|
Nokia Dbox2
|
|
Please note that the forum rules have changed. Posting of new codes is no longer allowed. See this thread for more information.
|
|
benboy12
Suspended due to non-functional email address
|
11. April 2008 @ 12:13 |
Link to this message
|
I would like to say thank you guys for all your advise and help. This forum has been the biz.
For newer forumees. I had one of the worst case senarios. I had snapshot in my DBox2 which refused to save anything. The box wouldnt flash, nor connect via the Network. None of the FTP programmes worked for me and I failed after trying to flash the box on 8 different occassions with 6 different images: It felt like hell!
What I eventually did was
- Follow the guide regarding using a null modem cable and Window's HyperTerminal. I also bought a Null Modem Cable
- Ran this repeatedly with different images and even though I had used several Commando images which wouldn't respond I found this one - and this definitely works http://www.4shared.com/file/43743951/1bc950d8/mtd4.html
On completion I downloaded the BigMaq Toolbar.
At this point there were only 12 channels and all of them with no picture.
I clicked blue on the remote and clicked on tuxbox commander.
I then disabled the Auto update by clicking on camd_cfg then pressing 4. Inside I looked for AU clicked on the figure 01 and changed the figure to 00.
I exited after saving and did a full scan which brought back all the channels with still no pictures. I then went onto the BigMaq toolbar's to "latest Keys" and got the new codes for my area. Went back to tuxbox commander located softcam key, pressed 4. Inside this there were 8 lines of key code inputs. I deleted all but two of the inputs and then I inputed the new keys. Afterwards I saved, exited and clicked on reboot. After 3 punishing days its great to see the pictures again and I can even see a few new channels as well.
Once again thanks guys for all your assistance
|
|
Advertisement
|
 |
|
|
|
stegbhoy
Newbie
|
11. April 2008 @ 12:30 |
Link to this message
|
|
well done bille22 works perfect been at it all day so easy the way you put it cheers
|
|
billie22
Junior Member
|
11. April 2008 @ 12:37 |
Link to this message
|
Originally posted by stegbhoy:
well done bille22 works perfect been at it all day so easy the way you put it cheers
You are welcome (just to let you know I am in my mid 60's and a female)so if I could do it any one could!
Billie22
|
|
gsb104
Newbie
|
11. April 2008 @ 12:40 |
Link to this message
|
Originally posted by bryandir:
Originally posted by dtest:
so lads, i know its all well and good changing the code 3 times a day or what ever which i have done since it initially went off but tthe question is, do you think anyone will be able to make an image tht will emulate the correct codes instead of us having to change the codes all of the time? Cheers
im the same as this guy,its all well changing 3 times a day,entering the codes is "ok" but we all prefer the lazy option.
im not sure how long or if an image will even surface that can go with the codes,in my heart,i think if you want to continue on these boxes,you will need tomanually input the codes forever.
hi
do you think it is worth buying a starview 3 box and keeping the dbox just in case a new programme can't be found
im not sure if the dbox is capable of having an image as advanced as the one you need to continually change with the telepest keys changing.(speaking of which,my box has just went down (2:13pm)
i hear that the "starview 3" boxes were/are the only ones not affected were "thebox super" and maybe some starview ones...but i think they have some feature on them that can roll over when the keys change and decode them back to the box before they cut off...
oh well.....come on big maq...gives the new codes!!
|
|
gsb104
Newbie
|
11. April 2008 @ 12:44 |
Link to this message
|
hi
sorry i messed that message up
do you think its worth while buying a starview 3 box just in case a new image can't be found for the dbox
|
|
stegbhoy
Newbie
|
11. April 2008 @ 12:48 |
Link to this message
|
Originally posted by billie22:
Originally posted by stegbhoy:
well done bille22 works perfect been at it all day so easy the way you put it cheers
You are welcome (just to let you know I am in my mid 60's and a female)so if I could do it any one could!
lol if it happens again will look out for you feel as tho i should buy you flowers or so
steg_bhoy@hotmail.co.uk
|
|
toon316
Newbie
|
11. April 2008 @ 12:56 |
Link to this message
|
|
i have a silver digivox box i live in the north east off england and i have lost all of my chanels can any one help
|
|
diessel1
Suspended permanently
|
11. April 2008 @ 13:28 |
Link to this message
|
hi there, i have a sagem dbox. i put the new codes in and restart my box and i get the channel but when i change channel it goes off again and the codes go back to what they were.
can someone help me plz
thanks
|
|
bigclaret
Suspended due to non-functional email address
|
11. April 2008 @ 13:28 |
Link to this message
|
Originally posted by sean111:
OMG THANK YOU SOOOOOOO MUCH HENRY PAL!!!
Henry or anyone who can help,
do you have the virgin / ntl codes for the Blackburn / East Lancashire area please
stuart
|
|
oddogg
Newbie
|
11. April 2008 @ 13:48 |
Link to this message
|
|
guys i just got 2 sporters dboxes working in edinburgh using the blue keys etc but my boxs is commando and the dates on my keys say febuary 07 anybody any ideas im gutted i got my mates working and im siiting here wi bbc pish HELP HELP HELP m
|
|
stu2007
Junior Member
|
11. April 2008 @ 13:50 |
Link to this message
|
Hi peeps, i got a sagem dbox2 with blade image on it.
Was just wondering if anyone could point me in the right direction of changing the keys. I have read loads and loads during the past couple of days but everything i see is referenced to the nokia boxes :s.
Anyway, any help is greatly appreciated and thanks in advance guys :)
|
|
billie22
Junior Member
|
11. April 2008 @ 14:02 |
Link to this message
|
Originally posted by bigclaret:
Originally posted by sean111:
OMG THANK YOU SOOOOOOO MUCH HENRY PAL!!!
Henry or anyone who can help,
do you have the virgin / ntl codes for the Blackburn / East Lancashire area please
Hi pure ntl code is DB7E88CA37E39383 new + 8A6B4256D5E3831E on the 11 april 2008 8am and the VM/TW 6F9BA23250673657 on the 10 april 2008 16:30 for Edinburgh they my work for you give them a try,good luck
Billie22
|
|
keebe
Inactive
|
11. April 2008 @ 14:33 |
Link to this message
|
my nokia Dbox has gone off all the channels are gone and on the box itself it reads loading kernel anybody know why this has happened?
123
|
|
daguvnor
Newbie
|
11. April 2008 @ 15:09 |
Link to this message
|
To all those who dont already know: get the newbie guide from here then after you change the key(s),turn off auto-update (the guide will tell you how).If you cant find the keys just download BigMaq toolbar.I live in Teesside on VM and my box has been up for a few hours now (fingers crossed).
In reply to the user asking about Starview boxes,i have a Starview 'The Box' too and that has not gone off at all due to it having auto updates to roll over the new keys.
Hope this helps guys :)
|
|
daguvnor
Newbie
|
11. April 2008 @ 15:12 |
Link to this message
|
|
I forgot to mention:DO NOT rescan the channels as you will lose all your bouquets/favourites etc.Being the idiot i am i did it :(
|
|
oddogg
Newbie
|
11. April 2008 @ 15:29 |
Link to this message
|
|
billie i did what you said for to of my mates boxes they work im on commando and the date beside the key is 07 feb 2006 not april10 08 how do i fix that?????
|
|
JamJo
Newbie
|
11. April 2008 @ 15:44 |
Link to this message
|
Mine now works! Im with NTL/Virgin and it's been off for the past few days, thanks to this forum I've now fixed it, in appreciation I'll tell you all how. Here is what I did and I'm a total newbie: This took me 30 minutes with no prior knowledge of a dbox2.
(Note: I think my image is Sporster 1.73, not sure if this matters and I really don't know what an image is or how to change it, or even if I need to change it)
Note: Everything is done by the remote control on screen. I've pieced this together using bits of what other people have posted, it's not all my own but hopefully this may be easier to follow.
STEP 1: First press the blue button on the remote, choose Sportster (or blue button again), go to EMU settings (or blue button again) and choose EVOCAMD. Press green or go to EMU/Autoupdate. In grey it will tell you wether updates are activated or deactivated. Press yellow to deactivate if its not already deactivated. Press home x 3 back to the EMU selection screen, press red on the EVOCAMD to restart this.
STEP 2: You need to download software to your computer only. Do this by clicking the link and downloading/installing it to your computer: http://bigmaq.ourtoolbar.com/
This just adds a toolbar to your internet explorer. On the toolbar go to Latest Keys and choose your area, choose the latest date if more than 1 option and it will give you two codes which look like: KEY 0 (followed by digits) and KEY 1 (followed by digits). Make a note of these for the next step. This will hopefully tell you the code whichever area you live in.
STEP 3:
1 - press the blue button on your DBOX - and go to option 2 Tuxbox commander.
2- then scroll down to the option that says "var" and press ok
3- scroll down to "keys" and press ok
4- scroll down to "keylist.txt and press 4 (to edit)
5- If your like me and are in the Pure NTL area your codes will start like N 5401 01 etc etc, press ok on the 1st key which starts with N 5401 00
6 - Now use the codes you got from Biqmaq in step 2: Type in this number after 00 and the 01. i.e. overwrite the number after the 00 or 01 using your remote control. (it takes a while to get the knack of it).
7 - Press ok to exit then press home. It will ask you if you want to save, choose yes. Press home again and again save if asked until you are back to the normal screen.
Note: The screen will still be black at this point.
STEP 4:
Now press the blue button, go to Sportster (or blue button again), choose EMU SELECTION and press red or ok to restart the EVOCAMD, a confirmation message will be shown. Now your picture should appear. If not try to restart and then it should appear.
This is what I did and it worked for me. Good luck and many many thanks to everyone that helped me get my dbox working again. I really really appreciate it.
|
Senior Member
2 product reviews
|
11. April 2008 @ 15:47 |
Link to this message
|
|
any word on an image that auto updates codes on the dbox2. in ireland dublin.
This message has been edited since posting. Last time this message was edited on 11. April 2008 @ 15:49
|
|
billie22
Junior Member
|
11. April 2008 @ 16:06 |
Link to this message
|
Originally posted by oddogg:
billie i did what you said for to of my mates boxes they work im on commando and the date beside the key is 07 feb 2006 not april10 08 how do i fix that?????
not to sure about commando I would try changing date 10 April 08 see what happens,Good luck
Billie22
|
|
oddogg
Newbie
|
11. April 2008 @ 16:12 |
Link to this message
|
|
how do you turn auto update on and off
|
|
lockettb
Suspended due to non-functional email address
|
11. April 2008 @ 16:28 |
Link to this message
|
hi all i have got a nokia dbox and i got it a while ago as a spare. when i first got it i searched and all the channels came. next day all the channels were gone and no epg. tried reserch found nothing tried another image still no joy after searching i found the pining info for the tuner when i checked there was no voltage at pin 7 and pin 9 for the tuner. has any one got any ideas?
this was like this before the key changes.
cheers ben
|
|
ToriB
Newbie
|
11. April 2008 @ 16:37 |
Link to this message
|
I have just joined tonight and would greatly appreciate any help with codes for my Nokia digibox. I still have the EPG but a blue screen and no sound. Could billie22 please forward me the codes etc and stop me tearing my hair out? I live in North Lanarkshire Scotland. Thanks
|
|
ToriB
Newbie
|
11. April 2008 @ 16:41 |
Link to this message
|
I have just joined tonight and would greatly appreciate any help with codes for my Nokia digibox. I still have the EPG but a blue screen and no sound. Could billie22 please forward me the codes etc and stop me tearing my hair out?
|
|
dbox101
Newbie
|
11. April 2008 @ 16:45 |
Link to this message
|
Hi
Guys i am having trouble with the NOKIA DBOX all the freeview channels work but rest shows in the list but they dont work there is not picture they are all blank, I have tried to flash a new image but i am getting a Kein error however i have successfuly flashed images on my box in past, any suggestions on how to fix this problem and also if you can send me links to the useful tools to flash the DBOX will be appreciated.
|
|
Advertisement
|
|
|
|
Ultim81
Junior Member
|
11. April 2008 @ 16:54 |
Link to this message
|
|
Guys there is a fix on the way it will be released tomorow fingers crossed.
|
