|
I can't copy The Dark Knight
|
|
Senior Member
|
17. December 2008 @ 21:50 |
Link to this message
|
I love Anydvd and can vouch for this super program !
:)
Jo
Life is Grand !
 |
|
Advertisement
|
|
|
|
|
BHOWARD64
Newbie
|
18. December 2008 @ 00:57 |
Link to this message
|
I was able to to rip it easily. Used dvdfab plat with 43 for free runnning in the background. did not dis able the 43. ripped just find for me. rip to a single layer dvd.
|
|
trutxn78
Newbie
|
18. December 2008 @ 01:50 |
Link to this message
|
|
I appreciate all the help that I recieved thank you I finally was able to get it to work had to unistall dvdfab and download again of course after running virus scans and what not to insure the previous wasnt a virus, anywho i got it to work thank you for your input..
|
|
tinner45
Member
|
18. December 2008 @ 09:56 |
Link to this message
|
I've been backing up for a long time, tried using anydvd, didn't like it but dummy me,I didn't know anydvd also rips it by right clicking it until I read it on this thread. thanks for the info.
|
AfterDawn Addict
|
18. December 2008 @ 15:47 |
Link to this message
|
@tinner45
What's not to like about anyDVD? Fabulous program and from the sound of your post, the reason you were able to get TDK done! JM2C
|
|
mjcharbo
Newbie
|
18. December 2008 @ 21:29 |
Link to this message
|
|
Did anyone's back up happen to contain a few glitches? Like when the Joker is walking in the kitchen room where all those mob guys are talking to the Chinese guy on tv, there is a small glitch for like a second....
thanks
|
|
mcelano83
Junior Member
|
18. December 2008 @ 21:30 |
Link to this message
|
Ok... this reply is mostly for 7thsinger... but I tried cleaning my computer out with Ccleaner and uninstalling and reinstalling Dvd Fab 5.2.2.0. I tried ripping Dark Knight with that and CSS Region running in the background, and it still freezes up the software and causes it to shut down. And AnyDvd I ran out of time on the free trial.. If anyone else can help, can they please? Is it worth buying the AnyDvd software just to try it?? Unless if someone else has another idea for how I can rip Dark Knight. Besides Fab... Dvd Decrypter, Rip it 4 Me, and Shrink all didn't work either...
Thanks
|
AfterDawn Addict
|
18. December 2008 @ 21:48 |
Link to this message
|
are you sure the DVD is completely clean? and without any fingerprints etc.? if it is then i would say you're drive/burner is the problem. some ODDs read DVDs better than others so anydvd would probably not help TDK was not that heavily protected at all
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
|
|
sytyguy
Senior Member
|
18. December 2008 @ 21:59 |
Link to this message
|
Originally posted by mcelano83:
And AnyDvd I ran out of time on the free trial.. If anyone else can help, can they please? Is it worth buying the AnyDvd software just to try it?? Thanks
Best to purchase it now, because shortly they will start charging for yearly updates, and I believe, they still are free for a short period of time
And yes, it is more than worth it.
|
AfterDawn Addict
|
19. December 2008 @ 01:39 |
Link to this message
|
EDITED: sorry for a little off topic.
Honestly, I find it hard to believe that few (people) are haven't so much issue trying to rip and backup "TDK and Wall-E". These two movies shouldn't be hard at all, both DVDFab HD Decrypter and AnyDVD should be able to handle/rip these two beast flawlessly.
I've tested both of my backups (TDK & Wall-E) and they're absolutely beautiful. Is it just me or is there any one else with me? No hard feeling here, but I'm sorta tired of trying to explain every single details to successfully ripped and burned when there are instructions and guides already provided. Everyone here on board, should have learned/known that DVDFab HD Decrypter (Platinum) and AnyDVD are the only 2 best rippers at the moment. That being said, if you've updated (got the latest version) and still can't rip, then it is obvious that you've got a "bad pressed" and or maybe it's best to "read more guides".
I'm done with TDK and Wall-E. Moving on to the next chapter with more challenging stuff to play with.
Good luck to all and happy burning.
======================================================================
Quote:
<><><><><><> 10 days ago <><><><><><><><><>
Info for drive [E:\] (DVDFab HD Decrypter 5.2.0.5)
Drive region: 1
Disc type: Video DVD
Disc region: 1, 4
Volume name: THE_DARK_NIGHT
Video standard: NTSC
Layer 0 size: 1985200 sectors (3877 MBytes)
Layer 1 size: 1985200 sectors (3877 MBytes)
CSS (Content Scramble System) protection is removed!
RC (Region Code) protection is removed!
RCE (Region Code Enhancement) protection is removed!
APS (Analog Protection System) protection is removed!
UOPs (User Operation Prohobitions) protection is removed!
Invalid PTTs protection is not found.
Invalid PGCIs protection is not found.
Invalid PGCs protection is not found.
Invalid TMAPs protection is not found.
Invalid CELLs protection is removed!
Invalid VOBUs protection is not found.
Fake vts protection is not found!
Potential bad sector (vts:1 title begin:0 end:1343) is removed!
Potential bad sector (vts:1 title begin:1360 end:13765) is removed!
2 potential bad sector protections are removed!
Structure protection (ARccOS, RipGuard, etc.) is removed!
PathPlayer is enabled!
Unplayable cell (vts:1 title pgc:1 cell:2) is removed!
Unplayable cell (vts:1 title pgc:1 cell:3) is removed!
Unplayable cell (vts:1 title pgc:1 cell:4) is removed!
Unplayable cell (vts:1 title pgc:1 cell:5) is removed!
Unplayable cell (vts:1 title pgc:1 cell:6) is removed!
Unplayable cell (vts:1 title pgc:1 cell:7) is removed!
Unplayable cell (vts:1 title pgc:1 cell:8) is removed!
Unplayable cell (vts:1 title pgc:5 cell:1) is removed!
Unplayable cell (vts:1 title pgc:5 cell:2) is removed!
Unplayable cell (vts:3 title pgc:2 cell:1) is removed!
Unplayable cell (vts:4 title pgc:1 cell:1) is removed!
11 unplayable cells are removed!
=======================================================================
DVDFab HD Decrypter 5205 ripped this beast within 13 mins flawlessly.
Good luck to all.
This message has been edited since posting. Last time this message was edited on 19. December 2008 @ 08:16
|
|
mcelano83
Junior Member
|
19. December 2008 @ 01:41 |
Link to this message
|
Interesting. So it could be my drive... However, if it was the drive, would that seriously be a cause for the software to freeze up and crash? To me that sounds like the software can't even analyze and open the disc to rip... b/c of encryptions... I mean, in the other softwares, such as Dvd Decrypter or Rip It 4 Me, it recognizes the disc at least, but it doesn't rip past VTS_05... That's where it freezes. Honestly, this is the FIRST movie I've ever had this difficult of a time with... I don't think it's the drive... I may purchase AnyDvd since Fab 5.2.2.0 does NOT work for me. And Rip It 4 Me I'm surprised, that software never failed me... it's definately a heavy duty encryption...
|
AfterDawn Addict
|
19. December 2008 @ 08:03 |
Link to this message
|
@mcelano83
Buy AnyDVD-you'll never regret it. On sale now.
@alkohol
Quote:
Is it just me or is there any one else with me?
No it's not just you. I pointed out that the amateurs were run amok in this thread somewhere back and someone clobbered me for that statement. I'll stick by it. If you can't back up TDK with updated Fab or Any then something is wrong with your pc, other software, or the disc itself.
|
Moderator
|
19. December 2008 @ 08:13 |
Link to this message
|
Originally posted by garmoon:
If you can't back up TDK with updated Fab or Any then something is wrong with your pc, other software, or the disc itself.
No arguments from me, just like any movie, all that's needed is a healthy set of software and hardware, plus a good dose of reading before posting.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
AfterDawn Addict
|
19. December 2008 @ 08:13 |
Link to this message
|
Originally posted by garmoon:
No it's not just you. I pointed out that the amateurs were run amok in this thread somewhere back and someone clobbered me for that statement. I'll stick by it. If you can't back up TDK with updated Fab or Any then something is wrong with your pc, other software, or the disc itself.
I agree.
|
AfterDawn Addict
3 product reviews
|
19. December 2008 @ 09:41 |
Link to this message
|
Originally posted by alkohol:
Originally posted by garmoon:
No it's not just you. I pointed out that the amateurs were run amok in this thread somewhere back and someone clobbered me for that statement. I'll stick by it. If you can't back up TDK with updated Fab or Any then something is wrong with your pc, other software, or the disc itself.
I agree.
I third.
|
AfterDawn Addict
|
19. December 2008 @ 10:18 |
Link to this message
|
|
mcelano83, what are the specs of your PC ? drive model? etc
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
|
|
mcelano83
Junior Member
|
19. December 2008 @ 10:25 |
Link to this message
|
Well I'm working with a Dell Inspiron 1150 laptop. My D Drive just says that it's DVD+RW on it... that's about it. What other kind of specs were you looking for? I'm not 100% sure if it is the drive, because in Dvd Decrypter it reads and recognizes The Dark Knight disc...it just freezes when it gets to VTS05; however in Rip It 4 Me and DvdFab 5.2 it doesn't load at all. I feel it's an encryption thing that my softwares are having troubles with. It could very well be just this particular copy of TDK... and maybe I need another copy of the movie to try it... thank you for your help...
|
AfterDawn Addict
|
19. December 2008 @ 10:47 |
Link to this message
|
if you try another copy of the movie and have the same problem my bet it is the drive
laptops are your worse choice backing up DVDs
custom built machine (the best)I never have any trouble backing up anything per my specs.
box systems dell.hp etc. (just ok)
laptops (not so good)
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
|
Senior Member
|
19. December 2008 @ 11:25 |
Link to this message
|
|
I can vouch for the unreliability of laptop drives, as I had one fail on me and had to get it replaced.
I now rarely rip/burn using my laptop. I have an external drive I use, or I just use my desktop for the movie.
|
Moderator
|
19. December 2008 @ 11:35 |
Link to this message
|
|
My laptop drive is still ripping & burning as well as when it was new nearly 4yrs ago, however laptop drives do generally seem to be flimsy things; i always keep a load of external ripper and burner drives to hand just in case.
I suspect mcelano83's drive just isn't up to the job, maybe she can borrow an external drive off someone, or better still buy a cheap one to use for all future ripping duties.. it would seem that there's nothing too difficult posed by The Dark Knight judging by all the pages of success in this thread..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 19. December 2008 @ 11:37
|
AfterDawn Addict
|
19. December 2008 @ 11:38 |
Link to this message
|
|
yes if you are going to rip/burn DVDs with a laptop you need a external ODD
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
|
|
mcelano83
Junior Member
|
20. December 2008 @ 03:36 |
Link to this message
|
|
What is an external ODD? How much do they generally cost??
|
|
dr_ml422
Senior Member
|
20. December 2008 @ 03:55 |
Link to this message
|
|
external optical disc drive>aka burner
SAMSUNG SH-S203B, SAMSUNG SH-S223F, SAMSUNG SH-S202J, PIONEER DVR 112D
Common Sense Aint Too Common Anymore.
|
|
sytyguy
Senior Member
|
20. December 2008 @ 05:36 |
Link to this message
|
|
|
|
Advertisement
|
|
|
|
Iamcdn
Suspended due to non-functional email address
|
20. December 2008 @ 09:06 |
Link to this message
|
|
I am just a junior on this board and enough already. Do as I have done in the past. Listen to the wise men such as alkohol and the other seniors. If nothing else works on TDK then it is time for a new computer upgrade. All the best my friends.
|
