|
|
|
Nero 9 Burn process failed
|
|
|
Scofield9
Newbie
|
9. March 2010 @ 10:11 |
Link to this message
|
Hello, I'm not sure if this is were I'm supposed to be posting this, I just joined a few minutes ago. On to my question, I'm using Nero 9 and whenever I try to burn a DVD it always says "Burn process failed" Before this however my DVD writer/burner couldn't read the Memorex DVD+Rs I have.
I read elsewhere on here that a firmware update was needed. I then downloaded and applied the firmware update hoping this would fix my issue. My DVD burner still has trouble reading those DVD's. After a few tries of opening and shutting the tray Nero sees the DVD.
I then added what I wanted to burn using Nero Express, then click burn. It started to burn at 4x.
So after a few seconds the DVD burner tray opens and Nero says "Burn process failed" I am going to attach the log file below....Note my burner is the GSA 4082B drive which I updated from firmware A201 to A208 which is the latest for my drive.
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 9.4.26.100
Internal Version: 9, 4, 26, 100
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4082B>Version: A208 - HA 1 TA 0 - 9.4.26.100
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data
CD-ROM: <SAMSUNG CDRW/DVD SM-352F>Version: T902 - HA 1 TA 1 - 9.4.26.100
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-55JKA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3120213A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CDRW/DVD SM-352F atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4082B D: CdRom0
SAMSUNG CDRW/DVD SM-352F E: CdRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2096624kB)
Free physical memory: 1549MB (1586276kB)
Memory in use : 24 %
Uncached PFiles: 0x0
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.3.2010
ISO compilation
11:00:44 PM #1 Text 0 File SCSIPTICommands.cpp, Line 430
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
11:00:45 PM #2 Text 0 File Isodoc.cpp, Line 6998
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
11:00:45 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3327
First writeable address = 0 (0x00000000)
11:00:45 PM #4 Text 0 File Burncd.cpp, Line 3572
Turn on Disc-At-Once, using DVD media
11:00:45 PM #5 Text 0 File DlgWaitCD.cpp, Line 313
Last possible write address on media: 2295103
Last address to be written: 745039
11:00:45 PM #6 Text 0 File DlgWaitCD.cpp, Line 325
Write in overburning mode: NO (enabled: CD DVD)
11:00:45 PM #7 Text 0 File DlgWaitCD.cpp, Line 2843
Recorder: HL-DT-ST DVDRAM GSA-4082B, Media type: DVD+R
Disc Manufacturer ID: <CMC MAG>, Media Type ID: <M01>, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
11:00:45 PM #8 Text 0 File DlgWaitCD.cpp, Line 500
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:00:45 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 739
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 745040 (745040) = #745040/165:33.65
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 745040 blocks [D: HL-DT-ST DVDRAM GSA-4082B]
--------------------------------------------------------------
11:00:45 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 941
Prepare [D: HL-DT-ST DVDRAM GSA-4082B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1525841920, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 745040 | 0 | 0x00
745040 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
11:00:45 PM #11 Text 0 File SCSIPTICommands.cpp, Line 217
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
11:00:45 PM #12 Text 0 File Burncd.cpp, Line 4279
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
11:00:45 PM #13 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started
11:04:23 PM #14 Text 0 File Burncd.cpp, Line 4401
Cache writing successful.
11:04:23 PM #15 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed
11:04:23 PM #16 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 4x (5,540 KB/s)
11:04:23 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2695
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:04:23 PM #18 Text 0 File Cdrdrv.cpp, Line 10282
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: M01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..783]:
00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8
23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
01 00 38 38 00 1D 62 35 - 07 30 22 10 08 20 1C 01 ..88..b5.0".....
00 00 00 1D 62 35 07 30 - 22 10 08 20 1C 01 00 00 ....b5.0".......
02 00 54 70 02 38 5F 56 - 20 14 0B 0B 01 18 00 00 ..Tp.8_V........
00 00 02 3D 5D 7A 20 14 - 0C 0A 01 18 00 00 00 10 ...=]z..........
03 00 54 DF 02 1F 65 5A - 20 14 0C 0A 01 18 00 00 ..T...eZ........
00 00 02 06 67 86 20 14 - 0C 0A 01 18 00 00 00 89 ....g...........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00
11:04:23 PM #19 Text 0 File DVDPlusRW.cpp, Line 637
Start write address at LBA 0
DVD high compatibility mode: Yes
11:04:23 PM #20 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800
11:04:43 PM #21 SPTI -1135 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
CDB Data: 0x2A 00 00 00 02 60 00 00 20 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
Sense Area: 0x70 00 03 00 00 00 00 10 35 2D 03 0E 0C
Buffer x0a190500: Len x10000
0xFD FF 75 00 02 D4 C0 6A 8A EC BF C9 EA 44 15 7C
0xEB B3 9E BB 51 2A E2 31 D8 8D 76 48 CE 58 2D 00
0xFA 13 69 91 2D 32 AA BA FC A1 B4 C4 A4 8B 5A 19
11:04:43 PM #22 CDR -1135 File Writer.cpp, Line 306
Write error
D: HL-DT-ST DVDRAM GSA-4082B
11:04:43 PM #23 SPTI -1135 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
Sense Area: 0x71 00 03 00 00 00 00 10 35 2D 03 0E 0C
11:04:43 PM #24 Phase 127 File dlgbrnst.cpp, Line 1767
Generating DVD high compatibility borders
11:04:43 PM #25 Text 0 File DVDPlusRW.cpp, Line 904
EndDAO: Last written address 608
11:04:43 PM #26 CDR -1135 File WriterStatus.cpp, Line 292
Write error
D: HL-DT-ST DVDRAM GSA-4082B
11:04:43 PM #27 TRANSFER -24 File WriterStatus.cpp, Line 292
Could not perform end of Disc-at-once
11:04:43 PM #28 Text 0 File DVDPlusDualLayer.cpp, Line 1452
SetDriveCaps: Set LAST LBA of layer 1 to 0
11:04:43 PM #29 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 4x (5,540 KB/s)
11:04:43 PM #30 Text 0 File SCSIPTICommands.cpp, Line 267
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
11:04:47 PM #31 Text 0 File Cdrdrv.cpp, Line 11592
DriveLocker: UnLockVolume completed
11:04:47 PM #32 Text 0 File SCSIPTICommands.cpp, Line 430
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Thanks for any assistance!
~Chris
|
AfterDawn Addict
|
9. March 2010 @ 15:44 |
Link to this message
|
You could try burning with ImgBurn (save the output from Nero to the HDD).
Quote:
Disc Manufacturer ID: CMC.MAG.
Media type ID: M01
Consider using Verbatim disks instead of the CMC (Memorex) - and get something other than the Verbatim 'Value Series'.
|
|
Scofield9
Newbie
|
10. March 2010 @ 10:46 |
Link to this message
|
Thanks I'll give it a try. Oh and it seems I've fixed the issue were the drive wouldn't see the DVDs. I had to go into Windows Explorer and right click on the drive and I clicked the checkbox that said "Enable CD recording on this drive.
Now Nero see's the DVD's but the burn process still fails. I actually tried to burn less data this morning and got a "PMA" error. I'll post the log below...
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 9.4.26.100
Internal Version: 9, 4, 26, 100
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4082B>Version: A208 - HA 1 TA 0 - 9.4.26.100
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data
CD-ROM: <SAMSUNG CDRW/DVD SM-352F>Version: T902 - HA 1 TA 1 - 9.4.26.100
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-55JKA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3120213A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CDRW/DVD SM-352F atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4082B D: CdRom0
SAMSUNG CDRW/DVD SM-352F E: CdRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2096624kB)
Free physical memory: 1333MB (1365840kB)
Memory in use : 34 %
Uncached PFiles: 0x0
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.3.2010
ISO compilation
10:24:15 AM #1 Text 0 File SCSIPTICommands.cpp, Line 430
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
10:24:15 AM #2 Text 0 File Isodoc.cpp, Line 6998
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
10:24:15 AM #3 ISO9660GEN -11 File Geniso.cpp, Line 3327
First writeable address = 0 (0x00000000)
10:24:15 AM #4 Text 0 File Burncd.cpp, Line 3572
Turn on Disc-At-Once, using DVD media
10:24:15 AM #5 Text 0 File DlgWaitCD.cpp, Line 313
Last possible write address on media: 2295103
Last address to be written: 28431
10:24:15 AM #6 Text 0 File DlgWaitCD.cpp, Line 325
Write in overburning mode: NO (enabled: CD DVD)
10:24:16 AM #7 Text 0 File DlgWaitCD.cpp, Line 2843
Recorder: HL-DT-ST DVDRAM GSA-4082B, Media type: DVD+R
Disc Manufacturer ID: <CMC MAG>, Media Type ID: <M01>, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
10:24:16 AM #8 Text 0 File DlgWaitCD.cpp, Line 500
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:24:16 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 739
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 28432 (28432) = #28432/6:19.7
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 28432 blocks [D: HL-DT-ST DVDRAM GSA-4082B]
--------------------------------------------------------------
10:24:16 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 941
Prepare [D: HL-DT-ST DVDRAM GSA-4082B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 58228736, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 28432 | 0 | 0x00
28432 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
10:24:16 AM #11 Text 0 File SCSIPTICommands.cpp, Line 217
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
10:24:16 AM #12 Text 0 File Burncd.cpp, Line 4279
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
10:24:16 AM #13 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started
10:24:25 AM #14 Text 0 File Burncd.cpp, Line 4401
Cache writing successful.
10:24:25 AM #15 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed
10:24:25 AM #16 Phase 28 File dlgbrnst.cpp, Line 1767
Speed measurement started
10:24:25 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2695
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:24:25 AM #18 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 590400
10:24:25 AM #19 Text 0 File WriterStatus.cpp, Line 245
<D: HL-DT-ST DVDRAM GSA-4082B> start writing Lead-Out at LBA 28432 (6F10h), length 0 blocks
10:24:25 AM #20 Phase 29 File dlgbrnst.cpp, Line 1716
Speed measurement completed: 125.6x (173,364 KB/s)
10:24:25 AM #21 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 4x (5,540 KB/s)
10:24:25 AM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2695
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:24:25 AM #23 Text 0 File Cdrdrv.cpp, Line 10282
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: M01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..783]:
00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8
23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
01 00 38 38 00 1D 62 35 - 07 30 22 10 08 20 1C 01 ..88..b5.0".....
00 00 00 1D 62 35 07 30 - 22 10 08 20 1C 01 00 00 ....b5.0".......
02 00 54 70 02 38 5F 56 - 20 14 0B 0B 01 18 00 00 ..Tp.8_V........
00 00 02 3D 5D 7A 20 14 - 0C 0A 01 18 00 00 00 10 ...=]z..........
03 00 54 DF 02 1F 65 5A - 20 14 0C 0A 01 18 00 00 ..T...eZ........
00 00 02 06 67 86 20 14 - 0C 0A 01 18 00 00 00 89 ....g...........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00
10:24:25 AM #24 Text 0 File DVDPlusRW.cpp, Line 637
Start write address at LBA 0
DVD high compatibility mode: Yes
10:24:25 AM #25 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800
10:24:57 AM #26 Text 0 File WriterStatus.cpp, Line 245
<D: HL-DT-ST DVDRAM GSA-4082B> start writing Lead-Out at LBA 28432 (6F10h), length 0 blocks
10:25:30 AM #27 SPTI -1194 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1194)
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
Sense Area: 0x71 00 03 00 00 00 00 10 35 20 03 0E 73 04
10:25:30 AM #28 Phase 127 File dlgbrnst.cpp, Line 1767
Generating DVD high compatibility borders
10:25:36 AM #29 Text 0 File DVDPlusRW.cpp, Line 904
EndDAO: Last written address 28432
10:25:36 AM #30 CDR -1194 File ThreadedTransferInterface.cpp, Line 1837
PMA update failure
D: HL-DT-ST DVDRAM GSA-4082B
10:25:36 AM #31 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1837
Could not perform end of Disc-at-once
10:25:36 AM #32 Text 0 File DVDPlusDualLayer.cpp, Line 1452
SetDriveCaps: Set LAST LBA of layer 1 to 0
10:25:36 AM #33 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 4x (5,540 KB/s)
10:25:36 AM #34 Text 0 File SCSIPTICommands.cpp, Line 267
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
10:26:03 AM #35 Text 0 File Cdrdrv.cpp, Line 11592
DriveLocker: UnLockVolume completed
10:26:03 AM #36 Text 0 File SCSIPTICommands.cpp, Line 430
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Thanks for the help thus far!
EDIT: Just tried burning with img burn. I got an error....
I/O Error!
Device [1:0:0] HL-DT-ST DVDRAM GSA 4082B A208 (D:)(ATA)
Scsi Status 0x02
Interpretation: Check Condition
CDB: 2A 00 00 02 60 00 00 20 00
Interpretaion: Write (10) - Sectors: 608 - 639
Sense Area: 70 00 03 00 00 00 00 10 35 2D 03 0E 0C 00 00 00 00 00
Interpretaion: Write Error
The next error I got was...
Synchronise Cache Failed!
Device: [1:0:0]HL-DT-ST DVDRAM GSA 4082B A208 (D:)(ATA)
Reason: Program Memory Area Update Failure
NOTE that's the error I got in Nero [PMA Update failure]
EDIT, just went to 2 stores, they didn't sell any of those discs. I just seen FujiFilm and Maxell ones.
~Chris
This message has been edited since posting. Last time this message was edited on 10. March 2010 @ 15:33
|
|
Advertisement
|
|
|
|
sherarda
Suspended permanently
|
7. April 2010 @ 01:06 |
Link to this message
|
|
SPAM removed
This message has been edited since posting. Last time this message was edited on 7. April 2010 @ 13:18
|
|
