|
Nokia Dbox2
|
|
Please note that the forum rules have changed. Posting of new codes is no longer allowed. See this thread for more information.
|
|
kewlguy98
Junior Member
|
18. April 2008 @ 08:30 |
Link to this message
|
Originally posted by micksy:
Originally posted by kewlguy98:
nthell ireland
00 =9c12470be96f9f7a
01 =923eeb9311198606
as of 10am 18/4
hello kewlguy,my code is 01 fo d9 2c f6 b8 d3 d1 2f
i usally only have 2 change 1 or 2 numbers
thats (pure nthell) codes 01 code is f0 d9 2c f6 A8 d3 d1 2f
|
|
Advertisement
|
 |
|
|
|
anilboro
Newbie
|
18. April 2008 @ 09:25 |
Link to this message
|
hi there my dbox2 is now working. but i am experiencing a couple of problems. one after viewing encrypted channels for a while the dbox will freeze i will change the channel and a message will appear "error this channel is not available" so i have to restart the dbox and the encrypted channels will work again. i have found a way of gettin out of this problem and that is if i change the epg setttings to off this makes the box stop freezing less often. my other problem is that a couple of enrypted channels will work now and again theses are the same channels to, these are virgin1 and +1 setanta sports 1, nasn, the hits and tmf. why is this and what can i do about it.
|
|
billie22
Junior Member
|
18. April 2008 @ 09:53 |
Link to this message
|
|
can someone PLEASE tell me is this box in debug or Kein mode because I don't know! When I start my set up the LCD screen has nothing on it,the TV reads Herzlich Willkommen when I translate means Cordially welcomes,I can do nothing with the remote (is this box in debug or Kein mode) Please help so I know where to start Debug or flash or what else it is I do????
Billie22
|
Junior Member
|
18. April 2008 @ 10:00 |
Link to this message
|
|
Hi all i have just spent the last 3.5 hours reading these threads as my mrs phoned me to tell me we had no channels again
i have hopefully learnt what i need (fingers crossed) but if not i will be back with loads of ?
i am a complete beginner in this ive never had to do anything apart from reboot heres hopin :-)
|
|
stewson
Suspended permanently
|
18. April 2008 @ 10:10 |
Link to this message
|
|
hello to all iv been reading this thread all week and tryed to follow advice without asking what to do as many ppl seem to ask the same questions, well i could nt get my box going so i searched around more well i found a chap who could help me and he did, he sorted my boxes out for me yesterday and they are fine im so happy he did it as id never have got it going i found him here if your the same as me then go to this link it could be just what you need
edited by ddp
This message has been edited since posting. Last time this message was edited on 21. April 2008 @ 16:49
|
|
awmair
Newbie
|
18. April 2008 @ 10:38 |
Link to this message
|
OK
here I go again, can someone help me?
Model is Nokia DBox
sportster 2002.net
release rc006
jboot 1.2.0
moded by learn to fly.
Stopped working channels go black screen.
How do I get it to work, can do all except where it says to reboot, can't find this instruction or setting in the box menu.
I know it's frustrating to go over something again and again but any help would be great.
Thanks guys.
24 Hours in a day and 24 cans in a case - coincidence I don't think so
|
|
turner123
Suspended permanently
|
18. April 2008 @ 10:40 |
Link to this message
|
Originally posted by awmair:
OK
here I go again, can someone help me?
Model is Nokia DBox
sportster 2002.net
release rc006
jboot 1.2.0
moded by learn to fly.
Stopped working channels go black screen.
How do I get it to work, can do all except where it says to reboot, can't find this instruction or setting in the box menu.
I know it's frustrating to go over something again and again but any help would be great.
Thanks guys.
reflash it with a new image or put the margraroms in that will sort out the updated keys automatic
|
|
awmair
Newbie
|
18. April 2008 @ 10:44 |
Link to this message
|
|
WHAT ARE THE MARGRAROMS?
SORRY
24 Hours in a day and 24 cans in a case - coincidence I don't think so
|
|
turner123
Suspended permanently
|
18. April 2008 @ 10:46 |
Link to this message
|
Originally posted by awmair:
WHAT ARE THE MARGRAROMS?
SORRY
sorry i spelt it wrong nargrarom 7 10 and 11 you need
|
|
turner123
Suspended permanently
|
18. April 2008 @ 10:48 |
Link to this message
|
Originally posted by turner123:
Originally posted by awmair:
WHAT ARE THE MARGRAROMS?
SORRY
sorry i spelt it wrong nargrarom 7 10 and 11 you need
nagrarom 7 10 11 follow the link below and you can get them you then have to ftp them across to the dbox via pc
|
|
awmair
Newbie
|
18. April 2008 @ 10:51 |
Link to this message
|
|
which ones do I take from here, they dont all look like prgm files
24 Hours in a day and 24 cans in a case - coincidence I don't think so
|
|
bryandir
Member
|
18. April 2008 @ 12:01 |
Link to this message
|
hi guys!!
is a replay box (pvr-c100) the same as a replay lite?do i use the same software to flash it ect?
cheers!
|
|
turner123
Suspended permanently
|
18. April 2008 @ 12:37 |
Link to this message
|
|
hello guys is there any1 in ere have a tut for a 4000dvb talk back location ? iv searched all day to n avail any help would be good thanks
|
|
tezzer123
Suspended due to non-functional email address
|
18. April 2008 @ 14:34 |
Link to this message
|
HI ALL
could anyone tell me how to put in the new rom 7 10 11 bin file
i have a cable etc to pc .
so that the keys auto roll
|
|
turner123
Suspended permanently
|
18. April 2008 @ 14:37 |
Link to this message
|
Originally posted by tezzer123:
HI ALL
could anyone tell me how to put in the new rom 7 10 11 bin file
i have a cable etc to pc .
so that the keys auto roll
read back through the posts already basiclly just ftp drag and drop to teh dbox
|
|
turner123
Suspended permanently
|
18. April 2008 @ 15:03 |
Link to this message
|
please can any1 help me i am a member of digital world and i need a file but i dont have enought post!!!!
Scientific Atlanta 4000DVB
Method one:
Forcing the chip into sleep mode. Take the end of the resistor marked with the red dot to ground with a length of wire. The screening can is a convenient ground.
Attached Images SA DVB4000 1.jpg (505.1 KB, 508 views
http://forums.digitalworldz.co.uk/showthread.php?t=45342
it the one at the botton of the page thankyou so much for the help
please pm if you have it thanks
|
|
bryandir
Member
|
18. April 2008 @ 15:10 |
Link to this message
|
|
hi guys,do you need to drag and drop ALL the rom 7 10 and 11
i dropped only the 7 one into my dbox it has lasted over the last 2 key changes...
|
|
carlhoper
Newbie
|
18. April 2008 @ 15:17 |
Link to this message
|
All that have been posting messages containing useful information - thank you very much!!!!
I finally got up and running.
The waiting for time issue was fixed by just doing a scan.
Furthermore I reiterate the point many people have made - get the nagra files from the Bigmaq toolbar.
I have been using FTP via DOS command to move things around on my DBox.
However for those of you who want an easy way to communicate with the DBox, connect your Dbox to your wireless router and assign an IP address within the routers range.
Then download an FTP client with a GUI - CuteFTP is good.
Using an FTP client you'll be able to easily edit you keys file if need be, and more to the point move files around.
I thought I'd at my 2pence worth - but not doubt i'm standing on the shoulders of giants.
|
|
daguvnor
Newbie
|
18. April 2008 @ 16:50 |
Link to this message
|
just to say that if anyone is still having probs with VM rolling keys,just download Bigmaq toolbar then from there click on: updates/fixes,Dbox fixes, 2x chipset(for Nokia).Then download and install the all new Laky-pro-1 image,it has auto update fully installed and will autoroll the keys if/when VM change them.I have done this myself and after doing a channel scan i get all channels without having to manually input new keys.
If some people are still unsure how to install a new image there are plenty of tutorials on this site to help.Just make sure you have 1) a crossover/ethernet cable. 2) a network card or router. 3) a FTP prog like flashfxp/cute ftp or similar (can be done also through IE).
I hope this helps a few people out.
|
|
heike
Newbie
|
18. April 2008 @ 16:57 |
Link to this message
|
HOPE THIS HELPS
i have flashed four dbox2 boxes today so here is how to
you will need
laky-pro 1(from BIGMAQ tool-bar)
Image flashing assistant (GOOGLE)
null-modem cable
patch/crossover-cable
Now we need to setup the dbox to use ftp easily via your existing patch/crossover-cable.
1.Get your dbox remote in your hand press dbox.
2.Select the settings menu press ok.
3.Select network then press ok.
4.Change ip address to 192.168.0.100
5.Change subnet mask to 255.255.255.0
6.change default gateway to 192.168.254.2
7.Save all setting press the home button.
Now plug your patch/crossover-cable into the back off the dbox.
Some off you might not have a rj45 lead spare, So use the one that the routers got
plugged into.
It the lead that plugs into your current computer network card to the broadband box.
Now we need to setup your computer to talk to the dbox via ftp
On your computer press the following (windows only)
1.Press Start
2.Press my network places
3.Press view network connections
4.Highlight local area connection.
5.Right click select properties.
6.Scroll down to tcp/ip
7.press enter.
8.Select the use the following ip.
9.Enter ip address 192.168.0.105
10.Enter subnet mask 255.255.255.0
11. Enter default gateway 192.169.254.2
Press ok shuts the window then press ok again shuts all network windows.
using your Image flashing assistant flash you dbox2 with the NEW laky-pro image
when finished flashing turn of the Image flashing assistant
un-plug your box from the mains (then restart)
select English
press blue button
select town (box will re-boot)
scan for channels
done!
ps turn off your firewall
good luck
|
Senior Member
|
18. April 2008 @ 17:31 |
Link to this message
|
Originally posted by stewson:
hello to all iv been reading this thread all week and tryed to follow advice without asking what to do as many ppl seem to ask the same questions, well i could nt get my box going so i searched around more well i found a chap who could help me and he did, he sorted my boxes out for me yesterday and they are fine im so happy he did it as id never have got it going i found him here if your the same as me then go to this link it could be just what you need
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?V...8693873
dont pay for it, what he is offering is availble free.
|
Junior Member
|
18. April 2008 @ 17:35 |
Link to this message
|
Originally posted by tezzer123:
HI ALL
could anyone tell me how to put in the new rom 7 10 11 bin file
i have a cable etc to pc .
so that the keys auto roll
Using Flash fxp go to the d box side of the proramme and right click on each nagra rom file you need to chandge and transfer them to a pre made back up folder on your desktop (old roms) or something then delete all of these files from the d box ,,then go to your pc and transfer back across the new rom files and reboot your box this should do it get the new files from bigmaq toolbar
|
|
prasiet
Junior Member
|
18. April 2008 @ 17:37 |
Link to this message
|
Originally posted by zappp64:
Originally posted by stewson:
hello to all iv been reading this thread all week and tryed to follow advice without asking what to do as many ppl seem to ask the same questions, well i could nt get my box going so i searched around more well i found a chap who could help me and he did, he sorted my boxes out for me yesterday and they are fine im so happy he did it as id never have got it going i found him here if your the same as me then go to this link it could be just what you need
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?V...8693873
dont pay for it, what he is offering is availble free.
lol
i'll d it for half the price..............
|
Junior Member
|
18. April 2008 @ 17:42 |
Link to this message
|
Originally posted by zappp64:
Originally posted by stewson:
hello to all iv been reading this thread all week and tryed to follow advice without asking what to do as many ppl seem to ask the same questions, well i could nt get my box going so i searched around more well i found a chap who could help me and he did, he sorted my boxes out for me yesterday and they are fine im so happy he did it as id never have got it going i found him here if your the same as me then go to this link it could be just what you need
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?V...8693873
dont pay for it, what he is offering is availble free.
fuck that get your self the PT-1 d box guide or the guide off bigmaq tool bar and do it your self you'll be surprised how easy it is i've fixed 6 or 7 boxes this week and would not charge a penny we are a community helping each other thats the whole buzz
http://www.4shared.com/dir/4221132/a307c346/sharing.html
here's a link i have for a d box guide messing with this stuff is not easy but a bit of a challenge
|
|
Advertisement
|
|
|
|
prasiet
Junior Member
|
18. April 2008 @ 17:48 |
Link to this message
|
Originally posted by Scoopdog:
Originally posted by zappp64:
Originally posted by stewson:
hello to all iv been reading this thread all week and tryed to follow advice without asking what to do as many ppl seem to ask the same questions, well i could nt get my box going so i searched around more well i found a chap who could help me and he did, he sorted my boxes out for me yesterday and they are fine im so happy he did it as id never have got it going i found him here if your the same as me then go to this link it could be just what you need
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?V...8693873
dont pay for it, what he is offering is availble free.
fuck that get your self the PT-1 d box guide or the guide off bigmaq tool bar and do it your self you'll be surprised how easy it is i've fixed 6 or 7 boxes this week and would not charge a penny we are a community helping each other thats the whole buzz
http://www.4shared.com/dir/4221132/a307c346/sharing.html
here's a link i have for a d box guide messing with this stuff is not easy but a bit of a challenge
exactly.
thing is that people will pay for free info
just read the previous posts and the anwsers are there
|
