to save the codes I press the gree button but it won't return it just stays on the codes any sugestions please
stuart
|
|
GOODW
Newbie
|
12. April 2008 @ 06:23 |
Link to this message
|
|
can someone please help,no one has responded to me pleeeeeeeeeeeeease........
C GOODWIN
|
|
billie22
Junior Member
|
12. April 2008 @ 06:28 |
Link to this message
|
Originally posted by GOODW:
can someone please help,no one has responded to me pleeeeeeeeeeeeease........
do you mean by ex c&w true ntl(before V/M took over or were you on T/W***?
Billie22
|
|
amvantage
Newbie
|
12. April 2008 @ 06:30 |
Link to this message
|
Finally back up and running thanks to JamJo and the advise below, cheers mate. Good luck to everybody else that is still trying to get the Channels back. Best advise I can give is download the Bigmaq tool bar.
Originally posted by JamJo:
Mine now works! Im with NTL/Virgin and it's been off for the past few days, thanks to this forum I've now fixed it, in appreciation I'll tell you all how. Here is what I did and I'm a total newbie: This took me 30 minutes with no prior knowledge of a dbox2.
(Note: I think my image is Sporster 1.73, not sure if this matters and I really don't know what an image is or how to change it, or even if I need to change it)
Note: Everything is done by the remote control on screen. I've pieced this together using bits of what other people have posted, it's not all my own but hopefully this may be easier to follow.
STEP 1: First press the blue button on the remote, choose Sportster (or blue button again), go to EMU settings (or blue button again) and choose EVOCAMD. Press green or go to EMU/Autoupdate. In grey it will tell you wether updates are activated or deactivated. Press yellow to deactivate if its not already deactivated. Press home x 3 back to the EMU selection screen, press red on the EVOCAMD to restart this.
STEP 2: You need to download software to your computer only. Do this by clicking the link and downloading/installing it to your computer: http://bigmaq.ourtoolbar.com/
This just adds a toolbar to your internet explorer. On the toolbar go to Latest Keys and choose your area, choose the latest date if more than 1 option and it will give you two codes which look like: KEY 0 (followed by digits) and KEY 1 (followed by digits). Make a note of these for the next step. This will hopefully tell you the code whichever area you live in.
STEP 3:
1 - press the blue button on your DBOX - and go to option 2 Tuxbox commander.
2- then scroll down to the option that says "var" and press ok
3- scroll down to "keys" and press ok
4- scroll down to "keylist.txt and press 4 (to edit)
5- If your like me and are in the Pure NTL area your codes will start like N 5401 01 etc etc, press ok on the 1st key which starts with N 5401 00
6 - Now use the codes you got from Biqmaq in step 2: Type in this number after 00 and the 01. i.e. overwrite the number after the 00 or 01 using your remote control. (it takes a while to get the knack of it).
7 - Press ok to exit then press home. It will ask you if you want to save, choose yes. Press home again and again save if asked until you are back to the normal screen.
Note: The screen will still be black at this point.
STEP 4:
Now press the blue button, go to Sportster (or blue button again), choose EMU SELECTION and press red or ok to restart the EVOCAMD, a confirmation message will be shown. Now your picture should appear. If not try to restart and then it should appear.
This is what I did and it worked for me. Good luck and many many thanks to everyone that helped me get my dbox working again. I really really appreciate it.
|
|
GOODW
Newbie
|
12. April 2008 @ 06:30 |
Link to this message
|
|
yes ex cable and wireless before vm took over.
C GOODWIN
|
|
sheppo
Inactive
|
12. April 2008 @ 06:37 |
Link to this message
|
|
tried the codes for telewest and not having any joy anyone got theirs working in liverpool area? please post back.
|
Newbie
|
12. April 2008 @ 06:47 |
Link to this message
|
Originally posted by billie22:
Originally posted by g2k:
Everyone should know the crack by now!
codes are here for all areas, or get Bigmaq
http://forums.afterdawn.com/thread_view.cfm/528527
Hi my box is OK but can you tell me is the above link dated 30 june 07 for starview box?s or is this the crack code to get the nokia D-box 2 the same as starview box so VM cant change codes?
Its just the latest keys to put into ur Dbox/Starview if you are getting blank screen, ur not so u dont need to change them, the keys are updated most days so you always have the latest.
The keys for each provider will work on whatever box ur using as long as you use the correct provider key, doesnt matter as far as I understand it.
If u want to stop VM updating keylist u need to stop AU on ur box, which I dont know how to do (I think this would still muck up the channels though as the key needs to be curent?)and havent found any posts stating the right way to do it.
|
|
billie22
Junior Member
|
12. April 2008 @ 06:48 |
Link to this message
|
Originally posted by GOODW:
yes ex cable and wireless before vm took over.
So try this I told a few people and it seemed to work!
1 - press the blue button on your DBOX - and go to option 2 Tuxbox commander.
2- then scroll down to the option that says "var" and press ok
3- scroll down to "keys" and press ok
4- scroll down to "keylist.txt + press 4 (DO NOT OK)to edit you must PRESS 4
5- your keys should read
N 5A01 00 (AND THEN THE REST OF THE CODE)
N 5A01 01 (AND THE REST OF THE CODE)
You are looking for the two that look the same as the two new codes which are
8A6B4256D5E3831E (the code should looks the same)
DB7E88CA37E39383 (the code should looks the same)
You will possibly just need to change one number so just look for the number which is different.
5- scroll onto it then press ok so you can now edit it
and depending on the number that matches after 00 or the 01 or the 02 - Type in your new key code
6 - Press ok to exit then press the button under your power button (under the orange button)
7- and save changes when asked, if box is in German press ja.
8- Reboot (restart your box)
9- all should be working!!!
Good luck
Billie22
|
|
joblog
Suspended due to non-functional email address
|
12. April 2008 @ 07:01 |
Link to this message
|
Hi everyone
i am also a complete newbi. I have read all the comments so far and made notes. I have a nokia d/box2 with sportster 1.7
Downloaded the bigmaq toolbar and got the details and the picture is back on. The only problem i have is there is no sound!
Could anyone help Please
|
|
claymores
Newbie
|
12. April 2008 @ 07:06 |
Link to this message
|
|
Made a complete hash of it all, then used BigMAQ to get things back and on track, but missing SpySports1. any pointers
|
|
billie22
Junior Member
|
12. April 2008 @ 07:09 |
Link to this message
|
Hi g2k, yes I agree this would still muck up the channels though as the key needs to be current
And now that I know how to change the codes and it does not take to long!
I also have a box (a pig in the poke I got from eBay) last year it was meant to be working but it wasn?t and they would not refund my fault, but it is waiting for me to work on it when you turn it no the display is green and I get a German message on the screen and I don?t know where to start, to let you know I am in my mid 60?s female and not to cleaver with pc or D-box 2 only what I am told and I will give anything a go ,but I need step by step so I can understand this is why I give step by step to other people.
SO IF ANY CAN HELP ME I WOLD BE GREATFUL.
Billie22
|
|
jdf36
Newbie
|
12. April 2008 @ 07:19 |
Link to this message
|
Hi Everyone,
I am having the same problem as everyone but I seem to be getting stuck at a certain point - can anyone help? I have a nokia d0box2 with sportster 1.73.
Some of the threads are saying that you need to turn off the Auto update - has everyone else done that?
That is the bit I am stuck with - Jamjo provided a precise list of what to do, which is brilliant (thanks Jamjo) but I cannot get my box to do what they stated, which was: -
STEP 1: First press the blue button on the remote, choose Sportster (or blue button again), go to EMU settings (or blue button again) and choose EVOCAMD. Press green or go to EMU/Autoupdate. In grey it will tell you wether updates are activated or deactivated. Press yellow to deactivate if its not already deactivated. Press home x 3 back to the EMU selection screen, press red on the EVOCAMD to restart this.
When I get to EVOCAMB and press green (i can't see anything that states Autoupdate at this stage by the way) it turns EVOCAMD grey, which seems to be correct but where is it supposed to tell me about being activated/deactivated - I can't see this? Also, pressing yellow only sorts the menu into alphabetic order and nothing else.
If I go in an change the codes without changing the auto update, the codes are just changing back to the old ones.
One final thing; before I read all of these threads, I did do a channel scan, which I have since read you shouldn't do. I have deleted all of the exatr channels that my box found but would that be having any effect?
I would really appreciate anyones help.
|
|
BEARGER
Newbie
|
12. April 2008 @ 07:24 |
Link to this message
|
Originally posted by amvantage:
Finally back up and running thanks to JamJo and the advise below, cheers mate. Good luck to everybody else that is still trying to get the Channels back. Best advise I can give is download the Bigmaq tool bar.
Originally posted by JamJo:
Mine now works! Im with NTL/Virgin and it's been off for the past few days, thanks to this forum I've now fixed it, in appreciation I'll tell you all how. Here is what I did and I'm a total newbie: This took me 30 minutes with no prior knowledge of a dbox2.
(Note: I think my image is Sporster 1.73, not sure if this matters and I really don't know what an image is or how to change it, or even if I need to change it)
Note: Everything is done by the remote control on screen. I've pieced this together using bits of what other people have posted, it's not all my own but hopefully this may be easier to follow.
STEP 1: First press the blue button on the remote, choose Sportster (or blue button again), go to EMU settings (or blue button again) and choose EVOCAMD. Press green or go to EMU/Autoupdate. In grey it will tell you wether updates are activated or deactivated. Press yellow to deactivate if its not already deactivated. Press home x 3 back to the EMU selection screen, press red on the EVOCAMD to restart this.
STEP 2: You need to download software to your computer only. Do this by clicking the link and downloading/installing it to your computer: http://bigmaq.ourtoolbar.com/
This just adds a toolbar to your internet explorer. On the toolbar go to Latest Keys and choose your area, choose the latest date if more than 1 option and it will give you two codes which look like: KEY 0 (followed by digits) and KEY 1 (followed by digits). Make a note of these for the next step. This will hopefully tell you the code whichever area you live in.
STEP 3:
1 - press the blue button on your DBOX - and go to option 2 Tuxbox commander.
2- then scroll down to the option that says "var" and press ok
3- scroll down to "keys" and press ok
4- scroll down to "keylist.txt and press 4 (to edit)
5- If your like me and are in the Pure NTL area your codes will start like N 5401 01 etc etc, press ok on the 1st key which starts with N 5401 00
6 - Now use the codes you got from Biqmaq in step 2: Type in this number after 00 and the 01. i.e. overwrite the number after the 00 or 01 using your remote control. (it takes a while to get the knack of it).
7 - Press ok to exit then press home. It will ask you if you want to save, choose yes. Press home again and again save if asked until you are back to the normal screen.
Note: The screen will still be black at this point.
STEP 4:
Now press the blue button, go to Sportster (or blue button again), choose EMU SELECTION and press red or ok to restart the EVOCAMD, a confirmation message will be shown. Now your picture should appear. If not try to restart and then it should appear.
This is what I did and it worked for me. Good luck and many many thanks to everyone that helped me get my dbox working again. I really really appreciate it.
Thank a million, followed your instructions and had picture back in 5 minutes. So simple even a technophobe like me managed it. Thanks again.
|
|
billie22
Junior Member
|
12. April 2008 @ 07:24 |
Link to this message
|
Originally posted by joblog:
Hi everyone
i am also a complete newbi. I have read all the comments so far and made notes. I have a nokia d/box2 with sportster 1.7
Downloaded the bigmaq toolbar and got the details and the picture is back on. The only problem i have is there is no sound!
Could anyone help Please
try this on a channel with no sound press blue twice press green then press ok if you dont get back to the screen press the back button or ok again the when on channel scroll up a couple of channels then down try this a couple of times to get sound if not the reboot, Good luck
Billie22
|
Newbie
|
12. April 2008 @ 07:26 |
Link to this message
|
Originally posted by billie22:
Hi g2k, yes I agree this would still muck up the channels though as the key needs to be current
And now that I know how to change the codes and it does not take to long!
I also have a box (a pig in the poke I got from eBay) last year it was meant to be working but it wasn?t and they would not refund my fault, but it is waiting for me to work on it when you turn it no the display is green and I get a German message on the screen and I don?t know where to start, to let you know I am in my mid 60?s female and not to cleaver with pc or D-box 2 only what I am told and I will give anything a go ,but I need step by step so I can understand this is why I give step by step to other people.
SO IF ANY CAN HELP ME I WOLD BE GREATFUL.
I saw this a couple of days ago
http://www.4shared.com/dir/6423171/b5ad6d47/sharing.html
u might get somethin useful from it :)
Box needs to be in debug mode to start with, sounds like your box doesnt actualy have an image on it yet, other than that I dont know alot about this stuff, too complicated to get right into it :(
|
|
emmanneil
Junior Member
|
12. April 2008 @ 07:32 |
Link to this message
|
|
TO CHANGE THE AU TO OFF
Firstly go to the tux commander,
look for a file called Camd not sure what file extension
press 4 (edit mode)
then look for AU this will be four lines long
you are looking for the bit that is in the brackets ie (02)
change this to (00)= Default ignore
then press home and press red then home again and press red
hope this helps as i am not at my box at the moment
thanks for everything
|
|
Advertisement
|
|
|
|
ralph99
Newbie
|
12. April 2008 @ 07:34 |
Link to this message
|
|
Hi Guys
I have a D Box 2 with Blade 2 Xenafan Image. As per everyone else I've lost all of my channels. From reading the guides on this forum I understand that I need to enter a new code. But what code should I enter? I live in Dudley, West Mids, and am supplied by V***n.
Any help would be appreciated!!
|
