|
Dbox In Ireland
|
|
|
obiandy
Newbie
|
21. November 2007 @ 06:17 |
Link to this message
|
|
Thanks Al, will try it tonight and see how it turns out
|
|
Advertisement
|
 |
|
|
|
rua11
Junior Member
|
21. November 2007 @ 13:35 |
Link to this message
|
Originally posted by mgb17:
A dream 500t clone would also do the job. The frequency range starts at 506.000 mhz in Kilkenny and the gap at 266.000 mhz at some clone 500t tuners doesn't matter.
Now looking seriously at a Dreambox 500T clone from one of Jimme's links to dreamboxmagic. Very reasonable and seems to solve the problem of Ch0rus MMDS issues in Kilkenny. They only sell the hardware though so I will need to flash a correct image etc.. for Kilkenny. Anyone got any ideas of where to get this? If I flash the image, can I then just run a service scan to pick up channels or will I need more software? Thanks!
|
|
EC74
Junior Member
|
21. November 2007 @ 16:27 |
Link to this message
|
|
Hey folks,
Got the Blade Trinity CANNOT get it flashed, removed previous Sporster, Trinity wouldnt go on but no problem flashing the Sporster back on to it-
Sporster one driving us all insane Stalling regular enough - Any suggestion?
I'm N*L Dublin
Cheers
|
|
ruprect
Senior Member
|
22. November 2007 @ 04:31 |
Link to this message
|
Originally posted by EC74:
Hey folks,
Got the Blade Trinity CANNOT get it flashed, removed previous Sporster, Trinity wouldnt go on but no problem flashing the Sporster back on to it-
Sporster one driving us all insane Stalling regular enough - Any suggestion?
I'm N*L Dublin
Try another blade, there are around 10 versions out there by now. try IFA and FTP methods too.
This message has been edited since posting. Last time this message was edited on 22. November 2007 @ 04:31
|
|
scaniaguy
Suspended due to non-functional email address
|
23. November 2007 @ 05:26 |
Link to this message
|
Appreciate all the info on dreambox 500c in chorus land here in cork. tried all advice, even plugging in to a paid subscribers connection. Still getting nowhere. Am about to give up.
To finalise Got box thrugh the mail plugged it in ,the rest is history. SHOULD I HAVE ORDERED SOFTWARE OR A SMART CARD TO SLOT INTO THE FRONT OF the BOX. ANY ideas as to what I am missing???
|
|
glic83
Member
2 product reviews
|
23. November 2007 @ 06:03 |
Link to this message
|
frist of all make sure youre not mmds as the 500C is no good on mmds you need either a 500t or 600t if mmds,you need to put an image on the box my prefered image is digital worldz 2.0 you can get it here it has everything you need in the image keys, cams and the irish cables files,just use dream up to flash it and away you go
|
|
wcoakley
Newbie
|
23. November 2007 @ 08:06 |
Link to this message
|
|
Hey.
I have noticed a few channels have gone such as ABC1 and im thinking of doing a re-scan, is this wise,will i loose channels.
Help much appreicated?
|
|
glic83
Member
2 product reviews
|
23. November 2007 @ 09:12 |
Link to this message
|
|
disney dont transmit abc 1 anymore there has been a few channels taken off the line up but will be replaced,vigin 1 is one of the new channels in the line up
|
|
obiandy
Newbie
|
23. November 2007 @ 14:14 |
Link to this message
|
Sorry to ask but how can i get to scan under nokia dbox2 setting of sym6875, i can not find in the service scan menu and all the other settings don't result in any channels.I am in the swords area and nearly sure i'm on chorus cable. Any adive would be appreciated. Using Sportstar 2X 1.7 image
|
Member
|
23. November 2007 @ 15:20 |
Link to this message
|
Originally posted by obiandy:
Sorry to ask but how can i get to scan under nokia dbox2 setting of sym6875, i can not find in the service scan menu and all the other settings don't result in any channels.I am in the swords area and nearly sure i'm on chorus cable. Any adive would be appreciated. Using Sportstar 2X 1.7 image
Load the cables.xml file that is around here somewhere and that will let you select chorus for the scan....Hope this helps.
Al
|
Member
|
23. November 2007 @ 15:25 |
Link to this message
|
Originally posted by alanbk1:
Originally posted by obiandy:
Sorry to ask but how can i get to scan under nokia dbox2 setting of sym6875, i can not find in the service scan menu and all the other settings don't result in any channels.I am in the swords area and nearly sure i'm on chorus cable. Any adive would be appreciated. Using Sportstar 2X 1.7 image
Load the cables.xml file that is around here somewhere and that will let you select chorus for the scan....Hope this helps.
I have uploaded the file for you here:
http://rapidshare.com/files/71788882/irish10.zip.html
Place the cables.xml file in var/tuxbox/config/zapit.Delete scan.cfg if there also.Plug out box and then plug in again....
Al
|
|
htctytn
Suspended due to non-functional email address
|
24. November 2007 @ 05:47 |
Link to this message
|
Hi,
I have a Sagem with Commando 8.2 image. I haven't used it in a while but this morning when I used it all of the channels are freezing. They are all there but when you select a channel the picture freezes and might move every 5 seconds or so.
Has something happened recently that I missed or don't know about? Is there an update or something else I need to do to resolve this?
Cheers,
Paul
|
|
htctytn
Suspended due to non-functional email address
|
24. November 2007 @ 10:21 |
Link to this message
|
|
Its okay.... Panic over.... Everything seems to be back to normal.
|
|
eoinf
Junior Member
|
25. November 2007 @ 18:29 |
Link to this message
|
HI
I am having a couple of problems i was hoping someone could help me with.
I flashed blade onto my box but i cant seem to get access to any of the folders using ftp software or windows explorer. do i need to change some setting to view/read/write files.
because of the ptoblem i cant seem to upload the files (cables keys etc) so i decided to revert back to my backed-up image.
but now the image flashingassistent wont flash the old imgage.
it keeps stalling during the flash with the below in the command box
Quote:
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial
Select (1-3), other keys to stop autoboot: 0
'bootd' recursion detected
dbox2-ppcboot>
can anyone help. im stuck with a box i cant seem to do anything with. i am willing to give blade a shot but i cant seem to get the files over
|
|
eoinf
Junior Member
|
25. November 2007 @ 19:12 |
Link to this message
|
Originally posted by eoinf:
HI
I am having a couple of problems i was hoping someone could help me with.
I flashed blade onto my box but i cant seem to get access to any of the folders using ftp software or windows explorer. do i need to change some setting to view/read/write files.
because of the ptoblem i cant seem to upload the files (cables keys etc) so i decided to revert back to my backed-up image.
but now the image flashingassistent wont flash the old imgage.
it keeps stalling during the flash with the below in the command box
Quote:
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial
Select (1-3), other keys to stop autoboot: 0
'bootd' recursion detected
dbox2-ppcboot>
can anyone help. im stuck with a box i cant seem to do anything with. i am willing to give blade a shot but i cant seem to get the files over
ok got it sorted i was able to put my old image onto the box using filezilla and reprogramme.
very strange why ifa wouldnt work. anyone any ideas
ps if i did want to go back to blade( as i have heard it is more stable) if i reflash what files do i need to put onto the box to have my channels as they were with sportster
cheers
eoin
|
|
glic83
Member
2 product reviews
|
25. November 2007 @ 19:52 |
Link to this message
|
|
flash it with blade then when you have that up and running put the services.xml from the sportster image on to blade if you have your bouquets set the same applies for this file
|
|
wcoakley
Newbie
|
28. November 2007 @ 12:15 |
Link to this message
|
|
just re-scanned lastnight didnt pick up virgin at all.
whats the most channels that you can get im up to 150
|
|
razo100
Newbie
|
28. November 2007 @ 13:20 |
Link to this message
|
|
hi guys. just got a dreambox 500t. just wondering if there is any other way to flash an image onto it without a null modem cable?just dont have the patience to wait for the cable to arrive. the image i am flashing is D2.0 and i was going to use dreamup software.thanks.
|
|
rickrust
Junior Member
|
29. November 2007 @ 18:50 |
Link to this message
|
Originally posted by Jimme:
Hi all. I?ve recently set-up a dreambox to pick-up Ch0ru$ MMDS. While it wasn?t too straight forward I received great advice from some of you guys on this forum which made it very worthwhile. So I?m back with a few more questions!
I?m now planning to set up a box for my brother. He has a ch0ru$ coaxial cable which feeds into his house, but it has not been used since the old analogue black boxes were around. As he doesn?t have a subscription from ch0ru$ will they know if he is tapping into their signal (i.e. does he need to subscribe to a basic package to get away with it)? Also, what is the most reliable box for ch0ru$ (cable) in the Cork area?
Hi I'm Thinking of getting a dream box 500c will it work with cable ntl/chorus in Ireland
|
|
srevor
Junior Member
|
30. November 2007 @ 05:26 |
Link to this message
|
|
Does anyone know if the hatton mayweather fight on sly sports box office is being shown by NThelL in Ireland? If so, how can i get it on my dbox?
|
|
eoinf
Junior Member
|
30. November 2007 @ 05:32 |
Link to this message
|
|
yeah its on PPV. Should be able to get it on the dbox. i think it would be the same channel that was showing the wrestling PPV not too long ago.
Might also be on the now redundant prem plus channel
|
|
srevor
Junior Member
|
30. November 2007 @ 06:00 |
Link to this message
|
Originally posted by eoinf:
yeah its on PPV. Should be able to get it on the dbox. i think it would be the same channel that was showing the wrestling PPV not too long ago.
Cheers Eoinf,
Might also be on the now redundant prem plus channel
So will i just do a scan when it starts broadcasting? i'm using mgb17's irish10.xml
This message has been edited since posting. Last time this message was edited on 30. November 2007 @ 06:02
|
|
bluffer
Junior Member
1 product review
|
2. December 2007 @ 10:44 |
Link to this message
|
|
Hi I have Dbox2 on NTHell Dublin running about a year now, suddenly it is not showing any chanels, everything seems ok done a new scan but no joy no errors showing. I am on Sportster 1.7 I think.
Any suggestions.
|
|
glic83
Member
2 product reviews
|
2. December 2007 @ 11:39 |
Link to this message
|
|
did you try changing the cam?
|
|
Advertisement
|
|
|
|
bluffer
Junior Member
1 product review
|
2. December 2007 @ 11:50 |
Link to this message
|
|
Sorry I should have said I am a complete thick regarding these machines, what is the cam and where do I find it.
|
