|
|
|
Burner Won't Recognize Blank DVD-R Discs
|
|
|
laddyboy
AfterDawn Addict
|
17. December 2006 @ 13:13 |
Link to this message
|
@ bluewhits
What program is giving this error message? Is this coming when you attempt to burn a disk? Are you sure you have the same model burner as the previous member? Did you get a message saying the firmware update was successful? If the firmware updating utility gave the error message, you may not have the same model burner.
Any number of programs can ID your drive if you don't know the model number.
DVD Identifier: http://dvd.identifier.cdfreaks.com
ImgBurn: http://www.imgburn.com
Nero InfoTool
etc.
|
|
Advertisement
|
|
|
|
|
suu
Newbie
|
17. December 2006 @ 14:43 |
Link to this message
|
Originally posted by laddyboy:
I'm not familiar with the programs you're using. As for why the current transfer mode is listed as not applicable, it may be due to using a different controller other than the standard controller or it may be the IDE channels need resetting. It won't hurt to do the latter so here are the steps:
- right click on My Computer and select Properties.
- Click the Hardware tab and then the Device Manager button.
- Click the "+" symbol beside IDE ATA/ATAPI Controllers.
- Right click on the Primary IDE Channel and select Uninstall.
- Right click on the Secondary IDE Channel and select Uninstall.
- While you're here in Device Manager, uninstall your burner again by right clicking on its name under DVD/CDROM Drives and selecting Uninstall.
- Restart your system.
Try using Ripit4me to backup commercial DVDs and see if that works better for you. It's free.
Riit4me: http://forums.afterdawn.com/thread_view.cfm/422740
As to the ticking sound, I have no idea concerning the specific cause. It could be due to a lot of different things.
I uninstall the Secondary IDE Channel & writer but not the primary IDE Channel as I thought it is not advisable in this Post?
I only want to burn data Dvd to store my big files, is there a good freeware around for that?
|
|
laddyboy
AfterDawn Addict
|
17. December 2006 @ 16:35 |
Link to this message
|
|
|
|
bluewhits
Newbie
|
18. December 2006 @ 10:51 |
Link to this message
|
Originally posted by laddyboy:
@ bluewhits
What program is giving this error message? Is this coming when you attempt to burn a disk? Are you sure you have the same model burner as the previous member? Did you get a message saying the firmware update was successful? If the firmware updating utility gave the error message, you may not have the same model burner.
Any number of programs can ID your drive if you don't know the model number.
DVD Identifier: http://dvd.identifier.cdfreaks.com
ImgBurn: http://www.imgburn.com
Nero InfoTool
etc.
I have tryed the dvd identifier and it does not idetify anything.As when i put a blank DVD-R or +r it does not read them spins a bit then screams and shouts b4 finally giving up.
The thing in witch i said had an error was the link you sent suu about a firmware update.No it was not sucessful as it said it failed to intialise.
Thanks bluewhits
mjl
|
|
laddyboy
AfterDawn Addict
|
18. December 2006 @ 11:04 |
Link to this message
|
|
@bluewhits
When you first startup DVD Identifier, the model and firmware version will appear under the Drive Selection and Drive Write Capabilities dropdown menu. It should be the only thing listed if you only have one drive installed. If you have more than one drive installed, select your burner from the menu and then post back exactly what's displayed.
|
|
bluewhits
Newbie
|
18. December 2006 @ 11:34 |
Link to this message
|
[21:30:23] DVD Identifier V5.0.1
[21:30:23] Initializing Drive Interface [Auto-Select ASPI/SPTI]
[21:30:23] SPTI Drive Interface Successfully Initialized
[21:30:24] No Supported Drives Found (Out Of 1 Available Drive)
[21:30:24] Disc Identification Requires A DVD, HD DVD or Blu-ray Writer
[21:30:24] Manufacturer Database [08-OCT-06@727$93] Loaded From File : (@727$93) Entries Found
[21:30:25] This Version Of 'DVD Identifier' Is Up-To-Date
[21:30:25] The Manufacturer Database Is Up-To-Date
On most of the other stuff it not avalible. And on others it says this onfo will be retrieved from manufactures database
thanks bluewhits
mjl
|
|
laddyboy
AfterDawn Addict
|
18. December 2006 @ 17:43 |
Link to this message
|
|
Does your drive appear under the DVD/CD-ROM Drives category in Device Manager?
|
|
suu
Newbie
|
20. December 2006 @ 01:12 |
Link to this message
|
|
|
|
bluewhits
Newbie
|
21. December 2006 @ 07:00 |
Link to this message
|
Originally posted by laddyboy:
Does your drive appear under the DVD/CD-ROM Drives category in Device Manager?
Yes it says dvd/cd-rw
mjl
|
|
laddyboy
AfterDawn Addict
|
21. December 2006 @ 08:25 |
Link to this message
|
|
@ bluewhits
Is there a model number behind DVD/CDRW?
I thnk you may have DVD reader and CD burner, otherwise known as a combo drive. Combo drives are usually denoted by what you provided. You can burn CDs but not DVDs with this type of drive. It will read both burned CDs and DVDs.
|
|
mgomez
Newbie
|
13. January 2007 @ 09:04 |
Link to this message
|
|
I have the same problem. I have had it for some time now. I burn with maxell or verbatim.It all depends on what mood by burner is in.
I uninstall my IDE's all the time. It works for awhile, but always messes up again. I even bought a new dvd combo, still to no avail.
I have a hp dvd840vj dvd writer internal. I use Clone DVD and Any DVD. Do you think that I might need new firmware. Please help.
gomez
|
|
laddyboy
AfterDawn Addict
|
13. January 2007 @ 12:10 |
Link to this message
|
|
I'm not familiar with that model. The HP 840, yes, but I've never heard of the 840vj. You should be able to go to the HP support site to locate the most up to date firmware. If you purchased this burner as part of a computer system, you may need to go to the computer manufacturers site for updates. Otherwise, just try using the 840i firmware.
|
|
mgomez
Newbie
|
13. January 2007 @ 12:18 |
Link to this message
|
|
It's hp 840j DVD Writer and I bought it at Wal Mart. My other one was only 5 months old. It is getting worse now. I dont think its my buner.I did burn a music cd with maxell and it did great.
gomez
|
|
mgomez
Newbie
|
13. January 2007 @ 12:26 |
Link to this message
|
With my new writer I got a free Nero cd, but I couldn't get it to burn all the way. it would stop half way. Can you point me in the right way. Maybe I need different sofeware. What do you think.
gomez
|
|
laddyboy
AfterDawn Addict
|
13. January 2007 @ 12:39 |
Link to this message
|
Have you tried using Ripit4me? It's totally free. If it works, then the problem is likely with the other software and your system configuration. It doesn't require AnyDVD so make sure AnyDVD is disabled.
http://forums.afterdawn.com/thread_view.cfm/422740
I'm assuming your AnyDVD and Clone are up to date.
You aren't trying to burn at max speed with Clone are you? If so that could be causing the problems you're having. Maxell media is not too good unless it's labeled as Made in Japan. There is also some Verbatim emdia that isn't too good that's recently out. I believe it's only in -R format.
Is DMA mode on for your burner? Here's a guide.
http://forums.afterdawn.com/thread_view.cfm/260038
|
|
mgomez
Newbie
|
13. January 2007 @ 13:29 |
Link to this message
|
|
Yes they are updated and am burning at 12. Thank you for helping me out.
gomez
|
|
mgomez
Newbie
|
13. January 2007 @ 13:52 |
Link to this message
|
|
I think so. Primary IDE Channel Reads.
Device 0
Device Type: Auto Detection
Tranfer Mode: DMA if available
Current Tranfer Mode: Ultra DMA Mode 5
Device 1
Device Type: Auto Detection
Tranfer Mode: DMA if available
Current Tranfer Mode: Not Applicable
Seconary IDE Channel Reads.
Device 0
Device Type: Auto Detection
Tranfer Mode: DMA if available
Current Tranfer Mode: Not applicable
Device 1
Device Type: Auto Detection
Tranfer Mode: DMA if available
Currant Transfer Mode: Ultra DMA mode 2
gomez
|
|
mgomez
Newbie
|
13. January 2007 @ 13:56 |
Link to this message
|
|
I for got do I keep clone dvd.
gomez
|
|
laddyboy
AfterDawn Addict
|
13. January 2007 @ 14:29 |
Link to this message
|
You can keep Clone installed. It shouldn't affect Ripit4me. AnyDVD needs to be disable though. Just right click the red fox AnyDVD icon on the task bar and uncheck the "Enable AnyDVD" by selecting it. The fox should turn gray.
|
|
mgomez
Newbie
|
13. January 2007 @ 14:59 |
Link to this message
|
|
I did install Ripit4me and it keeps flashing Your FixVTS path points to FixVTS1.6 zip, but it should point to FixVTS.exe How do I fix this.
gomez
|
|
laddyboy
AfterDawn Addict
|
14. January 2007 @ 05:46 |
Link to this message
|
Did you unzip the FixVTS file after you downloaded it. The path is pointing to the archive not the actual program file. The Ripit4me installer (see link below) should have installed FixVTS as well.
http://www.ripit4me.org/RipIt4Me%20Installer.exe
|
|
Eugenelx
Newbie
|
1. June 2007 @ 07:31 |
Link to this message
|
Hi, I have the common problem like everyone esle. My windows explorer detects the dvd as a cd drive. And my dvd are read as 0mb,etc. Here's my log:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 11/21/2005 1:48:20 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=169792 bytes, created 3/14/2007 11:43:16 AM
NT-SPTI used
Nero API version: 7.8.5.0
Using interface version: 7.5.0.1
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\NeroVision
Internal Version: 7, 8, 5, 0
Recorder: <SONY DVD RW DRU-710A> Version: BYX5 - HA 1 TA 0 - 7.8.5.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD2500JB-00REA0 20.0 viamraid Port 4 ID 1 DMA: Off
DiskPeripheral : ST3160023A 8.01 viamraid Port 4 ID 2 DMA: Off
=== CDRom-Device-Map ===
SONY DVD RW DRU-710A F: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1047916kB)
Free physical memory: 486MB (497964kB)
Memory in use : 52
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
30.4.2007
NeroAPI
3:21:27 PM #1 Phase 111 File APIProgress.cpp, Line 285
DVD-Video files sorted
3:21:27 PM #2 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
3:21:28 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
3:21:28 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
3:21:28 PM #5 Text 0 File Burncd.cpp, Line 3499
Turn on Disc-At-Once, using DVD media
3:21:28 PM #6 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 801839 (178:11.14, 1566MB)
3:21:28 PM #7 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
3:21:28 PM #8 Text 0 File DlgWaitCD.cpp, Line 2949
Recorder: SONY DVD RW DRU-710A, Media type: DVD+R
Disc Manufacturer ID: PRODISC, Media Type ID: R03, Product revision number: 3
Disc Application Code: 0, Extended Information Indicators: 3
3:21:28 PM #9 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
3:21:28 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 801840 (801840) = #801840/178:11.15
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 801840 blocks [F: SONY DVD RW DRU-710A]
--------------------------------------------------------------
3:21:29 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [F: SONY DVD RW DRU-710A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1642168320, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 801840 | 0 | 0x00
801840 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
3:21:29 PM #12 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
3:21:29 PM #13 Text 0 File Burncd.cpp, Line 4278
Caching options: cache CDRom or Network-No, small files-Yes (<32KB)
3:21:29 PM #14 Phase 24 File APIProgress.cpp, Line 285
Caching of files started
3:21:29 PM #15 Text 0 File Burncd.cpp, Line 4397
Cache writing successful.
3:21:29 PM #16 Phase 25 File APIProgress.cpp, Line 285
Caching of files completed
3:21:29 PM #17 Phase 28 File APIProgress.cpp, Line 285
Speed measurement started
3:21:29 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:21:29 PM #19 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 590400
3:22:12 PM #20 Text 0 File WriterStatus.cpp, Line 113
<F: SONY DVD RW DRU-710A> start writing Lead-Out at LBA 801840 (C3C30h), length 0 blocks
3:22:12 PM #21 Phase 29 File APIProgress.cpp, Line 285
Speed measurement completed: 26.8x (37,012 KB/s)
3:22:13 PM #22 Phase 36 File APIProgress.cpp, Line 285
Burn process started at 6x (8,310 KB/s)
3:22:13 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:22:13 PM #24 Text 0 File Cdrdrv.cpp, Line 9856
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: PRODISC.
Media type ID: R03
Product revision number: 3
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 50 52 4F 44 49 - 53 43 00 52 30 33 03 38 ...PRODISC.R03.8
23 54 37 12 02 42 72 02 - 86 6B 15 15 0B 0A 08 08 #T7..Br.?k......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
3:22:13 PM #25 Text 0 File DVDR.cpp, Line 6974
Drive: SONY DVD RW DRU-710A
Book Type request [LO], rev 1: DVD-ROM
Changing the Book Type was finished successfully, return code 0
3:22:13 PM #26 CDR -1207 File DVDR.cpp, Line 6352
Book Type automatically set to: DVD-ROM
3:22:13 PM #27 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 0
DVD high compatibility mode: Yes
3:22:13 PM #28 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
3:26:20 PM #29 Text 0 File WriterStatus.cpp, Line 113
<F: SONY DVD RW DRU-710A> start writing Lead-Out at LBA 801840 (C3C30h), length 0 blocks
3:26:46 PM #30 Text 0 File DVDPlusRW.cpp, Line 934
EndDAO: Last written address 801840
3:26:46 PM #31 Text 0 File DVDR.cpp, Line 6974
Drive: SONY DVD RW DRU-710A
Book Type request [LO], rev 1: DVD+R
Changing the Book Type was finished successfully, return code 0
3:26:46 PM #32 Phase 37 File APIProgress.cpp, Line 285
Burn process completed successfully at 6x (8,310 KB/s)
3:26:47 PM #33 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
3:26:55 PM #34 SPTI -1079 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1079)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x53
Sense Qual: 0x00
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 53
3:27:02 PM #35 SPTI -1079 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1079)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x53
Sense Qual: 0x00
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 53
3:27:02 PM #36 Text 0 File Cdrdrv.cpp, Line 11214
DriveLocker: UnLockVolume completed
3:27:03 PM #37 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 11/21/2005 1:48:20 PM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
1C82-A0K5-19E5-MAAX-400E-7C89-****
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 11/21/2005 1:48:20 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=169792 bytes, created 3/14/2007 11:43:16 AM
NT-SPTI used
Nero API version: 7.8.5.0
Using interface version: 7.5.0.1
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\NeroVision
Internal Version: 7, 8, 5, 0
Recorder: <SONY DVD RW DRU-710A> Version: BYX5 - HA 1 TA 0 - 7.8.5.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD2500JB-00REA0 20.0 viamraid Port 4 ID 1 DMA: Off
DiskPeripheral : ST3160023A 8.01 viamraid Port 4 ID 2 DMA: Off
=== CDRom-Device-Map ===
SONY DVD RW DRU-710A F: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1047916kB)
Free physical memory: 485MB (496760kB)
Memory in use : 52
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
1.5.2007
NeroAPI
2:25:07 PM #1 Phase 111 File APIProgress.cpp, Line 285
DVD-Video files sorted
2:25:08 PM #2 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
2:25:08 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
2:25:08 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
2:25:08 PM #5 Text 0 File Burncd.cpp, Line 3499
Turn on Disc-At-Once, using DVD media
2:25:09 PM #6 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2080783 (462:23.58, 4064MB)
2:25:09 PM #7 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
2:25:09 PM #8 Text 0 File DlgWaitCD.cpp, Line 2949
Recorder: SONY DVD RW DRU-710A, Media type: DVD+R
Disc Manufacturer ID: PRODISC, Media Type ID: R03, Product revision number: 3
Disc Application Code: 0, Extended Information Indicators: 3
2:25:09 PM #9 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:25:09 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2080784 (2080784) = #2080784/462:23.59
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2080784 blocks [F: SONY DVD RW DRU-710A]
--------------------------------------------------------------
2:25:09 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [F: SONY DVD RW DRU-710A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4261445632, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2080784 | 0 | 0x00
2080784 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
2:25:09 PM #12 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
2:25:09 PM #13 Text 0 File Burncd.cpp, Line 4278
Caching options: cache CDRom or Network-No, small files-Yes (<32KB)
2:25:09 PM #14 Phase 24 File APIProgress.cpp, Line 285
Caching of files started
2:25:09 PM #15 Text 0 File Burncd.cpp, Line 4397
Cache writing successful.
2:25:09 PM #16 Phase 25 File APIProgress.cpp, Line 285
Caching of files completed
2:25:09 PM #17 Phase 36 File APIProgress.cpp, Line 285
Burn process started at 6x (8,310 KB/s)
2:25:09 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:25:09 PM #19 Text 0 File Cdrdrv.cpp, Line 9856
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: PRODISC.
Media type ID: R03
Product revision number: 3
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 50 52 4F 44 49 - 53 43 00 52 30 33 03 38 ...PRODISC.R03.8
23 54 37 12 02 42 72 02 - 86 6B 15 15 0B 0A 08 08 #T7..Br.?k......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
2:25:09 PM #20 Text 0 File DVDR.cpp, Line 6974
Drive: SONY DVD RW DRU-710A
Book Type request [LO], rev 1: DVD-ROM
Changing the Book Type was finished successfully, return code 0
2:25:09 PM #21 CDR -1207 File DVDR.cpp, Line 6352
Book Type automatically set to: DVD-ROM
2:25:09 PM #22 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 0
DVD high compatibility mode: Yes
2:25:09 PM #23 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
2:34:20 PM #24 Text 0 File WriterStatus.cpp, Line 113
<F: SONY DVD RW DRU-710A> start writing Lead-Out at LBA 2080784 (1FC010h), length 0 blocks
2:34:48 PM #25 Text 0 File DVDPlusRW.cpp, Line 934
EndDAO: Last written address 2080784
2:34:48 PM #26 Text 0 File DVDR.cpp, Line 6974
Drive: SONY DVD RW DRU-710A
Book Type request [LO], rev 1: DVD+R
Changing the Book Type was finished successfully, return code 0
2:34:48 PM #27 Phase 37 File APIProgress.cpp, Line 285
Burn process completed successfully at 6x (8,310 KB/s)
2:34:49 PM #28 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
2:34:57 PM #29 SPTI -1079 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1079)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x53
Sense Qual: 0x00
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 53
2:35:02 PM #30 SPTI -1079 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1079)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x53
Sense Qual: 0x00
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 53
2:35:02 PM #31 Text 0 File Cdrdrv.cpp, Line 11214
DriveLocker: UnLockVolume completed
2:35:03 PM #32 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 11/21/2005 1:48:20 PM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
You are my last source of hope.Thx!
|
|
Eugenelx
Newbie
|
1. June 2007 @ 07:53 |
Link to this message
|
Originally posted by Eugenelx:
Hi, I have the common problem like everyone esle. My windows explorer detects the dvd as a cd drive. And my dvd are read as 0mb,etc. Here's my log:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 11/21/2005 1:48:20 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=169792 bytes, created 3/14/2007 11:43:16 AM
NT-SPTI used
Nero API version: 7.8.5.0
Using interface version: 7.5.0.1
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\NeroVision
Internal Version: 7, 8, 5, 0
Recorder: <SONY DVD RW DRU-710A> Version: BYX5 - HA 1 TA 0 - 7.8.5.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD2500JB-00REA0 20.0 viamraid Port 4 ID 1 DMA: Off
DiskPeripheral : ST3160023A 8.01 viamraid Port 4 ID 2 DMA: Off
=== CDRom-Device-Map ===
SONY DVD RW DRU-710A F: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1047916kB)
Free physical memory: 486MB (497964kB)
Memory in use : 52
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
30.4.2007
NeroAPI
3:21:27 PM #1 Phase 111 File APIProgress.cpp, Line 285
DVD-Video files sorted
3:21:27 PM #2 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
3:21:28 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
3:21:28 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
3:21:28 PM #5 Text 0 File Burncd.cpp, Line 3499
Turn on Disc-At-Once, using DVD media
3:21:28 PM #6 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 801839 (178:11.14, 1566MB)
3:21:28 PM #7 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
3:21:28 PM #8 Text 0 File DlgWaitCD.cpp, Line 2949
Recorder: SONY DVD RW DRU-710A, Media type: DVD+R
Disc Manufacturer ID: PRODISC, Media Type ID: R03, Product revision number: 3
Disc Application Code: 0, Extended Information Indicators: 3
3:21:28 PM #9 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
3:21:28 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 801840 (801840) = #801840/178:11.15
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 801840 blocks [F: SONY DVD RW DRU-710A]
--------------------------------------------------------------
3:21:29 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [F: SONY DVD RW DRU-710A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1642168320, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 801840 | 0 | 0x00
801840 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
3:21:29 PM #12 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
3:21:29 PM #13 Text 0 File Burncd.cpp, Line 4278
Caching options: cache CDRom or Network-No, small files-Yes (<32KB)
3:21:29 PM #14 Phase 24 File APIProgress.cpp, Line 285
Caching of files started
3:21:29 PM #15 Text 0 File Burncd.cpp, Line 4397
Cache writing successful.
3:21:29 PM #16 Phase 25 File APIProgress.cpp, Line 285
Caching of files completed
3:21:29 PM #17 Phase 28 File APIProgress.cpp, Line 285
Speed measurement started
3:21:29 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:21:29 PM #19 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 590400
3:22:12 PM #20 Text 0 File WriterStatus.cpp, Line 113
<F: SONY DVD RW DRU-710A> start writing Lead-Out at LBA 801840 (C3C30h), length 0 blocks
3:22:12 PM #21 Phase 29 File APIProgress.cpp, Line 285
Speed measurement completed: 26.8x (37,012 KB/s)
3:22:13 PM #22 Phase 36 File APIProgress.cpp, Line 285
Burn process started at 6x (8,310 KB/s)
3:22:13 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:22:13 PM #24 Text 0 File Cdrdrv.cpp, Line 9856
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: PRODISC.
Media type ID: R03
Product revision number: 3
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 50 52 4F 44 49 - 53 43 00 52 30 33 03 38 ...PRODISC.R03.8
23 54 37 12 02 42 72 02 - 86 6B 15 15 0B 0A 08 08 #T7..Br.?k......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
3:22:13 PM #25 Text 0 File DVDR.cpp, Line 6974
Drive: SONY DVD RW DRU-710A
Book Type request [LO], rev 1: DVD-ROM
Changing the Book Type was finished successfully, return code 0
3:22:13 PM #26 CDR -1207 File DVDR.cpp, Line 6352
Book Type automatically set to: DVD-ROM
3:22:13 PM #27 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 0
DVD high compatibility mode: Yes
3:22:13 PM #28 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
3:26:20 PM #29 Text 0 File WriterStatus.cpp, Line 113
<F: SONY DVD RW DRU-710A> start writing Lead-Out at LBA 801840 (C3C30h), length 0 blocks
3:26:46 PM #30 Text 0 File DVDPlusRW.cpp, Line 934
EndDAO: Last written address 801840
3:26:46 PM #31 Text 0 File DVDR.cpp, Line 6974
Drive: SONY DVD RW DRU-710A
Book Type request [LO], rev 1: DVD+R
Changing the Book Type was finished successfully, return code 0
3:26:46 PM #32 Phase 37 File APIProgress.cpp, Line 285
Burn process completed successfully at 6x (8,310 KB/s)
3:26:47 PM #33 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
3:26:55 PM #34 SPTI -1079 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1079)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x53
Sense Qual: 0x00
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 53
3:27:02 PM #35 SPTI -1079 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1079)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x53
Sense Qual: 0x00
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 53
3:27:02 PM #36 Text 0 File Cdrdrv.cpp, Line 11214
DriveLocker: UnLockVolume completed
3:27:03 PM #37 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 11/21/2005 1:48:20 PM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
1C82-A0K5-19E5-MAAX-400E-7C89-****
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 11/21/2005 1:48:20 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=169792 bytes, created 3/14/2007 11:43:16 AM
NT-SPTI used
Nero API version: 7.8.5.0
Using interface version: 7.5.0.1
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\NeroVision
Internal Version: 7, 8, 5, 0
Recorder: <SONY DVD RW DRU-710A> Version: BYX5 - HA 1 TA 0 - 7.8.5.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD2500JB-00REA0 20.0 viamraid Port 4 ID 1 DMA: Off
DiskPeripheral : ST3160023A 8.01 viamraid Port 4 ID 2 DMA: Off
=== CDRom-Device-Map ===
SONY DVD RW DRU-710A F: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1047916kB)
Free physical memory: 485MB (496760kB)
Memory in use : 52
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
1.5.2007
NeroAPI
2:25:07 PM #1 Phase 111 File APIProgress.cpp, Line 285
DVD-Video files sorted
2:25:08 PM #2 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
2:25:08 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
2:25:08 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
2:25:08 PM #5 Text 0 File Burncd.cpp, Line 3499
Turn on Disc-At-Once, using DVD media
2:25:09 PM #6 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2080783 (462:23.58, 4064MB)
2:25:09 PM #7 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
2:25:09 PM #8 Text 0 File DlgWaitCD.cpp, Line 2949
Recorder: SONY DVD RW DRU-710A, Media type: DVD+R
Disc Manufacturer ID: PRODISC, Media Type ID: R03, Product revision number: 3
Disc Application Code: 0, Extended Information Indicators: 3
2:25:09 PM #9 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:25:09 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2080784 (2080784) = #2080784/462:23.59
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2080784 blocks [F: SONY DVD RW DRU-710A]
--------------------------------------------------------------
2:25:09 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [F: SONY DVD RW DRU-710A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4261445632, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2080784 | 0 | 0x00
2080784 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
2:25:09 PM #12 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
2:25:09 PM #13 Text 0 File Burncd.cpp, Line 4278
Caching options: cache CDRom or Network-No, small files-Yes (<32KB)
2:25:09 PM #14 Phase 24 File APIProgress.cpp, Line 285
Caching of files started
2:25:09 PM #15 Text 0 File Burncd.cpp, Line 4397
Cache writing successful.
2:25:09 PM #16 Phase 25 File APIProgress.cpp, Line 285
Caching of files completed
2:25:09 PM #17 Phase 36 File APIProgress.cpp, Line 285
Burn process started at 6x (8,310 KB/s)
2:25:09 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:25:09 PM #19 Text 0 File Cdrdrv.cpp, Line 9856
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: PRODISC.
Media type ID: R03
Product revision number: 3
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 50 52 4F 44 49 - 53 43 00 52 30 33 03 38 ...PRODISC.R03.8
23 54 37 12 02 42 72 02 - 86 6B 15 15 0B 0A 08 08 #T7..Br.?k......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
2:25:09 PM #20 Text 0 File DVDR.cpp, Line 6974
Drive: SONY DVD RW DRU-710A
Book Type request [LO], rev 1: DVD-ROM
Changing the Book Type was finished successfully, return code 0
2:25:09 PM #21 CDR -1207 File DVDR.cpp, Line 6352
Book Type automatically set to: DVD-ROM
2:25:09 PM #22 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 0
DVD high compatibility mode: Yes
2:25:09 PM #23 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
2:34:20 PM #24 Text 0 File WriterStatus.cpp, Line 113
<F: SONY DVD RW DRU-710A> start writing Lead-Out at LBA 2080784 (1FC010h), length 0 blocks
2:34:48 PM #25 Text 0 File DVDPlusRW.cpp, Line 934
EndDAO: Last written address 2080784
2:34:48 PM #26 Text 0 File DVDR.cpp, Line 6974
Drive: SONY DVD RW DRU-710A
Book Type request [LO], rev 1: DVD+R
Changing the Book Type was finished successfully, return code 0
2:34:48 PM #27 Phase 37 File APIProgress.cpp, Line 285
Burn process completed successfully at 6x (8,310 KB/s)
2:34:49 PM #28 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
2:34:57 PM #29 SPTI -1079 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1079)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x53
Sense Qual: 0x00
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 53
2:35:02 PM #30 SPTI -1079 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1079)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x53
Sense Qual: 0x00
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 53
2:35:02 PM #31 Text 0 File Cdrdrv.cpp, Line 11214
DriveLocker: UnLockVolume completed
2:35:03 PM #32 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 11/21/2005 1:48:20 PM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
You are my last source of hope.Thx!
----------------------------------------------------------------------------
Unique Disc Identifier : [DVD+R:CMC MAG-E01-000]
----------------------------------------------------------------------------
Disc & Book Type : [DVD+R] - [DVD+R]
Manufacturer Name : [CMC Magnetics Corp.]
Manufacturer ID : [CMC MAG]
Media Type ID : [E01]
Product Revision : [Not Specified]
Blank Disc Capacity : [Not Supported By Method 2]
Recording Speeds : [1x-2.4x , 4x , 6x-8x]
[Method 2 Might Not Always Detect All
PHilips Disc.
----------------------------------------------------------------------------
Unique Disc Identifier : [DVD+R:SONY-D21-000]
----------------------------------------------------------------------------
Disc & Book Type : [DVD+R] - [DVD+R]
Manufacturer Name : [Sony Recording Media Co.]
Manufacturer ID : [SONY]
Media Type ID : [D21]
Product Revision : [Not Specified]
Blank Disc Capacity : [Not Supported By Method 2]
Recording Speeds : [1x-2.4x , 4x , 6x-8x , 6x-16x]
[Method 2 Might Not Always Detect All Speeds]
Used 2 dvds
|
|
laddyboy
AfterDawn Addict
|
1. June 2007 @ 12:42 |
Link to this message
|
The blank DVDs you're using were made by Prodisc in the logs you posted. It's pretty low on the quality scale. The additional info you provided in the second post says the media is made by CMC Mag, also a very low quality supplier of media. The Sony D21 media is somewhat OK. However your burner is not a new one and may have difficulty with some of the 16X media even with up to date firmware. While this may not be the cause of your difficulties, it might be as well. Try to use good quality media like Verbatim, Taiyo Yuden, and media labeled as Made in Japan, preferably Sony or Fuji.
You migth also try creating an image (ISO) file with your authoring software and then burning that ISO image file with ImgBurn. That'd eliminate Nero from the equation as a troubleshooting item.
http://www.imgburn.com
Let us know how you make out.
If you have access to another system, try installing your burner in that system and see if it works there.
|
|
Advertisement
|
|
|
AfterDawn Addict
|
2. June 2007 @ 05:03 |
Link to this message
|
|
boy there are all these newbies high jacking this thread....... can't tell what person to help! anyway..... just want to comment for all who are having a problem where your drive is not recognizing a disk! I was talking to another newbie with the same problem in a different forum (Media forum) and this person had a laptop.... he/she must have put in a foreign disk which changed the REGION CODE of the drive! So when he/she put in a disk it wouldn't recognize the disk at all..... check your REGION CODE for your drive and make sure it has the appropriate REGION set! here's how:
click on MY COMPUTER/select the drive you want to check by right clicking and hit PROPERTIES/HARDWARE TAB/click the appriate drive you want to check/hit PROPERTIES button near the bottom/DVD REGION
This message has been edited since posting. Last time this message was edited on 2. June 2007 @ 05:03
|
|
